Exploration of polyamide structure-property relationships by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

RATIONALE: Polyamides (PA) are among the most used classes of polymers because of their attractive properties. Depending on the nature and proportion of the co-monomers used for their synthesis, they can exhibit a very large range of melting temperatures (Tm ). This study aims at the correlation of data from mass spectrometry (MS) with differential scanning calorimetry (DSC) and X-ray diffraction analyses to relate molecular structure to physical properties such as melting temperature, enthalpy change and crystallinity rate. METHODS: Six different PA copolymers with molecular weights around 3500 g mol(-1) were synthesized with varying proportions of different co-monomers (amino-acid AB/di-amine AA/di-acid BB). Their melting temperature, enthalpy change and crystallinity rate were measured by DSC and X-ray diffraction. Their structural characterization was carried out by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Because of the poor solubility of PA, a solvent-free sample preparation strategy was used with 2,5-dihydroxybenzoic acid (2,5-DHB) as the matrix and sodium iodide as the cationizing agent. RESULTS: The different proportions of the repeating unit types led to the formation of PA with melting temperatures ranging from 115°C to 185°C. The structural characterization of these samples by MALDI-TOF-MS revealed a collection of different ion distributions with different sequences of repeating units (AA, BB; AB/AA, BB and AB) in different proportions according to the mixture of monomers used in the synthesis. The relative intensities of these ion distributions were related to sample complexity and structure. They were correlated to DSC and X-ray results, to explain the observed physical properties. CONCLUSIONS: The structural information obtained by MALDI-TOF-MS provided a better understanding of the variation of the PA melting temperature and established a structure-properties relationship. This work will allow future PA designs to be monitored.

Mechanistic study of maleic anhydride grafting onto fatty double bonds using mass spectrometry.

RATIONALE: The grafting of maleic anhydride onto fatty C=C double bonds is a well-known and used method to functionalize triglyceride molecules. Nevertheless, grafted products are not actually structurally well defined. In this work, the thermal grafting of maleic anhydride onto (un)saturated fatty acid esters without the use of an initiator was characterized in order to determine the nature of the products formed during this reaction. METHODS: Complementary spectrometric techniques, ESI-MS(n) (ion-trap mass spectrometer), IMS-MS(n) (Q-IMS-TOFMS) and GC/MS, were used to identify the grafted products which were prepared using either ethyl oleate (EtO) or methyl linoleate (MeL) as model molecules and maleic anhydride (MA). Lithiated adducts were investigated since they yield useful structural information when subjected to collision-induced dissociation (CID) in tandem mass spectrometry. RESULTS: A high number of products are formed during MA grafting and various reaction types could occur. Radical addition of maleic anhydride followed by combination or elimination reactions led to succinic and maleic anhydride grafting, respectively. The addition occurred with or without double-bond shift; the resulting derivatives showed succinic and maleic anhydride branching in the α-position relative to the double bond or onto the carbon atom of the initial double bond. Some structures obtained by radical addition and combination were also consistent with the Alder ene functionalization reaction. The Diels-Alder addition between di-unsaturated fatty acid chains and maleic anhydride could yield cyclic forms of MA-grafted derivatives. CONCLUSIONS: We have shown that ESI-MS(n) and IMS-MS(n) allow the identification of grafted products providing relevant structural information concerning isomers. These methods permit the rapid and direct analyses of 'crude reaction mixtures'.

Solvent-based and solvent-free characterization of low solubility and low molecular weight polyamides by mass spectrometry: a complementary approach.

RATIONALE: Polyamides (PA) belong to the most used classes of polymers because of their attractive chemical and mechanical properties. In order to monitor original PA design, it is essential to develop analytical methods for the characterization of these compounds that are mostly insoluble in usual solvents. METHODS: A low molecular weight polyamide (PA11), synthesized with a chain limiter, has been used as a model compound and characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). In the solvent-based approach, specific solvents for PA, i.e. trifluoroacetic acid (TFA) and hexafluoroisopropanol (HFIP), were tested. Solvent-based sample preparation methods, dried-droplet and thin layer, were optimized through the choice of matrix and salt. Solvent-based (thin layer) and solvent-free methods were then compared for this low solubility polymer. Ultra-high-performance liquid chromatography/electrospray ionization (UHPLC/ESI)-TOF-MS analyses were then used to confirm elemental compositions through accurate mass measurement. RESULTS: Sodium iodide (NaI) and 2,5-dihydroxybenzoic acid (2,5-DHB) are, respectively, the best cationizing agent and matrix. The dried-droplet sample preparation method led to inhomogeneous deposits, but the thin-layer method could overcome this problem. Moreover, the solvent-free approach was the easiest and safest sample preparation method giving equivalent results to solvent-based methods. Linear as well as cyclic oligomers were observed. Although the PA molecular weights obtained by MALDI-TOF-MS were lower than those obtained by (1)H NMR and acido-basic titration, this technique allowed us to determine the presence of cyclic and linear species, not differentiated by the other techniques. TFA was shown to induce modification of linear oligomers that permitted cyclic and linear oligomers to be clearly highlighted in spectra. CONCLUSIONS: Optimal sample preparation conditions were determined for the MALDI-TOF-MS analysis of PA11, a model of polyamide analogues. The advantages of the solvent-free and solvent-based approaches were shown. Molecular weight determination using MALDI was discussed.

Novel Ionic Conducting Composite Membrane Based on Polymerizable Ionic Liquids.

In this work, the design and characterization of new supported ionic liquid membranes, as medium-temperature polymer electrolyte membranes for fuel-cell application, are described. These membranes were elaborated by the impregnation of porous polyimide Matrimid® with different synthesized protic ionic liquids containing polymerizable vinyl, allyl, or methacrylate groups. The ionic liquid polymerization was optimized in terms of the nature of the used (photo)initiator, its quantity, and reaction duration. The mechanical and thermal properties, as well as the proton conductivities of the supported ionic liquid membranes were analyzed in dynamic and static modes, as a function of the chemical structure of the protic ionic liquid. The obtained membranes were found to be flexible with Young's modulus and elongation at break values were equal to 1371 MPa and 271%, respectively. Besides, these membranes exhibited high thermal stability with initial decomposition temperatures > 300 °C. In addition, the resulting supported membranes possessed good proton conductivity over a wide temperature range (from 30 to 150 °C). For example, the three-component Matrimid®/vinylimidazolium/polyvinylimidazolium trifluoromethane sulfonate membrane showed the highest proton conductivity-~5 × 10-2 mS/cm and ~0.1 mS/cm at 100 °C and 150 °C, respectively. This result makes the obtained membranes attractive for medium-temperature fuel-cell application.

Contribution of two approaches using electrospray ionization with multi-stage mass spectrometry for the characterization of linseed oil.

A detailed characterization of triacylglycerols (TAGs) present in linseed oil samples from a local producer was performed using electrospray ionization and two mass spectrometric approaches; direct infusion multi-stage mass spectrometry (MS(n)) experiments and liquid chromatography/tandem mass spectrometry (LC/MS/MS) using non-aqueous reversed-phase chromatographic conditions. The combination of both approaches permitted the identification of 26 TAGs. Comparison of the two analytical approaches showed that discrimination of regioisomers was achieved from MS3 data while other isobaric species were separated and identified by LC/MS/MS analysis. The results we obtained were also compared with those previously reported. The TAG composition of the studied linseed oil is qualitatively identical to that of linseed oils from various sources in Europe, Canada, Argentina or India. However, a few differences were observed with regard to the proportions of some TAGs; these can be explained by variations in the culture conditions, climate, and variety of the seeds.

Photocrosslinking of a novel alpha,omega-unsaturated copolyamide: mass spectrometric study on model compounds with benzophenone as photoinitiator.

The aim of this work was to understand the reactions involved in the photocrosslinking processes of a alpha,omega-unsaturated copolyamide foreseen as a new UV-curable powder coating. The crosslinking reaction was photoinitiated with benzophenone. In this paper, the photochemical reaction between benzophenone and several model compounds was investigated. The model compounds contained functional groups which could be present in copolyamide. The products resulting from UV curing were identified using a combination of high-resolution mass spectrometry and MS(n) experiments. The characterization of the products allowed localization of the hydrogen abstraction by the type II photoinitiator during UV curing and, consequently, the determination of the reactive sites of the unsaturated polyamide chain which were involved in the photochemical reaction.

Tandem mass spectrometry of low solubility polyamides.

The structural characterization of polyamides (PA) was achieved by tandem mass spectrometry (MS/MS) with a laser induced dissociation (LID) strategy. Because of interferences for precursor ions selection, two chemical modifications of the polymer end groups were proposed as derivatization strategies. The first approach, based on the addition of a trifluoroacetic acid (TFA) molecule, yields principally to complementary bn and yn product ions. This fragmentation types, analogous to those obtained with peptides or other PA, give only poor characterization of polymer end-groups [1]. A second approach, based on the addition of a basic diethylamine (DEA), permits to fix the charge and favorably direct the fragmentation. In this case, bn ions were not observed. The full characterization of ω end group structure was obtained, in addition to the expected yn and consecutive fragment ions.