Quantification of Microcystin-LR in Human Urine by Immunocapture Liquid Chromatography Tandem Mass Spectrometry.

Microcystins are toxins produced by many cyanobacteria species, which are often released into waterways during blue-green algal blooms in freshwater and marine habitats. The consumption of microcystin-contaminated water is a public health concern as these toxins are recognized tumor promoters and are hepatotoxic to humans and animals. A method to confirm human exposures to microcystins is needed; therefore, our laboratory has developed an immunocapture liquid chromatography tandem mass spectrometry (LC-MS/MS) method targeting the conserved adda portion of microcystins for the quantitation of a prevalent and highly toxic congener of microcystin, microcystin-LR (MC-LR). An acute exposure method was initially evaluated for accuracy and precision by analyzing calibrators and quality control (QC) samples ranging from 0.500 to 75.0 ng/mL in urine. All calibrators and QC samples characterized were within 15% of theoretical concentrations. An analysis of acutely exposed mouse urine samples using this method identified MC-LR levels from 10.7 to 33.9 ng/mL. Since human exposures are anticipated to result from low-dose or chronic exposures, a high-sensitivity method was validated with 20 calibration curves and QC samples ranging from 0.0100 to 7.50 ng/mL. Relative standard deviations (RSDs) and inaccuracies of these samples were within 15%, meeting United States Food and Drug Administration (FDA) guidelines for analytical methods, and the limit of detection was 0.00455 ng/mL. In conclusion, we have developed a method which can be used to address public health concerns by precisely and accurately measuring MC-LR in urine samples.

pH dependent octanol-water partitioning coefficients of microcystin congeners.

Hazardous algal blooms can generate toxic compounds with significant health impacts for exposed communities. The ubiquitous class of algal toxins known as microcystins exhibits significant heterogeneity in its peptide structure, which has been minimally studied, given the significant impact this has on hydrophobicity, acid/base character and related environmental fate and health effects. Octanol-water partition coefficients for the microcystin congeners MCLR, MCRR, MCLY, MCLF, and MCLA were calculated over an environmentally and physiologically relevant pH range. Microcystin-LR log(Kow) partition coefficient values were found to be consistent with previously established literature values, 1.67 to -1.41 between pH 1 and 8. Microcystin RR was found to be pH insensitive with a log(Kow) of -0.7. The remaining congeners exhibit similar pH dependence as MCLR, with systematic increases in hydrophobicity driven by the introduction of more hydrophobic residues to their variable amino acid region. The variation in pH dependent hydrophobicity suggests increased propensity for bioaccumulation and alternate environmental fates for differing microcystin forms, requiring further investigation.

National Estimate of Per- and Polyfluoroalkyl Substance (PFAS) Release to U.S. Municipal Landfill Leachate.

Landfills are the final stage in the life cycle of many products containing per- and polyfluoroalkyl substances (PFASs) and their presence has been reported in landfill leachate. The concentrations of 70 PFASs in 95 samples of leachate were measured in a survey of U.S. landfills of varying climates and waste ages. National release of PFASs was estimated by coupling measured concentrations for the 19 PFASs where more than 50% of samples had quantifiable concentrations, with climate-specific estimates of annual leachate volumes. For 2013, the total volume of leachate generated in the U.S. was estimated to be 61.1 million m3, with 79% of this volume coming from landfills in wet climates (>75 cm/yr precipitation) that contain 47% of U.S. solid waste. The mass of measured PFASs from U.S. landfill leachate to wastewater treatment plants was estimated to be between 563 and 638 kg for 2013. In the majority of landfill leachate samples, 5:3 fluorotelomer carboxylic acid (FTCA) was dominant and variations in concentrations with waste age affected total estimated mass. There were six PFASs that demonstrated significantly higher concentrations in leachate from younger waste compared to older waste and six PFAS demonstrated significant variation with climate.

Release of Per- and Polyfluoroalkyl Substances (PFASs) from Carpet and Clothing in Model Anaerobic Landfill Reactors.

Discarded carpet and clothing are potential sources of per- and polyfluoroalkyl substances (PFASs) in landfill leachate, but little is known about their release when disposed in landfills. The concentrations of 70 PFASs in the aqueous phase of anaerobic model landfill reactors filled with carpet or clothing were monitored under biologically active and abiotic conditions. For carpet, total PFAS release was greater in live than abiotic reactors, with an average of 8.5 nmol/L and 0.62 nmol/L after 552 days, respectively. Release in live carpet reactors was primarily due to 5:3 fluorotelomer carboxylic acid (FTCA - 3.9 nmol/L) and perfluorohexanoic carboxylic acid (PFHxA - 2.9 nmol/L). For clothing, release was more dependent on sample heterogeneity than the presence of biological activity, with 0.63, 21.7, 2.6, and 6.3 nmol/L for two live and two abiotic reactors after 519 days, respectively. Release in the clothing reactors was largely due to perfluorooctatonic carboxylic acid (PFOA), with low relative concentrations of measured biotransformation precursors (FTCAs). For carpet and clothing reactors, the majority of PFAS release was not measured until after day 100. Results demonstrate that carpet and clothing are likely sources of PFASs in landfill leachate.

Physical and Biological Release of Poly- and Perfluoroalkyl Substances (PFASs) from Municipal Solid Waste in Anaerobic Model Landfill Reactors.

A wide variety of consumer products that are treated with poly- and perfluoroalkyl substances (PFASs) and related formulations are disposed of in landfills. Landfill leachate has significant concentrations of PFASs and acts as secondary point sources to surface water. This study models how PFASs enter leachate using four laboratory-scale anaerobic bioreactors filled with municipal solid waste (MSW) and operated over 273 days. Duplicate reactors were monitored under live and abiotic conditions to evaluate influences attributable to biological activity. The biologically active reactors simulated the methanogenic conditions that develop in all landfills, producing ∼140 mL CH4/dry g refuse. The average total PFAS leaching measured in live reactors (16.7 nmol/kg dry refuse) was greater than the average for abiotic reactors (2.83 nmol/kg dry refuse), indicating biological processes were primarily responsible for leaching. The low-level leaching in the abiotic reactors was primarily due to PFCAs ≤C8 (2.48 nmol/kg dry refuse). Concentrations of known biodegradation intermediates, including methylperfluorobutane sulfonamide acetic acid and the n:2 and n:3 fluorotelomer carboxylates, increased steadily after the onset of methanogenesis, with the 5:3 fluorotelomer carboxylate becoming the single most concentrated PFAS observed in live reactors (9.53 nmol/kg dry refuse).

Field-Scale Demonstration of PFAS Leachability Following In Situ Soil Stabilization.

A field-scale validation is summarized comparing the efficacy of commercially available stabilization amendments with the objective of mitigating per- and polyfluoroalkyl substance (PFAS) leaching from aqueous film-forming foam (AFFF)-impacted source zones. The scope of this work included bench-scale testing to evaluate multiple amendments and application concentrations to mitigate PFAS leachability and the execution of field-scale soil mixing in an AFFF-impacted fire-training area with nearly 2.5 years of post-soil mixing monitoring to validate reductions in PFAS leachability. At the bench scale, several amendments were evaluated and the selection of two amendments for field-scale evaluation was informed: FLUORO-SORB Adsorbent (FS) and RemBind (RB). Five ∼28 m3 test pits (approximately 3 m wide by 3 m long by 3 m deep) were mixed at a site using conventional construction equipment. One control test pit (Test Pit 1) included Portland cement (PC) only (5% dry weight basis). The other four test pits (Test Pits 2 through 5) compared 5 and 10% ratios (dry weight basis) of FS and RB (also with PC). Five separate monitoring events included two to three sample cores collected from each test pit for United States Environmental Protection Agency (USEPA) Method 1315 leaching assessment. After 1 year, a mass balance for each test pit was attempted comparing the total PFAS soil mass before, during, and after leach testing. Bench-scale and field-scale data were in good agreement and demonstrated >99% decrease in total PFAS leachability (mass basis; >98% mole basis) as confirmed by the total oxidizable precursor assay, strongly supporting the chemical stabilization of PFAS.

A rapid assessment bioaccumulation screening (RABS) study design for emerging per-and polyfluoroalkyl substances in mice exposed to industrially impacted surface water.

The shift away from PFOS and PFOA production in the past 20 years towards shorter chain and replacement PFAS has led to the environmental release of complex mixtures of emerging PFAS for which bioaccumulation potential and toxicology are largely unknown. The rate at which emerging PFAS can be prioritized for research in these complex mixtures is often limited by the lack of available chemical standards. We developed a study design that rapidly assesses which emerging PFAS in an environmentally derived mixture have the potential for mammalian bioaccumulation and thus prioritize these emerging chemicals for standard synthesis and toxicity testing. Surface water was collected at an impacted site downstream of an industrial fluorochemical manufacturing outfall and concentrated 100-fold via weak anion exchange, solid-phase extraction. The concentrated extract contained 13 previously identified emerging PFAS, including hexafluoropropylene oxide-dimer acid (HFPO-DA). BALB/c mice were orally dosed with surface water concentrate once a day for seven days. Twenty-four hours after the last dose, liver, serum, urine, and feces were collected and the emerging PFAS were semi-quantified based on peak area counts. Of the 13 emerging PFAS, Nafion byproduct-2 (Nafion BP2), Hydro-EVE, PFO4DA, and PFO5DoA had the largest increases in percent composition when comparing serum and liver to the dosing solution, suggesting that these PFAS may have the highest bioaccumulation potential. This finding supports other studies that detected bioaccumulation of the same four PFAS in human serum collected from communities with contaminated drinking water. In the future, the Rapid Assessment Bioaccumulation Screening (RABS) study design can be extended to other complex industrial chemical mixtures impacting surface water in order to better inform chemical prioritization for acquisition and in vitro/in vivo toxicity testing of the potential pollutants.

Variability of Microcystin-LR Standards Available from Seven Commercial Vendors.

Microcystins (MCs) are a large group of heptapeptide cyanobacterial toxins commonly produced in harmful algal blooms (HABs) and associated with adverse health effects in wildlife, livestock, pets, and humans. MC chemical standards are extracted from cyanobacteria biomass rather than produced synthetically and are used in water assessment methods and toxicological studies. MC standards are generally supplied in less than 1 mg quantities, and verification of the mass can only be accomplished by analytical chemistry methods using a certified reference of the specific MC for comparison. Analytical quantification of MCs in environmental samples and toxicology studies using accurate doses of test chemicals administered to experimental animals rely on the availability and accuracy of chemical standards. To check the accuracy and purity of available standards, seven individual microcystin-LR (MCLR) standards were purchased from separate commercial vendors and analyzed to determine the actual mass supplied and identify the presence of potential contaminants. To determine the effect of varying toxin mass in toxicological studies, each MCLR standard was administered to CD-1 mice in doses based on mass purchased, by a single 40 µg/kg intraperitoneal injection. The measured mass purchased varied from the vendor label mass by more than 35% for two of the seven MCLR standards. Contaminants, including trifluoroacetic acid (TFA), were identified in four of the seven samples. Comparative in vivo hepatotoxicity between vendor samples closely reflected the actual amount of MCLR present in each standard and demonstrated the toxicological impact of varying cyanotoxin mass.

Characterization of per- and polyfluoroalkyl substances on fire suppression system piping and optimization of removal methods.

Fire suppression systems are known to be impacted with residual, entrained per- and polyfluoroalkyl substances (PFASs) because of historical use of aqueous film forming foam (AFFF) and fluoroprotein foam. Amphiphilic PFASs aggregate at liquid:solid interfaces creating a hydrophobic layer which reduces the effectiveness of water to remove PFAS from layered surfaces. When fire suppression systems are transitioned to fluorine free foam (F3) without appropriate cleaning, residual PFASs associated with the surfaces of the fire suppression system can contaminate the replacement F3. Release of residual PFASs from fire suppression systems into F3 has been documented; however, little is known about the residual PFASs associated with the surfaces of the fire suppression systems. More information is needed to develop methods to appropriately remove PFASs from fire suppression systems to prevent costly and inefficient foam transitioning and preserve the PFAS-free benefit of F3. The objective of this work was to evaluate the distribution and composition of PFASs on hangar piping exposed to PFAS-containing firefighting foam for a prolonged period. Two assessment methods were used: 1) extractions with methanol, water, and a proprietary aqueous organic solvent (Fluoro Fighter™); and 2) direct imaging methods of the surface. Extractions were analyzed with mass spectrometry and combustion ion chromatography. Results indicate pipe in contact with PFAS-containing firefighting foam can amass approximately 10 µg/cm2 of surface-associated PFAS residual following decades of exposure. Fluoro Fighter demonstrated higher PFAS removal per surface area of pipe than methanol (p = 0.007) or water extraction (p < 0.0001). Scanning electron microscope (SEM) images of the hangar piping reveal deposits suspected to be self-assembled PFAS layers, as evidenced by examination of pipe surfaces using X-ray photoelectron spectroscopy (XPS), which revealed atomic fluorine on the surface of the pipe.

Dose-Response Study of Microcystin Congeners MCLA, MCLR, MCLY, MCRR, and MCYR Administered Orally to Mice.

Microcystins are common freshwater cyanobacterial toxins that affect liver function. The toxicities of five microcystin congeners (microcystin-LA (MCLA), MCLR, MCLY, MCRR, and MCYR) commonly observed in harmful algal blooms (HABs) were evaluated in BALB/c mice after a single oral administration of doses ranging from those that were no observed adverse effect levels (NOAELs) to lowest observed adverse effect levels (LOAELs). Animals were monitored for changes in behavior and appearance, and euthanized 24 h after dosing. Test endpoints included clinical changes, necropsy observations, and serum indicators of hepatic toxicity and general homeostasis. Doses were 0.5-7 mg/kg MCLA, 0.5-11 mg/kg MCLR, 1-7 mg/kg MCLY, 7-22 mg/kg MCRR, and 3-11 mg/kg MCYR. MCLA at 3 mg/kg elevated liver/body weight ratio and liver score, ALT, AST, and GLDH, indicating hepatic toxicity, reduced serum glucose and highly elevated total serum bilirubin. MCLR and MCLY induced similar effects with LOAELs of 5 mg/kg, although a greater extent and severity of effects were observed in MCLR animals. MCRR exposure at 22 mg/kg was associated with reduced serum glucose. MCYR induced scattered liver effects at 7 mg/kg and reduced serum glucose levels at 5 mg/kg. The results indicate significant differences in congener-induced toxicity after microcystin exposure.

Waste type, incineration, and aeration are associated with per- and polyfluoroalkyl levels in landfill leachates.

Per- and polyfluoroalkyl substances (PFAS) are found in many consumer products which will be ultimately disposed in landfills. Limiting environmental contamination and future exposures will require managing leachates from different types of landfills, each with different PFAS levels depending upon the source of the waste. The objective of this study was to evaluate the influence of waste type and on-site treatment on PFAS levels in landfill leachates. Eleven PFAS species (7 carboxylic acids, 3 sulfonic acids, and 5:3 fluorotelomer carboxylic acid) were evaluated in leachates from municipal solid waste (MSW), construction and demolition (C&D), MSW ash (MSWA), and a mixture of MSWA and MSW with landfill gas condensate (MSWA/MSW-GC). Leachates were also analyzed before and after on-site treatment at two of these facilities. Results indicate that MSWA leachate had significantly lower PFAS levels relative to other leachate types. Lower total PFAS concentrations in MSWA leachates were correlated with an increase in incineration temperature (R2 = 0.92, p = 0.008). The levels of PFAS in untreated C&D and untreated MSW leachate were similar. The levels of targeted PFAS species in MSW leachate for one of the facilities evaluated increased after on-site landfill treatment presumably due to the conversion of PFAS precursors in the untreated leachate sample.

The Comparative Toxicity of 10 Microcystin Congeners Administered Orally to Mice: Clinical Effects and Organ Toxicity.

Microcystins (MCs) are common cyanobacterial toxins that occur in freshwaters worldwide. Only two of the >200 MC variants have been tested for potential toxicity after oral exposure. This paper reports on the toxicity of 10 different MC congeners identified in algal blooms, microcystin-LR (MCLR), MCLA, MCLF, MCLW, MCLY, MCRR, [Asp3]MCRR, [Asp3,Dhb7]MCRR, MCWR, and MCYR after single administrations to BALB/c mice. In a preliminary MCLR dose-response study of 3 to 9 mg/kg doses, ≥5 mg/kg induced clinical changes, increased serum levels of ALT, AST, and GLDH, liver congestion, increased liver/body weight ratios, and reduced serum glucose and total protein. Based on the extent of these effects, the 10 congeners were administered as single 7 mg/kg oral doses and toxicity evaluated. The greatest toxicity was observed with MCLA and MCLR including a high percentage of moribundity. In addition to eliciting effects similar to those listed above for MCLR, MCLA also induced serum alterations indicative of jaundice. MCLY, and MCYR induced changes like those noted with MCLR, but to lesser extents. MCLW and MCLF exhibited some serum and morphological changes associated with hepatic toxicity, while there were few indications of toxicity after exposures to MCRR, [Asp3]MCRR, [Asp3,Dhb7]MCRR, or MCWR. These data illustrate a wide spectrum of hepatic effects and different potencies of these MC congeners.

Toxicity of Balb-c mice exposed to recently identified 1,1,2,2-tetrafluoro-2-[1,1,1,2,3,3-hexafluoro-3-(1,1,2,2-tetrafluoroethoxy)propan-2-yl]oxyethane-1-sulfonic acid (PFESA-BP2).

1,1,2,2-tetrafluoro-2-[1,1,1,2,3,3-hexafluoro-3-(1,1,2,2-tetrafluoroethoxy)propan-2-yl]oxyethane-1-sulfonic acid (PFESA-BP2) was first detected in 2012 in the Cape Fear River downstream of an industrial manufacturing facility. It was later detected in the finished drinking water of municipalities using the Cape Fear River for their water supply. No toxicology data exist for this contaminant despite known human exposure. To address this data gap, mice were dosed with PFESA-BP2 at 0, 0.04, 0.4, 3, and 6 mg/kg-day for 7 days by oral gavage. As an investigative study, the final dose groups evolved from an original dose of 3 mg/kg which produced liver enlargement and elevated liver enzymes. The dose range was extended to explore a no effect level. PFESA-BP2 was detected in the sera and liver of all treated mice. Treatment with PFESA-BP2 significantly increased the size of the liver for all mice at 3 and 6 mg/kg-day. At the 6 mg/kg-day dose, the liver more than doubled in size compared to the control group. Male mice treated with 3 and 6 mg/kg-day and females treated with 6 mg/kg-day demonstrated significantly elevated serum markers of liver injury including alanine aminotransferase (ALT), glutamate dehydrogenase (GLDH), and liver/body weight percent. The percent of PFESA-BP2 in serum relative to the amount administered was similar in male and female mice, ranged from 9 to 13 %, and was not related to dose. The percent accumulation in the liver of the mice varied by sex (higher in males), ranged from 30 to 65 %, and correlated positively with increasing dose level.

Gas-Phase Detection of Fluorotelomer Alcohols and Other Oxygenated Per- and Polyfluoroalkyl Substances by Chemical Ionization Mass Spectrometry.

Per- and polyfluoroalkyl substances (PFAS) are incorporated into an ever-increasing number of modern products and inevitably enter the environment and ultimately human bodies. Herein, we show that chemical ionization mass spectrometry with iodide reagent ion chemistry is a useful technique for the detection of fluorotelomer alcohols (FTOHs) and other oxygenated PFAS, including per- and polyfluoro carboxylic acids such as hexafluoropropylene oxide dimer acid. This technique offers direct, high-time resolution measurement capability with parts per trillion by volume (nanograms per cubic meter) gas-phase detection limits. Measurements were taken by direct volatilization of samples without prior processing, allowing for fast measurements and reduced sample treatment compared to established PFAS methods. We demonstrate the utility of this technique by sampling volatile and semivolatile PFAS from fluoro additives and fluoro products to quantify levels of FTOHs and identify additional fluorinated compounds for which standards were unavailable.

Fluorinated Compounds in U.S. Fast Food Packaging.

Per- and polyfluoroalkyl substances (PFASs) are highly persistent synthetic chemicals, some of which have been associated with cancer, developmental toxicity, immunotoxicity, and other health effects. PFASs in grease-resistant food packaging can leach into food and increase dietary exposure. We collected ~400 samples of food contact papers, paperboard containers, and beverage containers from fast food restaurants throughout the United States and measured total fluorine using particle-induced γ-ray emission (PIGE) spectroscopy. PIGE can rapidly and inexpensively measure total fluorine in solid-phase samples. We found that 46% of food contact papers and 20% of paperboard samples contained detectable fluorine (>16 nmol/cm2). Liquid chromatography/high-resolution mass spectrometry analysis of a subset of 20 samples found perfluorocarboxylates, perfluorosulfonates, and other known PFASs and/or unidentified polyfluorinated compounds (based on nontargeted analysis). The total peak area for PFASs was higher in 70% of samples (10 of 14) with a total fluorine level of >200 nmol/cm2 compared to six samples with a total fluorine level of <16 nmol/cm2. Samples with high total fluorine levels but low levels of measured PFASs may contain volatile PFASs, PFAS polymers, newer replacement PFASs, or other fluorinated compounds. The prevalence of fluorinated chemicals in fast food packaging demonstrates their potentially significant contribution to dietary PFAS exposure and environmental contamination during production and disposal.

Orthogonal zirconium diol/C18 liquid chromatography-tandem mass spectrometry analysis of poly and perfluoroalkyl substances in landfill leachate.

Leachates coming from landfills contain a myriad of compounds of potential environmental and human health concern, including per- and polyfluorinated alkyl substances (PFASs). Micro liquid-liquid extraction was combined with a 900µl large volume injection (LVI) for the analysis of 70 PFASs in landfill leachate by orthogonal LC-MS/MS. The LVI approach introduced 7 times more extract than conventional injection approaches. Two zirconium-modified diol guard columns effectively retained PFASs from the organic leachate extract and an analytical C18 column was used for separation. Method accuracy and precision for PFASs with analytical grade reference materials ranged from 81-120% and 5.5-33%, respectively. Estimated method detection limits in the low to sub-ng/L. Seven landfill leachates were analyzed by the optimized analytical method for the purposes of method demonstration. Leachates were characterized by a wide variety of PFASs, reporting on 36 previously-unanalyzed PFASs in leachate. Perfluoroalkyl carboxylates were the most abundant class detected while phosphorous-containing PFASs, present in all leachates, were at low concentrations. The 3-perfluoropentyl propanoate (5:3 FTCA) was the most concentrated analyte in most samples and constitutes a previously unreported but significant component of landfill leachate.