Influence of distortions of recorded diffraction patterns on strain analysis by nano-beam electron diffraction.

Images acquired in transmission electron microscopes can be distorted for various reasons such as e.g. aberrations of the lenses of the imaging system or inaccuracies of the image recording system. This results in inaccuracies of measures obtained from the distorted images. Here we report on measurement and correction of elliptical distortions of diffraction patterns. The effect of this correction on the measurement of crystal lattice strain is investigated. We show that the effect of the distortions is smaller than the precision of the measurement in cases where the strain is obtained from shifts of diffracted discs with respect to their positions in images acquired in an unstrained reference area of the sample. This can be explained by the fact that diffraction patterns acquired in the strain free reference area of the sample are distorted in the same manner as the diffraction patterns acquired in the strained region of interest. In contrast, for samples without a strain free reference region such as nanoparticles or nanoporous structures, where we evaluate ratios of lattice plane distances along different directions, the distortions are usually not negligible. Furthermore, two techniques for the detection of diffraction disc positions are compared showing that for samples in which the crystal orientation changes over the investigated area it is more precise to detect the positions of many diffraction discs simultaneously instead of detecting each disc position independently.

Independent control over residual silver content of nanoporous gold by galvanodynamically controlled dealloying.

A new procedure was developed and characterized for the galvanodynamically controlled dealloying (GCD) of AuxAg100-x alloys to obtain nanoporous gold (npAu) mainly as an unsupported catalyst material for partial oxidation of alcohols. Such catalysts require residual Ag content of less than 1 at%. GCD was compared to the preparation of npAu by potentiostatically controlled deallyoing (PCD) and free corrosion (FC). The main advantage of GCD is the ability to obtain npAu with a predetermined residual Ag content including residual Ag contents below 1 at% while retarding the coarsening of the ligaments. For PCD and FC, there is a strong increase of ligament size with decreasing residual Ag content because the longer times required for dealloying unavoidably lead to coarsening of the npAu structure. On the other hand, GCD also prevented too high initial current density that leads to cracking of the samples and prevents formation of mechanically stable monoliths. GCD tolerates different compositions of the starting alloy for AuxAg100-x within the tested composition range (20 at% ≤ xAu ≤ 30 at%). The samples obtained by GCD were tested for methanol and ethanol oxidation and showed favorable characteristics for partial oxidation of methanol to methyl formate and of ethanol to ethyl acetate.