Leukocyte-mimicking stem cell delivery via in situ coating of cells with a bioactive hyperbranched polyglycerol.

Since stem cells emerged as a new generation of medicine, there are increasing efforts to deliver stem cells to a target tissue via intravascular injection. However, the therapeutic stem cells lack the capacity to detect and adhere to the target tissue. Therefore, this study presents synthesis of a bioactive hyperbranched polyglycerol (HPG) that can noninvasively associate with stem cells and further guide them to target sites, such as inflamed endothelium. The overall process is analogous to the way in which leukocytes are mobilized to the injured endothelium.

Tailoring the dependency between rigidity and water uptake of a microfabricated hydrogel with the conformational rigidity of a polymer cross-linker.

Many diverse applications utilize hydrogels as carriers, sensors, and actuators, and these applications rely on the refined control of physical properties of the hydrogel, such as elastic modulus and degree of swelling. Often, hydrogel properties are interdependent; for example, when elastic modulus is increased, degree of swelling is decreased. Controlling these inverse dependencies remains a major barrier for broader hydrogel applications. We hypothesized that polymer cross-linkers with varied chain flexibility would allow us to tune the inverse dependency between the elastic modulus and the degree of swelling of the hydrogels. We examined this hypothesis by using alginate and poly(acrylic acid) (PAA) modified with a controlled number of methacrylic groups as model inflexible and flexible cross-linkers, respectively. Interestingly, the polyacrylamide hydrogel cross-linked by the inflexible alginate methacrylates exhibited less dependency between the degree of swelling and the elastic modulus than the hydrogel cross-linked by flexible PAA methacrylates. This critical role of the cross-linker's inflexibility was related to the difference of the degree of hydrophobic association between polymer cross-linkers, as confirmed with pyrene probes added in pregel solutions. Furthermore, hydrogels cross-linked with alginate methacrylates could tune the projection area of adhered cells by solely altering elastic moduli. In contrast, gels cross-linked with PAA methacrylates failed to modulate the cellular adhesion morphology due to a lower, and smaller, elastic modulus range to be controlled. Overall, the results of this study will significantly advance the controllability of hydrogel properties and greatly enhance the performance of hydrogels in various biological applications.

Ellipsoidal Polyaspartamide Polymersomes with Enhanced Cell-Targeting Ability.

Nano-sized polymersomes functionalized with peptides or proteins are being increasingly studied for targeted delivery of diagnostic and therapeutic molecules. Earlier computational studies have suggested that ellipsoidal nanoparticles, compared to spherical ones, display enhanced binding efficiency with target cells, but this has not yet been experimentally validated. We hypothesize that hydrophilic polymer chains coupled to vesicle-forming polymers would result in ellipsoidal polymersomes. In addition, ellipsoidal polymersomes modified with cell adhesion peptides bind with target cells more actively than spherical ones. We examine this hypothesis by substituting polyaspartamide with octadecyl chains and varying numbers of poly(ethylene glycol) (PEG) chains. Increasing the degree of substitution of PEG from 0.5 to 1.0 mol% drives the polymer to self-assemble into an ellipsoidal polymersome with an aspect ratio of 2.1. Further modification of these ellipsoidal polymersomes with peptides containing an Arg-Gly-Asp sequence (RGD peptides) lead to a significant increase in the rate of association and decrease in the rate of dissociation with a substrate coated with αvß3 integrins. In addition, in a circulation-mimicking flow, the ellipsoidal polymersomes linked with RGD peptides adhere to target tissues more favorably than their spherical equivalents do. Overall, the results of this study will greatly serve to improve the efficiency of targeted delivery of a wide array of polymersomes loaded with various biomedical modalities.

Characteristics of water-soluble ionic species in fine (PM2.5) and coarse particulate matter (PM10-2.5) in Kaohsiung, southern Taiwan.

Eleven ionic species and fine and coarse particle mass concentrations of fine (PM2.5) and coarse (PM10-2.5) particulate matter were investigated in Kaohsiung, southern Taiwan. The PM2.5 and PM10-2.5 particulate concentrations were 49-64 and 34-37 microg x m(-3), respectively. Fifty-five to 64% of the particulate matter less than 10 microm in aerodynamic diameter (PM10) mass was attributed to the PM2.5. PM2.5 concentrations at Daliao (a rural and industrial complex area) were higher than at Tzuoying (an urban and industrial complex area). Ionic species contributed 45-53% and 42-45% of PM2.5 and PM10, respectively. Potassium ions (K+), sulfate (SO4(2-)), and ammonium (NH4+) were predominant in PM2.5, whereas sodium, calcium, and magnesium ions were foremost in PM10-2.5. Nitrate (NO3-) existed in both the PM2.5 and PM10-2.5. Chloride (Cl-), NO3-, and NH4+ concentrations were higher at night than during the day, and they were easily transferred into the gas phase by photochemical reactions and temperature-induced volatilization. The NH4+/SO4(2-) ratios were 2.6 and 2.5 at Daliao and Tzuoying, respectively, which indicated that both sampling sites were rich in NH4+. Therefore, ammonium nitrate would be present in the area.

Pyrolysis characteristics of integrated circuit boards at various particle sizes and temperatures.

A pyrolysis method was employed to recycle the metals and brominated compounds blended into printed circuit boards. This research investigated the effect of particle size and process temperature on the element composition of IC boards and pyrolytic residues, liquid products, and water-soluble ionic species in the exhaust, with the overall goal being to identify the pyrolysis conditions that will have the least impact on the environment. Integrated circuit (IC) boards were crushed into 5-40 mesh (0.71-4.4mm), and the crushed particles were pyrolyzed at temperatures ranging from 200 to 500 degrees C. The thermal decomposition kinetics were measured by a thermogravimetric (TG) analyzer. The composition of pyrolytic residues was analyzed by Energy Dispersive X-ray Spectrometer (EDS), Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). In addition, the element compositions of liquid products were analyzed by ICP-AES and ICP-MS. Pyrolytic exhaust was collected by a water-absorption system in an ice-bath cooler, and IC analysis showed that the absorbed solution comprised 11 ionic species. Based on the pyrolytic kinetic parameters of TG analysis and pyrolytic residues at various temperatures for 30 min, the effect of particle size was insignificant in this study, and temperature was the key factor for the IC board pyrolysis. Two stages of decomposition were found for IC board pyrolysis under nitrogen atmosphere. The activation energy was 38-47 kcal/mol for the first-stage reaction and 5.2-9.4 kcal/mol for the second-stage reaction. Metal content was low in the liquid by-product of the IC board pyrolysis process, which is an advantage in that the liquid product could be used as a fuel. Brominate and ammonium were the main water-soluble ionic species of the pyrolytic exhaust. A plan for their safe and effective disposal must be developed if the pyrolytic recycling process is to be applied to IC boards.

Worm-Like Superparamagnetic Nanoparticle Clusters for Enhanced Adhesion and Magnetic Resonance Relaxivity.

Nanosized bioprobes that can highlight diseased tissue can be powerful diagnostic tools. However, a major unmet need is a tool with adequate adhesive properties and contrast-to-dose ratio. To this end, this study demonstrates that targeted superparamagnetic nanoprobes engineered to present a worm-like shape and hydrophilic packaging enhance both adhesion efficiency to target substrates and magnetic resonance (MR) sensitivity. These nanoprobes were prepared by the controlled self-assembly of superparamagnetic iron oxide nanoparticles (SPIONs) into worm-like superstructures using glycogen-like amphiphilic hyperbranched polyglycerols functionalized with peptides capable of binding to defective vasculature. The resulting worm-like SPION clusters presented binding affinity to the target substrate 10-fold higher than that of spherical ones and T2 molar MR relaxivity 3.5-fold higher than that of conventional, single SPIONs. The design principles discovered for these nanoprobes should be applicable to a range of other diseases where improved diagnostics are needed.

Enzyme-Induced Matrix Softening Regulates Hepatocarcinoma Cancer Cell Phenotypes.

The progression of cancer is often accompanied by changes in the mechanical properties of an extracellular matrix. However, limited efforts have been made to reproduce these biological events in vitro. To this end, this study demonstrates that matrix remodeling caused by matrix metalloproteinase (MMP)-1 regulates phenotypic activities and modulates radiosensitivity of cancer cells exclusively in a 3D matrix. In this study, hepatocarcinoma cells are cultured in a collagen-based gel tailored to present an elastic modulus of ≈4.0 kPa. The subsequent exposure of the gel to MMP-1 decreases the elastic modulus from 4.0 to 0.5 kPa. In response to MMP-1, liver cancer cells undergo active proliferation, downregulation of E-cadherin, and the loss of detoxification capacity. The resulting spheroids are more sensitive to radiation than the spheroids cultured in the stiffer gel not exposed to MMP-1. Overall, this study serves to better understand and control the effects of MMP-induced matrix remodeling.

Bacteria-mimicking nanoparticle surface functionalization with targeting motifs.

In recent years, surface modification of nanocarriers with targeting motifs has been explored to modulate delivery of various diagnostic, sensing and therapeutic molecular cargo to desired sites of interest in in vitro bioengineering platforms and in vivo pathologic tissue. However, most surface functionalization approaches are often plagued by complex chemical modifications and effortful purifications. To resolve such challenges, this study demonstrates a unique method to immobilize antibodies that can act as targeting motifs on the surfaces of nanocarriers, inspired by a process that bacteria use for immobilization of the host's antibodies. We hypothesized that alkylated Staphylococcus aureus protein A (SpA) would self-assemble with micelles and subsequently induce stable coupling of antibodies to the micelles. We examined this hypothesis by using poly(2-hydroxyethyl-co-octadecyl aspartamide) (PHEA-g-C18) as a model polymer to form micelles. The self-assembly between the micelles and alkylated SpA became more thermodynamically favorable by increasing the degree of substitution of octadecyl chains to PHEA-g-C18, due to a positive entropy change. Lastly, the mixing of SpA-PA-coupled micelles with antibodies resulted in the coating of micelles with antibodies, as confirmed with a fluorescence resonance energy transfer (FRET) assay. The micelles coated with antibodies to VCAM-1 or integrin αv displayed a higher binding affinity to substrates coated with VCAM-1 and integrin αvß3, respectively, than other controls, as evaluated with surface plasmon resonance (SPR) spectroscopy and a circulation-simulating flow chamber. We envisage that this bacteria-inspired protein immobilization approach will be useful to improve the quality of targeted delivery of nanoparticles, and can be extended to modify the surface of a wide array of nanocarriers.

Tailoring polymersome bilayer permeability improves enhanced permeability and retention effect for bioimaging.

Self-assembled nanoparticles conjugated with various imaging contrast agents have been used for the detection and imaging of pathologic tissues. Inadvertently, these nanoparticles undergo fast, dilution-induced disintegration in circulation and quickly lose their capability to associate with and image the site of interest. To resolve this challenge, we hypothesize that decreasing the bilayer permeability of polymersomes can stabilize their structure, extend their lifetime in circulation, and hence improve the quality of bioimaging when the polymersome is coupled with an imaging probe. This hypothesis is examined by using poly(2-hydroxyethyl-co-octadecyl aspartamide), sequentially modified with methacrylate groups, to build model polymersomes. The bilayer permeability of the polymersome is decreased by increasing the packing density of the bilayer with methacrylate groups and is further decreased by inducing chemical cross-linking reactions between the methacrylate groups. The polymersome with decreased bilayer permeability demonstrates greater particle stability in physiological media and ultimately can better highlight tumors in mice over 2 days compared to those with higher bilayer permeability after labeling with a near-infrared (NIR) fluorescent probe. We envisage that the resulting nanoparticles will not only improve diagnosis but also further image-guided therapies.

The spatiotemporal control of erosion and molecular release from micropatterned poly(ethylene glycol)-based hydrogel.

Hydrogels have been extensively studied as a carrier of various hydrophilic molecular compounds and cells for local delivery and subsequent controlled release. One of key design parameters in the hydrogel assembly is an ability to control spatiotemporal gel degradation, in order to tailor release rates of multiple drugs and also regulate phenotypic activities of co-cultured cells. To achieve this goal, this study presents a simple but innovative implantable, microfabricated hydrogel patch that undergoes micropatterned surface erosion at controlled rates and subsequently discharges two molecular compounds of interests at desired rates. This device was prepared by first fabricating a non-degradable poly(ethylene glycol) dimethacrylate (PEGDMA) hydrogel patch containing micro-pockets of controlled spacing and subsequently filling micro-pockets with a hydrogel of poly(ethylene imine) (PEI) and PEG diacrylate (PEGDA) that was tailored to degrade at controlled rates. Separate incorporation of vascular endothelial growth factor (VEGF)121 and VEGF165, known to orchestrate vascular development, into the PEI-PEGDA gel and PEGDMA hydrogel resulted in enhanced neovascularization at the implantation sites due to bimodal, sequential release of two VEGF isoforms. We believe that the hydrogel patch fabricated in this study will be highly useful to better understand a broad array of complex biological processes and also improve the efficacy of molecular cargos in varied applications.

Flow-mediated stem cell labeling with superparamagnetic iron oxide nanoparticle clusters.

This study presents a strategy to enhance the uptake of superparamagnetic iron oxide nanoparticle (SPIO) clusters by manipulating the cellular mechanical environment. Specifically, stem cells exposed to an orbital flow ingested almost a 2-fold greater amount of SPIO clusters than those cultured statically. Improvements in magnetic resonance (MR) contrast were subsequently achieved for labeled cells in collagen gels and a mouse model. Overall, this strategy will serve to improve the efficiency of cell tracking and therapies.