RESUMO
Ammonium vanadates, featuring an NâH···O hydrogen bond network structure between NH4 + and VâO layers, have become popular cathode materials for aqueous zinc-ion batteries (AZIBs). Their appeal lies in their multi-electron transfer, high specific capacity, and facile synthesis. However, a major drawback arises as Zn2+ ions tend to form bonds with electronegative oxygen atoms between VâO layers during cycling, leading to irreversible structural collapse. Herein, Li+ pre-insertion into the intermediate layer of NH4V4O10 is proposed to enhance the electrochemical activity of ammonium vanadate cathodes for AZIBs, which extends the interlayer distance of NH4V4O10 to 9.8 Å and offers large interlaminar channels for Zn2+ (de)intercalation. Moreover, Li+ intercalation weakens the crystallinity, transforms the micromorphology from non-nanostructured strips to ultrathin nanosheets, and increases the level of oxygen defects, thus exposing more active sites for ion and electron transport, facilitating electrolyte penetration, and improving electrochemical kinetics of electrode. In addition, the introduction of Li+ significantly reduces the bandgap by 0.18 eV, enhancing electron transfer in redox reactions. Leveraging these unique advantages, the Li+ pre-intercalated NH4V4O10 cathode exhibits a high reversible capacity of 486.1 mAh g-1 at 0.5 A g-1 and an impressive capacity retention rate of 72% after 5,000 cycles at 5 A g-1.
RESUMO
Botulinum neurotoxins (BoNTs) are among the deadliest of bacterial toxins. BoNT serotype A and B in particular pose the most serious threat to humans because of their high potency and persistence. To date, there is no effective treatment for late post-exposure therapy of botulism patients. Here, we aim to develop single-domain variable heavy-chain (VHH) antibodies targeting the protease domains (also known as the light chain, LC) of BoNT/A and BoNT/B as antidotes for post-intoxication treatments. Using a combination of X-ray crystallography and biochemical assays, we investigated the structures and inhibition mechanisms of a dozen unique VHHs that recognize four and three non-overlapping epitopes on the LC of BoNT/A and BoNT/B, respectively. We show that the VHHs that inhibit the LC activity occupy the extended substrate-recognition exosites or the cleavage pocket of LC/A or LC/B and thus block substrate binding. Notably, we identified several VHHs that recognize highly conserved epitopes across BoNT/A or BoNT/B subtypes, suggesting that these VHHs exhibit broad subtype efficacy. Further, we identify two novel conformations of the full-length LC/A, that could aid future development of inhibitors against BoNT/A. Our studies lay the foundation for structure-based engineering of protein- or peptide-based BoNT inhibitors with enhanced potencies and cross-subtypes properties.
Assuntos
Toxinas Botulínicas/antagonistas & inibidores , Peptídeo Hidrolases/química , Anticorpos de Domínio Único , Animais , Toxinas Botulínicas/química , Inibidores de Proteases/farmacologia , Domínios Proteicos/efeitos dos fármacos , Anticorpos de Domínio Único/farmacologia , Relação Estrutura-AtividadeRESUMO
Sodium superionic conductor (NASICON)-type Na3 V2 (PO4 )3 has attracted considerable interest owing to its stable three-dimensional framework and high operating voltage; however, it suffers from a low-energy density due to the poor intrinsic electronic conductivity and limited redox couples. Herein, the partial substitution of Mn3+ for V3+ in Na3 V2 (PO4 )3 is proposed to activate V4+ /V5+ redox couple for boosting energy density of the cathodes (Na3 V2- x Mnx (PO4 )3 ). With the introduction of Mn3+ into Na3 V2 (PO4 )3 , the band gap is significantly reduced by 1.406 eV and thus the electronic conductivity is greatly enhanced. The successive conversions of four stable oxidation states (V2+ /V3+ , V3+ /V4+ , and V4+ /V5+ ) are also successfully achieved in the voltage window of 1.4-4.0 V, corresponding to three electrons involved in the reversible reaction. Consequently, the cathode with x = 0.5 exhibits a high reversible discharge capacity of 170.9 mAh g-1 at 0.5 C with an ultrahigh energy density of 577 Wh kg-1 . Ex-situ x-ray diffraction (XRD) analysis reveals that the sodium-storage mechanism for Mn-doped Na3 V2 (PO4 )3 consists of single-phase and bi-phase reactions. This work deepens the understanding of the activation of reversible three-electron reaction in NASICON-structured polyanionic phosphates and provides a feasible strategy to develop high-energy-density cathodes for sodium-ion batteries.
RESUMO
Aqueous zinc-ion batteries (AZIBs) have attracted considerable attention due to their low cost and environmental friendliness. However, the rampant dendrite growth and severe side reactions during plating/stripping on the surface of zinc (Zn) anode hinder the practicability of AZIBs. Herein, an effective and non-toxic cationic electrolyte additive of Rb2 SO4 is proposed to address the issues. The large cation of Rb+ is preferentially adsorbed on the surface of Zn metal to induce a strong shielding effect for realizing the lateral deposition of Zn2+ ions along the Zn surface and isolating water from Zn metal to effectively inhibit side reactions. Consequently, the Zn||Zn symmetric cell with the addition of 1.5 mm Rb2 SO4 can cycle more than 6000 h at 0.5 mA cm-2 /0.25 mAh cm-2 , which is 20 times longer than that without Rb2 SO4 . Besides, the Zn||Cu asymmetric cell with Rb2 SO4 achieves a very high average Coulombic efficiency of 99.16% up to 500 cycles. Moreover, the electrolyte with Rb2 SO4 well matches with the VO2 cathode, achieving high initial capacity of 412.7 mAh g-1 at 5 A g-1 and excellent cycling stability with a capacity retention of 71.6% at 5 A g-1 after 500 cycles for the Zn//VO2 full cell.
RESUMO
De novo protein design holds promise for creating small stable proteins with shapes customized to bind therapeutic targets. We describe a massively parallel approach for designing, manufacturing and screening mini-protein binders, integrating large-scale computational design, oligonucleotide synthesis, yeast display screening and next-generation sequencing. We designed and tested 22,660 mini-proteins of 37-43 residues that target influenza haemagglutinin and botulinum neurotoxin B, along with 6,286 control sequences to probe contributions to folding and binding, and identified 2,618 high-affinity binders. Comparison of the binding and non-binding design sets, which are two orders of magnitude larger than any previously investigated, enabled the evaluation and improvement of the computational model. Biophysical characterization of a subset of the binder designs showed that they are extremely stable and, unlike antibodies, do not lose activity after exposure to high temperatures. The designs elicit little or no immune response and provide potent prophylactic and therapeutic protection against influenza, even after extensive repeated dosing.
Assuntos
Desenho de Fármacos , Influenza Humana/tratamento farmacológico , Influenza Humana/prevenção & controle , Terapia de Alvo Molecular/métodos , Engenharia de Proteínas/métodos , Proteínas/química , Proteínas/uso terapêutico , Toxinas Botulínicas/classificação , Toxinas Botulínicas/metabolismo , Simulação por Computador , Glicoproteínas de Hemaglutininação de Vírus da Influenza/metabolismo , Temperatura Alta , Humanos , Influenza Humana/metabolismo , Simulação de Dinâmica Molecular , Ligação Proteica , Estabilidade Proteica , Proteínas/imunologia , Proteínas/metabolismo , TemperaturaRESUMO
The bacterial flagellar motor is a self-assembling supramolecular nanodevice. Its spontaneous biosynthesis is initiated by the insertion of the MS ring protein FliF into the inner membrane, followed by attachment of the switch protein FliG. Assembly of this multiprotein complex is tightly regulated to avoid nonspecific aggregation, but the molecular mechanisms governing flagellar assembly are unclear. Here, we present the crystal structure of the cytoplasmic domain of FliF complexed with the N-terminal domain of FliG (FliF C -FliG N ) from the bacterium Helicobacter pylori Within this complex, FliF C interacted with FliG N through extensive hydrophobic contacts similar to those observed in the FliF C -FliG N structure from the thermophile Thermotoga maritima, indicating conservation of the FliF C -FliG N interaction across bacterial species. Analysis of the crystal lattice revealed that the heterodimeric complex packs as a linear superhelix via stacking of the armadillo repeat-like motifs (ARM) of FliG N Notably, this linear helix was similar to that observed for the assembly of the FliG middle domain. We validated the in vivo relevance of the FliG N stacking by complementation studies in Escherichia coli Furthermore, structural comparison with apo FliG from the thermophile Aquifex aeolicus indicated that FliF regulates the conformational transition of FliG and exposes the complementary ARM-like motifs of FliG N , containing conserved hydrophobic residues. FliF apparently both provides a template for FliG polymerization and spatiotemporally controls subunit interactions within FliG. Our findings reveal that a small protein fold can serve as a versatile building block to assemble into a multiprotein machinery of distinct shapes for specific functions.
Assuntos
Proteínas de Bactérias/metabolismo , Flagelos/química , Flagelos/metabolismo , Helicobacter pylori/metabolismo , Proteínas de Bactérias/genética , Cristalografia por Raios X , Flagelos/genética , Helicobacter pylori/química , Helicobacter pylori/genética , Ligação Proteica , Conformação Proteica , Thermotoga maritima/genética , Thermotoga maritima/metabolismoRESUMO
Bacterial flagella are rotary nanomachines that contribute to bacterial fitness in many settings, including host colonization. The flagellar motor relies on the multiprotein flagellar motor-switch complex to govern flagellum formation and rotational direction. Different bacteria exhibit great diversity in their flagellar motors. One such variation is exemplified by the motor-switch apparatus of the gastric pathogen Helicobacter pylori, which carries an extra switch protein, FliY, along with the more typical FliG, FliM, and FliN proteins. All switch proteins are needed for normal flagellation and motility in H. pylori, but the molecular mechanism of their assembly is unknown. To fill this gap, we examined the interactions among these proteins. We found that the C-terminal SpoA domain of FliY (FliYC) is critical to flagellation and forms heterodimeric complexes with the FliN and FliM SpoA domains, which are ß-sheet domains of type III secretion system proteins. Surprisingly, unlike in other flagellar switch systems, neither FliY nor FliN self-associated. The crystal structure of the FliYC-FliNC complex revealed a saddle-shaped structure homologous to the FliN-FliN dimer of Thermotoga maritima, consistent with a FliY-FliN heterodimer forming the functional unit. Analysis of the FliYC-FliNC interface indicated that oppositely charged residues specific to each protein drive heterodimer formation. Moreover, both FliYC-FliMC and FliYC-FliNC associated with the flagellar regulatory protein FliH, explaining their important roles in flagellation. We conclude that H. pylori uses a FliY-FliN heterodimer instead of a homodimer and creates a switch complex with SpoA domains derived from three distinct proteins.
Assuntos
Proteínas de Bactérias/metabolismo , Flagelos/química , Helicobacter pylori/química , Domínios e Motivos de Interação entre Proteínas , Multimerização Proteica , Sistemas de Secreção Tipo III/química , Cristalografia por Raios X , Flagelos/ultraestrutura , Proteínas de Membrana , Complexos Multiproteicos/química , Domínios ProteicosRESUMO
The flagellar motor is an important virulence factor in infection by many bacterial pathogens. Motor function can be modulated by chemotactic proteins and recently appreciated proteins that are not part of the flagellar or chemotaxis systems. How these latter proteins affect flagellar activity is not fully understood. Here, we identified spermidine synthase SpeE as an interacting partner of switch protein FliM in Helicobacter pylori using pull-down assay and mass spectrometry. To understand how SpeE contributes to flagellar motility, a speE-null mutant was generated and its motility behavior was evaluated. We found that deletion of SpeE did not affect flagellar formation, but induced clockwise rotation bias. We further determined the crystal structure of the FliM-SpeE complex at 2.7 Å resolution. SpeE dimer binds to FliM with micromolar binding affinity, and their interaction is mediated through the ß1' and ß2' region of FliM middle domain. The FliM-SpeE binding interface partially overlaps with the FliM surface that interacts with FliG and is essential for proper flagellar rotational switching. By a combination of protein sequence conservation analysis and pull-down assays using FliM and SpeE orthologues in E. coli, our data suggest that FliM-SpeE association is unique to Helicobacter species.
Assuntos
Proteínas de Bactérias/metabolismo , Espermidina Sintase/metabolismo , Sítios de Ligação , Movimento Celular , Escherichia coli/metabolismo , Flagelos/metabolismo , Helicobacter pylori/metabolismo , Espectrometria de Massas , Proteínas de Membrana/metabolismo , Modelos Moleculares , Ligação Proteica , Elementos Estruturais de ProteínasRESUMO
Nanofibrous silver (Ag)/poly(vinylidene fluoride) (PVDF) composite membranes were obtained from a two-step preparation method. In the first step, the electrospun silver nitrate (AgNO3)/PVDF membranes were prepared and the influence of the AgNO3 content on the electrospinning process was studied. According to scanning electron microscopy (SEM) results, when the electrospinning solution contained AgNO3 in the range between 3 to 7 wt.%, the nanofiber morphologies can be obtained. In the second step, the electrospun AgNO3/PVDF membranes were reduced by sodium borohydride to form the nanofibrous Ag/PVDF composite membranes. The resultant composite membranes were characterized by SEM, X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), differential scanning calorimetry, X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared. The XRD, XPS, and EDS characterizations proved the existence of Ag in the nanofibrous Ag/PVDF composite membranes. The crystallinity degree of PVDF for composite membranes declined with the increase in Ag content. More importantly, the nanofibrous Ag/PVDF composite membranes had obviously higher Rosseland extinction coefficients and lower thermal radiative conductivities in comparison with electrospun PVDF membrane, which demonstrates that such composite membranes with high porosity, low density, and good water vapor permeability are promising thermal insulating materials to block the heat transfer resulting from thermal radiation. In addition, three different methods for surface modification have been used to successfully improve the hydrophobicity of nanofibrous Ag/PVDF composite membranes.
RESUMO
This paper reports the fabrication, characterization, and microparticle manipulation capability of an adjustable multi-scale single beam acoustic tweezers (SBAT) that is capable of flexibly changing the size of "tweezers" like ordinary metal tweezers with a single-element ultrahigh frequency (UHF) ultrasonic transducer. The measured resonant frequency of the developed transducer at 526 MHz is the highest frequency of piezoelectric single crystal based ultrasonic transducers ever reported. This focused UHF ultrasonic transducer exhibits a wide bandwidth (95.5% at -10 dB) due to high attenuation of high-frequency ultrasound wave, which allows the SBAT effectively excite with a wide range of excitation frequency from 150 to 400 MHz by using the "piezoelectric actuator" model. Through controlling the excitation frequency, the wavelength of ultrasound emitted from the SBAT can be changed to selectively manipulate a single microparticle of different sizes (3-100 µm) by using only one transducer. This concept of flexibly changing "tweezers" size is firstly introduced into the study of SBAT. At the same time, it was found that this incident ultrasound wavelength play an important role in lateral trapping and manipulation for microparticle of different sizes. Biotechnol. Bioeng. 2017;114: 2637-2647. © 2017 Wiley Periodicals, Inc.
Assuntos
Acústica/instrumentação , Separação Celular/instrumentação , Micromanipulação/instrumentação , Transdutores , Ultrassonografia/instrumentação , Separação Celular/métodos , Desenho de Equipamento , Análise de Falha de Equipamento , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
FliG and FliM are switch proteins that regulate the rotation and switching of the flagellar motor. Several assembly models for FliG and FliM have recently been proposed; however, it remains unclear whether the assembly of the switch proteins is conserved among different bacterial species. We applied a combination of pull-down, thermodynamic and structural analyses to characterize the FliM-FliG association from the mesophilic bacterium Helicobacter pylori. FliM binds to FliG with micromolar binding affinity, and their interaction is mediated through the middle domain of FliG (FliGM ), which contains the EHPQR motif. Crystal structures of the middle domain of H. pylori FliM (FliM(M)) and FliG(M) -FliM(M) complex revealed that FliG binding triggered a conformational change of the FliM α3-α1' loop, especially Asp130 and Arg144. We furthermore showed that various highly conserved residues in this region are required for FliM-FliG complex formation. Although the FliM-FliG complex structure displayed a conserved binding mode when compared with Thermotoga maritima, variable residues were identified that may contribute to differential binding affinities across bacterial species. Comparison of the thermodynamic parameters of FliG-FliM interactions between H. pylori and Escherichia coli suggests that molecular basis and binding properties of FliM to FliG is likely different between these two species.
Assuntos
Proteínas de Bactérias/química , Proteínas de Bactérias/metabolismo , Helicobacter pylori/química , Motivos de Aminoácidos , Centrifugação , Cristalografia por Raios X , Modelos Moleculares , Ligação Proteica , Conformação Proteica , Domínios e Motivos de Interação entre Proteínas , Mapeamento de Interação de Proteínas , TermodinâmicaRESUMO
Piezoelectric single crystals, which have excellent piezoelectric properties, have extensively been employed for various sensors and actuators applications. In this paper, the state-of-art in piezoelectric single crystals for ultrasonic transducer applications is reviewed. Firstly, the basic principles and design considerations of piezoelectric ultrasonic transducers will be addressed. Then, the popular piezoelectric single crystals used for ultrasonic transducer applications, including LiNbO3 (LN), PMN-PT and PIN-PMN-PT, will be introduced. After describing the preparation and performance of the single crystals, the recent development of both the single-element and array transducers fabricated using the single crystals will be presented. Finally, various biomedical applications including eye imaging, intravascular imaging, blood flow measurement, photoacoustic imaging, and microbeam applications of the single crystal transducers will be discussed.
RESUMO
Botulinum neurotoxins (BoNTs) are produced as progenitor toxin complexes (PTCs) by Clostridium botulinum. The PTCs are composed of BoNT and non-toxic neurotoxin-associated proteins (NAPs), which serve to protect and deliver BoNT through the gastrointestinal tract in food borne botulism. HA33 is a key NAP component that specifically recognizes host carbohydrates and helps enrich PTC on the intestinal lumen preceding its transport across the epithelial barriers. Here, we report the crystal structure of HA33 of type B PTC (HA33/B) in complex with lactose at 1.46Å resolution. The structural comparisons among HA33 of serotypes A-D reveal two different HA33-glycan interaction modes. The glycan-binding pockets on HA33/A and B are more suitable to recognize galactose-containing glycans in comparison to the equivalent sites on HA33/C and D. On the contrary, HA33/C and D could potentially recognize Neu5Ac as an independent receptor, whereas HA33/A and B do not. These findings indicate that the different oral toxicity and host susceptibility observed among different BoNT serotypes could be partly determined by the serotype-specific interaction between HA33 and host carbohydrate receptors. Furthermore, we have identified a key structural water molecule that mediates the HA33/B-lactose interactions. It provides the structural basis for development of new receptor-mimicking compounds, which have enhanced binding affinity with HA33 through their water-displacing moiety.
Assuntos
Toxinas Botulínicas/química , Toxinas Botulínicas/ultraestrutura , Lactose/química , Modelos Químicos , Modelos Moleculares , Água/química , Sítios de Ligação , Toxinas Botulínicas Tipo A , Simulação por Computador , Conformação Molecular , Ligação ProteicaRESUMO
Relaxor-based ferroelectric single crystals Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) have drawn much attention in the ferroelectric field because of their excellent piezoelectric properties and high electromechanical coupling coefficients (d33~2000 pC/N, kt~60%) near the morphotropic phase boundary (MPB). Ternary Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT) single crystals also possess outstanding performance comparable with PMN-PT single crystals, but have higher phase transition temperatures (rhombohedral to tetragonal Trt, and tetragonal to cubic Tc) and larger coercive field Ec. Therefore, these relaxor-based single crystals have been extensively employed for ultrasonic transducer applications. In this paper, an overview of our work and perspectives on using PMN-PT and PIN-PMN-PT single crystals for ultrasonic transducer applications is presented. Various types of single-element ultrasonic transducers, including endoscopic transducers, intravascular transducers, high-frequency and high-temperature transducers fabricated using the PMN-PT and PIN-PMN-PT crystals and their 2-2 and 1-3 composites are reported. Besides, the fabrication and characterization of the array transducers, such as phased array, cylindrical shaped linear array, high-temperature linear array, radial endoscopic array, and annular array, are also addressed.
Assuntos
Nióbio/química , Óxidos/química , Transdutores , Ultrassom/métodos , Cristalização/métodos , Desenho de Equipamento/métodos , Análise de Falha de Equipamento/métodos , Temperatura Alta , Temperatura de TransiçãoRESUMO
Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.
RESUMO
Currently, conversion-type transition metal sulfides have been extensively favored as the anodes for sodium-ion batteries due to their excellent redox reversibility and high theoretical capacity; however, they generally suffer from large volume expansion and structural instability during repeatedly Na+ de/intercalation. Herein, spatially dual-confined Ni-doped CoS2@NC@C microrods (Ni-CoS2@NC@C) are developed via structural design, heteroatom doping and carbon confinement to boost sodium storage performance of the material. The morphology of one-dimensional-structured microrods effectively enlarges the electrode/electrolyte contact area, while the confinement of dual-carbon layers greatly alleviates the volume change-induced stress, pulverization, agglomeration of the material during charging and discharging. Moreover, the introduction of Ni improves the electrical conductivity of the material by modulating the electronic structure and enlarges the interlayer distance to accelerate Na+ diffusion. Accordingly, the as-prepared Ni-CoS2@NC@C exhibits superb electrochemical properties, delivering the satisfactory cycling performance of 526.6 mA h g-1 after 250 cycles at 1 A g-1, excellent rate performance of 410.9 mA h g-1 at 5 A g-1 and superior long cycling life of 502.5 mA h g-1 after 1,500 cycles at 5 A g-1. This study provides an innovative idea to improve sodium storage performance of conversion-type transition metal sulfides through the comprehensive strategy of structural design, heteroatom doping and carbon confinement.
RESUMO
Aqueous zinc-ion batteries (AZIBs) have attracted significant attention owing to their inherent security, low cost, abundant zinc (Zn) resources and high energy density. Nevertheless, the growth of zinc dendrites and side reactions on the surface of Zn anodes during repeatedly plating/stripping shorten the cycle life of AZIBs. Herein, a simple organic molecule with abundant polar functional groups, 2,2,2-trifluoroether formate (TF), has been proposed as a high-efficient additive in the ZnSO4 electrolyte to suppress the growth of Zn dendrites and side reaction during cycling. It is found that TF molecules can infiltrate the solvated sheath layer of the hydrated Zn2+ to reduce the number of highly chemically active H2O molecules owing to their strong binding energy with Zn2+. Simultaneously, TF molecules can preferentially adsorb onto the Zn surface, guiding the uniform deposition of Zn2+ along the crystalline surface of Zn(002). This dual action significantly inhibits the formation of Zn dendrites and side reactions, thus greatly extending the cycling life of the batteries. Accordingly, the Zn//Cu asymmetric cell with 2 % TF exhibits stable cycling for more than 3,800 cycles, achieving an excellent average Columbic efficiency (CE) of 99.81 % at 2 mA cm-2/1 mAh cm-2. Meanwhile, the Zn||Zn symmetric cell with 2 % TF demonstrates a superlong cycle life exceeding 3,800 h and 2,400 h at 2 mA cm-2/1 mAh cm-2 and 5 mA cm-2/2.5 mAh cm-2, respectively. Simultaneously, the Zn//VO2 full cell with 2 % TF possesses high initial capacity (276.8 mAh/g) and capacity retention (72.5 %) at 5 A/g after 500 cycles. This investigation provides new insights into stabilizing Zn metal anodes for AZIBs through the co-regulation of Zn2+ solvated structure and surface crystallography.
RESUMO
Optical-resolution photoacoustic endoscopy (OR-PAE) has been proven to realize imaging on the vascular network in the gastrointestinal (GI) tract with high sensitivity and spatial resolution, providing morphological information. Various photoacoustic endoscopic catheters were developed to improve the resolution and adaptivity of in-vivo imaging. However, this technology has not yet been validated on in-vivo GI tumors, which generally feature angiogenesis. The tumor causes thickened mucosa and neoplasia, requiring large depth-of-field (DOF) in imaging, which contradicts to high-resolution imaging. In this work, a novel catheter was developed with a high resolution of â¼27â µm, providing a matched DOF of â¼400â µm to cover the vessels up to the submucosa layer. Optical-resolution photoacoustic endoscopic imaging was first performed on in-vivo rat rectal tumors. In addition, to further characterize the vessel morphology, tumor-suspected regions and normal regions were selected for quantification and analysis of vessel dimension distribution and tortuosity. All the results suggest that the OR-PAE has great application potential in tumor diagnosis, evaluation, and monitoring of therapeutic efficacy.
RESUMO
Similar to optical tweezers, a tightly focused ultrasound microbeam is needed to manipulate microparticles in acoustic tweezers. The development of highly sensitive ultrahigh frequency ultrasonic transducers is crucial for trapping particles or cells with a size of a few microns. As an extra lens would cause excessive attenuation at ultrahigh frequencies, two types of 200-MHz lensless transducer design were developed as an ultrasound microbeam device for acoustic tweezers application. Lithium niobate single crystal press-focused (PF) transducer and zinc oxide self-focused transducer were designed, fabricated and characterized. Tightly focused acoustic beams produced by these transducers were shown to be capable of manipulating single microspheres as small as 5 µm two-dimensionally within a range of hundreds of micrometers in distilled water. The size of the trapped microspheres is the smallest ever reported in the literature of acoustic PF devices. These results suggest that these lensless ultrahigh frequency ultrasonic transducers are capable of manipulating particles at the cellular level and that acoustic tweezers may be a useful tool to manipulate a single cell or molecule for a wide range of biomedical applications.
Assuntos
Biotecnologia/métodos , Som , Ultrassom/métodos , Microesferas , Tamanho da PartículaRESUMO
In this article, we investigate the application of contactless high frequency ultrasound microbeam stimulation (HFUMS) for determining the invasion potential of breast cancer cells. In breast cancer patients, the finding of tumor metastasis significantly worsens the clinical prognosis. Thus, early determination of the potential of a tumor for invasion and metastasis would significantly impact decisions about aggressiveness of cancer treatment. Recent work suggests that invasive breast cancer cells (MDA-MB-231), but not weakly invasive breast cancer cells (MCF-7, SKBR3, and BT-474), display a number of neuronal characteristics, including expression of voltage-gated sodium channels. Since sodium channels are often co-expressed with calcium channels, this prompted us to test whether single-cell stimulation by a highly focused ultrasound microbeam would trigger Ca(2+) elevation, especially in highly invasive breast cancer cells. To calibrate the diameter of the microbeam ultrasound produced by a 200-MHz single element LiNbO3 transducer, we focused the beam on a wire target and performed a pulse-echo test. The width of the beam was â¼17 µm, appropriate for single cell stimulation. Membrane-permeant fluorescent Ca(2+) indicators were utilized to monitor Ca(2+) changes in the cells due to HFUMS. The cell response index (CRI), which is a composite parameter reflecting both Ca(2+) elevation and the fraction of responding cells elicited by HFUMS, was much greater in highly invasive breast cancer cells than in the weakly invasive breast cancer cells. The CRI of MDA-MB-231 cells depended on peak-to-peak amplitude of the voltage driving the transducer. These results suggest that HFUMS may serve as a novel tool to determine the invasion potential of breast cancer cells, and with further refinement may offer a rapid test for invasiveness of tumor biopsies in situ.