Potential-Dependent Passivation of Zinc Metal in a Sulfate-Based Aqueous Electrolyte.

Owing to its abundance, high theoretical capacity, and low electrode potential, zinc is one of the most important metallic anodes for primary and secondary batteries such as alkaline and zinc-air batteries. In the operation of zinc-based batteries, passivation of the anode surface plays an essential role because the electrode potential of zinc is slightly below that of the hydrogen evolution reaction. Therefore, it is important to scrutinize the nature of the passivation film to achieve anticorrosion inside batteries. Herein, the potential-dependent formation and removal of the passivation film during the deposition and dissolution of zinc metal in aqueous electrolytes are detected via electrochemical quartz crystal microbalance analysis. Film formation was not noticeable in hydroxide-based electrolytes; however, sulfate-based electrolytes induced potential-dependent formation and removal of the passivation film, enabling a superior coulombic efficiency of 99.37% and significantly reducing the rate of corrosion of the zinc-metal anodes. These observations provide insights into the development of advanced electrolytes for safe and stable energy-storage devices based on zinc-metal anodes.

Low Serum Vitamin D Levels May Contribute to Gastric Dysmotility in de novo Parkinson's Disease.

BACKGROUND AND OBJECTIVES: Gastrointestinal dysfunction is a common non motor symptom in Parkinson's disease (PD). However, the potential association between vitamin D and gastroparesis in PD has not been previously investigated. The aim of this study was to compare vitamin D levels between drug-naive de novo PD patients with normal gastric emptying and those with delayed gastric emptying. METHODS: Fifty-one patients with drug-naive de novo PD and 20 age-matched healthy controls were enrolled in this study. Gastric emptying time (GET) was assessed by scintigraphy, and gastric emptying half-time (T1/2) was determined. The PD patients were divided into a delayed-GET group and a normal-GET group. RESULTS: The serum 25-hydroxyvitamin D3 levels were decreased in the delayed-GET group compared with the normal-GET and control groups (11.59 ± 4.90 vs. 19.43 ± 6.91 and 32.69 ± 4.93, respectively, p < 0.01). In the multivariate model, the serum 25-hydroxyvitamin D3 level was independently associated with delayed gastric emptying in PD patients. CONCLUSIONS: Vitamin D status may be an independent factor for gastric dysmotility in PD. Although the underlying mechanism remains to be characterized, vitamin D status may play a role in the pathogenesis of delayed gastric emptying in drug-naive PD.

Efficacy and safety of deferasirox estimated by serum ferritin and labile plasma iron levels in patients with aplastic anemia, myelodysplastic syndrome, or acute myeloid leukemia with transfusional iron overload.

BACKGROUND: Patients receiving red blood cell (RBC) transfusions are at risk of iron overload, which can cause significant organ damage and is an important cause of morbidity and mortality. STUDY DESIGN AND METHODS: This study was an open-label, single-arm, prospective clinical study to evaluate the efficacy and safety of deferasirox (DFX) in patients with aplastic anemia (AA), myelodysplastic syndrome (MDS), or acute myeloid leukemia (AML). Patients with serum ferritin levels of at least 1000 ng/mL and ongoing transfusion requirements were enrolled. DFX was administered for up to 1 year. A total of 100 patients were enrolled. RESULTS: Serum ferritin levels decreased significantly following treatment (from 2000 to 1650 ng/mL, p = 0.004). The median absolute reduction in serum ferritin levels was -65 ng/mL in AA (p = 0.037), -647 ng/mL in lower-risk MDS (MDS-LR; p = 0.007), and -552 ng/mL in higher-risk MDS (MDS-HR)/AML (p = 0.482). Mean labile plasma iron (LPI) levels decreased from 0.24 µmol/L at baseline to 0.03 µmol/L at 1 year in all patients (p = 0.036). The mean LPI reduction in each group was -0.17 µmol/L in AA, -0.21 µmol/L in MDS-LR, and -0.30 µmol/L in MDS-HR/AML. Gastrointestinal disorders were commonly observed among groups (16.0%). DFX was temporarily skipped for adverse events in seven patients (7.0%) and was permanently discontinued in 11 patients (11.0%). CONCLUSION: DFX reduced serum ferritin and LPI levels in patients with transfusional iron overload. Despite the relatively high percentage of gastrointestinal side effects, DFX was tolerable in all subgroups.

Fluorescent composite hydrogels of metal-organic frameworks and functionalized graphene oxide.

GO MOFs! Azobenzoic acid functionalized graphene (A-GO) can act as a structure-directing template that influences hydrogel formation together with metal-organic frameworks (MOFs). Zn(2+) MOFs of pyridine derivatives work as framework linkers between the A-GO sheets (MOF-A-GO, see figure). MOF-A-GO exhibits a strong fluorescence enhancement upon gel formation. In addition, MOF-A-GO selectively recognizes trinitrotoluene.

Enzyme precipitate coatings of glucose oxidase onto carbon paper for biofuel cell applications.

Enzymatic biofuel cells (BFC) have a great potential as a small power source, but their practical applications are being hampered by short lifetime and low power density. This study describes the direct immobilization of glucose oxidase (GOx) onto the carbon paper in the form of highly stable and active enzyme precipitation coatings (EPCs), which can improve the lifetime and power density of BFCs. EPCs were fabricated directly onto the carbon paper via a three-step process: covalent attachment (CA), enzyme precipitation, and chemical crosslinking. GOx-immobilized carbon papers via the CA and EPC approaches were used as an enzyme anode and their electrochemical activities were tested under the BFC-operating mode. The BFCs with CA and EPC enzyme anodes produced the maximum power densities of 50 and 250 µW/cm(2) , respectively. The BFC with the EPC enzyme anode showed a stable current density output of >700 µA/cm(2) at 0.18 V under continuous operation for over 45 h. When a maple syrup was used as a fuel under ambient conditions, it also produced a stable current density of >10 µA/cm(2) at 0.18 V for over 25 h. It is anticipated that the direct immobilization of EPC on hierarchical-structured electrodes with a large surface area would further improve the power density of BFCs that can make their applications more feasible.

Evolutionary screening of collagen-like peptides that nucleate hydroxyapatite crystals.

The biogenesis of inorganic/organic composite materials such as bone typically involves the process of templated mineralization. Biomimetic synthesis of bone-like materials therefore requires the development of organic scaffolds that mediate mineralization of hydroxyapatite (HAP), the major inorganic component of bone. Using phage display, we identified a 12-residue peptide that bound to single-crystal HAP and templated the nucleation and growth of crystalline HAP mineral in a sequence- and composition-dependent manner. The sequence responsible for the mineralizing activity resembled the tripeptide repeat (Gly-Pro-Hyp) of type I collagen, a major component of bone extracellular matrix. Using a panel of synthetic peptides, we defined the structural features required for mineralizing activity. The results support a model for the cooperative noncovalent interaction of the peptide with HAP and suggest that native collagen may have a mineral-templating function in vivo. We expect this short HAP-binding peptide to be useful in the synthesis of three-dimensional bone-like materials.

Microscopic study of hydroxyapatite dissolution as affected by fluoride ions.

Fluoride ions play a critical role in preventing tooth decay. We investigated the microscopic effects of fluoride ions on hydroxyapatite (100) surface dissolution using in situ atomic force microscopy. In the presence of 10 mM NaF, individual surface step retraction velocities decreased by about a factor of 5 as compared to NaF-free conditions. Importantly, elongated hexagonal etch pits, which are characteristic of (100) surface dissolution, were no longer observed when NaF was present. The alteration of pit shape is more distinct at a higher NaF concentration (50 mM) where triangular etch pits evolved during dissolution. Furthermore, in a fluoride concentration typical for tap water (10 µM), we observed roughening of individual step lines, resulting in the formation of scalloped morphologies. Morphological changes to individual steps across a wide range of fluoride concentrations suggest that the cariostatic capabilities of fluoride ions originate from their strong interactions with molecular steps.

Steric blocking as a tool to control molecular film geometry at a metal surface.

The application of steric blocking in surface science is exemplified by the control of surface patterns through the selective methylation of pentacenetetrone. Pentacenetetrones interact (with one another) on Cu(111) via intermolecular hydrogen bonding involving the carbonyl oxygen and the adjacent hydrogen atoms. Steric blocking of the intermolecular interaction by the successive insertion of inert methyl groups at terminal locations transforms a dense molecular pattern first into isolated double rows and eventually into single rows in a highly predictable fashion. Density functional theory modeling reveals the underlying energetics.

Method development and mechanistic study on direct pulsed laser irradiation process for highly effective dechlorination of persistent organic pollutants.

Chlorine-based compounds are typical persistent organic pollutants (POPs) that are widely generated in industrial production. This paper reports an effective and rapid pulsed laser irradiation technique for the dechlorination of hexachlorobenzene (HCB), a model pollutant, without additional catalysts or supports. The effects of the laser parameters, including the laser wavelength and power, on the dechlorination efficiency, were also investigated. The optimized results showed that a lower laser wavelength of 266 nm with 10 mJ/pulse power exhibited the highest dechlorination efficiency with 95% within 15 min. In addition, the laser beam effect was examined by designing the direct-pulsed laser single and multipath irradiation system. The results showed that improving the laser beam profile resulted in more than 95% dechlorination efficiency within 5 min. Thus, the dechlorination reaction proceeded much faster as the surface area that the laser beam came in contact with increased due to the multipath system than the single pathway. Gas chromatography identified benzene as the final product of HCB with pentachlorobenzene (PCB), tetrachlorobenzene (TeCB), trichlorobenzene (TCB), dichlorobenzene (DCB), and chlorobenzene (CB) as intermediate products. The mechanism of HCB dechlorination was explained by a comparison of theoretical calculations with the experimental results. The present study reports an advanced technique for the complete dechlorination of chlorobenzenes, which holds great application potential in environmental remediation.

Concurrent occurrence of electrochemical dissolution/deposition of cobalt-calcium phosphate composite.

Amorphous cobalt-calcium phosphate composite (CCPC) films are electrochemically prepared on various electrodes by utilizing the solid phase of hydroxyapatite as a phosphate source. The CCPC film formation is surface process in which the dissolution of hydroxyapatite and the deposition of CCPC film concurrently occur on the electrode surface without the mass transfer of phosphate ions into the bulk solution. Elemental, crystallographic, and morphological analyses (EDX, ICP-AES, XPS, and XRD) indicate that the CCPC is composed of amorphous cobalt oxide with calcium and phosphate. The film exhibits durable oxygen evolution reaction (OER) catalytic properties under neutral and basic aqueous condition. Compared to using solution phase of phosphate source, our preparation method utilizing solid hydroxyapatite has advantage of preventing unnecessary chemical reaction between phosphate and other chemical species in bulk solution.

Tunability in polyatomic molecule diffusion through tunneling versus pacing.

The diffusion temperature of molecular 'walkers', molecules that are capable of moving unidirectionally across a substrate violating its symmetry, can be tuned over a wide range utilizing extension of their aromatic backbone, insertion of a second set of substrate linkers (converting bipedal into quadrupedal species), and substitution on the ring. Density functional theory simulation of the molecular dynamics identifies the motion of the quadrupedal species as pacing (as opposed to trotting or gliding). Knowledge about the diffusion mode allows us to draw conclusions on the relevance of tunneling to the surface diffusion of polyatomic organic molecules.

A Chronocoulometric Method to Measure the Corrosion Rate on Zinc Metal Electrodes.

Research studies on zinc metal-based batteries have attracted considerable attention as a candidate for post-lithium-ion batteries. Zinc is one of the few metal anodes that is compatible with aqueous and non-aqueous electrolytes, providing a large theoretical capacity of 820 mAh g-1. However, in aqueous electrolytes, the zinc metal anode suffers from hydrogen evolution reaction (HER), by which zinc is irreversibly consumed or corroded continually. Exact estimation of the corrosion rate has been a challenge in the development of Zn-based batteries. Measurement of the corrosion rate by conventional Tafel analysis meets serious problems because the cathodic current reflects deposition of Zn metal as well as HER, inhibiting exact measurement of the corrosion rate. Herein, we developed a chronocoulometric "deposition-rest-dissolution" method to quantify the corrosion rate without such interference from the deposition of Zn. The method was successfully applied to the quantification of the rate of chemical corrosion of Zn in aqueous electrolytes with various pH and concentration values. The "deposition-rest-dissolution" method and electrochemical impedance spectroscopy confirmed that saturated ZnSO4 (ca. 3.2 M) + 0.075 M Li2SO4 delivers the lowest corrosion rate compared to the other electrolytes, probably because the activity of water in such a concentrated electrolyte is low enough to suppress the kinetics of HER. Moreover, this method can be generally applied to determine the rate of chemical corrosion on various metal electrodes.

Cost-Effective Synthesis of Efficient CoWO4/Ni Nanocomposite Electrode Material for Supercapacitor Applications.

In the present study, the synthesis of CoWO4 (CWO)-Ni nanocomposites was conducted using a wet chemical method. The crystalline phases and morphologies of the Ni nanoparticles, CWO, and CWO-Ni composites were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDAX). The electrochemical properties of CWO and CWO-Ni composite electrode materials were assessed by cyclic voltammetry (CV), and galvanostatic charge-discharge (GCD) tests using KOH as a supporting electrolyte. Among the CWO-Ni composites containing different amounts of Ni1, Ni2, and Ni3, CWO-Ni3 exhibited the highest specific capacitance of 271 F g-1 at 1 A g-1, which was greater than that of bare CWO (128 F g-1). Moreover, the CWO-Ni3 composite electrode material displayed excellent reversible cyclic stability and maintained 86.4% of its initial capacitance after 1500 discharge cycles. The results obtained herein demonstrate that the prepared CWO-Ni3 nanocomposite is a promising electrode candidate for supercapacitor applications.

H-atom position as pattern-determining factor in arenethiol films.

The evolution of a low coverage of benzenethiol molecules on Cu(111) during annealing shows the prevalence of S...H hydrogen bonds involving hydrogen atoms in the ortho position. The row and pattern formation of (methylated) anthracenethiols indicates intermolecular interactions in which hydrogen atoms at the terminal position of the aromatic moiety dominate. In combination, this leads to the notion that pattern formation in classes of arenethiol molecules is each governed by optimization of the intermolecular interactions of the hydrogen atom at one particular position on the arene. This may provide a general guiding principle for the design of arenethiol films.

Surface diffusive motion in a periodic and asymmetric potential.

9,10-Dithioanthracene adsorbed on Cu(111) diffuses exclusively along the high-symmetry axis of the molecule-substrate system. Further reduction of the symmetry of the system by asymmetric methylation does not reduce the symmetry of the motion although it has a substantial effect on the diffusion rate (100-fold reduction) and renders the diffusion barrier asymmetric. This is in contrast to the behavior expected of a classical particle, and it provides a direct single-molecule-scale vista on the validity of The Principle of Microscopic Reversibility first formulated by Tolman in 1924, which despite its fundamental role has attracted little visualization.

A phase II study of biweekly irinotecan and cisplatin for patients with extensive stage disease small cell lung cancer.

BACKGROUND: An irinotecan and cisplatin (IP) combination is one of active regimen used in treatment of extensive stage disease (ED) small cell lung cancer (SCLC). However, a 4-week cycle of irinotecan treatment can result in significant myelosuppression and diarrhea. Therefore, the present study was conducted to evaluate the efficacy and safety of biweekly IP in patients with ED SCLC. METHODS: Patients with previously untreated ED SCLC received intravenous irinotecan at a dose of 60mg/m(2) and cisplatin at a dose of 30mg/m(2) on days 1 and 15 every 4 weeks. RESULTS: Thirty-five patients were enrolled in this study. Three complete responses and 23 partial responses were confirmed, giving an overall response rate of 74.3%. After a median follow-up of 15.1 months, the median time to progression and overall survival were 7.7 months and 12.2 months, respectively. Grade 3/4 neutropenia occurred in seven patients and grade 3 febrile neutropenia was observed in one patient. Grade 3 diarrhea occurred in two patients. CONCLUSIONS: The combination chemotherapy of biweekly IP was found to be well tolerated and effective in patients with ED SCLC. Further evaluation of the combination of IP at the dose and schedule in this study is warranted in ED SCLC patients.

Multicenter phase II study of weekly paclitaxel plus cisplatin combination chemotherapy in patients with advanced gastric cancer.

PURPOSE: Since a weekly administration of paclitaxel has demonstrated a sustained efficacy and more favorable toxicity profile than a 3-weekly administration for various solid tumors, the present study was conducted to evaluate the efficacy and safety of a combination regimen of weekly paclitaxel plus cisplatin in patients with advanced gastric cancer. PATIENTS AND METHODS: Patients with previously untreated metastatic or recurrent, measurable gastric cancer received intravenous paclitaxel 100 mg/m(2) plus cisplatin 35 mg/m(2) on days 1 and 8 based on a 3-week cycle. RESULTS: Fifty-two patients were enrolled in the current study. Two complete responses and 17 partial responses were confirmed, giving an overall response rate of 36.5%. At a median follow-up of 8.5 months, the median time to progression and median overall survival was 6.0 and 10.8 months, respectively. Grade 3 neutropenia occurred in ten patients, while no grade 4 neutropenia or febrile neutropenia was observed. The most common non-hematologic toxicity was nausea (grade 1/2, 56.9%). There were no treatment-related deaths. CONCLUSION: A weekly paclitaxel and cisplatin combination was found to be well-tolerated and effective in patients with advanced gastric cancer. Accordingly, this regimen can be regarded as an important first-line treatment option for advanced gastric cancer.

Outcome of repeated radiosurgery for recurrent metastatic brain tumors.

OBJECTIVE: We investigated the outcome of repeated gamma knife radiosurgery (GKS) for local or remote recurrence after initial radiosurgery. MATERIAL AND METHODS: We retrospectively reviewed 204 patients who were treated with GKS. Among them 43 patients (21%) underwent GKS more than once. The second GKS was given for recurrence at the previously treated sites in 16 patients, new lesions at remote sites in 13, and both local recurrence and new lesions in 14. RESULTS: The median survival from the first GKS was 36 (7-190) weeks in all patients and 68 (16-156) weeks in 43 patients with repeated GKS. The median time from the first GKS to the second was 37 weeks. The median survival from the second radiosurgical intervention was 32 (7-132) weeks. Local control rate at 6 months after salvage GKS was 90.7%. RPA class was the commonly dominant prognostic factor in both initial and salvage GKS. CONCLUSION: Recurrence is common for patients with metastatic brain tumors after initial radiosurgery. Local control and survival time after salvage treatment are comparable with those after initial radiosurgery. GKS as a salvage treatment may provide additional survival benefit in selected patients.

Fabrication of enzyme-based coatings on intact multi-walled carbon nanotubes as highly effective electrodes in biofuel cells.

CNTs need to be dispersed in aqueous solution for their successful use, and most methods to disperse CNTs rely on tedious and time-consuming acid-based oxidation. Here, we report the simple dispersion of intact multi-walled carbon nanotubes (CNTs) by adding them directly into an aqueous solution of glucose oxidase (GOx), resulting in simultaneous CNT dispersion and facile enzyme immobilization through sequential enzyme adsorption, precipitation, and crosslinking (EAPC). The EAPC achieved high enzyme loading and stability because of crosslinked enzyme coatings on intact CNTs, while obviating the chemical pretreatment that can seriously damage the electron conductivity of CNTs. EAPC-driven GOx activity was 4.5- and 11-times higher than those of covalently-attached GOx (CA) on acid-treated CNTs and simply-adsorbed GOx (ADS) on intact CNTs, respectively. EAPC showed no decrease of GOx activity for 270 days. EAPC was employed to prepare the enzyme anodes for biofuel cells, and the EAPC anode produced 7.5-times higher power output than the CA anode. Even with a higher amount of bound non-conductive enzymes, the EAPC anode showed 1.7-fold higher electron transfer rate than the CA anode. The EAPC on intact CNTs can improve enzyme loading and stability with key routes of improved electron transfer in various biosensing and bioelectronics devices.

Ultraviolet Patterned Calixarene-Derived Supramolecular Gels and Films with Spatially Resolved Mechanical and Fluorescent Properties.

Supramolecular assemblies have in the past been considered mechanically weak and in most cases unable to withstand their own weight. Calixarene-derived networks can, however, provide robust supramolecular gels. Incorporating a photoreactive stilbene moiety, we show that the aggregation state of the material can be tuned by heating and UV exposure in order to control the mechanical as well as the fluorescent properties. Regulating the extent of heating to control the proportion of H-aggregates and J-aggregates and further cross-linking of H-aggregates by control over UV exposure allows for adjustable photopatterning of the fluorescence as well as the material stiffness in the range from ∼100 to 450 kPa. We expect this straightforward supramolecular system will be suitable for advanced prototyping in applications where modulus and shape are important design criteria.