Siblings with vitamin D-dependent rickets type 1A: Importance of genetic testing and a review of genotype-phenotype correlations.

Vitamin D-dependent rickets type 1A (VDDR1A) is a rare condition caused by biallelic pathogenic variants in CYP27B1, which encodes 25-hydroxyvitamin D3-1-α-hydroxylase. Inadequate activity of this enzyme results in deficient 1α-hydroxylation of inactive 25-hydroxyvitamin D to biologically active 1,25-dihydroxyvitamin D, with consequent adverse effects on calcium and phosphate metabolism. A female child was clinically diagnosed at 18 months old with hypophosphatemic rickets based on phenotype and biochemical testing, with neither parent affected. A subsequent affected male sibling led to the reconsideration of the diagnosis. Exome sequencing showed a homozygous CYP27B1 c.1040T>A (p.Ile347Asn) variant for both children. No variants were found in genes associated with hypophosphatemic rickets. A review of published cases of VDDR1A with homozygous CYP27B1 variants indicates variable clinical presentation, lack of genotype-phenotype correlation, and low serum phosphate at diagnosis in most cases. These findings emphasize the clinical importance of molecular testing as part of the diagnostic evaluation for cases of non-nutritional rickets.

Efficacy of therapeutic plasma exchange in reducing the incidence of recurrent pancreatitis related to familial chylomicronemia.

BACKGROUND: Familial chylomicronemia syndrome (FCS) is caused by a genetic defect in triglyceride (TG) metabolism that leads to severe hypertriglyceridemia, which in turn is associated with multiple morbidities and may cause severe pancreatitis that is both recurrent and progressive. Management of hypertriglyceridemia in FCS is challenging, as both dietary and medical interventions are often ineffective. Therapeutic plasma exchange (TPE) has been shown to rapidly decrease circulating levels of chylomicrons and TGs in patients presenting with acute hypertriglyceridemic-associated pancreatitis. Conversely, limited evidence exists to suggest that prophylactic use of TPE is effective at preventing recurrence of acute pancreatitis. CASE REPORT: Herein, we report our experience with the use of chronic, prophylactic TPE to reduce the incidence of recurrent acute pancreatitis in a patient with FCS.

Super-Resolution Microscopy Reveals Shape and Distribution of Dislocations in Single-Crystal Nanocomposites.

With their potential to offer new properties, single crystals containing nanoparticles provide an attractive class of nanocomposite materials. However, to fully profit from these, it is essential that we can characterise their 3D structures, identifying the locations of individual nanoparticles, and the defects present within the host crystals. Using calcite crystals containing quantum dots as a model system, we here use 3D stochastic optical reconstruction microscopy (STORM) to locate the positions of the nanoparticles within the host crystal. The nanoparticles are shown to preferentially associate with dislocations in a manner previously recognised for atomic impurities, rendering these defects visible by STORM. Our images also demonstrate that the types of dislocations formed at the crystal/substrate interface vary according to the nucleation face, and dislocation loops are observed that have entirely different geometries to classic misfit dislocations. This approach offers a rapid, easily accessed, and non-destructive method for visualising the dislocations present within crystals, and gives insight into the mechanisms by which additives become occluded within crystals.

The Effect of Additives on the Early Stages of Growth of Calcite Single Crystals.

As crystallization processes are often rapid, it can be difficult to monitor their growth mechanisms. In this study, we made use of the fact that crystallization proceeds more slowly in small volumes than in bulk solution to investigate the effects of the soluble additives Mg2+ and poly(styrene sulfonate) (PSS) on the early stages of growth of calcite crystals. Using a "Crystal Hotel" microfluidic device to provide well-defined, nanoliter volumes, we observed that calcite crystals form via an amorphous precursor phase. Surprisingly, the first calcite crystals formed are perfect rhombohedra, and the soluble additives have no influence on the morphology until the crystals reach sizes of 0.1-0.5 µm for Mg2+ and 1-2 µm for PSS. The crystals then continue to grow to develop morphologies characteristic of these additives. These results can be rationalized by considering additive binding to kink sites, which is consistent with crystal growth by a classical mechanism.

INSULIN-LIKE GROWTH FACTOR BINDING PROTEIN 1 PREDICTS INSULIN SENSITIVITY AND INSULIN AREA-UNDER-THE-CURVE IN OBESE, NONDIABETIC ADOLESCENTS.

OBJECTIVE: To compare fasting insulin-like growth factor binding protein 1 (IGFBP-1) to other fasting indices as a surrogate marker of insulin sensitivity and resistance calculated from a 3-hour oral glucose tolerance test (oGTT). METHODS: Fasting IGFBP-1 and oGTT were performed at 0 (n = 77), 52 (n = 54), and 100 (n = 38) weeks in a study investigating metformin treatment of obesity in adolescents. Insulin area-under-the-curve (IAUC) and the composite insulin sensitivity index (CISI) calculated from the oGTT were compared to fasting IGFBP-1, homeostasis model assessment-insulin resistance, and corrected insulin release at the glucose peak (CIRgp). RESULTS: IGFBP-1 and the ratio of IGFBP-1 to fasting insulin were significantly correlated with indices based on timed sampling, including IAUC, CISI, and CIRgp. In addition, a significant effect of IGFBP-1, but not IGFBP-1 to insulin at time zero, was observed for IAUC and CISI. CONCLUSION: Our results indicate that fasting IGFBP-1 may be a useful marker of insulin sensitivity and secretion.

Persistence of müllerian duct structures in a genetic male with distal monosomy 10q.

Persistent müllerian duct syndrome (PMD) with antimüllerian hormone (AMH) deficiency is usually associated with mutations or deletions of the AMH gene, although many cases have no identified gene association. We report on a genetic male with PMD and AMH deficiency associated with distal monosomy 10q. A term 3,230 g infant was born to a healthy 27-year-old. Fetal ultrasound had shown possible genital ambiguity. Postnatal exam showed a 0.5 cm phallus with basal meatus, normal scrotum with no palpable gonads, no vaginal orifice, and a rectal fistula with an imperforate anus. Voiding cystourethrogram with ultrasound, cystoscopy, and laparoscopy showed normal bladder, urethral orifice, distal vagina, cervix, and bilateral abdominal testis. At 24 hours of life, testosterone was within normal range with low AMH level. Chromosome microarray analysis showed 46, XY, del10(10q25.3q26.13) involving an 8.2 MB interstitial deletion. Whole exome sequencing identified a NOTCH2 variant (1p11.2). AMH sequencing revealed no abnormalities. Following multidisciplinary team and parent discussion, male gender was assigned. Testosterone treatment resulted in penile length of 1.5 cm. Bilateral orchiopexy and posterior sagittal anorectoplasty were performed at 11 months of age; rudimentary müllerian structures were identified. This observation suggests an association of 10qter elements with male differentiation including AMH expression and is similar to a patient with 46, XY, del(10q26.1) in which AMH levels were not reported. Regional candidate genes include FGFR2 (10q26.13). The possible contribution of a NOTCH2 variant cannot be excluded.

Selective Laser Direct Patterning of Silver Nanowire Percolation Network Transparent Conductor for Capacitive Touch Panel.

We introduce a facile method to enhance the functionality of a patterned metallic transparent conductor through selective laser ablation of metal nanowire percolation network. By scanning focused nanosecond pulsed laser on silver nanowire percolation network, silver nanowires are selectively ablated and patterned without using any conventional chemical etching or photolithography steps. Various arbitrary patterns of silver nanowire transparent conductors are readily created on the percolation network by changing various laser parameters such as repetition rate and power. The macroscopic optical and electrical properties of the percolation network transparent conductor can be easily tuned by changing the conductor pattern design via digital selective laser ablation. Further investigation on the silver nanowire based electrode line prepared by the ablation process substantiates that the general relation for a conducting thin film fails at a narrow width, which should be considered for the applications that requires a high resolution patterns. Finally, as a proof of concept, a capacitive touch sensor with diamond patterns has been demonstrated by selective laser ablation of metal nanowire percolation network.

Evaluating data quality for blended data using a data quality framework.

In 2020 the U.S. Federal Committee on Statistical Methodology (FCSM) released "A Framework for Data Quality", organized by 11 dimensions of data quality grouped among three domains of quality (utility, objectivity, integrity). This paper addresses the use of the FCSM Framework for data quality assessments of blended data. The FCSM Framework applies to all types of data, however best practices for implementation have not been documented. We applied the FCSM Framework for three health-research related case studies. For each case study, assessments of data quality dimensions were performed to identify threats to quality, possible mitigations of those threats, and trade-offs among them. From these assessments the authors concluded: 1) data quality assessments are more complex in practice than anticipated and expert guidance and documentation are important; 2) each dimension may not be equally important for different data uses; 3) data quality assessments can be subjective and having a quantitative tool could help explain the results, however, quantitative assessments may be closely tied to the intended use of the dataset; 4) there are common trade-offs and mitigations for some threats to quality among dimensions. This paper is one of the first to apply the FCSM Framework to specific use-cases and illustrates a process for similar data uses.

Dystrophic calcinosis: structural and morphological composition, and evaluation of ethylenediaminetetraacetic acid ('EDTA') for potential local treatment.

BACKGROUND: To perform a detailed morphological analysis of the inorganic portion of two different clinical presentations of calcium-based deposits retrieved from subjects with SSc and identify a chemical dissolution of these deposits suitable for clinical use. METHODS: Chemical analysis using Fourier Transform IR spectroscopy ('FTIR'), Raman microscopy, Powder X-Ray Diffraction ('PXRD'), and Transmission Electron Microscopy ('TEM') was undertaken of two distinct types of calcinosis deposits: paste and stone. Calcinosis sample titration with ethylenediaminetetraacetic acid ('EDTA') assessed the concentration at which the EDTA dissolved the calcinosis deposits in vitro. RESULTS: FTIR spectra of the samples displayed peaks characteristic of hydroxyapatite, where signals attributable to the phosphate and carbonate ions were all identified. Polymorph characterization using Raman spectra were identical to a hydroxyapatite reference while the PXRD and electron diffraction patterns conclusively identified the mineral present as hydroxyapatite. TEM analysis showed differences of morphology between the samples. Rounded particles from stone samples were up to a few micron in size, while needle-like crystals from paste samples reached up to 0.5 µm in length. Calcium phosphate deposits were effectively dissolved with 3% aqueous solutions of EDTA, in vitro. Complete dissolution of both types of deposit was achieved in approximately 30 min using a molar ratio of EDTA/HAp of ≈ 300. CONCLUSIONS: Stone and paste calcium-based deposits both comprise hydroxyapatite, but the constituent crystals vary in size and morphology. Hydroxyapatite is the only crystalline polymorph present in the SSc-related calcinosis deposits. Hydroxyapatite can be dissolved in vitro using a dosage of EDTA considered safe for clinical application. Further research is required to establish the optimal medium to develop the medical product, determine the protocol for clinical application, and to assess the effectiveness of EDTA for local treatment of dystrophic calcinosis.

Pressurized Back-Junction Doping via Spray-Coating Silver Nanowires Top Electrodes for Efficient Charge Collection in Bifacial Colloidal PbS Quantum Dot Solar Cells.

Colloidal PbS quantum-dot solar cells (QDSCs) have long suffered from inefficient charge collection near the back-junction due to the lack of p-doping strategy, rendering their bifacial photovoltaic applications unsuccessful. Here, we report highly efficient photocarrier collection in bifacial colloidal PbS QDSCs by exploiting spray-coated silver nanowires (AgNWs) top electrodes. During our spray-coating process, pressurized Ag diffusion occurred toward the active layer, which induced effective p-doping and deep-level passivation. By manipulating the spray pressure, optimum AgNWs' stacking morphology enabling an appropriate level of Ag diffusion could be achieved, leading to Jsc over 30 mA/cm2 from the conventional n-i-p structure upon light illumination to the film side. The morphological and electrical behaviors of AgNWs according to the spray pressure are comprehensively explained in relation to the device performance. Finally, 50 bifacial cells were fabricated over 49 cm2 sized glass substrate, demonstrating the large-area processability and functionality of the spray-coated AgNWs with the effective back-junction engineering.

Sn-Doped Zinc Oxide as an Electron Transporting Layer for Enhanced Performance in PbS Quantum Dot Solar Cells.

Colloidal PbS quantum dot solar cells (QDSCs) have been primarily demonstrated in n-i-p structures by incorporating a solution-processed ZnO electron transporting layer (ETL). Nevertheless, the inherent energy barrier for the electron extraction at the ZnO/PbS junction along with the defective nature significantly diminishes the performance of the PbS QDSCs. In this study, by employing Sn-doped ZnO (ZTO) ETL, we have tuned the conduction band offset at the junction from spike-type to cliff-type so that the electron extraction barrier can be eliminated and the overall photovoltaic parameters can be enhanced (open-circuit voltage of 0.7 V, fill factor over 70%, and efficiency of 11.3%) as compared with the counterpart with the undoped ZnO ETL. The X-ray photoelectron spectroscopy (XPS) analysis revealed a mitigation of oxygen vacancies in the ZTO ETL of our PbS QDSCs. Our work signifies the importance of Sn doping into the conventional ZnO ETL for the superior electron extraction in PbS QDSCs.

A novel approach to generate a recombinant toxoid vaccine against Clostridium difficile.

The Clostridium difficile toxins A and B are primarily responsible for symptoms of C. difficile associated disease and are prime targets for vaccine development. We describe a plasmid-based system for the production of genetically modified toxins in a non-sporulating strain of C. difficile that lacks the toxin genes tcdA and tcdB. TcdA and TcdB mutations targeting established glucosyltransferase cytotoxicity determinants were introduced into recombinant plasmids and episomally expressed toxin mutants purified from C. difficile transformants. TcdA and TcdB mutants lacking glucosyltransferase and autoproteolytic processing activities were ~10 000-fold less toxic to cultured human IMR-90 cells than corresponding recombinant or native toxins. However, both mutants retained residual cytotoxicity that could be prevented by preincubating the antigens with specific antibodies or by formalin treatment. Such non-toxic formalin-treated mutant antigens were immunogenic and protective in a hamster model of infection. The remaining toxicity of untreated TcdA and TcdB mutant antigens was associated with cellular swelling, a phenotype consistent with pore-induced membrane leakage. TcdB substitution mutations previously shown to block vesicular pore formation and toxin translocation substantially reduced residual toxicity. We discuss the implications of these results for the development of a C. difficile toxoid vaccine.

Phase-selective sorbent xerogels as reclamation agents for oil spills.

12-Hydroxystearic acid (12-HSA) xerogels derived from 12-HSA-acetronitrile organogels are highly effective sorbent materials capable of adsorbing apolar, spilled materials in aqueous environments. 12-HSA xerogels made from 12-HSA-acetronitrile organogels are more effective than 12-HSA xerogels made from 12-HSA-pentane organogels because of the highly branched fibrillar networks established in acetonitrile molecular gels. This difference arises because of dissimilarities in the network structure between 12-HSA in various solvents. These xerogels, being thermoreversible, allow for both the spilled oil to be reclaimed but also the gelator may be reused to engineer new xerogels for oil spill containment and cleanup.

Genetic alteration of endothelial heparan sulfate selectively inhibits tumor angiogenesis.

To examine the role of endothelial heparan sulfate during angiogenesis, we generated mice bearing an endothelial-targeted deletion in the biosynthetic enzyme N-acetylglucosamine N-deacetylase/N-sulfotransferase 1 (Ndst1). Physiological angiogenesis during cutaneous wound repair was unaffected, as was growth and reproductive capacity of the mice. In contrast, pathological angiogenesis in experimental tumors was altered, resulting in smaller tumors and reduced microvascular density and branching. To simulate the angiogenic environment of the tumor, endothelial cells were isolated and propagated in vitro with proangiogenic growth factors. Binding of FGF-2 and VEGF(164) to cells and to purified heparan sulfate was dramatically reduced. Mutant endothelial cells also exhibited altered sprouting responses to FGF-2 and VEGF(164), reduced Erk phosphorylation, and an increase in apoptosis in branching assays. Corresponding changes in growth factor binding to tumor endothelium and apoptosis were also observed in vivo. These findings demonstrate a cell-autonomous effect of heparan sulfate on endothelial cell growth in the context of tumor angiogenesis.

Pancreatitis: a potential complication of liraglutide?

OBJECTIVE: To review the evidence surrounding a potential association between liraglutide and pancreatitis. DATA SOURCES: A literature search was conducted in MEDLINE (1948-July 12, 2012) and EMBASE (1974-week 27, 2012) using the search terms pancreatitis, liraglutide, and glucagon-like peptide 1/adverse effects. Reference citations from identified publications were reviewed. The manufacturer was contacted and regulatory documents from the Food and Drug Administration website were reviewed for unpublished data related to cases of pancreatitis associated with liraglutide use. STUDY SELECTION AND DATA EXTRACTION: All identified sources that were published in English were considered for inclusion. DATA SYNTHESIS: Eleven cases of pancreatitis have been reported in patients taking liraglutide. Seven were from the LEAD (Liraglutide Effect and Action in Diabetes) studies, 1 was reported in the extension of a clinical trial, and 1 was in an unpublished obesity trial. Two were published postmarketing case reports. Nine of the cases reported were diagnosed as acute pancreatitis, while 2 were classified as chronic pancreatitis. The mean age of the patients was 57.5 years and mean body mass index was 33.92 kg/m(2). Six of the 11 cases occurred in male patients. Nine of the patients were white and 1 was African American. In 7 of the cases, onset occurred at liraglutide doses at or above 1.8 mg daily. Common comorbidities included history of pancreatitis, cholelithiasis, and diabetes. One case was fatal. CONCLUSIONS: Pancreatitis is a potential complication with liraglutide therapy. Liraglutide should be used cautiously in patients at risk of pancreatitis (eg, alcohol abuse, history of pancreatitis, cholelithiasis).

Acute pancreatitis associated with liraglutide.

OBJECTIVE: To report what is, to our knowledge, the first postmarketing case of acute pancreatitis associated with liraglutide. CASE SUMMARY: A 60-year-old female with type 2 diabetes presented with a 16-hour history of mid-epigastric pain 3 weeks after treatment was changed from exenatide 10 µg twice daily, which she had taken for 4 years, to liraglutide 1.8 mg daily. Her serum lipase level was elevated (478 units/L) at admission, and other laboratory values were within normal limits. Liraglutide was discontinued at admission. Standard therapy for pancreatitis resulted in symptom resolution and a significant decrease in serum lipase (131 units/L) by hospital day 4; she was discharged on hospital day 5. DISCUSSION: Based on the Naranjo scale, this case represents a probable adverse drug reaction. Eight cases of pancreatitis were observed in liraglutide-treated patients in premarketing clinical trials. Extensive literature describing exenatide-related pancreatitis and premarketing reports of liraglutide-related pancreatitis, along with the temporal relationship between the initiation of liraglutide and the onset of this patient's symptoms, suggest that the episode of pancreatitis was induced by liraglutide. CONCLUSIONS: Liraglutide should be used cautiously in patients with a history of pancreatitis, and clinicians should have a high index of suspicion for this rare, but potentially serious, adverse effect.

Foldable Perovskite Solar Cells Using Carbon Nanotube-Embedded Ultrathin Polyimide Conductor.

Recently, foldable electronics technology has become the focus of both academic and industrial research. The foldable device technology is distinct from flexible technology, as foldable devices have to withstand severe mechanical stresses such as those caused by an extremely small bending radius of 0.5 mm. To realize foldable devices, transparent conductors must exhibit outstanding mechanical resilience, for which they must be micrometer-thin, and the conducting material must be embedded into a substrate. Here, single-walled carbon nanotubes (CNTs)-polyimide (PI) composite film with a thickness of 7 µm is synthesized and used as a foldable transparent conductor in perovskite solar cells (PSCs). During the high-temperature curing of the CNTs-embedded PI conductor, the CNTs are stably and strongly p-doped using MoO x , resulting in enhanced conductivity and hole transportability. The ultrathin foldable transparent conductor exhibits a sheet resistance of 82 Ω sq.-1 and transmittance of 80% at 700 nm, with a maximum-power-point-tracking-output of 15.2% when made into a foldable solar cell. The foldable solar cells can withstand more than 10 000 folding cycles with a folding radius of 0.5 mm. Such mechanically resilient PSCs are unprecedented; further, they exhibit the best performance among the carbon-nanotube-transparent-electrode-based flexible solar cells.

Phenotypes Associated with 16p11.2 Copy Number Gains and Losses at a Single Institution.

Chromosome 16p11.2 is one of the susceptible sites for recurrent copy number variations (CNVs) due to flanking near-identical segmental duplications. Five segmental duplications, named breakpoints 1 to 5 (BP1-BP5), have been defined as recombination hotspots within 16p11.2. Common CNVs on 16p11.2 include a proximal ~593 kb between BP4 and BP5, and a distal ~220 kb between BP2 and BP3. We performed a search for patients carrying 16p11.2 CNVs, as detected using chromosome microarray (CMA), in the Molecular Diagnostic Laboratory at the University of Texas Medical Branch (UTMB), in Galveston. From March 2013 through April 2018, a total of 1200 CMA results were generated for germline testing, and 14 patients tested positive for 16p11.2 CNVs, of whom 7 had proximal deletion, 2 had distal deletion, 4 had proximal duplication, and 1 had distal duplication. Herein, we provide detailed phenotype data for these patients. Our study results show that developmental delay, abnormal body weight, behavioral problems, and hypotonia are common phenotypes associated with 16p11.2 CNVs.

Evaluation of microflow configurations for scale inhibition and serial X-ray diffraction analysis of crystallization processes.

The clean and reproducible conditions provided by microfluidic devices are ideal sample environments for in situ analyses of chemical and biochemical reactions and assembly processes. However, the small size of microchannels makes investigating the crystallization of poorly soluble materials on-chip challenging due to crystal nucleation and growth that result in channel fouling and blockage. Here, we demonstrate a reusable insert-based microfluidic platform for serial X-ray diffraction analysis and examine scale formation in response to continuous and segmented flow configurations across a range of temperatures. Under continuous flow, scale formation on the reactor walls begins almost immediately on mixing of the crystallizing species, which over time results in occlusion of the channel. Depletion of ions at the start of the channel results in reduced crystallization towards the end of the channel. Conversely, segmented flow can control crystallization, so it occurs entirely within the droplet. Consequently, the spatial location within the channel represents a temporal point in the crystallization process. Whilst each method can provide useful crystallographic information, time-resolved information is lost when reactor fouling occurs and changes the solution conditions with time. The flow within a single device can be manipulated to give a broad range of information addressing surface interaction or solution crystallization.