Added Value of Cone-Beam Computed Tomography for Detecting Hepatocellular Carcinomas and Feeding Arteries during Transcatheter Arterial Chemoembolization Focusing on Radiation Exposure.

Background and Objectives: This study aimed to evaluate the added value of cone-beam computed tomography (CBCT) for detecting hepatocellular carcinomas (HCC) and feeding arteries during transcatheter arterial chemoembolization (TACE). Material and methods: Seventy-six patients underwent TACE and CBCT. We subcategorized patients into groups I (61 patients: possible superselection of tumor/feeding arteries) and II (15 patients: limited superselection of tumor/feeding arteries). We evaluated fluoroscopy time and radiation dose during TACE. Two blinded radiologists independently performed an interval reading based on digital subtraction angiography (DSA) imaging only and DSA combined with CBCT in group I. Result: The mean total fluoroscopy time was 1456.3 ± 605.6 s. The mean dose-area product (DAP), mean DAP of CBCT, and mean ratio of DAP of CBCT to total DAP was 137.1 ± 69.2 Gy cm2, 18.3 ± 7.1 Gy cm2, and 13.3%, respectively. The sensitivity for detecting HCC increased after the additional CBCT reading, from 69.6% to 97.3% and 69.6% to 96.4% for readers 1 and 2, respectively. The sensitivity for detecting feeding arteries increased from 60.3% to 96.6% and 63.8% to 97.4% for readers 1 and 2, respectively. Conclusions: CBCT can increase sensitivity for detecting HCCs and feeding arteries without significantly increasing the radiation exposure.

Comparison of push-out bond strength of fiber-reinforced composite resin posts according to cement thickness.

STATEMENT OF PROBLEM: Post space size and cement thickness can differ because of variations in root canal morphology, such as an oval shape, and because the entire canal space cannot be included in the post space preparation. As a result, increased cement thickness around the post may affect the bond strength between the post and the dentin. PURPOSE: The purpose of this in vitro study was to evaluate the push-out bond strength of fiber-reinforced composite resin posts to root dentin with cement layers of varying thickness. MATERIAL AND METHODS: Thirty human premolars were endodontically treated and restored with fiber-reinforced composite resin posts. Post space was prepared using a drill with a 1.5-mm diameter and diameters of 1.25 mm (small [S] group), 1.375 mm (medium [M] group), and 1.5 mm (large [L] group) were cemented. The specimens were sectioned horizontally into 1-mm-thick slices, and the push-out bond strengths of the apical and coronal fragments were evaluated. Bond strength was compared using analysis of variance and 2-sample t tests (α=.05). RESULTS: No significant differences were found in the debonding force and push-out bond strength among fiber-reinforced composite posts of different sizes (P>.05). The mean debonding force and standard deviation of the posts were 25.05 ±9.52 N for the S group, 28.17 ±11.38 N for the M group, and 33.78 ±12.47 N for the L group. The corresponding push-out bond strength values were 3.11 ±1.54 MPa, 3.39 ±1.4 MPa, and 4.15 ±1.75 MPa. The differences in debonding force between the apical (26.43 ±10.72 N) and coronal (31.57 ±12.03 N) areas were not significant (P>.05). However, the differences in push-out bond strength between the apical (4.27 ±1.73 MPa) and coronal areas (2.83 ±1.08 MPa) were significant (P<.05). CONCLUSIONS: The widening of post spaces and, consequently, the increased cement thickness do not significantly affect the bond strength of fiber-reinforced composite resin posts to root dentin.

Catalytic Decomposition of Energetic Liquid Solution Over Various Types of Hexaaluminate Catalysts.

A hexaaluminate support was prepared by a co-precipitation method, and a metal (Cu, Pt, or Ir) was impregnated on the support to prepare a powdered catalyst. After that, organic and inorganic binders were added to the powdery catalyst and then pellets were formed. The so-formed catalysts were heat-treated at 1200°C, and their physicochemical properties were analyzed by N2-adsorption, X-ray diffraction (XRD), X-ray fluorenscence (XRF), and scanning electron microscopy (SEM). The decomposition activity of the catalysts on an ammonium dinitramide (ADN)-based liquid propellant was evaluated repeatedly, and the effects of catalyst composition and morphology on low temperature decomposition activity and durability were investigated. It was confirmed that the Cu-hexa-pellet, Pt-hexa-pellet, and Ir-hexa-pellet catalysts could be recovered and reused as a catalyst for decomposition of an ADN-based liquid monopropellant. The initial activity and the thermal stability of the Cu-hexa-pellet catalyst for the decomposition of ADN-based liquid monopropellants were better than for the other catalysts. The better activity of the Cu-hexa-pellet catalyst seems to be because the dispersion of the copper was higher than the metal dispersion in the other two catalysts.

Decomposition of Ionic Liquid Solution Over CuIr-Hexaaluminate Catalysts.

The objective of this study is to elucidate the catalytic performance of hexaaluminate catalysts incorporating Cu and Ir simultaneously during the decomposition of an ammonium dinitramide (ADN)-based liquid propellant. Pellet-type catalysts were prepared and their chemico-physical properties were characterized by N2 adsorption, XRD, and XRF. It was confirmed that Cu and Ir atoms are well incorporated inside the hexaaluminate matrix of the Cu(x)Ir(10-x)-hexaaluminate catalysts and the content of Ir incorporated into hexaaluminte matrix was in the range of 2.5-8.2 wt%. The Cu(7)Ir(3)-hexaaluminate catalyst showed excellent activity in decomposition of ADN-based liquid monopropellant. The activity of the Cu(7)Ir(3)-hexaaluminate catalyst was much higher than that of the Cu(7)Ir(3)/hexaaluminate-imp catalyst prepared by impregnation of Cu and Ir onto the hexaaluminate pellet surface. This is attributed to the Cu and Ir being well incorporated in the hexaaluminate matrix and the dispersion of the Cu and Ir being greater in the Cu(7)Ir(3)-hexaaluminate than in the Cu(7)Ir(3)/hexaaluminate-imp.

The Effect of Various Types of Mechanical and Chemical Preconditioning on the Shear Bond Strength of Orthodontic Brackets on Zirconia Restorations.

The purpose of this study was to investigate the combined effect of mechanical and chemical treatments on the shear bond strength (SBS) of metal orthodontic brackets on zirconia restoration. The zirconia specimens were randomly divided into 12 groups (n = 10) according to three factors: AL (Al2O3) and CO (CoJet™) by sandblasting material; SIL (silane), ZPP (Zirconia Prime Plus), and SBU (Single Bond Universal) by primer; and N (not thermocycled) and T (thermocycled). The specimens were evaluated for shear bond strength, and the fractured surfaces were observed using a stereomicroscope. Scanning electron microscopy images were also obtained. CO-SBU combination had the highest bond strength after thermocycling (26.2 MPa). CO-SIL showed significantly higher SBS than AL-SIL (p < 0.05). CO-ZPP resulted in lower bond strength than AL-ZPP before thermocycling, but the SBS increased after thermocycling (p > 0.05). Modified Adhesive Remnant Index (ARI) scoring and SEM figures were consistent with the results of the surface treatments. In conclusion, CO-SBU, which combines the effect of increased surface area and chemical bonding with both 10-MDP and silane, showed the highest SBS. Sandblasting with either material improved the mechanical bonding by increasing the surface area, and all primers showed clinically acceptable increase of shear bond strength for orthodontic treatment.

Effects of prestretching on force degradation of synthetic elastomeric chains.

INTRODUCTION: The purpose of this study was to evaluate the effects of prestretching on time-dependant force decay of synthetic elastomeric chains. METHODS: Five-unit (12.5 mm) and 6-unit (15.5 mm) modules (Generation II, Ormco, Glendora, Calif) were prestretched 100% for 1 hour (n = 12), 24 hours (n = 12), 2 weeks (n = 12), and 4 weeks (n = 12) in 37 degrees C distilled water. The prestretched and unprestretched (control) modules were then stretched to 30 mm in 37 degrees C water, and their forces were measured at 0 hour, 1 hour, 24 hours, and weekly for 4 weeks with a digital force gauge. RESULTS: The prestretched 5- and 6-unit modules yielded significantly lower initial force than the controls. All 5- and 6-unit prestretched and control groups showed substantial force decay during the first hour. However, at 1 hour, similar remaining forces were found in the 5-unit prestretched and control groups (P > .05), and small differences were seen in the 6-unit groups. The rates and patterns of force decay from 1 hour to 4 weeks were quite similar between the control and the prestretched modules of both the 5- and 6-unit groups. CONCLUSIONS: The effects of prestretching on force decay of elastomeric chains were noted mainly in the first hour. Thus, the clinical value of prestretching a synthetic elastomeric chain is questionable.