Red Blood Cell Fatty Acid Profiles Are Significantly Altered in South Australian Mild Cognitive Impairment and Alzheimer's Disease Cases Compared to Matched Controls.

Nutritional imbalances have been associated with a higher risk for cognitive impairment. This study determined the red blood cell (RBC) fatty acid profile of newly diagnosed mild cognitive impairment (MCI) and Alzheimer's disease (AD) patients compared to age and gender-matched controls. There was a significant increase in palmitic acid (p < 0.00001) for both MCI and AD groups. Saturated fatty acids were significantly elevated in the MCI group, including stearic acid (p = 0.0001), arachidic acid (p = 0.003), behenic acid (p = 0.0002), tricosanoic acid (p = 0.007) and lignoceric acid (p = 0.001). n-6 polyunsaturated fatty acids (PUFAs) were significantly reduced in MCI, including linoleic acid (p = 0.001), γ-linolenic acid (p = 0.03), eicosatrienoic acid (p = 0.009) and arachidonic acid (p < 0.00004). The n-3 PUFAs, α-linolenic acid and docosahexaenoic acid, were both significantly reduced in MCI and AD (p = 0.0005 and p = 0.00003). A positive correlation was evident between the Mini-Mental State Examination score and nervonic acid in MCI (r = 0.54, p = 0.01) and a negative correlation with γ-linolenic acid in AD (r = -0.43, p = 0.05). Differences in fatty acid profiles may prove useful as potential biomarkers reflecting increased risk for dementia.

Randomized controlled trial of perhexiline on regression of left ventricular hypertrophy in patients with symptomatic hypertrophic cardiomyopathy (RESOLVE-HCM trial).

BACKGROUND: The presence and extent of left ventricular hypertrophy (LVH) is a major determinant of symptoms in patients with hypertrophic cardiomyopathy (HCM). There is increasing evidence to suggest that myocardial energetic impairment represents a central mechanism leading to LVH in HCM. There is currently a significant unmet need for disease-modifying therapy that regresses LVH in HCM patients. Perhexiline, a potent carnitine palmitoyl transferase-1 (CPT-1) inhibitor, improves myocardial energetics in HCM, and has the potential to reduce LVH in HCM. OBJECTIVE: The primary objective is to evaluate the effects of perhexiline treatment on the extent of LVH, in symptomatic HCM patients with at least moderate LVH. METHODS/DESIGN: RESOLVE-HCM is a prospective, multicenter double-blind placebo-controlled randomized trial enrolling symptomatic HCM patients with at least moderate LVH. Sixty patients will be randomized to receive either perhexiline or matching placebo. The primary endpoint is change in LVH, assessed utilizing cardiovascular magnetic resonance (CMR) imaging, after 12-months treatment with perhexiline. SUMMARY: RESOLVE-HCM will provide novel information on the utility of perhexiline in regression of LVH in symptomatic HCM patients. A positive result would lead to the design of a Phase 3 clinical trial addressing long-term effects of perhexiline on risk of heart failure and mortality in HCM patients.

The influence of secondary processing on the structural relaxation dynamics of fluticasone propionate.

This study investigated the structural relaxation of micronized fluticasone propionate (FP) under different lagering conditions and its influence on aerodynamic particle size distribution (APSD) of binary and tertiary carrier-based dry powder inhaler (DPI) formulations. Micronized FP was lagered under low humidity (LH 25 C, 33% RH [relative humidity]), high humidity (HH 25°C, 75% RH) for 30, 60, and 90 days, respectively, and high temperature (HT 60°C, 44% RH) for 14 days. Physicochemical, surface interfacial properties via cohesive-adhesive balance (CAB) measurements and amorphous disorder levels of the FP samples were characterized. Particle size, surface area, and rugosity suggested minimal morphological changes of the lagered FP samples, with the exception of the 90-day HH (HH90) sample. HH90 FP samples appeared to undergo surface reconstruction with a reduction in surface rugosity. LH and HH lagering reduced the levels of amorphous content over 90-day exposure, which influenced the CAB measurements with lactose monohydrate and salmeterol xinafoate (SX). CAB analysis suggested that LH and HH lagering led to different interfacial interactions with lactose monohydrate but an increasing adhesive affinity with SX. HT lagering led to no detectable levels of the amorphous disorder, resulting in an increase in the adhesive interaction with lactose monohydrate. APSD analysis suggested that the fine particle mass of FP and SX was affected by the lagering of the FP. In conclusion, environmental conditions during the lagering of FP may have a profound effect on physicochemical and interfacial properties as well as product performance of binary and tertiary carrier-based DPI formulations.

A network of regulatory innovations to improve FDA quality assessments of human drug applications.

A network of regulatory innovations brings a holistic approach to improving the submission, assessment, and lifecycle management of pharmaceutical quality information in the U.S. This dedicated effort in the FDA's Center for Drug Evaluation and Research (CDER) aims to enhance the quality assessment of submissions for new drugs, generic drugs, and biological products including biosimilars. These regulatory innovations include developing or contributing: (i) the Knowledge-Aided Assessment and Structured Application (KASA), (ii) a new common technical document for quality (ICH M4Q(R2)), (iii) structured data on Pharmaceutical Quality/Chemistry, Manufacturing and Controls (PQ/CMC), (iv) Integrated Quality Assessment (IQA), (v) the Quality Surveillance Dashboard (QSD), and (vi) the Established Conditions tool from the ICH Q12 guideline. The innovations collectively drive CDER toward a more coordinated, effective, and efficient quality assessment. Improvements are made possible by structured regulatory submissions, a systems approach to quality risk management, and data-driven decisions based on science, risk, and effective knowledge management. The intended result is better availability of quality medicines for U.S. patients.

Emerging Applications and Regulatory Strategies for Advanced Medicines Manufacturing - Towards the Development of a Platform Approach.

The last decade has seen Advanced Medicines Manufacturing (AMM) progress from isolated product developments to the creation of industry-academic centres of excellence, regulatory innovation progressing leading to new standards, and product commercialisation across multiple product formats. This paper examines these developments focusing on successful applications and strategies presented at the 2023 Symposium of the International Consortium for Advanced Medicines Manufacturing (ICAMM). Despite these exemplar applications, there remain significant challenges to the sector-wide adoption of AMM technologies. Drawing on Symposium delegate expert responses to open-ended questions, our coding-based thematic analysis suggest three primary enablers drive successful adoption of AMM technologies at scale, namely: the ability to leverage pre-competitive collaborations to challenge-based problem solving; information and knowledge sharing through centres of excellence; and the development of AMM specific regulatory standards. Further analysis of expert responses identified the emergence of a 'Platform creation' approach to AMM innovation; characterised by: i) New collaboration modes; ii) Exploration of common product-process platforms for new dosage forms and therapy areas; iii) Development of modular equipment assets that enable scale-out, and offer more decentralized or distributed manufacturing models; iv) Standards based on product-process platform archetypes; v) Implementation strategies where platform-thinking and AMM technologies can significantly reduce timelines between discovery, approval and GMP readiness. We provide a definition of the Platform creation concept for AMM and discuss the requirements for its systematic development.

An audit of pharmaceutical continuous manufacturing regulatory submissions and outcomes in the US.

Continuous manufacturing (CM) sends materials directly and continuously to the next step of a process, eliminating hold times and reducing processing times. The potential benefits of CM include improved product quality, reduced waste, lower costs, and increased manufacturing flexibility and agility. Some pharmaceutical manufacturers have been hesitant to adopt CM owing to perceived regulatory risks such as increased time to regulatory approval and market entry, more difficulty submitting postapproval changes, and higher inspectional scrutiny. An FDA self-audit of regulatory submissions in the U.S. examined the outcomes, at approval and during the product lifecycle, of continuous manufacturing applications as compared to traditional batch applications. There were no substantial regulatory barriers identified for CM applications related to manufacturing process changes or pre-approval inspections. CM applicants had relatively shorter times to approval and market as compared to similar batch applications, based on the mean or median times to approval (8 or 3 months faster) and marketing (12 or 4 months faster) from submission, translating to an estimated $171-537 M in early revenue benefit.

Industry 4.0 for pharmaceutical manufacturing: Preparing for the smart factories of the future.

Over the last two centuries, medicines have evolved from crude herbal and botanical preparations into more complex manufacturing of sophisticated drug products and dosage forms. Along with the evolution of medicines, the manufacturing practices for their production have advanced from small-scale manual processing with simple tools to large-scale production as part of a trillion-dollar pharmaceutical industry. Today's pharmaceutical manufacturing technologies continue to evolve as the internet of things, artificial intelligence, robotics, and advanced computing begin to challenge the traditional approaches, practices, and business models for the manufacture of pharmaceuticals. The application of these technologies has the potential to dramatically increase the agility, efficiency, flexibility, and quality of the industrial production of medicines. How these technologies are deployed on the journey from data collection to the hallmark digital maturity of Industry 4.0 will define the next generation of pharmaceutical manufacturing. Acheiving the benefits of this future requires a vision for it and an understanding of the extant regulatory, technical, and logistical barriers to realizing it.

Can Pharmacokinetic Studies Assess the Pulmonary Fate of Dry Powder Inhaler Formulations of Fluticasone Propionate?

In the context of streamlining generic approval, this study assessed whether pharmacokinetics (PK) could elucidate the pulmonary fate of orally inhaled drug products (OIDPs). Three fluticasone propionate (FP) dry powder inhaler (DPI) formulations (A-4.5, B-3.8, and C-3.7), differing only in type and composition of lactose fines, exhibited median mass aerodynamic diameter (MMAD) of 4.5 µm (A-4.5), 3.8 µm (B-3.8), and 3.7 µm (C-3.7) and varied in dissolution rates (A-4.5 slower than B-3.8 and C-3.7). In vitro total lung dose (TLDin vitro) was determined as the average dose passing through three anatomical mouth-throat (MT) models and yielded dose normalization factors (DNF) for each DPI formulation X (DNFx = TLDin vitro,x/TLDin vitro,A-4.5). The DNF was 1.00 for A-4.5, 1.32 for B-3.8, and 1.21 for C-3.7. Systemic PK after inhalation of 500 µg FP was assessed in a randomized, double-blind, four-way crossover study in 24 healthy volunteers. Peak concentrations (Cmax) of A-4.5 relative to those of B-3.8 or C-3.7 lacked bioequivalence without or with dose normalization. The area under the curve (AUC0-Inf) was bio-IN-equivalent before dose normalization and bioequivalent after dose normalization. Thus, PK could detect differences in pulmonary available dose (AUC0-Inf) and residence time (dose-normalized Cmax). The differences in dose-normalized Cmax could not be explained by differences in in vitro dissolution. This might suggest that Cmax differences may indicate differences in regional lung deposition. Overall this study supports the use of PK studies to provide relevant information on the pulmonary performance characteristics (i.e., available dose, residence time, and regional lung deposition).

The Current Scientific and Regulatory Landscape in Advancing Integrated Continuous Biopharmaceutical Manufacturing.

There is a trend across the pharmaceutical sector toward process intensification and continuous manufacturing to produce small-molecule drugs or biotechnology products. For biotechnology products, advancing the manufacturing technology behind upstream and downstream processes has the potential to reduce product shortages and variability, allow for production flexibility, simplify scale-up procedures, improve product quality, reduce facility footprints, increase productivity, and reduce production costs. On the upstream side of biotechnology manufacturing, continuous perfusion cell cultures are fairly well established. However, truly integrated continuous biomanufacturing requires the uninterrupted connection of continuous unit operations (upstream and downstream) with no isolated intermediate or hold steps occurring between them. This work examines the current scientific and regulatory landscape surrounding the implementation of integrated continuous biomanufacturing.

Liposomal Drug Product Development and Quality: Current US Experience and Perspective.

Research in the area of liposomes has grown substantially in the past few decades. Liposomes are lipid bilayer structures that can incorporate drug substances to modify the drug's pharmacokinetic profile thereby improving drug delivery. The agency has received over 400 liposomal drug product submissions (excluding combination therapies), and there are currently eight approved liposomal drug products on the US market. In order to identify the pain points in development and manufacturing of liposomal drug products, a retrospective analysis was performed from a quality perspective on submissions for new and generic liposomal drug products. General analysis on liposomal drug product submissions was also performed. Results indicated that 96% of the submissions were Investigational New Drug (IND) applications, 3% were New Drug Applications (NDAs), and the remaining 1% was Abbreviated New Drug Applications (ANDAs). Doxorubicin hydrochloride was the most commonly used drug substance incorporated into the liposomes (31%). The majority of the liposomal products were administered via intravenous route (84%) with cancer (various types) being the most common indication (63%). From a quality perspective, major challenges during the development of liposomal drug products included identification and (appropriate) characterization of critical quality attributes of liposomal drug products and suitable control strategies during product development. By focusing on these areas, a faster and more efficient development of liposomal drug products may be achieved. Additionally, in this way, the drug review process for such products can be streamlined.

Development Considerations for Nanocrystal Drug Products.

Nanocrystal technology has emerged as a valuable tool for facilitating the delivery of poorly water-soluble active pharmaceutical ingredients (APIs) and enhancing API bioavailability. To date, the US Food and Drug Administration (FDA) has received over 80 applications for drug products containing nanocrystals. These products can be delivered by different routes of administration and are used in a variety of therapeutic areas. To aid in identifying key developmental considerations for these products, a retrospective analysis was performed on the submissions received by the FDA to date. Over 60% of the submissions were for the oral route of administration. Based on the Biopharmaceutics Classification System (BCS), most nanocrystal drugs submitted to the FDA are class II compounds that possess low aqueous solubility and high intestinal permeability. Impact of food on drug bioavailability was reduced for most nanocrystal formulations as compared with their micronized counterparts. For all routes of administration, dose proportionality was observed for some, but not all, nanocrystal products. Particular emphasis in the development of nanocrystal products was placed on the in-process tests and controls at critical manufacturing steps (such as milling process), mitigation and control of process-related impurities, and the stability of APIs or polymorphic form (s) during manufacturing and upon storage. This emphasis resulted in identifying challenges to the development of these products including accurate determination of particle size (distribution) of drug substance and/or nanocrystal colloidal dispersion, identification of polymorphic form (s), and establishment of drug substance/product specifications.

The evolving landscape of drug products containing nanomaterials in the United States.

The Center for Drug Evaluation and Research (CDER) within the US Food and Drug Administration (FDA) is tracking the use of nanotechnology in drug products by building and interrogating a technical profile of products containing nanomaterials submitted to CDER. In this Analysis, data from more than 350 products show an increase in the submissions of drug products containing nanomaterials over the last two decades. Of these, 65% are investigational new drugs, 17% are new drug applications and 18% are abbreviated new drug applications, with the largest class of products being liposomal formulations intended for cancer treatments. Approximately 80% of products have average particle sizes of 300 nm or lower. This analysis identifies several trends in the development of drug products containing nanomaterials, including the relative rate of approvals of these products, and provides a comprehensive overview on the landscape of nanotechnology application in medicine.

Building parity between brand and generic peptide products: Regulatory and scientific considerations for quality of synthetic peptides.

Peptides are a fast growing segment in the pharmaceutical industry. Consequently, the industry and regulatory agencies are increasing their focus on the regulatory path and quality considerations for peptide development and manufacturing. Although most peptides are synthetic, manufactured by solid phase synthesis, nevertheless they are complex molecules with challenging quality and regulatory aspects. This paper provides a structured overview of relevant quality issues for chemically synthesized peptides used as active pharmaceutical ingredients (API) in drug products. It addresses the unique characteristics of peptides pertaining to structural and physicochemical characterization, manufacturing and in process controls, impurities and aggregates arising from manufacturing and storage, along with their potential impact on safety (including immunogenicity) and efficacy of the peptide drug products.

Regulatory Perspectives on Continuous Pharmaceutical Manufacturing: Moving From Theory to Practice: September 26-27, 2016, International Symposium on the Continuous Manufacturing of Pharmaceuticals.

Continuous manufacturing plays a key role in enabling the modernization of pharmaceutical manufacturing. The fate of this emerging technology will rely, in large part, on the regulatory implementation of this novel technology. This paper, which is based on the 2nd International Symposium on the Continuous Manufacturing of Pharmaceuticals, describes not only the advances that have taken place since the first International Symposium on Continuous Manufacturing of Pharmaceuticals in 2014, but the regulatory landscape that exists today. Key regulatory concepts including quality risk management, batch definition, control strategy, process monitoring and control, real-time release testing, data processing and management, and process validation/verification are outlined. Support from regulatory agencies, particularly in the form of the harmonization of regulatory expectations, will be crucial to the successful implementation of continuous manufacturing. Collaborative efforts, among academia, industry, and regulatory agencies, are the optimal solution for ensuring a solid future for this promising manufacturing technology.

Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies.

Advancing pharmaceutical quality: An overview of science and research in the U.S. FDA's Office of Pharmaceutical Quality.

Failures surrounding pharmaceutical quality, particularly with respect to product manufacturing issues and facility remediation, account for the majority of drug shortages and product recalls in the United States. Major scientific advancements pressure established regulatory paradigms, especially in the areas of biosimilars, precision medicine, combination products, emerging manufacturing technologies, and the use of real-world data. Pharmaceutical manufacturing is increasingly globalized, prompting the need for more efficient surveillance systems for monitoring product quality. Furthermore, increasing scrutiny and accelerated approval pathways provide a driving force to be even more efficient with limited regulatory resources. To address these regulatory challenges, the Office of Pharmaceutical Quality (OPQ) in the Center for Drug Evaluation and Research (CDER) at the U.S. Food and Drug Administration (FDA) harbors a rigorous science and research program in core areas that support drug quality review, inspection, surveillance, standards, and policy development. Science and research is the foundation of risk-based quality assessment of new drugs, generic drugs, over-the-counter drugs, and biotechnology products including biosimilars. This is an overview of the science and research activities in OPQ that support the mission of ensuring that safe, effective, and high-quality drugs are available to the American public.

Application of the modified chi-square ratio statistic in a stepwise procedure for cascade impactor equivalence testing.

Equivalence testing of aerodynamic particle size distribution (APSD) through multi-stage cascade impactors (CIs) is important for establishing bioequivalence of orally inhaled drug products. Recent work demonstrated that the median of the modified chi-square ratio statistic (MmCSRS) is a promising metric for APSD equivalence testing of test (T) and reference (R) products as it can be applied to a reduced number of CI sites that are more relevant for lung deposition. This metric is also less sensitive to the increased variability often observed for low-deposition sites. A method to establish critical values for the MmCSRS is described here. This method considers the variability of the R product by employing a reference variance scaling approach that allows definition of critical values as a function of the observed variability of the R product. A stepwise CI equivalence test is proposed that integrates the MmCSRS as a method for comparing the relative shapes of CI profiles and incorporates statistical tests for assessing equivalence of single actuation content and impactor sized mass. This stepwise CI equivalence test was applied to 55 published CI profile scenarios, which were classified as equivalent or inequivalent by members of the Product Quality Research Institute working group (PQRI WG). The results of the stepwise CI equivalence test using a 25% difference in MmCSRS as an acceptance criterion provided the best matching with those of the PQRI WG as decisions of both methods agreed in 75% of the 55 CI profile scenarios.

Current Scientific and Regulatory Approaches for Development of Orally Inhaled and Nasal Drug Products: Overview of the IPAC-RS/University of Florida Orlando Inhalation Conference.

This article summarizes discussions at the March 2014 conference organized by the University of Florida (UF) and International Pharmaceutical Aerosol Consortium on Regulation and Science (IPAC-RS), entitled "Orlando Inhalation Conference: Approaches in International Regulation." The special focus of the conference was on global scientific and regulatory issues associated with the testing and demonstration of equivalence for the registration of orally inhaled drug products (OIDPs) in the United States, Europe, Brazil, China, and India. The scope included all types of OIDPs throughout their lifecycle, e.g., innovator/brand-name products, generics, modifications due to lifecycle management, device changes, etc. Details were presented for the U.S. "weight of evidence approach" for registration of generic products (which includes demonstration of in vitro and in vivo equivalence, as well as quantitative and qualitative sameness, and device similarity). The European "stepwise" approach was elucidated, and the thinking of regulatory agencies in the major emerging markets was clarified. The conference also highlighted a number of areas that would benefit from further research and discussion, especially around patient/device interface and human factor studies, statistical methods and criteria for demonstrating equivalence, the relative roles of in vivo and in vitro tests, and appropriate designs and metrics for in vivo studies of inhaled drugs.

Product quality for nanomaterials: current U.S. experience and perspective.

In recent years, there has been an increased focus on developing novel drug delivery systems and targeted therapies through the use of nanotechnology and nanomaterials. Such focus is translating to an increasing number of investigational new drug (IND) applications, new drug applications (NDAs), and abbreviated new drug applications (ANDAs) for drug products containing nanomaterials to the United States Food and Drug Administration (FDA). Although subject to the same rigorous regulatory standards and regulatory pathways as any drug product, unique properties that arise from the small size, large surface area, and polydispersity of nanomaterials may lead to additional scientific considerations when following current FDA guidelines and practices for drug evaluation. This review article will discuss these scientific considerations based on the experience with FDA-approved drug products containing nanomaterials.