Exploring the Link Between Exogenous Thyroid Hormones and Dementia Symptoms: A Real-World Disproportionality Analysis of FDA Adverse Event Reporting System.

BACKGROUND: A growing body of evidence indicates a strong association between exogenous thyroid hormone (ETH) and brain health. Establishing the potential relationship between ETH therapy and dementia symptoms is crucial for patients with thyroid disorders. OBJECTIVE: In this study, we investigate the potential association between ETH therapy and dementia symptoms by exploring the Food and Drug Administration Adverse Event Reporting System (FAERS) database. METHODS: Disproportionality analysis (DPA) was conducted using postmarketing data from the FAERS repository (Q1 2004 to Q4 2023). Cases of dementia symptoms associated with ETH therapy were identified and analyzed through DPA using reporting odds ratios and information component methods. Dose and time-to-onset analyses were performed to assess the association between ETH therapy and dementia symptoms. RESULTS: A total of 9889 cases of ETH-associated symptoms were identified in the FAERS database. Dementia accounted for a consistent proportion of adverse drug reactions each year (3.4%-6.3%). The DPA indicated an association between ETH therapy and dementia symptoms, which remained significant even across sex, age, and indications. The median time-to-onset of dementia symptoms was 7.5 days, and the median treatment time was 40.5 days. No significant dose-response relationship was observed. CONCLUSION AND RELEVANCE: This study provides evidence for a link between ETH therapy and dementia. Clinicians are therefore advised to exercise vigilance, conduct comprehensive monitoring, and consider individualized dosing to mitigate potential reactions to ETH drug administration.

Accelerating the Design of High-Energy-Density Hydrocarbon Fuels by Learning from the Data.

In the ZINC20 database, with the aid of maximum substructure searches, common substructures were obtained from molecules with high-strain-energy and combustion heat values, and further provided domain knowledge on how to design high-energy-density hydrocarbon (HEDH) fuels. Notably, quadricyclane and syntin could be topologically assembled through these substructures, and the corresponding assembled schemes guided the design of 20 fuel molecules (ZD-1 to ZD-20). The fuel properties of the molecules were evaluated by using group-contribution methods and density functional theory (DFT) calculations, where ZD-6 stood out due to the high volumetric net heat of combustion, high specific impulse, low melting point, and acceptable flash point. Based on the neural network model for evaluating the synthetic complexity (SCScore), the estimated value of ZD-6 was close to that of syntin, indicating that the synthetic complexity of ZD-6 was comparable to that of syntin. This work not only provides ZD-6 as a potential HEDH fuel, but also illustrates the superiority of learning design strategies from the data in increasing the understanding of structure and performance relationships and accelerating the development of novel HEDH fuels.

Structural Rearrangement of Energetic Materials under an External Electric Field: A Case Study of Nitromethane.

As a significant stimulus, the external electric field (EEF) can change the decomposition mechanism and energy release of energetic materials (EMs). Hence, understanding the response of EMs to an EEF is greatly meaningful for their safe usage. Herein, the structural arrangement, a crucial factor in the impact sensitivity and detonation performance of EMs, under the EEF ranging from 0.0 to 0.5 V/Å was investigated via molecular dynamics simulation. Nitromethane (NM) was taken as a case study due to the simple structure. The simulation results show that there exists a critical EEF strength between 0.2 and 0.3 V/Å, which can induce the transition of NM molecules from relatively disordered distribution to solidlike ordered and compacted arrangement with a large density. In this ordered structure, NM dipoles are aligned in a head-to-tail pattern parallel to the EEF direction because of the favored dipole-dipole interactions and weak C-H···O hydrogen bonds. As the EEF strength is enhanced, the potential energy and cohesive energy density of the NM system gradually decrease and increase, respectively, indicative of high thermodynamics stability of ordered arrangement. The results reported here also shed light on the potential of the EEF to induce the nucleation and crystallization to explore new polymorphs of EMs.

Reaction Mechanism of 3,4-Dinitrofuroxan Formation from Glyoxime: Dehydrogenation and Cyclization of Oxime.

The reaction pathway of the formation of 3,4-dinitrofuroxan from glyoxime is theoretically investigated under experimental conditions with 25 % nitric acid and dinitrogentetroxide reagents to clarify the mechanism of formation of a furoxan ring by glyoxime. The geometric configurations of minima and transition-state species are optimized at the (U)B3LYP/6-311++G** level. The CCSD(T) and CASSCF(10e,8o)/CASSCF(9e,8o) single-point energy corrections at the same level are performed on top of the optimized geometries. A subsequent dynamic correlation by using NEVPT2/6-311++G**-level single-point energy calculations based on the CASSCF results is also performed to obtain accurate energy values. The formation reaction is analyzed from two processes: glyoxime nitration and 3,4-dinitroglyoxime (nitration product) oxidative cyclization. Calculation results indicate that the electrophilic substitution of nitronium ions from the protonated HNO3 and the abstraction of hydrogen ions by HNO3 molecules are requisites of glyoxime nitration. The formation of a furoxan ring from 3,4-dinitroglyoxime involves two possible mechanisms: 1) oxydehydrogenation by NO2 molecules and the subsequent torsion of NO radical groups to form a ring and 2) the alternation of dehydrogenation and cyclization. The intermediates and transition states in both routes exhibit monoradical and diradical characteristics. Singlet and triplet reactions are considered for the diradical species. Results show that the singlet reaction mechanism is more favorable for cyclization than the triplet reaction. The formation of a furoxan ring from oxime is in accordance with the stepwise intermolecular dehydrogenation and intramolecular torsion to the ring.

Interactions of carbon nanotubes with the nitromethane-water mixture governing selective adsorption of energetic molecules from aqueous solution.

The structure and dynamics of the nitromethane-water (NM-WT) binary mixture surrounding single walled carbon nanotubes (SWNTs) have been investigated by molecular dynamics simulations. The simulation trajectories show that the NM molecules can be selectively adsorbed both outside the surface and inside the cavity of SWNTs mainly dominated by van der Waals attractions because SWNTs have a higher binding affinity for NM than WT. The binding energies of SWNTs with NM and WT obtained from electronic structure calculations at the M06-2X/6-31+G* level are 15.31 and 5.51 kcal mol(-1), respectively. Compared with the SWNT exterior, the selective adsorption of NM is preferentially occurred in the SWNT interior due to the hydrophobic interactions and the dipole-dipole interactions, which induces the decrease of the hydrogen-bond number of NM with WT and ordered structures of NM with preferred intermolecular orientation in the SWNT cavity. Furthermore, the selective adsorption dynamics of NM from the aqueous solution is regardless of the chirality and radius of SWNTs. The SWNT radius plays a negligible role in the mass density distributions of NM outside the SWNTs, while the mass density of NM in the SWNT interior decreases gradually as the SWNT radius increases. The structural arrangements and intermolecular orientations of NM in the SWNT cavity are greatly dependent on the SWNT radius due to the size effect.

Novel mechanistic study of HDAC6 regulation of rheumatoid arthritis via CMA: exploring potential therapeutic targets.

Objective: Rheumatoid arthritis (RA) is a systemic autoimmune disease. Its pathogenesis has not yet been clarified, so it is urgent to explore therapeutic targets. Here, we clarified the role of HDAC6 in the mechanism of action of RA through mediating chaperone-mediated autophagy (CMA) to provide a clinical treatment of RA. Methods: We used rheumatoid arthritis fibroblast-like synoviocytes (RA-FLS) and collagen-induced arthritis mice (CIA mice) as models of RA and pharmacological inhibitors as well as genetic interference with adeno-associated viruses to reduce the expression of HDAC6. We explored the influence of CAY10603 on RA-FLS proliferation and inflammation, as well as the expression of proteins related to the CMA signaling pathway. CIA model was constructed using DBA/1J mice. Arthritis symptoms in CIA mice were evaluated, and the expression and localization of CMA-related proteins in mouse ankle joints were examined. Results: CAY10603 inhibited proliferation as well as the level of the molecular chaperone autophagy in RA-FLS. HDAC6 shRNA significantly reduced the clinical signs of arthritis in CIA mice, as did the expression of HDAC6 in the serum and ankle synovial tissues of CIA mice. Finally, it significantly inhibited the level of Hsc70 and LAMP-2A, which are involved in the CMA signaling pathway, in ankle joint tissues. Conclusion: Downregulation of HDAC6 may inhibit CMA and thereby ameliorate RA.

A novel single domain bispecific antibody targeting VEGF and TNF-α ameliorates rheumatoid arthritis.

Anti-TNF-α therapy fails in 30% of patients, where TNF-α may not be the key causative factor in these patients. We developed a bispecific single-domain antibody block TNF-α and VEGF (V5-3).The experiments showed that V5-3 effectively activated proliferation and migration of RA-FLS and HUVEC, tube-forming role of HUVEC, and expression of inflammatory factors in vitro. Besides, the experiments indicated that the anti-RA activity of V5-3 was superior to Anbainuo in vivo. Application of V5-3 reduced the expression of inflammatory factors, extent of synovial inflammation and angiogenesis and attenuated the severity of autoimmune arthritis in collagen-induced arthritis (CIA) mice. Mechanistically, V5-3 suppressed p65, AKT and VEGFR2 phosphorylation, as well as production of TNF-α and VEGF in joint tissues. These results demonstrated that V5-3 displayed a superior effect of anti-RA, may be a new therapy to overcome the limitations of anti-TNF-α monoclonal antibody.

Novel Random Forest Ensemble Modeling Strategy Combined with Quantitative Structure-Property Relationship for Density Prediction of Energetic Materials.

With the further development of the concept of green chemistry, the new generation of energetic materials tends to exhibit detonation properties such as higher insensitivity, higher density, and higher energy. Therefore, the precise molecular design and green and efficient synthesis of energetic materials will be one of the serious challenges. For the purpose of accurate prediction of detonation performance of energetic materials, an ensemble modeling strategy based on the combination of Monte Carlo (MC) and variable importance measurement (VIM) improved random forest (RF) and quantitative structure-property relationship (QSPR) is proposed, which was successfully used for density prediction of energetic materials. First, the structure of 162 energetic compounds was optimized by Gaussian software, and the molecular descriptor data were calculated by CODESSA software based on the optimized molecular structure. Then, the MCVIMRF_Med ensemble model was constructed on the basis of the above molecular descriptor data and the corresponding energetic compound density index. The joint X-Y distance algorithm (SPXY) is used to partition the data set. And then, MC is used to further divide the calibration set data into multiple subsets for the construction of the ensemble model. The subset size and the number of iterations of the MCVIMRF_Med ensemble model were optimized through MC cross validation. The final output strategy of the ensemble model is optimized based on the optimized parameters, and an output optimization method based on median screening is proposed and successfully applied for the prediction performance optimization of the MCVIMRF_Med ensemble model. To further investigate the performance of the MCVIMRF_Med ensemble model, the performance of it was compared with partial least squares, RF, VIMRF, and MCVIMRF calibration models. It shows that the MCVIMRF_Med ensemble model can achieve a better prediction result for the density of energetic materials, with R 2 CV of 0.9596, RMSECV of 0.0437 g/cm3, R 2 P of 0.9768, RMSEP of 0.0578 g/cm3, and relative analysis deviation of prediction set of 3.951. Therefore, the MCVIMRF_Med ensemble modeling strategy combined with QSPR is an effective approach for the density prediction of energetic materials. This work is expected to provide new research ideas and technical support for accurate prediction of detonation performance of energetic materials.

Accelerating Molecular Design of Cage Energetic Materials with Zero Oxygen Balance through Large-Scale Database Search.

Domain-related knowledge promoted high-throughput cage scaffold screening from the ZINC15 database containing over 130 000 scaffolds and cooperated with combinatorial design to alleviate the lack of cage energetic materials. A dozen candidates were discovered that show excellent energy and safety performance, confirming the effectiveness of our strategy.

When Do Good Deeds Lead to Good Feelings? Eudaimonic Orientation Moderates the Happiness Benefits of Prosocial Behavior.

Engaging in prosocial behavior is considered an effective way to increase happiness in a sustainable manner. However, there is insufficient knowledge about the conditions under which such a happiness effect occurs. From a person-activity congruence perspective, we proposed that an individual's eudaimonic orientation moderates the effect of prosocial behavior on happiness, whereas hedonic orientation does not. For this purpose, 128 participants were assigned to play a game in which half of them were explained the benevolence impact of playing the game (the benevolence condition), and the other half played the same game without this knowledge (the control condition). Participants' eudaimonic and hedonic orientations were assessed before the game, and their post-task happiness were measured after the game. The results showed that participants in the benevolence condition reported higher post-task positive affect than those in the control condition. Furthermore, this happiness effect was moderated by participants' eudaimonic orientation-participants with high eudaimonic orientation reaped greater benefits from benevolence, and their hedonic orientation did not moderate the relationship between benevolence and happiness. The importance of the effect of person-activity congruence on happiness is discussed, along with the implications of these findings for sustainably pursuing happiness.

Structure-property relationship of nitramino oxetane polymers: a computational study on the effect of pendant chains.

A comprehensive study of the effect of the structure of pendant chains on the energetic and mechanical properties of nitramino oxetane polymers has been conducted. Enthalpy of formation (EOF), density, glass transition temperature, and elastic moduli were calculated via quantum mechanics and molecular dynamic simulations. It is shown in this study that -CH2 groups are unfavorable for EOFs, densities, and elastic moduli of the polymers, whereas -NCH3NO2 groups are favorable for these parameters. The glass transition temperature (T g) shows non-monotonic features with increasing -CH2 groups; it reaches a minimum value when the pendant chains consist of 1 or 2 -CH2 groups. Moreover, the location of the pendant chains can strongly affect T g of the polymers. Our study suggests that the asymmetric structure, distantly located pendant chains and appropriate length of the pendant chains can effectively reduce T g of the polymers with negligible compromise to other properties.

Theoretical study on polynitro imidazo [4, 5-e] oxadiazolo [3, 4-b] pyrazine compounds.

The B3PW91/6-31G** theoretical method was carried out to optimize the structure of 12 polynitro imidazo [4,5-e] oxadiazolo [3,4-b] pyrazine compounds (two structural type). The influence of nitro groups on the structure, oxygen balance, density, heat of formation, detonation performances, and charge were investigated. The results showed that the oxygen balance, density, heat of formation, detonation velocity, detonation pressure, and detonation heat increased with different relationships when the number of nitro groups increased. The contribution of the dinitroethylene group to energy was greater than that of the nitroimino group. On the whole, the sensitivity of all compounds increased with the number of -NO2 groups, and the second type of compound is more sensitive because of more nitro groups. The alkaline of the amine will decrease with the increasing number of -NO2 groups, and nitrification action will become more difficult. Graphical abstract Polynitro imidazo [4, 5-e] oxadiazolo [3, 4-b] pyrazine compoundsᅟ.

Roads to pentazolate anion: a theoretical insight.

The formation mechanism of pentazolate anion (PZA) is not yet clear. In order to present the possible formation pathways of PZA, the potential energy surfaces of phenylpentazole (PPZ), phenylpentazole radical (PPZ-R), phenylpentazole radical anion (PPZ-RA), PPZ and m-chloroperbenzoic acid (m-CPBA), p-pentazolylphenolate anion (p-PZPolA) and m-CPBA, and p-pentazolylphenol (p-PZPol) and m-CPBA were calculated by the computational electronic structure methods including the hybrid density functional, the double hybrid density functional and the coupled-cluster theories. At the thermodynamic point of view, the cleavages of C-N bonds of PPZ and PPZ-R need to absorb large amounts of heat. Thus, they are not feasible entrance for PZA formation at ambient condition. But excitation of PPZ and deprotonation of PPZ-RA probably happen before cleavage of C-N bond of PPZ at high-energy condition. As to the radical anion mechanism, the high accuracy calculations surveyed that the barrier of PZA formation is probably lower than that of dinitrogen evolution, but the small ionization potential of PPZ-RA gives rise to the unstable ionic pair of sodium PPZ at high temperature. In respect of oxidation mechanism, except for PPZ, the reactions of p-PZPolA and p-PZPol with m-CPBA can form PZA and quinone. The PZA formations have the barriers of about 20 kcal mol-1 which compete with the dinitrogen evolutions. The stabilities of PZA in both solid and gas phases were also studied herein. The proton prefers to transfer to pentazolyl group in the (N5)6(H3O)3(NH4)4Cl system which leads to the dissociation of pentazole ring. The ground states of M(N5)2(H2O)4 (M = Co, Fe and Mn) are high-spin states. The pentazolyl groups confined by the crystal waters in the coordinate compounds can improve the kinetic stability. As to the reactivity of PZA, it can be persistently oxidized by m-CPBA to oxo-PZA and 1,3-oxo-PZA with the barriers of about 20 kcal mol-1.

Adsorption behavior of acetone solvent at the HMX crystal faces: A molecular dynamics study.

Molecular dynamics simulations have been performed to understand the adsorption behavior of acetone (AC) solvent at the three surfaces of 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctan (HMX) crystal, i.e. (011), (110), and (020) faces. The simulation results show that the structural features and electrostatic potentials of crystal faces are determined by the HMX molecular packing, inducing distinct mass density distribution, dipole orientation, and diffusion of solvent molecules in the interfacial regions. The solvent adsorption is mainly governed by the van der Waals forces, and the crystal-solvent interaction energies among three systems are ranked as (020)≈(110)>(011). The adsorption sites for solvent incorporation at the crystal surface were found and visualized with the aid of occupancy analysis. A uniform arrangement of adsorption sites is observed at the rough (020) surface as a result of ordered adsorption motif.

Face-Dependent Solvent Adsorption: A Comparative Study on the Interfaces of HMX Crystal with Three Solvents.

To understand the crystal-solvent interfacial interactions on the molecular scale, the interfaces between three solvents, that is, acetone, γ-butyrolactone, and cyclohexanone, and three growth faces of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) crystal have been investigated with the aid of theoretical chemistry. The results show that the structural features of crystal faces play a critical role in the energetic, structural, and dynamic properties at the interfaces. For each solvent, the same change trend of some properties among the three faces of HMX crystal is observed, including adsorption affinity, local mass density, and solvent diffusion. For example, the rate of solvent diffusion at the three faces ranks as (011) > (110) > (020) regardless of solvent species. This can be attributed to the similar adsorption sites for solvent incorporation at the same face, which are concentrated at the cavities formed by surficial HMX molecules.

Study on the computer-aided design of high energetic compounds based on the 1,2,3,4-tetrazine-1,3-dioxide frame.

In order to discover more potential high energy compounds, five computer-aided design methods were founded, and 20 high energetic compounds based on the 1,2,3,4-tetrazine-1,3-dioxide frame were designed. The first step of computer-aided design methods was to design new frame M. Three combination rules were invented, they were simple double-points rule, complicated double-points rule, and complicated multi-points rule. The second step of computer-aided design methods was to design 1,2,3,4-tetrazine 1,3-dioxides derivants by connecting M to 1,2,3,4-tetrazine-1,3-dioxides. Two combination rules were invented, they were simple single-points rule and double-points rule. All the structures are ring-fused or caged compounds including 1,2,3,4-tetrazine-1,3-dioxide. In these compounds, almost half of them have positive or zero oxygen balances, and the nitrogen contents of 17 compounds are over 40%. The densities and detonation velocities of all compounds are over 1.98 g cm-3 and 9500 m s-1 respectively. -N = N- group and -NO2 group have a major contribution to enthalpy of formation, detonation heat, and power index. -O- group and -ONO2 group have the main contribution to density, detonation velocity, and detonation pressure.

Theoretical study of the effect of N-oxides on the performances of energetic compounds.

In order to study the effects of N-oxide on structure and performance, six categories of energetic compounds were systemically investigated. The results indicated that the C-C bonds in the rings were shortened, and the C-N bonds close to the N → O bond were elongated when N atoms was oxidized to form N → O bonds. N → O bonds can increase the densities of most categories of compounds, and the increment will increase with the number of N → O bonds. As to their detonation performances, almost all categories of compounds had an increased trend, except for some NO2-, NHNO2- and ONO2-substituted compounds. The contribution of 1,2,3,4-tetrazine and 1,2,4,5-tetrazine to performances was better than that of pyrazine and [1,2,5] oxadiazolo [3,4-b] pyrazine on the whole, and the groups, especially energetic groups, made a huge contribution to performance. When R was a NH2 or ONO2 group, all compounds had lower impact sensitivities, and thus represent candidates for novel energetic compounds. However, other than the sixth category of compounds, all compounds had higher impact sensitivities when R was a NO2 or NHNO2 group, and have little significance in application.

Ordered and layered structure of liquid nitromethane within a graphene bilayer: toward stabilization of energetic materials through nanoscale confinement.

The structural characteristics involving thermal stabilities of liquid nitromethane (NM)­one of the simplest energetic materials­confined within a graphene (GRA) bilayer were investigated by means of all-atom molecular dynamics simulations and density functional theory calculations. The results show that ordered and layered structures are formed at the confinement of the GRA bilayer induced by the van der Waals attractions of NM with GRA and the dipole-dipole interactions of NM, which is strongly dependent on the confinement size, i.e., the GRA bilayer distance. These unique intermolecular arrangements and preferred orientations of confined NM lead to higher stabilities than bulk NM revealed by bond dissociation energy calculations.

Structural characteristics of liquid nitromethane at the nanoscale confinement in carbon nanotubes.

The stability of energetic materials confined in the carbon nanotubes can be improved at ambient pressure and room temperature, leading to potential energy storage and controlled energy release. However, the microscopic structure of confined energetic materials and the role played by the confinement size are still fragmentary. In this study, molecular dynamics simulations have been performed to explore the structural characteristics of liquid nitromethane (NM), one of the simplest energetic materials, confined in a series of armchair single-walled carbon nanotubes (SWNTs) changing from (5,5) to (16,16) at ambient conditions. The simulation results show that the size-dependent ordered structures of NM with preferred orientations are formed inside the tubular cavities driven by the van der Waals attractions between NM and SWNT together with the dipole-dipole interactions of NM, giving rise to a higher local mass density than that of bulk NM. The NM dipoles prefer to align parallel along the SWNT axis in an end-to-end fashion inside all the nanotubes except the (7,7) SWNT where a unique staggered orientation of NM dipoles perpendicular to the SWNT axis is observed. As the SWNT radius increases, the structural arrangements and dipole orientations of NM become disordered as a result of the weakening of van der Waals interactions between NM and SWNT.

Design and theoretical study of 15 novel high energy density compounds.

In order to seek the potential high energy density compounds (HEDCs) with excellent performance and satisfactory safety, some combination rules are presented and 15 HEDCs are designed and sifted, and followed by the properties predicting. From the results, HEDC-3, HEDC-4, HEDC-9, HEDC-10, HEDC-11, HEDC-12, HEDC-13, and HEDC-14 have good comprehensive properties. They are furoxan, fused ring or cage-type compounds, whose frame is composed of some single ring by single (double or multi) point addition. Their densities are over 1.95 g cm(-3), and detonation velocities are over 9500 m s(-1). Their BDEs are over 85 kJ mol(-1), and the values of available free space (∆V) are lower than the ∆V of ß-CL20 (∆V = 86). In view of the synthesis feasibility, the synthesis routes of HEDC-4, HEDC-9, HEDC-10, HEDC-12, HEDC-13, and HEDC-14 have been designed.