Ground Salicornia herbacea Powder Suppresses AOM/DSS-induced Colon Cancer by Inhibiting Wnt/ß-catenin Signaling and Nrf2.

PURPOSE: This study aims to evaluate the effects of prebiotics and probiotics on colorectal cancer (CRC) progression in an AOM/DSS-induced mouse model. METHODS: In AOM/DSS-induced mouse model, treatment groups received either S. herbacea as a prebiotic (PRE) or in combination with Lactobacillus plantarum as a probiotic (PRO). PCNA, Ki-67, ß-catenin, c-Myc, and Nrf2 were evaluated using immunohistochemistry (IHC). The impact on polyp formation and progression was assessed by categorizing polyps according to their size. RESULTS: Both PRE and PRO treatments resulted in a significant reduction in large polyp formation when compared to AOM/DSS induced control group. IHC analyses demonstrated reduced biomarker expression for cell proliferation in PRE and PRO groups, specifically showing decreased staining for PCNA, Ki-67, ß-catenin, and c-Myc, indicating downregulation of Wnt signaling and suppressed cell proliferation. Reduced Nrf2 expression highlights the impact of treatments interfering with cancer cell defenses. Notably, there were no significant differences in the outcomes between PRE and PRO groups, suggesting that prebiotics show anticancer effects. CONCLUSION: The study suggests that S. herbacea, a prebiotic, effectively suppresses CRC progression, with limited additional benefits from combining with probiotics. These findings underscore the therapeutic potential of prebiotics in CRC.

Autophagosome-lysosome fusion is facilitated by plectin-stabilized actin and keratin 8 during macroautophagic process.

Autophagy is a lysosome-mediated degradative process that removes damaged proteins and organelles, during which autophagosome-lysosome fusion is a key step of the autophagic flux. Based on our observation that intermediate cytofilament keratin 8 (KRT8) enhances autophagic clearance in cells under oxidative stress condition, we investigated whether KRT8 supports the cytoplasmic architectural networks to facilitate the vesicular fusion entailing trafficking onto filamentous tracks. We found that KRT8 interacts with actin filaments via the cytolinker, plectin (PLEC) during trafficking of autophagosome. When PLEC was knocked down or KRT8 structure was collapsed by phosphorylation, autophagosome-lysosome fusion was attenuated. Inhibition of actin polymerization resulted in accumulation of autophagosomes owing to a decrease in autophagosome and lysosome fusion. Furthermore, myosin motor protein was found to be responsible for vesicular trafficking along the actin filaments to entail autolysosome formation. Thus, the autophagosome-lysosome fusion is aided by PLEC-stabilized actin filaments as well as intermediate cytofilament KRT8 that supports the structural integrity of actin filaments during macroautophagic process under oxidative stress condition.

Functional Graphene Nanomaterials-Based Hybrid Scaffolds for Osteogenesis and Chondrogenesis.

With the emerging trends and recent advances in nanotechnology, it has become increasingly possible to overcome current hurdles for bone and cartilage regeneration. Among the wide type of nanomaterials, graphene (G) and its derivatives (graphene-based materials, GBMs) have been highlighted due to the specific physicochemical and biological properties. In this review, we present the recent development of GBM-based scaffolds for bone and cartilage engineering, focusing on the formulation/shape/size-dependent characteristics, types of scaffold and modification, biocompatibility, bioactivity and underlying mechanism, drawback and prospect of each study. From the findings described herein, mechanical property, biocompatibility, osteogenic and chondrogenic property of GBM-based scaffolds could be significantly enhanced through various scaffold fabrication methods and conjugation with polymers/nanomaterials/drugs. In conclusion, the results presented in this review support the promising prospect of using GBM-based scaffolds for improved bone and cartilage tissue engineering. Although GBM-based scaffolds have some limitations to be overcome by future research, we expect further developments to provide innovative results and improve their clinical potential for bone and cartilage regeneration.

Role of Graphene Family Nanomaterials in Skin Wound Healing and Regeneration.

Owing to astonishing properties such as the large surface area to volume ratio, mechanical stability, antimicrobial property, and collagen crosslinking, graphene family nanomaterials (GFNs) have been widely used in various biomedical applications including tissue regeneration. Many review literatures are available to compile the role of GFNs in cardiac, bone, and neuronal tissue regeneration. However, the contribution of GFNs in skin wound healing and tissue regeneration was not yet discussed. In the present review, we have highlighted the properties of GFNs and their application in skin wound healing. In addition, we have included challenges and future directions of GFNs in skin tissue regeneration in the portion of conclusion and perspectives.

A Validated Grading Scale for Downturned Oral Commisure in Asian Faces.

BACKGROUND: Downturned oral commissures develop gradually with aging. Tools have been developed to evaluate the marionette line or the lower face. However, there is no validated and reproducible tool to evaluate the progress after oral commissure treatment in clinical practice. OBJECTIVE: The authors aimed to develop a scoring system to evaluate therapeutic interventions for downturned oral commissures and to verify its reliability, reproducibility, and clinical significance. METHODS AND MATERIALS: In the Scale Development Group, the Delphi method was used to establish a 5-graded scoring system to evaluate oral commissure position. The scoring system was applied to 50 participants. The authors recorded and compared the intrarater agreement, interrater agreement, and significance of the grade-dependent scale. RESULTS: Delphi analysis of the scoring system verified the grade description adequacy. Intrarater agreement showed almost perfect agreement, and the intraclass correlation coefficient of the interrater agreement had a significantly higher agreement rate. The differences between the clinical grades were significant. CONCLUSION: The Hugel Downturned Oral Commissure Scale is precise, reproducible, and reflective of the clinical differences for downturned oral commissure. Its novelty lies in the use of specific angles and ratio. This scale has clinical trial potential owing to its standardized and quantitative assessment.

Silica Nanoparticles.

Silica consists of one silicon atom and two oxygen atoms (SiO2) and is commonly used in various aspects of daily life. For example, it has been used as glass, insulator, and so on. Nowadays, silica is used as core reagents for fabricating and encapsulating nanoparticles (NPs). In this chapter, the usage of silica in nanotechnology is described. Synthesis and surface modification of silica nanoparticles (SiNPs), including via the Stöber method, reverse microemulsion method, and modified sol-gel method, are illustrated. Then, various NPs with silica encapsulation are explained. At last, the biological applications of those mentioned NPs are described.

Luminescent Nanomaterials (I).

From molecular probes, also known as fluorophores (typically emitting a longer wavelength than the absorbing wavelength), to inorganic nanoparticles, various light-emitting materials have been actively studied and developed for various applications in life science owing to their superior imaging and sensing ability. Especially after the breakthrough development of quantum dots (QDs), studies have pursued the development of the optical properties and biological applications of luminescent inorganic nanoparticles such as upconversion nanoparticles (UCNPs), metal nanoclusters, carbon dots, and so on. In this review, we first provide a brief explanation about the theoretical background and traditional concepts of molecular fluorophores. Then, currently developed luminescent nanoparticles are described as sensing and imaging platforms from general aspects to technical views.

Luminescent Nanomaterials (II).

In this review, we focus on sensing techniques and biological applications of various luminescent nanoparticles including quantum dot (QD), up-conversion nanoparticles (UCNPs) following the previous chapter. Fluorescent phenomena can be regulated or shifted by interaction between biological targets and luminescence probes depending on their distance, which is so-called FÓ§rster resonance energy transfer (FRET). QD-based FRET technique, which has been widely applied as a bioanalytical tool, is described. We discuss time-resolved fluorescence (TRF) imaging and flow cytometry technique, using photoluminescent nanoparticles with unique properties for effectively improving selectivity and sensitivity. Based on these techniques, bioanalytical and biomedical application, bioimaging with QD, UCNPs, and Euripium-activated luminescent nanoprobes are covered. Combination of optical property of these luminescent nanoparticles with special functions such as drug delivery, photothermal therapy (PTT), and photodynamic therapy (PDT) is also described.

Optical and Electron Microscopy for Analysis of Nanomaterials.

Not only is fabrication important for research in materials science, but also materials characterization and analysis. Special microscopes capable of ultra-high magnification are more essential for observing and analyzing nanoparticles than for macro-size particles. Recently, electron microscopy (EM) and scanning probe microscopy (SPM) are commonly used for observing and analyzing nanoparticles. In this chapter, the basic principles of various techniques in optical and electron microscopy are described and classified. In particular, techniques such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM) are explained.

Carbon Nanomaterials for Biomedical Application.

The use of carbon-based nanomaterials (CNs) with outstanding properties has been rising in many scientific and industrial application fields. These CNs represent a tunable alternative for applications with biomolecules, which allow interactions in either covalent or noncovalent way. Diverse carbon-derived nanomaterial family exhibits unique features and has been widely exploited in various biomedical applications, including biosensing, diagnosis, cancer therapy, drug delivery, and tissue engineering. In this chapter, we aim to present an overview of CNs with a particular interest in intrinsic structural, electronic, and chemical properties. In particular, the detailed properties and features of CNs and its derivatives, including carbon nanotube (CNT), graphene, graphene oxide (GO), and reduced GO (rGO) are summarized. The interesting biomedical applications are also reviewed in order to offer an overview of the possible fields for scientific and industrial applications of CNs.

Introduction of Nanobiotechnology.

Nano is a fine metric unit which means "one billionth." Nanotechnology is attracting attention as a technological basis to lead the fourth industry. By utilizing synergistic properties obtained from controlling the structure or arrangement of materials at the nanoscale, nanotechnology has evolved rapidly over the past half century and is active in a variety of fields such as materials, pharmaceuticals, and biology. This chapter briefly describes the concept and features of nanotechnology, as well as the preparation, analysis, characterization, and application of nanomaterials. Also, the prospects for nanotechnology along with the nanotoxicity are described.

Magnetic Nanoparticles.

Magnetic nanoparticles have been used in various fields such as data storage, biomedicine, or bioimaging with their unique magnetic property. With their low toxicity, the importance of magnetic nanoparticles keeps increasing especially in biological field. In this chapter, content suitable for scientific inquirers or undergraduates to acquire basic knowledge about nanotechnology is introduced and then recent research trends in nanotechnology are covered.

A Single-Center, Randomized, Double-Blind Clinical Trial to Compare the Efficacy and Safety of a New Monophasic Hyaluronic Acid Filler and Biphasic Filler in Correcting Nasolabial Fold.

BACKGROUND: Hyaluronic acid (HA) fillers have been widely used in humans since 1958 because of their biomedical safety. Restylane® was introduced in the1990s as a favorable temporary filler option for facial augmentation. Subsequently, many new HA filler products, including the Sardenyashape®, have been introduced, but comparative studies of these products are limited. Here, we compared tolerability (wrinkle severity rating scale, WSRS), pain (visual analog scale, VAS score), satisfaction (global esthetic improvement scale, GAIS), and safety of a new monophasic HA (MHA) filler (Sardenyashape®) containing lidocaine, used to correct nasolabial folds (NLFs), with those of biphasic HA (BHA) filler (Restylane LYFT®) containing lidocaine. METHODS: We enrolled 96 participants with visible NLFs in this randomized, double-blind, single-center clinical study. Participants were injected with a new MHA filler in one NLF and a BHA filler and were reassessed for cosmetic changes at 8 and 24 weeks. Wrinkle severity was assessed using the 5-point WSRS. RESULTS: At week 24, the mean improvement in WSRS compared to baseline was 1.92 ± 0.75 and 2.24 ± 0.66 for MHA and BHA fillers, respectively, and corresponding average pain values using the VAS score 30 min after the procedure were 0.04 ± 0.25 and 0.02 ± 0.15, respectively, showing no significant difference. Average GAIS values 8 weeks after the procedure with MHA and BHA fillers were 1.89 ± 0.77 and 1.40 ± 0.82, respectively (p < 0.001). Both fillers were well tolerated, with mild adverse reactions. CONCLUSION: The evaluation of the effect of Sardenyashape® with lidocaine on NLF in this study proved its effectiveness and safety for use in correcting NLF. LEVEL OF EVIDENCE II: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Extracellular Vesicles From a Three-Dimensional Culture of Perivascular Cells Accelerate Skin Wound Healing in a Rat.

BACKGROUND: Soluble proteins and extracellular vesicles (EVs) are crucial wound repair mediators in cell-based therapy. Previous studies reported that EVs of perivascular cells stimulated migration and proliferation of cell types involved in the dermatological wound healing process. However, these studies only show effects of EVs from perivascular cells (PVCs) for in vitro models. METHODS: EVs were collected from 3D-cultured PVC (PVC-3D-EV) and compared with EVs from 2D-culture PVC (PVC-2D-EV) to investigate effects on wound contraction, angiogenesis, activation of myofibroblast, and collagen deposition. RESULTS: PVC-3D-EV was significantly improved in terms of wound contraction compared with PVC-2D-EV and the control. Activation of myofibroblast and collagen deposition in a rat skin wound model was significantly stimulated by PVC-3D-EV. In addition, angiogenesis and vascular endothelial growth factor expression were also highly stimulated by PVC-3D-EV. These results suggest that PVC-3D-EV was regulated in granulation tissue formation, angiogenesis, and wound contraction in healing of a rat skin wound. These results indicate a pivotal role of PVC-3D-EV in wound healing through multiple mechanisms. CONCLUSIONS: 3D-culture using a polystyrene scaffold is demonstrated to be a better system for providing better physiological conditions than the 2D-culture system, and EVs from 3D-cultured PVC could be a promising option for healing skin wound. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Development of Two-Dimensional Nanomaterials Based Electrochemical Biosensors on Enhancing the Analysis of Food Toxicants.

In recent times, food safety has become a topic of debate as the foodborne diseases triggered by chemical and biological contaminants affect human health and the food industry's profits. Though conventional analytical instrumentation-based food sensors are available, the consumers did not appreciate them because of the drawbacks of complexity, greater number of analysis steps, expensive enzymes, and lack of portability. Hence, designing easy-to-use tests for the rapid analysis of food contaminants has become essential in the food industry. Under this context, electrochemical biosensors have received attention among researchers as they bear the advantages of operational simplicity, portability, stability, easy miniaturization, and low cost. Two-dimensional (2D) nanomaterials have a larger surface area to volume compared to other dimensional nanomaterials. Hence, researchers nowadays are inclined to develop 2D nanomaterials-based electrochemical biosensors to significantly improve the sensor's sensitivity, selectivity, and reproducibility while measuring the food toxicants. In the present review, we compile the contribution of 2D nanomaterials in electrochemical biosensors to test the food toxicants and discuss the future directions in the field. Further, we describe the types of food toxicity, methodologies quantifying food analytes, how the electrochemical food sensor works, and the general biomedical properties of 2D nanomaterials.

Galectin-1 from conditioned medium of three-dimensional culture of adipose-derived stem cells accelerates migration and proliferation of human keratinocytes and fibroblasts.

Keratinocytes and fibroblasts cells play important roles in the skin-wound healing process and are the cell types activated by trauma. Activated cells participate in epithelialization, granulation, scar tissue formation, wound remodeling, and angiogenesis via a series of cellular activities including migration and proliferation. Previous studies reported that the conditioned medium (CM) of adipose-derived stem cells (ADSCs) stimulated the migration and proliferation of cell types involved in the skin wound healing process; however, these studies only show ADSC-CM effects that were obtained using 2-dimensional (2D) culture. Recently, 3-dimensional (3D) culture has been considered as a more physiologically appropriate system than 2D culture for ADSC cultures; therefore, ADSC-CM was collected from 3D culture (ADSC-CM-3D) and compared with ADSC-CM from 2D culture (ADSC-CM-2D) to investigate the effects on the migration and proliferation of human keratinocytes (HaCaTs) and fibroblasts. The migrations of the HaCaT cells and fibroblasts were significantly higher with ADSC-CM-3D compared with the 2D culture; similarly, the proliferation of HaCaT cells was also highly stimulated by ADSC-CM-3D. Proteomic analyses of the ADSC-CM revealed that collagens and actins were highly expressed in the 3D-culture system. Chitinase 3-like 1 (CHI3L1), tissue inhibitor of metalloproteinases (TIMP), and galectin-1 were specifically expressed only in ADSC-CM-3D. Especially, through antibody neutralization, galectin-1 in ADSC-CM-3D was found to be an important factor for the migration of human keratinocytes. Therefore, these results suggest that ADSC-CM-3D was more effective in the wound healing than ADSC-CM-2D, and galectin-1 in ADSC-CM-3D was could be a promising option for skin-wound healing. Furthermore, the differential expressions of several ADSC-CM proteins between the 2D- and 3D-culture systems may be used as basic information for the development of efficient wound-healing strategies.

A Prospective Observational Study of the Effectiveness and Safety of Botulinum Toxin in the Horizontal Neck Lines.

BACKGROUND: Botulinum toxin is used extensively, and its use for aesthetic indications in the lower face and neck is now becoming increasingly popular. It is the ideal alternative to surgical procedures for patients who are too young for facelift surgery or who are unwilling to take recuperation time. We review current approaches to BTX A treatment for horizontal neck lines. METHODS: Subjects were 20 women with an average age of 43 with mild to moderate horizontal neck lines but have had no treatment by BTX A for the past 3 months. Injections are performed at points 1-1.5 cm apart along the horizontal lines with 1-2 U in each injection site, for a total of 15-30 U. Patients were followed up 3 and 8 days after treatment and then every 4 weeks after initial treatment for 16 weeks. RESULTS: Except day 3 in the first neck line, the mean resulting from evaluation by the actual physician who performed the injection and two blinded physicians has statistical significance as shown by the maximum results at 8 weeks after injection. However, the patient improvement rate and satisfaction level did not exceed 50%. Adverse reactions were mild and transitory. CONCLUSIONS: The overall results of applying BTX A are excellent, and the satisfaction level of treated patients is high to a certain extent. Moreover, smoothening of the neck skin was observed due to the intradermal effect. It is also a safe and effective therapeutic modality for any patient desiring rejuvenation of his or her neck, but who at the same time does not desire any recuperation time or is unwilling to undertake the potential risks associated with surgical procedures. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Novel Neohesperidin Dihydrochalcone Analogue Inhibits Adipogenic Differentiation of Human Adipose-Derived Stem Cells through the Nrf2 Pathway.

Obesity, characterized by excess lipid accumulation, has emerged as a leading public health problem. Excessive, adipocyte-induced lipid accumulation raises the risk of metabolic disorders. Adipose-derived stem cells (ASCs) are mesenchymal stem cells (MSCs) that can be obtained from abundant adipose tissue. High fat mass could be caused by an increase in the size (hypertrophy) and number (hyperplasia) of adipocytes. Reactive oxygen species (ROS) are involved in the adipogenic differentiation of human adipose-derived stem cells (hASCs). Lowering the level of ROS is important to blocking or retarding the adipogenic differentiation of hASCs. Nuclear factor erythroid 2-related factor-2 (Nrf2) is a transcription factor that mediates various antioxidant enzymes and regulates cellular ROS levels. Neohesperidin dihydrochalcone (NHDC), widely used as artificial sweetener, has been shown to have significant free radical scavenging activity. In the present study, (E)-3-(4-chlorophenyl)-1-(2,4,6-trimethoxyphenyl)prop-2-en-1-one (CTP), a novel NHDC analogue, was synthesized and examined to determine whether it could inhibit adipogenic differentiation. The inhibition of adipogenic differentiation in hASCs was tested using NHDC and CTP. In the CTP group, reduced Oil Red O staining was observed compared with the differentiation group. CTP treatment also downregulated the expression of PPAR-γ and C/EBP-α, adipogenic differentiation markers in hASCs, compared to the adipogenic differentiation group. The expression of FAS and SREBP-1 decreased in the CTP group, along with the fluorescent intensity (amount) of ROS. Expression of the Nrf2 protein was slightly decreased in the differentiation group. Meanwhile, in both the NHDC and CTP groups, Nrf2 expression was restored to the level of the control group. Moreover, the expression of HO-1 and NQO-1 increased significantly in the CTP group. Taken together, these results suggest that CTP treatment suppresses the adipogenic differentiation of hASCs by decreasing intracellular ROS, possibly through activation of the Nrf2 cytoprotective pathway. Thus, the use of bioactive substances such as CTP, which activates Nrf2 to reduce the cellular level of ROS and inhibit the adipogenic differentiation of hASCs, could be a new strategy for overcoming obesity.

Comparison of the Efficacy and Safety of Aripiprazole Versus Bupropion Augmentation in Patients With Major Depressive Disorder Unresponsive to Selective Serotonin Reuptake Inhibitors: A Randomized, Prospective, Open-Label Study.

PURPOSE: The purpose of this study was to compare the efficacy and safety of aripiprazole versus bupropion augmentation in patients with major depressive disorder (MDD) unresponsive to selective serotonin reuptake inhibitors (SSRIs). METHODS: This is the first randomized, prospective, open-label, direct comparison study between aripiprazole and bupropion augmentation. Participants had at least moderately severe depressive symptoms after 4 weeks or more of SSRI treatment. A total of 103 patients were randomized to either aripiprazole (n = 56) or bupropion (n = 47) augmentation for 6 weeks. Concomitant use of psychotropic agents was prohibited. Montgomery Asberg Depression Rating Scale, 17-item Hamilton Depression Rating scale, Iowa Fatigue Scale, Drug-Induced Extrapyramidal Symptoms Scale, Psychotropic-Related Sexual Dysfunction Questionnaire scores were obtained at baseline and after 1, 2, 4, and 6 weeks of treatment. RESULTS: Overall, both treatments significantly improved depressive symptoms without causing serious adverse events. There were no significant differences in the Montgomery Asberg Depression Rating Scale, 17-item Hamilton Depression Rating scale, and Iowa Fatigue Scale scores, and response rates. However, significant differences in remission rates between the 2 groups were evident at week 6 (55.4% vs 34.0%, respectively; P = 0.031), favoring aripiprazole over bupropion. There were no significant differences in adverse sexual events, extrapyramidal symptoms, or akathisia between the 2 groups. CONCLUSIONS: The present study suggests that aripiprazole augmentation is at least comparable to bupropion augmentation in combination with SSRI in terms of efficacy and tolerability in patients with MDD. Both aripiprazole and bupropion could help reduce sexual dysfunction and fatigue in patients with MDD. Aripiprazole and bupropion may offer effective and safe augmentation strategies in patients with MDD who are unresponsive to SSRIs. Double-blinded trials are warranted to confirm the present findings.

Flavimarina flava sp. nov., isolated from Salicornia herbacea.

A Gram-stain-negative, motile-by-gliding, aerobic, non-spore-forming, rod-shaped and yellow-pigmented bacterium was isolated from Salicornia herbacea in the Yellow Sea and designated as strain MBLN091T. It belonged to the family Flavobacteriaceae. The 16S rRNA gene sequence of this isolated strain was similar to that of Flavimarina pacifica IDSW-73T with 94.8 % similarity, and with 92.3-92.8 % similarities to those of other closely related species of the genus Leeuwenhoekiella. The similarities of the RNA polymerase subunit B gene between this strain and F. pacifica KCTC 32466T and Leeuwenhoekiella marinoflava DSM 3653T were 80.5 and 80.2 %, respectively. Growth of strain MBLN091T was observed in the presence of 0.5‒15.0 % (w/v) NaCl at 4‒35 °C and pH 6.0-8.0, with optimal growth in the presence of 2.5‒5.0 % (w/v) NaCl at 20‒25 °C and pH 7.0. This isolate was able to hydrolyse gelatin. The only respiratory quinone was MK-6. The major polar lipids were phosphatidylethanolamine, an unidentified aminolipid and two unidentified lipids. Major fatty acids of the isolate were iso-C15 : 0, summed feature 3 (C16 : 1 ω7c and/or C16 : 1 ω6c), iso-C17 : 0 3-OH and iso-C15 : 1 G. The genomic DNA G+C content was 39.6 mol%. The physiological features were closely related to F. pacifica. Therefore, strain MBLN091T is considered to represent a novel species within the genus Flavimarina, for which the name Flavimarina flava sp. nov. is proposed. The type strain is MBLN091T (=KCTC 52527T=JCM 31731T).