Combinatorial Effect of Tricomponent Dual-Rim Nanoring Building Blocks: Label-Free SERS Detection of Biomolecules.

Detecting weakly adsorbing molecules via label-free surface-enhanced Raman scattering (SERS) has presented a significant challenge. To address this issue, we propose a novel approach for creating tricomponent SERS substrates using dual-rim nanorings (DRNs) made of Au, Ag, and CuO, each possessing distinct functionalities. Our method involves depositing different metals on Pt nanoring skeletons to obtain each nanoring with varying surface compositions while maintaining a similar size and shape. Next, the mixture of these nanorings is transferred into a monolayer assembly with homogeneous intermixing on a solid substrate. The surface of the CuO DRNs has dangling bonds (Cu2+) that facilitate the strong adsorption of carboxylates through the formation of chelating bonds, while the combination of Au and Ag DRNs significantly enhances the SERS signal intensity through a strong coupling effect. Notably, the tricomponent assemblies enable the successful SERS-based analysis of biomolecules such as amino acids, proteins, nucleobases, and nucleotides.

Three-Dimensional Au Octahedral Nanoheptamers: Single-Particle and Bulk Near-Field Focusing for Surface-Enhanced Raman Scattering.

Herein, we present a synthetic approach to fabricate Au nanoheptamers composed of six individual Au nanospheres interconnected through thin metal bridges arranged in an octahedral configuration. The resulting structures envelop central Au nanospheres, producing Au nanosphere heptamers with an open architectural arrangement. Importantly, the initial Pt coating of the Au nanospheres is a crucial step for protecting the inner Au nanospheres during multiple reactions. As-synthesized Au nanoheptamers exhibit multiple hot spots formed by nanogaps between nanospheres, resulting in strong electromagnetic near-fields. Additionally, we conducted surface-enhanced Raman-scattering-based detection of a chemical warfare agent simulant in the gas phase and achieved a limit of detection of 100 ppb, which is 3 orders lower than that achieved using Au nanospheres and Au nanohexamers. This pseudocore-shell nanostructure represents a significant advancement in the realm of complex nanoparticle synthesis, moving the field one step closer to sophisticated nanoparticle engineering.

Plasmonic Annular Nanotrenches with 1 nm Nanogaps for Detection of SARS-CoV-2 Using SERS-Based Immunoassay.

This study represents the synthesis of a novel class of nanoparticles denoted as annular Au nanotrenches (AANTs). AANTs are engineered to possess embedded, narrow circular nanogaps with dimensions of approximately 1 nm, facilitating near-field focusing for detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) via a surface-enhanced Raman scattering (SERS)-based immunoassay. Notably, AANTs exhibited an exceedingly low limit of detection (LOD) of 1 fg/mL for SARS-CoV-2 spike glycoproteins, surpassing the commercially available enzyme-linked immunosorbent assay (ELISA) by 6 orders of magnitude (1 ng/mL from ELISA). To assess the real-world applicability, a study was conducted on 50 clinical samples using an SERS-based immunoassay with AANTs. The results revealed a sensitivity of 96% and a selectivity of 100%, demonstrating the significantly enhanced sensing capabilities of the proposed approach in comparison to ELISA and commercial lateral flow assay kits.

Multiple Stepwise Synthetic Pathways toward Complex Plasmonic 2D and 3D Nanoframes for Generation of Electromagnetic Hot Zones in a Single Entity.

ConspectusRational design of nanocrystals with high controllability via wet chemistry is of critical importance in all areas of nanoscience and nanotechnology research. Specifically, morphologically complex plasmonic nanoparticles have received considerable attention because light-matter interactions are strongly associated with the size and shape of nanoparticles. Among many types of nanostructures, plasmonic nanoframes (NFs) with controllable structural intricacy could be excellent candidates as strong light-entrappers with inner voids as well as high surface area, leading to highly effective interaction with light and analytes compared to their solid counterparts. However, so far studies on single-rim-based NFs have suffered from insufficient near-field focusing capability due to their structural simplicity (e.g., a single rim or NF molded from simple platonic solids), which necessitates a conceptually new NF architecture. If one considers a stereoscopic nanostructure with dual, triple, and multiple resonant intra-nanogaps on each crystallographic facet of nanocrystals, unprecedented physicochemical properties could be expected. Realizing such complex multiple NFs with intraparticle surface plasmon coupling via localized surface plasmon resonance is very challenging due to the lack of synthetic strategic principles with systematic structural control, all of which require a deep understanding of surface chemistry. Moreover, realizing those complex architectures with high homogeneity in size and shape via a bottom-up method where diverse particle interactions are involved is more challenging. Although there have been several reports on NFs used for catalysis, techniques for production of structurally complex NFs with high uniformity and an understanding of the correlation between such complexity in a single plasmonic entity and electromagnetic near-field focusing have remained highly elusive.In this Account, we will summarize and highlight the rational synthetic pathways for the design of complex two-dimensional (2D) and three-dimensional (3D) NFs with unique inner rim structures and characterize their optical properties. This systematic strategy is based on publications from our group during the last 10 years. First, we will introduce a chemical step of shape transformation of triangular Au nanoplates to circular and hexagonal plates, which are used as sacrificial layers for the formation of NFs. Then, we will describe the methods on how to synthesize monorim-based plasmonic NFs using Pt scaffolds with different shapes and correlate with their electromagnetic near-field. Then, we will describe a multiple stepwise synthetic method for the formation of 2D complex NFs wherein different starting Au nanocrystals evolved from systematic shape transformation are used to produce circular, triangular, hexagonal, crescent, and Y-shaped inner hot zones. Then, we will discuss how one can synthesize NFs with multiple rims wherein rims with different diameters are concentrically connected, by exploiting chemical toolkits such as eccentric and concentric growth of Au, borrowing the concept of total synthesis that is frequently adopted in organic chemistry. We then introduce dual-rim-faceted NFs and frame-in-frame 3D matryoshka NF geometries via well-faceted growth of Au with high control of intra-nanogaps. Finally, and importantly, we will provide examples of more advanced hierarchical NF architectures produced by controlling geometrical shapes of nanoparticles, number of rims, and different components, leading to the expansion of the NF library.

A Density Functional Theory Analysis of Electrochemical Oxidation of Methane to Alcohol over High-Entropy Oxide (CoCrFeMnNi)3O4 Catalysts.

The direct conversion of methane into alcohol is a promising approach for achieving a low-carbon future, yet it remains a major challenge. In this study, we utilize density functional theory to explore the potential of the (CoCrFeMnNi)3O4 (CCFMNO) high entropy oxide (HEO) for electrochemical oxidation of methane to methanol and ethanol, alongside their competition with CO2 production. Our primary focus in this study is on thermodynamics, enabling a prompt analysis of the catalyst's potential, with the calculation of electrochemical barriers falling beyond our scope. Among all potential active sites within CCFMNO HEO, we identify Co as the most active site for methane activation when using carbonate ions as oxidants. This results in methanol production with a limiting potential of 1.4 VCHE, and ethanol and CO2 productions with a limiting potential of 1.2 VCHE. Additionally, our findings suggest that the occupied p-band center of O* on CCFMNO HEO is a potential descriptor for identifying the most active site within CCFMNO HEO. Overall, our results indicate that CCFMNO HEO holds promise as catalysts for methane oxidation to alcohols, employing carbonate ions as oxidants.

First report of soybean root rot caused by Fusarium falciforme in the Republic of Korea.

Phytopathogenic Fusarium species causing root and stem rot diseases in susceptible soybean (Glycine max (L.) Merrill) are a major threat to soybean production worldwide. Several Fusarium species have been reported to infect soybean plants in the Republic of Korea, including F. solani, F. oxysporum, F. fujikuroi, and F. graminearum (Cho et al., 2004; Choi et al., 2019; Kang et al., 2020). During the nationwide survey of soybean diseases in 2015, soybean plants showing symptoms of leaf chlorosis, wilting, and shoot death were found in soybean fields in Seosan, Chungnam. Fusarium isolates were obtained from the margins of sterilized necrotic symptomatic and asymptomatic regions of the stem tissues of diseased samples by culturing on potato dextrose agar (PDA). To examine the morphological characteristics, isolates were cultured on PDA at 25°C in the darkness for 10 days. Colonies produced white aerial mycelia with apricot pigments in the medium. Macroconidia were hyaline, slightly curved in shape with 3 or 4 septa, and their average length and width were 34.6± 0.56 µm (31.4 to 37.8 µm) and 4.7±0.16 µm (4.1 to 5.8 µm), respectively (n = 20). Microconidia were elongated, oval with 0 or 1 septum, and their average length and width were 11.4±0.87 and 5.2±0.32 µm, respectively (n = 20). The colonies and conidia exhibited morphological similarities to those of F. falciforme (Xu et al., 2022). Using the primers described by O'Donnell et al. (2008), identity of a representative strain '15-110' was further confirmed by sequencing portions of two genes, the translation elongation factor 1-alpha (EF-1α) and the second largest subunit of RNA polymerase II (RPB2). The two sequences (GenBank accession No. OQ992718 and OR060664) of 15-110 were 99% similar to those of two F. falciforme strains, 21BeanYC6-14 (GenBank accession nos. ON375419 and ON331931), and 21BeanYC6-16 (GenBank accession nos. ON697187 and ON331933). To test the pathogenicity, a single-spore isolate was cultured on carnation leaf agar (CLA) at 25℃ for 10 days. Pathogenicity test was performed by root-cutting assays using 14-day-old soybean seedlings of 'Daewon' and 'Taekwang'. Ten-day-old mycelia of 15-110 were collected from the CLA plates by scraping with distilled water, and the spore suspension was filtered and diluted to 1 × 106 conidia/mL. The roots of the soybean seedlings were partially cut and inoculated by soaking in the diluted spore suspension for two hours. The seedlings were then transplanted into 12 cm plastic pots (11 cm in height) and grown in a growth chamber at 25°C, 14h light/10h dark for 2 weeks. The infected plants exhibited wilting, observed brown discoloration on the root, and eventually died within 2 weeks, whereas the control plants inoculated with sterile water remained healthy. F. falciforme 15-110 was reisolated from infected plants, but not from the uninoculated controls. The morphology of the re-isolated fungus on PDA and its target gene sequences were identical to those of the original colony. To the best of our knowledge, this is the first report of root rot in soybean caused by F. falciforme in the Republic of Korea. Fusarium spp. induce a range of diseases in soybean plants, including root rot, damping-off, and wilt. Given the variable aggressiveness and susceptibility to fungicides among different Fusarium species, it is imperative to identify the Fusarium species posing a threat to soybean production. This understanding is crucial for developing a targeted and tailored disease management strategy to control Fusarium diseases.

First report of soybean root rot caused by Fusarium proliferatum in the Republic of Korea.

Fusarium species are widespread soilborne pathogens that can cause damping-off, root rot, and wilting in soybean [Glycine max (L.) Merrill], subsequently leading to significant yield suppression. Several Fusarium spp. have already been documented for their pathogenicity on soybean plants in the Republic of Korea. The nationwide monitoring of soybean diseases continues to identify new pathogenic Fusarium spp. In 2016, five plant samples at R3-R4 growth stages, showing symptoms of wilting in the upper parts and root rot, were collected in Suwon, Gyeonggi, Republic of Korea. Fungal colonies were obtained from the diseased root samples, with the surface sterilized in 1% sodium hypochlorite for 2 min, rinsed thrice with sterile distilled water, and placed on water agar at 25°C. Five isolates were collected and purified by single-spore isolation. The fungal mycelium was subsequently cultivated on potato dextrose agar for ten days. The isolates produced abundant, aerial, and white mycelium and became purple in old cultures. Macroconidia were slender, falcate to almost straight, usually 3 to 5 septated, and thin-walled. Microconidia were formed in chains from polyphalides, clavate or oval, usually single-celled with a flattened base. These characteristics of isolates were consistent with the description of F. proliferatum (Leslie and Summerrell 2006), and the representative isolate 16-19 was selected for molecular identification to confirm its identity as F. proliferatum. Two evolutionarily conserved genes, the translation elongation factor 1-alpha (EF-1α) and the second-largest subunit of RNA polymerase II (RPB2) genes, were partially amplified using the primers described by O'Donnell et al. (2008), resulting in nucleotide sequences of 680 and 382 base pairs, respectively. These two sequences (GenBank accession numbers: OQ992720 and OR060666) showed 100 and 99.5% identity to the EF-1α and RPB2 of F. proliferatum A40 (GenBank accession numbers: KP964907 and KP964842). For the Petri-dish pathogenicity assay (Broders et al. 2007), five surface-sterilized seeds were placed on water agar media with either sterile water or actively growing '16-19' culture. After 7 days of incubation in a growth chamber (25°C; 12-hour photoperiod), brown lesions were observed on the roots of the inoculated plants, while no symptoms were observed in the sterile water-treated controls. The experiment was conducted three times. For root-cut pathogenicity assay, conidial suspension (1×106 conidia/ml) of the isolate '16-19' was prepared with harvested mycelia cultured on PDA for 10 days with sterile water. The roots of 10-day-old soybean seedlings were partially cut and soaked in either the suspension or sterile water for 2 hours. The seedlings were transplanted into 12 cm plastic pots (11 cm in height) and grew in a greenhouse (26 ± 3°C, 13-h photoperiod). The experiment followed a completely randomized design with three replicates (i.e. three plants in a pot), and it was repeated twice. The inoculated plants began to wilt 7 days after inoculation, while the sterile water-treated controls remained healthy. Ten days after inoculation, all plants were collected, washed under running tap water, and evaluated for the presence and severity of root rot using a 0-4 scale (Chang et al. 2015). The inoculated plants exhibited reduced vigor and developed dark brown lesions on their roots. F. proliferatum was reisolated from symptomatic root tissues of the infected plants, while not from those of the controls. Its colony and spores were morphologically identical to those of the original isolate. F. proliferatum was previously reported as a causative agent of soybean root rot in the United States (Díaz Arias et al. 2011) and Canada (Chang et al. 2015). This is the first report of soybean root rot caused by F. proliferatum in the Republic of Korea. This finding implies that F. proliferatum may potentially threaten soybean production in the Republic of Korea and suggests that effective disease management strategies should be established for soybean protection against the disease, along with continuous surveillance.

Plasmonic-Magnetic Active Nanorheology for Intracellular Viscosity.

We demonstrate active plasmonic systems where plasmonic signals are repeatedly modulated by changing the orientation of nanoprobes under an external magnetic field, which is a prerequisite for in situ active nanorheology in intracellular viscosity measurements. Au/Ni/Au nanorods act as "nanotransmitters", which transmit the mechanical motion of nanorods to an electromagnetic radiation signal as a periodic sine function. This fluctuating optical response is transduced to frequency peaks via Fourier transform surface plasmon resonance (FTSPR). As a driving frequency of the external magnetic field applied to the Au/Ni/Au nanorods increases and reaches above a critical threshold, there is a transition from the synchronous motion of nanorods to asynchronous responses, leading to the disappearance of the FTSPR peak, which allows us to measure the local viscosity of the complex fluids. Using this ensemble-based method with plasmonic functional nanomaterials, we measure the intracellular viscosity of cancer cells and normal cells in a reliable and reproducible manner.

Mapping Nanoscale Electrostatic Field Fluctuations around Graphene Dislocation Cores Using Four-Dimensional Scanning Transmission Electron Microscopy (4D-STEM).

Defects in crystalline lattices cause modulation of the atomic density, and this leads to variations in the associated electrostatics at the nanoscale. Mapping these spatially varying charge fluctuations using transmission electron microscopy has typically been challenging due to complicated contrast transfer inherent to conventional phase contrast imaging. To overcome this, we used four-dimensional scanning transmission electron microscopy (4D-STEM) to measure electrostatic fields near point dislocations in a monolayer. The asymmetry of the atomic density in a (1,0) edge dislocation core in graphene yields a local enhancement of the electric field in part of the dislocation core. Through experiment and simulation, the increased electric field magnitude is shown to arise from "long-range" interactions from beyond the nearest atomic neighbor. These results provide insights into the use of 4D-STEM to quantify electrostatics in thin materials and map out the lateral potential variations that are important for molecular and atomic bonding through Coulombic interactions.

Multi-Layered PtAu Nanoframes and Their Light-Enhanced Electrocatalytic Activity via Plasmonic Hot Spots.

Here, the rational design of complex PtAu double nanoframes (DNFs) for plasmon-enhanced electrocatalytic activity toward the methanol oxidation reaction (MOR) is reported. The synthetic strategy for the DNFs consists of on-demand multiple synthetic chemical toolkits, including well-faceted Au growth, rim-on selective Pt deposition, and selective Au etching steps. DNFs are synthesized by utilizing Au truncated octahedrons (TOh) as a starting template. The outer octahedral (Oh) nanoframes (NFs) nest the inner TOh NFs, eventually forming DNFs with a tunable intra-nanogap distance. Residual Au adatoms on Pt skeletons act as light entrappers and produce plasmonic hot spots between inner and outer frames through localized surface plasmon resonance (LSPR) coupling, which promotes enhanced electrocatalytic activity for the MOR. Importantly, the correlation between the gap-induced hot carriers and electrocatalytic activity is evaluated. The highest catalytic activity is achieved when the gap is the narrowest. To further harness their light-trapping capability, hierarchically structured triple NFs (TNFs) are synthesized, wherein three NFs are entangled in a single entity with a high density of hot regions, exhibiting superior electrocatalytic activity toward the MOR with a sixfold larger current density under light irradiation compared to the dark conditions.

Plasmonic Cyclic Au Nanosphere Hexamers.

Rational design of plasmonic colloidal assemblies via bottom-up synthesis is challenging but would show unprecedented optical properties that strongly relate to the assembly's shape and spatial arrangement. Herein, the synthesis of plasmonic cyclic Au nanosphere hexamers (PCHs) is reported, wherein six Au nanospheres (Au NSs) are connected via thin metal ligaments. By tuning Au reduction, six dangling Au NSs are interconnected with a core hexagon nanoplate (NPL). Then, Pt atoms are selectively deposited on the edges of the spheres. After etching of the core, necklace-like nanostructures of Pt framework are obtained. Deposition of Au is followed, leading to PCHs in high yield (≈90%). Notably, PCHs exhibit the combinatorial plasmonic characteristics of individual Au NSs and the in-plane coupling of the six linked Au NSs. They yield highly uniform, reproducible, and polarization-independent single-particle surface-enhanced Raman scattering signals, which are attributed to the 2-dimensional isotropic alignment of the Au NSs. Those are applied to a SERS-based immunoassay as quantitative and qualitative single particle SERS nanoprobes. This assay shows a low limit-of-detection, down to 100 pm, which is orders of magnitude lower than those based on Au NSs, and one order of magnitude lower than an assay using analogous particles of smooth Au nanorings.

Ring-in-a-Triangle Nanoframes: Integrating with Intra- and Interhotspots for Highly Amplified Near-Field Focusing.

The development of a stepwise synthetic strategy for Au ring-in-a-triangle nanoframes with a high degree of structural solidity is essential to the advancement of highly amplified near-field focusing. This strategy leads to the formation of an inscribed nanoring in a triangular metal frame with stability to withstand elevated temperatures and an oxidizing environment, which is critical for successful single-particle surface-enhanced Raman scattering (SERS). The existence of inscribed nanorings plays an important role in enhancing the so-called "lightning rod effect," whereby the electromagnetic near-field enhancement occurs on the highly curved curvature of a metallic interface. We evaluated the corresponding single-particle SERS as a function of the thickness of the rims and then constructed two-dimensional (2D) bulk SERS substrates, wherein an ensemble of hotspots exists. The synergic contribution from both inter- and intrahotspots allowed the outstanding linearity of the calibration curve and the lowest limit of detection, ∼10-18 M for the analyte concentration.

Is a weekly qualitative picket fence test sufficient? A proposed alternate EPID-based weekly MLC QA program.

PURPOSE: Well-designed routine multileaf collimator (MLC) quality assurance (QA) is important to assure external-beam radiation treatment delivery accuracy. This study evaluates the clinical necessity of a comprehensive weekly (C-Weekly) MLC QA program compared to the American Association of Physics in Medicinerecommended weekly picket fence test (PF-Weekly), based on our seven-year experience with weekly MLC QA. METHODS: The C-Weekly MLC QA program used in this study includes 5 tests to analyze: (1) absolute MLC leaf position; (2) interdigitation MLC leaf position; (3) picket fence MLC leaf positions at static gantry angle; (4) minimum leaf-gap setting; and (5) volumetric-modulated arc therapy delivery. A total of 20,226 QA images from 16,855 tests (3,371 tests × 5) for 11 linacs at 5 photon clinical sites from May 2014 to June 2021 were analyzed. Failure mode and effects analysis was performed with 5 failure modes related to the 5 tests. For each failure mode, a risk probability number (RPN) was calculated for a C-Weekly and a PF-Weekly MLC QA program. The probability of occurrence was evaluated from statistical analyses of the C-Weekly MLC QA. RESULTS: The total number of failures for these 16,855 tests was 143 (0.9%): 39 (27.3%) for absolute MLC leaf position, 13 (9.1%) for interdigitation position, 9 (6.3%) for static gantry picket fence, 2 (1.4%) for minimum leaf-gap setting, and 80 (55.9%) for VMAT delivery. RPN scores for PF-Weekly MLC QA ranged from 60 to 192 and from 48 to 96 for C-Weekly MLC QA. CONCLUSION: RPNs for the 5 failure modes of MLC QA tests were quantitatively determined and analyzed. A comprehensive weekly MLC QA is imperative to lower the RPNs of the 5 failure modes to the desired level (<125); those from the PF-Weekly MLC QA program were found to be higher (>125). This supports the clinical necessity for comprehensive weekly MLC QA.

Cassiaside C Inhibits M1 Polarization of Macrophages by Downregulating Glycolysis.

Classically activated M1 macrophages reprogram their metabolism towards enhanced glycolysis to obtain energy and produce pro-inflammatory cytokines after activation by mammalian target of rapamycin complex 1 (mTORC1) and hypoxia-inducible factor (HIF)-1α. Thus, a strategy that constrains M1 polarization of macrophages via downregulation of glycolysis is essential for treating chronic inflammatory diseases. Cassiae semen has pharmacological activity against various inflammatory diseases. However, it is unclear whether specific compounds within Cassia seeds affect M1 polarization of macrophages. Here, we investigated whether Cassiaside C napthopyrone from Cassiae semen inhibits M1 polarization by downregulating glycolysis. We found that Cassiaside C reduced expression of inducible nitric oxide synthase and cyclooxygenase-2 and the phosphorylation of nuclear factor kappa B, all of which are upregulated in lipopolysaccharide (LPS)/interferon (IFN)-γ-treated Raw264.7 cells and peritoneal macrophages. Moreover, Cassiaside C-treated macrophages showed marked suppression of LPS/IFN-γ-induced HIF-1α, pyruvate dehydrogenase kinase 1, and lactate dehydrogenase A expression, along with downregulation of the phosphoinositide 3-kinases (PI3K)/AKT/mTORC1 signaling pathway. Consequently, Cassiaside C attenuated enhanced glycolysis and lactate production, but rescued diminished oxidative phosphorylation, in M1 polarized macrophages. Thus, Cassiaside C dampens M1 polarization of macrophages by downregulating glycolysis, which could be exploited as a therapeutic strategy for chronic inflammatory conditions.

Fate of endosulfan in ginseng farm and effect of granular biochar treatment on endosulfan accumulation in ginseng.

Endosulfan was widely used as an insecticide in the agricultural sector before its environmental persistence was fully understood. Although its fate and transport in the environment have been studied, the effects of historic endosulfan residues in soil and its bioaccumulation in crops are not well understood. This knowledge gap was addressed by investigating the dissipation and bioaccumulation of endosulfan in ginseng as a perennial crop in fresh and aged endosulfan-contaminated fields. In addition, the effect of granular biochar (GBC) treatment on the bioaccumulation factor (BAF) of endosulfan residue in ginseng was assessed. The 50% dissipation time (DT50) of the total endosulfan was over 770 days in both the fresh and aged soils under mulching conditions. This was at least twofold greater than the reported (6- > 200 days) in arable soil. Among the endosulfan congeners, the main contributor to the soil residue was endosulfan sulfate, as observed from 150 days after treatment. The BAF for the 2-year-old ginseng was similar in the fresh (1.682-2.055) and aged (1.372-2.570) soils, whereas the BAF for the 3-year-old ginseng in the aged soil (1.087-1.137) was lower than that in the fresh soil (1.771-2.387). The treatment with 0.3 wt% GBC extended the DT50 of endosulfan in soil; however, this could successfully suppress endosulfan uptake, and reduced the BAFs by 66.5-67.7% in the freshly contaminated soil and 32.3-41.4% in the aged soil. Thus, this adsorbent treatment could be an effective, financially viable, and sustainable option to protect human health by reducing plant uptake of endosulfan from contaminated soils.

V-9302 inhibits proliferation and migration of VSMCs, and reduces neointima formation in mice after carotid artery ligation.

Rapidly proliferating cells such as vascular smooth muscle cells (VSMCs) require metabolic programs to support increased energy and biomass production. Thus, targeting glutamine metabolism by inhibiting glutamine transport could be a promising strategy for vascular disorders such as atherosclerosis, stenosis, and restenosis. V-9302, a competitive antagonist targeting the glutamine transporter, has been investigated in the context of cancer; however, its role in VSMCs is unclear. Here, we examined the effects of blocking glutamine transport in fetal bovine serum (FBS)- or platelet-derived growth factor (PDGF)-stimulated VSMCs using V-9302. We found that V-9302 inhibited mTORC1 activity and mitochondrial respiration, thereby suppressing FBS- or PDGF-stimulated proliferation and migration of VSMCs. Moreover, V-9302 attenuated carotid artery ligation-induced neointima in mice. Collectively, the data suggest that targeting glutamine transport using V-9302 is a promising therapeutic strategy to ameliorate occlusive vascular disease.

Web-above-a-Ring (WAR) and Web-above-a-Lens (WAL): Nanostructures for Highly Engineered Plasmonic-Field Tuning and SERS Enhancement.

Synthetic strategies of web-above-a-ring (WAR) and web-above-a-lens (WAL) nanostructures are reported. The WAR has a controllable gap between the nanoring core and a nanoweb with nanopores for the effective confinement of electromagnetic field in the nanogap and subsequent surface-enhanced Raman scattering (SERS) of Raman dyes inside the gap with high signal reproducibility, which are attributed to the generation of circular 3D hot zones along the rim of Pt@Au nanorings with wrapping nanoweb architecture. More specifically, Pt@Au nanorings are adopted as a plasmonic core for structural rigidity and built porous nanowebs above them through a controlled combination of galvanic exchange and the Kirkendall effect. Both nanoweb and nanolens structures are also formed on Pt@Au nanoring, which is WAL. structure. Remarkably, plasmonic hot zone, nanopores, and hot lens are formed inside a single WAL nanostructure, and these structural components are orchestrated to generate stronger SERS signals.

Controlled metabolic cascades for protein synthesis in an artificial cell.

In recent years, researchers have been pursuing a method to design and to construct life forms from scratch - in other words, to create artificial cells. In many studies, artificial cellular membranes have been successfully fabricated, allowing the research field to grow by leaps and bounds. Moreover, in addition to lipid bilayer membranes, proteins are essential factors required to construct any cellular metabolic reaction; for that reason, different cell-free expression systems under various conditions to achieve the goal of controlling the synthetic cascades of proteins in a confined area have been reported. Thus, in this review, we will discuss recent issues and strategies, enabling to control protein synthesis cascades that are being used, particularly in research on artificial cells.

OH molecule-involved formation of point defects in monolayer graphene.

Point defects in freestanding graphene monolayers such as monovacancies (MVs) and divacancies have been investigated at atomic scale with aberration-corrected transmission electron microscopy and theoretical calculations. In general, these defects can be formed simply by the absence of individual carbon atoms and carbon bond reconstructions in the graphene lattice under electron and ion irradiation. However, in this study, we found that oxygen and hydrogen atoms can be involved in the formation of these point defects caused by the simultaneous detachment of oxygen-carbon atoms. Here we report the effect of the oxygen and hydrogen atoms on the graphene surface forming the point defects under electron beam irradiation, and their role of stabilizing other MVs when composed of 13-5 ring pairs. In addition, theoretical analysis using density functional theory calculations demonstrates that the participating atoms can form the point defects in the intermediate states and stabilize 13-5 ring pairs under electron beam irradiation.

Charge-transfer-induced 2D ferromagnetism and realization of thermo-remnant memory effect in ultrathinß-NiOOH-encapsulated graphene.

For graphene-based 2D materials, charge transfer at the interface between graphene and ferromagnetic metal leads to many intriguing phenomena. However, because of the unidirectional spin orientation in ferromagnetic transition metals, interface interaction plays a detrimental role in diminishing the magnetic parameters on 2D surfaces. To overcome this issue, we have synthesized ultrathin 2D weak antiferromagneticß-NiOOH layers on a graphene surface. By exploiting the charge transfer effect and tuning the thickness of the thinß-NiOOH layers, conversion of ferromagnetism along with giant coercivity and the thermo-remnant magnetic memory effect were observed. As antiferromagnets have two spin orientations, transfer of charge at the interface breaks the nullifying effect of zero magnetization in antiferromagnets and the combined system behaves like a 2D ferrimagnet. Whenever, the sandwich structure ofß-NiOOH/graphene/ß-NiOOH is formed, it also shows interlayer exchange coupling those results in huge exchange bias and anomalous temperature dependence of coercivity. Due to the strong exchange interaction between the layers, the combined system also shows a robust temperature-based memory effect. Spin-polarized density functional theory was also calculated to confirm the interface interaction and its quantitative evaluation by means of Bader charge analysis and charge-density mapping.