Stabilization of mercury using waste ladle furnace slag.

Disposal of mercury waste has always provided unique challenges due to its high degree of complexity and volatility. This study evaluated the feasibility of using waste LF slag to form a cementitious matrix capable of providing an effective stabilization/solidification solution for the treatment of mercury wastes. The new matrix was synthesized and simulated through a combination of alkali activation and autoclaving process and doped with mercury nitrate at increasing dosage while monitoring the final form of the mercury and its effects on the mineral stability and structure of the new matrix. Compressive strength of up to 20 N/mm2 was achievable for the original matrix. Promising results were obtained in terms of reduced leachability of the mercury when compared to ordinary Portland cement systems at low doping concentration of around 0.5% by weight. A series of precipitation reactions was found to be the main cause responsible for this successful stabilization, especially the metal sulfide precipitation that occurred with the sulfur present in the original waste LF slag.

Detection and quantitation of non-steroidal anti-inflammatory drug use close to the time of birth using umbilical cord tissue.

BACKGROUND: Nonsteroidal anti-inflammatory drugs are contraindicated in the third trimester of pregnancy due to negative effects including alteration of uteroplacental blood flow, premature ductus arteriosus closure, and adverse effects on the fetal kidney. However, many women are unaware of these risks, and commonly report their use in pregnancy. We aimed to determine if umbilical cord was a reliable matrix for detecting NSAID use, determine incidence of use close to labour, and uncover associations with obstetric/neonatal outcomes. METHODS: We developed a UHPLC-MS/MS method to simultaneously detect diclofenac, ibuprofen, indomethacin, naproxen, and salicylic acid in plasma and umbilical cord lysate. Using this method, we screened 380 lysates to determine the prevalence of NSAID use. Results were compared to the clinical outcomes in pregnancy using ICD9/10 chart codes (n = 21). RESULTS: The UHPLC-MS/MS method has excellent linearity, accuracy, and precision in solvent and plasma, but lower sensitivity in umbilical cord lysate. We report a 3 % rate of NSAID ingestion within days of labour - the pharmacokinetically-determined window for active ingestion. There were no significant differences observed for maternal, obstetric, or neonatal outcomes between the NSAID positive group (n = 11) and NSAID negative group (n = 369). CONCLUSIONS: Because NSAID use in third trimester is contraindicated, even a 3% usage rate is alarmingly high. Based on UHPLC-MS/MS performance of umbilical cord lysate, 3% is likely a conservative estimate. Recent adoption of NSAIDs under clinical supervision to support in vitro fertilisation and prevent pre-eclampsia indicates future work should focus on determining safe dosages of NSAIDs and the correct therapeutic window in pregnancy.

Umbilical cord as an analytical matrix - A technical note.

The umbilical cord (UC) connects the fetal blood supply to the placenta, so is exposed to all systemic endo- and xenobiotics. We have extensive experience using UC as an analytical matrix for detecting and/or quantitating drugs, chemicals and endogenous compounds. This technical note describes advantages (large amount available, ease of collection, small sample needed for use, rapid availability) and challenges (clinical relationships, processing difficulties, matrix effects on analytes and detection technologies) of UC as an analytical matrix in ELISA and LC/MS platforms, and provides guidance for successfully working with this tissue.

Value-added utilisation of recycled concrete in hot-mix asphalt.

The feasibility of partial substitution of granite aggregate in hot-mix asphalt (HMA) with waste concrete aggregate was investigated. Three hybrid HMA mixes incorporating substitutions of granite fillers/fines with 6%, 45% untreated, and 45% heat-treated concrete were evaluated by the Marshall mix design method; the optimum binder contents were found to be 5.3%, 6.5% and 7.0% of grade Pen 60/70 bitumen, respectively. All three hybrid mixes satisfied the Marshall criteria of the Singapore Land Transport Authority (LTA) W3B wearing course specification. The hybrid mix with 6% concrete fillers gave comparable resilient modulus and creep resistance as the conventional W3B mix, while hybrid mixes with higher concrete substitutions achieved better performance. X-ray diffraction (XRD) showed the distinct presence of free lime in the heat-treated concrete, while the scanning electron microscope (SEM) provided an in-depth perspective of the concrete grains in the HMA matrix. The results suggest feasible use of waste concrete as partial aggregate substitution in HMA.