A comprehensive comparison of dye-sensitized NiO photocathodes for solar energy conversion.

We investigated a range of different mesoporous NiO electrodes prepared by different research groups and private firms in Europe to determine the parameters which influence good quality photoelectrochemical devices. This benchmarking study aims to solve some of the discrepancies in the literature regarding the performance of p-DSCs due to differences in the quality of the device fabrication. The information obtained will lay the foundation for future photocatalytic systems based on sensitized NiO so that new dyes and catalysts can be tested with a standardized material. The textural and electrochemical properties of the semiconducting material are key to the performance of photocathodes. We found that both commercial and non-commercial NiO gave promising solar cell and water-splitting devices. The NiO samples which had the two highest solar cell efficiency (0.145% and 0.089%) also gave the best overall theoretical H2 conversion.

Dynamics of Gold Nanoparticles on Carbon Nanostructures Driven by van der Waals and Electrostatic Interactions.

Transmission electron microscopy studies on the assembly and growth of gold nanoparticles on carbon nanotubes supported on few-layer graphene and amorphous carbon reveal a competition between van der Waals forces and electrostatic interactions, enabling controlled positioning and sizing of adsorbed nanoparticles at the nanochannels formed between the carbon nanotube and the few-layer graph-ene surface.

Interactions of gold nanoparticles with the interior of hollow graphitized carbon nanofibers.

Interactions of free-standing gold nanoparticles and hollow graphitized nanofibers in colloidal suspension are investigated, revealing the first example of the controlled arrangement of nanoparticles inside nano-containers, as directed by their internal structure. The ordering is highly effective for small gold nanoparticles whose sizes are commensurate with the height of graphitic step-edges in the graphitized carbon nanofibers and is less effective for larger gold nanoparticles. Studies aimed at understanding the role of the organic-solvent surface tension, employed for the filling experiments, demonstrate that gold nanoparticles become preferentially anchored into the hollow graphitized carbon nanofibers under a mixture of pentane/CO(2) in supercritical conditions. It is shown that a three-step cleaning procedure enables effective removal of gold nanoparticles adsorbed on the exterior surface of graphitized carbon nanofibers, while ordered arrays of encapsulated nanoparticles are retained.

Controlling the regioselectivity of the hydrosilylation reaction in carbon nanoreactors.

Hollow graphitized carbon nanofibres (GNF) are employed as nanoscale reaction vessels for the hydrosilylation of alkynes. The effects of confinement in GNF on the regioselectivity of addition to triple carbon-carbon bonds are explored. A systematic comparison of the catalytic activities of Rh and RhPt nanoparticles embedded in a nanoreactor with free-standing and surface-adsorbed nanoparticles reveals key mechanisms governing the regioselectivity. Directions of reactions inside GNF are largely controlled by the non-covalent interactions between reactant molecules and the nanofibre channel. The specific π-π interactions increase the local concentration of the aromatic reactant and thus promote the formation of the E isomer of the ß-addition product. In contrast, the presence of aromatic groups on both reactants (silane and alkyne) reverses the effect of confinement and favours the formation of the Z isomer due to enhanced interactions between aromatic groups in the cis-orientation with the internal graphitic step-edges of GNF. The importance of π-π interactions is confirmed by studying transformations of aliphatic reactants that show no measurable changes in regioselectivity upon confinement in carbon nanoreactors.

Biotechnological promises of Fe-filled CNTs for cell shepherding and magnetic fluid hyperthermia applications.

Fe-filled carbon nanotubes (Fe@CNTs) recently emerged as an effective class of hybrid nanoparticles for biotechnological applications, such as magnetic cell sorting and magnetic fluid hyperthermia. Aiming at studying the effects of both the Fe loading and the magnetocrystalline characteristics in these applications, we describe herein the preparation of Fe@CNTs containing different Fe phases that, upon functionalization with the antibody Cetuximab (Ctxb), allow the targeting of cancer cells. Our experimental findings reveal that an optimal Ctxb/Fe weight ratio of 1.2 is needed for efficient magnetic cell shepherding, whereas enhanced MFH-induced mortality (70 vs. 15%) can be reached with hybrids enriched in the coercive Fe(3)C phase. These results suggest that a synergistic effect between the Ab loading and the Fe distribution in each nanotube exists, for which the maximum shepherding and hyperthermia effects are observed when higher densities of Fe@CNTs featuring the more coercive phase are interfaced with the cells.

Assembly, growth, and catalytic activity of gold nanoparticles in hollow carbon nanofibers.

Graphitized carbon nanofibers (GNFs) act as efficient templates for the growth of gold nanoparticles (AuNPs) adsorbed on the interior (and exterior) of the tubular nanostructures. Encapsulated AuNPs are stabilized by interactions with the step-edges of the individual graphitic nanocones, of which GNFs are composed, and their size is limited to approximately 6 nm, while AuNPs adsorbed on the atomically flat graphitic surfaces of the GNF exterior continue their growth to 13 nm and beyond under the same heat treatment conditions. The corrugated structure of the GNF interior imposes a significant barrier for the migration of AuNPs, so that their growth mechanism is restricted to Ostwald ripening. Conversely, nanoparticles adsorbed on smooth GNF exterior surfaces are more likely to migrate and coalesce into larger nanoparticles, as revealed by in situ transmission electron microscopy imaging. The presence of alkyl thiol surfactant within the GNF channels changes the dynamics of the AuNP transformations, as surfactant molecules adsorbed on the surface of the AuNPs diminished the stabilization effect of the step-edges, thus allowing nanoparticles to grow until their diameters reach the internal diameter of the host nanofiber. Nanoparticles thermally evolved within the GNF channel exhibit alignment, perpendicular to the GNF axis due to interactions with the step-edges and parallel to the axis because of graphitic facets of the nanocones. Despite their small size, AuNPs in GNF possess high stability and remain unchanged at temperatures up to 300 °C in ambient atmosphere. Nanoparticles immobilized at the step-edges within GNF are shown to act as effective catalysts promoting the transformation of dimethylphenylsilane to bis(dimethylphenyl)disiloxane with a greater than 10-fold enhancement of selectivity as compared to free-standing or surface-adsorbed nanoparticles.

Encapsulation of single-molecule magnets in carbon nanotubes.

Next-generation electronic, photonic or spintronic devices will be based on nanoscale functional units, such as quantum dots, isolated spin centres or single-molecule magnets. The key challenge is the coupling of the nanoscale units to the macroscopic world, which is essential for read and write purposes. Carbon nanotubes with one macroscopic and two nanoscopic dimensions provide an excellent means to achieve this coupling. Although the dimensions of nanotube internal cavities are suitable for hosting a wide range of different molecules, to our knowledge, no examples of molecular magnets inserted in nanotubes have been reported to date. Here we report the successful encapsulation of single-molecule magnets in carbon nanotubes, yielding a new type of hybrid nanostructure that combines all the key single-molecule magnet properties of the guest molecules with the functional properties of the host nanotube. The findings may pave the way to the construction of spintronic or ultrahigh-density magnetic data storage devices.

Transport and encapsulation of gold nanoparticles in carbon nanotubes.

Nanoparticles confined in small volumes exhibit functional properties different from that of the bulk material. Furthermore, the smaller the volume available then the greater the effects of confinement are observed to be. Metallic nanoparticles encapsulated within carbon nanotubes have been proposed for many applications ranging from catalysis to quantum storage devices. In this study we examine encapsulation of discrete gold nanoparticles (AuNP) within multi-wall carbon nanotubes (MWNT), with internal diameter less than 10 nm. During the encapsulation process AuNP undergo Ostwald ripening allowing them to reach a diameter that precisely matches the internal diameter of MWNT (snug fit). The use of supercritical CO2 as a processing medium enables efficient transport and irreversible encapsulation of AuNP into narrow nanotubes. Once inside MWNT, the nanoparticles are unable to grow further and retain their spheroidal shape. This dynamic behaviour observed for AuNP differs significantly from the behaviour of molecular guest-species under similar conditions.