Major influencing factors identification and probabilistic health risk assessment of soil potentially toxic elements pollution in coal and metal mines across China: A systematic review.

Deposition of potentially toxic elements (PTEs) in soils due to different types of mining activities has been an increasingly important concern worldwide. Quantitative differences of soil PTEs contamination and related health risk among typical mines remain unclear. Herein, data from 110 coal mines and 168 metal mines across China were analyzed based on 265 published literatures to evaluate pollution characteristics, spatial distribution, and probabilistic health risks of soil PTEs. The results showed that PTE levels in soil from both mine types significantly exceeded background values. The geoaccumulation index (Igeo) revealed metal-mine soil pollution levels exceeded those of coal mines, with average Igeo values for Cd, Hg, As, Pb, Cu, and Zn being 3.02-15.60 times higher. Spearman correlation and redundancy analysis identified natural and anthropogenic factors affecting soil PTE contamination in both mine types. Mining activities posed a significant carcinogenic risk, with metal-mine soils showing a total carcinogenic risk an order of magnitude higher than in coal-mine soils. This study provides policymakers a quantitative foundation for developing differentiated strategies for sustainable remediation and risk-based management of PTEs in typical mining soils.

Statistical approaches to evaluate in vitro dissolution data against proposed dissolution specifications.

In vitro dissolution testing is a regulatory required critical quality measure for solid dose pharmaceutical drug products. Setting the acceptance criteria to meet compendial criteria is required for a product to be filed and approved for marketing. Statistical approaches for analyzing dissolution data, setting specifications and visualizing results could vary according to product requirements, company's practices, and scientific judgements. This paper provides a general description of the steps taken in the evaluation and setting of in vitro dissolution specifications at release and on stability.

The importance of and difficulties involved in creating molecular probes for a carbon monoxide gasotransmitter.

As one of the triumvirate of recognized gasotransmitter molecules, namely NO, H2S, and CO, the physiological effects of CO and its potential as a biomarker have been widely investigated, garnering particular attention due to its reported hypotensive, anti-inflammatory, and cytoprotective properties, making it a promising therapeutic agent. However, the development of CO molecular probes has remained relatively stagnant in comparison with the fluorescent probes for NO and H2S, owing to its inert molecular state under physiological conditions. In this review, starting from elucidating the definition and significance of CO as a gasotransmitter, the imperative for the advancement of CO probes, especially fluorescent probes, is expounded. Subsequently, the current state of development of CO probe methodologies is comprehensively reviewed, with an overview of the challenges and prospects in this burgeoning field of research.

Risk Control Values and Remediation Goals for Benzo[a]pyrene in Contaminated Sites: Sectoral Characteristics, Temporal Trends, and Empirical Implications.

Benzo[a]pyrene (BaP) is a highly carcinogenic pollutant of global concern. There is a need for a comprehensive assessment of regulation decisions for BaP-contaminated site management. Herein, we present a quantitative evaluation of remediation decisions from 206 contaminated sites throughout China between 2011 and 2021 using the cumulative distribution function (CDF) and related statistical methodologies. Generally, remediation decisions seek to establish remediation goals (RGs) based on the risk control values (RCVs). Cumulative frequency distributions, followed non-normal S-curve, emerged multiple nonrandom clusters. These clusters are consistent with regulatory guidance values (RGVs), of national and local soil levels in China. Additionally, priority interventions for contaminated sites were determined by prioritizing RCVs and identifying differences across industrial sectors. Notably, we found that RCVs and RGs became more relaxed over time, effectively reducing conservation and unsustainable social and economic impacts. The joint probability curve was applied to model decision values, which afforded a generic empirically important RG of 0.57 mg/kg. Overall, these findings will help decision-makers and governments develop appropriate remediation strategies for BaP as a ubiquitous priority pollutant.

CircCDR1as mediates PM2.5-induced lung cancer progression by binding to SRSF1.

Research indicates that particulate matter with an aerodynamic equivalent diameter of less than or equal to 2.5 µm in ambient air may induce lung cancer progression. Circular RNAs are a special kind of endogenous noncoding RNA, and their functions are reflected in various diseases and physiological processes, but there are still few studies related to PM2.5-induced lung cancer. Here, we identified that circCDR1as was upregulated in lung cancer cells stimulated with PM2.5 and positively correlated with the malignant features of lung cancer. The lower expression of CircCDR1as reduced the adverse progression of lung cancer cells after PM2.5 treatment; the lower expression of circCDR1as impaired the growth size and metastatic ability of lung cancer cells in mouse tumour models. Mechanistically, circCDR1as specifically bound to serine/arginine-rich splicing Factor 1 (SRSF1) and affected the splicing of vascular endothelial growth factor-A (VEGFA) by SRSF1. Furthermore, circCDR1as affected SRSF1 function by regulating PARK2-mediated SRSF1 ubiquitination, protein production and degradation. CircCDR1as also affected C-myc and cyclin D1 expression by regulating SRSF1 and affecting the wnt/ß-catenin signalling pathway, ultimately promoting malignant behavior and inhibiting the apoptosis of lung cancer cells, thereby causing PM2.5-induced lung cancer development.

Compound essential oils relieve oxidative stress caused by PM2 .5 exposure by inhibiting autophagy through the AMPK/mTOR pathway.

Fine particulate matter (PM2.5 ) potentially damages the respiratory system and causes respiratory diseases. Compound essential oils (CEOs) have been shown to alleviate the damage to the lung and macrophages caused by PM2.5 . However, the effect of PM2.5 exposure on the brain has rarely been investigated. When oxidative stress occurs in the brain, it readily causes neurological diseases. Autophagy is intimately involved in many physiological processes, especially processes important for the brain. Blocked or excessive autophagy causes a series of brain diseases, such as cerebral ischemia and stroke. This study investigated whether CEOs regulate excessive autophagy and reduce the oxidative stress caused by PM2.5 in the brain and BV2 microglial cells. PM2.5 increased the levels of ROS, Nox2, NF-κB and MDA while decreasing superoxide dismutase and HO-1 levels, which led to oxidative stress in the brain. The increased LC3 level and decreased P62 level suggested that PM2.5 exposure increased the level of autophagy. After exposure to PM2.5 , the levels of 5'-adenosine monophosphate-activated protein kinase (AMPK) increased, while the levels of mammalian target of rapamycin (mTOR) decreased, suggesting that PM2.5 might induce autophagy by activating the AMPK/mTOR pathway. In addition, CEOs alleviated oxidative stress and autophagy induced by PM2.5 . Therefore, we concluded that CEOs reduce oxidative stress induced by PM2.5 exposure by inhibiting autophagy via the AMPK/mTOR signaling pathway, and these findings provide new opportunities for the prevention of PM2.5 -induced brain diseases.

LncRNA Gm16410 regulates PM2.5-induced lung Endothelial-Mesenchymal Transition via the TGF-ß1/Smad3/p-Smad3 pathway.

Exposure to PM2.5 can cause serious harm to the respiratory system. Until now, although many toxicological studies have shown that pulmonary fibrosis can be caused by long-term PM2.5 exposure, there is no evidence that Endothelial-Mesenchymal Transition (EndMT) can trigger the process of pulmonary fibrosis after exposure. LncRNAs are a class of non-coding RNAs detected in mammalian cells. Nevertheless, researchers have not found whether lncRNAs participate in PM2.5 induced EndMT during pathophysiological duration. The Balb/c mouse model was exposed to PM2.5 for 4 months by dynamic intoxication. The levels of specific endothelial and mesenchymal markers were evaluated by molecular biology experiments to elucidate the mechanisms of EndMT induced by PM2.5 in lung tissues. LncRNA microarray analysis of the established mouse model of PM2.5 exposure was performed. Based on a bioinformatics analysis and RT-qPCR analysis, lncRNA Gm16410 attracted our attention. The change of lncRNA Gm16410 in mouse pulmonary vascular endothelial cells (MHCs) exposed to PM2.5 was verified, and the mechanism of lncRNA Gm16410 in EndMT was discussed. The changes of cell function were evaluated by cell migration and proliferation experiments. The molecular biology experiments proved that PM2.5 induced EndMT by activating the TGF-ß1/Smad3/p-Smad3 pathway in vitro. The relationship of EndMT and lncRNA Gm16410 was verified in mouse lung tissues and MHC cells by PM2.5 exposure. The involvement of lncRNA Gm16410 in PM2.5-induced EndMT highlights the potential of lncRNA to promote pulmonary fibrosis under environmental pollution.

Water incubation-induced fluctuating release of heavy metals in two smelter-contaminated soils.

The soil moisture regime can affect the release of heavy metals in soil. In the previous studies, slightly polluted soils or artificially contaminated soil samples were considered to investigate the effect of soil moisture. We used highly smelter-contaminated and aged soils to study the release of typical heavy metals (Cu, Zn, Cd and Pb) induced by water incubation in batch experiments with characterization via speciation and X-ray diffraction analyses (XRD). The results show that the leachable concentrations of the heavy metals increased slightly in the first 30 days, decreased drastically between 30 and 90 days, and immobilized relatively constant thereafter. The fluctuation was ascribed to the changes of soil Eh and pH, the reductive dissolution of crystalline iron oxides, the formation of new amorphous iron oxides, the absorption of dissolved organic matter and the precipitation of metal sulfide. Speciation analysis indicated that a proportion of the soil heavy metals was transformed from an exchangeable fraction to a less labile fraction after water incubation. And the presence of a lead iron oxide phase and the peak increasing of zinc sulfide were observed via XRD analyses. Finally, water incubation restrained the release of heavy metals after 180 days of incubation, and reduced the leachability of Cu, Zn, Cd and Pb by as much as 1.61%-7.21% for soil A and 0.43%-3.36% for soil B, respectively. The study findings have implications for the formulation of risk control and management strategies for heavy metals in smelter-contaminated soils.

Using Isomeric and Metabolic Ratios of DDT To Identify the Sources and Fate of DDT in Chinese Agricultural Topsoil.

The metabolic ratio of (p,p'-DDE + p,p'-DDD)/p,p'-DDT or p,p'-DDE/p,p'-DDT has been used previously to estimate the approximate half-life of p,p'-DDT, with a relatively unclear concept of "old" and "new" sources of p,p'-DDT and without paying attention to the influence by dicofol-type DDT contributed from the more recent usage of dicofol. Based on the isomeric ratio of o,p'-DDT/p,p'-DDT to distinguish the sources of DDT, this study used the corrected metabolic ratio of (p,p'-DDE + p,p'-DDD)/p,p'-DDT to estimate a more accurate half-life of p,p'-DDT using a model-based approach. This indicates the average half-life of p,p'-DDT in Chinese topsoils was 14.2 ± 0.9 years with dicofol-type DDT input considered. In deeper soil, the half-life was >30 years and the metabolic pathway of p,p'-DDT was significantly different with topsoil's. Further analysis on the fraction of DDT from technical DDT suggested that a region that had been sprayed with technical DDT was likely to have been sprayed with dicofol as well, but the monitoring residues of DDT in topsoil mainly derive from historical use of technical DDT.

A Study on the Electro-Optical Properties of Thiol-Ene Polymer Dispersed Cholesteric Liquid Crystal (PDChLC) Films.

In this study, a polymer dispersed cholesteric liquid crystal (PDChLC) film obtained via a one-step fabrication technique based on photopolymerization of a thiol-acrylate reaction system was prepared and characterized for the first time. The effects of the chiral dopant, the influence of thiol monomer functionality and content on the morphology and subsequent performance of the PDChLC films were systematically investigated. It was demonstrated that the addition of a small amount of chiral dopant slightly increased the driving voltage, but decreased the off-state transmittance significantly. Furthermore, scanning electron micrographs (SEM) shown that the liquid crystal (LC) droplet size decreased at first and then increased with the increasing amount of thiol monomer functionality, while increasing the thiol content increased the LC droplet size. Correspondingly, the electro-optical switching behavior was directly dependent on LC droplet size. By tuning the raw material composition, PDChLC film with optimized electro-optical performance was prepared.

Protective effects of lemongrass essential oil against benzo(a)pyrene-induced oxidative stress and DNA damage in human embryonic lung fibroblast cells.

Benzo(a)pyrene (BaP) was a well-known environmental pollutant, numerous studies had implicated BaP as a causative agent in human cancer, particularly lung cancer. The lemongrass essential oil (LEO) possessed various pharmacological activities, especially the anti-oxidative stress and cancer prevention. In the current study, human embryonic lung fibroblast (HELF) cells were treated with 25 mM BaP in the absence or presence of 0.5%, 1% or 2.5% LEO and the cell viability and levels of oxidative stress (OS) and DNA damage in the cells were then measured. Nineteen chemical constituents were identified in LEO, with citral being the main component, representing about 68.78%. LEO was able to protect the HELF cells against BaP-induced loss in cell viability, achieving a maximum of 95.58% cell viability at the 0.5% concentration. Treatment of HELF cells with BaP alone significantly increased the level of Malondialdehyde (MDA) and decreased superoxide dismutase (SOD) and catalase (CAT). However, these effects were suppressed when the cells were also treated with LEO, leading to enhanced levels of SOD and CAT activities (2.9- and 2-fold, respectively, compared with BaP treatment only) and reduced the level of MDA in the cells (43% reduction in malondialdehyde level). At the same time, LEO also reduced the level of DNA damage, as shown by a reduced level of 8-hydroxy-deoxyguanosine (8-OHdG). Taken together, the results showed that LEO offered protection against BaP-induced OS and DNA damage, suggesting that LEO could be a promising agent for lung cancer chemoprevention.

Treatability of volatile chlorinated hydrocarbon-contaminated soils of different textures along a vertical profile by mechanical soil aeration: A laboratory test.

Mechanical soil aeration is a simple, effective, and low-cost soil remediation technology that is suitable for sites contaminated with volatile chlorinated hydrocarbons (VCHs). Conventionally, this technique is used to treat the mixed soil of a site without considering the diversity and treatability of different soils within the site. A laboratory test was conducted to evaluate the effectiveness of mechanical soil aeration for remediating soils of different textures (silty, clayey, and sandy soils) along a vertical profile at an abandoned chloro-alkali chemical site in China. The collected soils were artificially contaminated with chloroform (TCM) and trichloroethylene (TCE). Mechanical soil aeration was effective for remediating VCHs (removal efficiency >98%). The volatilization process was described by an exponential kinetic function. In the early stage of treatment (0-7hr), rapid contaminant volatilization followed a pseudo-first order kinetic model. VCH concentrations decreased to low levels and showed a tailing phenomenon with very slow contaminant release after 8hr. Compared with silty and sandy soils, clayey soil has high organic-matter content, a large specific surface area, a high clay fraction, and a complex pore structure. These characteristics substantially influenced the removal process, making it less efficient, more time consuming, and consequently more expensive. Our findings provide a potential basis for optimizing soil remediation strategy in a cost-effective manner.

Distribution and integrated assessment of lead in an abandoned lead-acid battery site in Southwest China before redevelopment.

Lead-acid battery sites have contributed enormous amounts of lead to the environment, significantly affecting its global biogeochemical cycle and leaving the potential risks to human health. An abandoned lead-acid battery site prepared for redevelopment was selected in order to study the distribution of lead in soils, plants, rhizosphere soils and soil solutions. In total, 197 samples from 77 boreholes were collected and analyzed. Single extractions by acetic acid (HOAc) were conducted to assess the bioavailability and speciation of lead in soils for comparison with the parts of the plants that are aboveground. Health risks for future residential development were evaluated by the integrated exposure uptake biokinetic (IEUBK) model. The results indicated that lead concentrations in 83% of the soil samples exceeded the Chinese Environmental Quality Standard for soil (350 mg/kg for Pb) and mainly occurred at depths between 0 and 1.5 m while accumulating at the surface of demolished construction waste and miscellaneous fill. Lead concentrations in soil solutions and HOAc extraction leachates were linked closely to the contents of aboveground Broussonetia papyrifera and Artemisia annua, two main types of local plants that were found at the site. The probability density of lead in blood (PbB) in excess of 10 µg/dL could overtake the 99% mark in the residential scenario. The findings provided a relatively integrated method to illustrate the onsite investigations and assessment for similar sites before remediation and future development from more comprehensive aspects.

Screening of herbaceous plants for peat-enhanced rehabilitation of contaminated soil with oily sludge.

A batch pot experiment using nine herbaceous species were conducted for peat enhanced rehabilitation of contaminated soil with oily sludge in the initial contents of 0%, 1.3%, 7.4%, and 12.2%, respectively. The results showed that petroleum hydrocarbons removal, plant growth indices and enzyme activities varied depending on plant species and oil contents. Cotton, ryegrass and tall fescue were effective in the rehabilitation of oily sludge contaminated soils. The total petroleum hydrocarbon (TPH) removal ranged from 30.0% to 40.0% after 170 days of treatment. Plant biomass was shown to be the preferred indicator for screening phytoremediation plant because it was closely correlated with TPH removal and enzyme activities. Peat-enhanced plant rehabilitation could be a good strategy for the treatment of oily sludge contaminated saline soils.

Effect of a Polymercaptan Material on the Electro-Optical Properties of Polymer-Dispersed Liquid Crystal Films.

Polymer-dispersed liquid crystal (PDLC) films were prepared by the ultraviolet-light-induced polymerization of photopolymerizable monomers in nematic liquid crystal/chiral dopant/thiol-acrylate reaction monomer composites. The effects of the chiral dopant and crosslinking agents on the electro-optical properties of the PDLC films were systematically investigate. While added the chiral dopant S811 into the PDLC films, the initial off-state transmittance of the films was decreased. It was found that the weight ratio among acrylate monomers, thiol monomer PETMP and the polymercaptan Capcure 3-800 showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol-acrylate reaction and acrylate monomer polymerization reaction. While adding polymercaptans curing agent Capcure 3-800 with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers.

Health Risk Assessment Research on Heavy Metals Ingestion Through Groundwater Drinking Pathway for the Residents in Baotou, China.

Drinking groundwater is a significant pathway for human exposure to heavy metals. To evaluate the health effect of some heavy metals ingestion through the groundwater drinking pathway, the authors collected 35 groundwater samples from the drinking water wells of local residents and the exploitation wells of waterworks in Baotou, China. The monitoring results indicate that the groundwater had been polluted by heavy metals in some regions of the study area. A health risk assessment model derived from the U.S. Environmental Protection Agency was used to determine the noncarcinogenic and carcinogenic effects to residents who drink groundwater. All the respondents in the study area were at potential risk of carcinogenic health effects from arsenic when using the lowest safe standard for carcinogenic risk (1E-06). The hazard quotient values for noncarcinogenic health risk of arsenic exceeded 1 in 14.3% of the sampling wells in the study area. The research results could provide baseline data for groundwater utilization and supervision in the Baotou plain area.

DDT Vertical Migration and Formation of Accumulation Layer in Pesticide-Producing Sites.

Soil samples were collected at various depths (0.5-21.5 m) from ten boreholes that were drilled with a SH-30 Model Rig, four of which were at a dicofol production site while six were at a dichlorodiphenyltrichloroethane (DDT) production site. In industrial sites, the shallow soils at depths of 0-2 m were mostly backfill soils, which cannot represent the contamination situation of the sites. The contaminated levels in the deep original soil can represent the situation in contaminated sites. All the soil samples investigated at the DDT and dicofol production sites were found to be seriously polluted. The contents of both DDT (0.6-6071 mg/kg) and dicofol (0.5-1440 mg/kg) were much higher at the dicofol production site than at the DDT production site (DDTs, 0.01-664.6 mg/kg; dicofol, <0.1 mg/kg), even in the deep soil. DDTs had a different distribution in the soil of the pesticide production site from that in the soil outside the sites and that in agricultural soils. The results of the investigation revealed that DDTs were easily enriched in cohesive soil and in the bottom zone of aquifers, where the concentration was higher than in above the layers. DDTs were found to be hard to degrade, and their degradation speed was slower than their vertical migration, despite the fact that hydrophobic DDTs did not migrate easily in soils. In the dicofol production site, the value of DDE/DDD cannot indicate the degradation condition of DDTs, nor can the value of (DDE + DDD)/DDT identify how long DDTs have remained in the soil. It is debatable that the half-life of DDT inputted to soils is about 20-30 years, maybe longer than the generally recognized time.

Application of positive matrix factorization to source apportionment of surface water quality of the Daliao River basin, northeast China.

Surface water monitoring networks play an important role in the stream water quality management. Since a time series of data is obtained from the monitoring network, multivariate statistical techniques can be used to identify important factors or pollution sources of water system. Positive matrix factorization (PMF) is an improved factor analysis tool that has had limited application to water systems. The objective was to apply PMF to monitoring data to apportion water pollution sources in the Daliao River (DLR) basin. The DLR basin includes the Hun and Taizi River catchments in northeast China. This basin is densely populated and heavily industrialized. Fourteen monitoring stations located on the two rivers were used for monitoring 13 physical and chemical parameters from 1990 to 2002. Results show that five sources/processes in the Hun River and four in the Taizi River were identified by marker species and spatial-temporal variations of resolved factors, including point and nonpoint sources for both rivers. In addition, the industrial pollution source emission inventory data were used to compare with the resolved industrial sources. Results reveal that chemical transformations have influenced some chemical species. However, this influence is small compared with observed seasonal variations. Therefore, identification of pollution point and nonpoint sources by their seasonal variations is possible, which will also aid in water quality management. The spatial variation of the industrial pollutants typically corresponded with the urban industrial pollution source inventories.

Air-soil exchange of organochlorine pesticides in a sealed chamber.

So far little is known about air-soil exchange under any sealed circumstances (e.g., in plastic and glass sheds), which however has huge implications for the soil-air-plant pathways of persistent organic pollutants including organochlorine pesticides (OCPs). A newly designed passive air sampler was tested in a sealed chamber for measuring the vertical concentration profiles of gaseous phase OCPs (hexachlorocyclohexanes (HCHs) and dichlorodiphenyltrichloroethanes (DDTs)). Air was sampled at 5, 15, and 30 cm above ground level every 10th day during a 60-day period by deploying polyurethane foam cylinders housed in acrylonitrile butadiene styrene-covered cartridges. Concentrations and compositions of OCPs along the vertical sections indicated a clear relationship with proximity to the mixture of HCHs and DDTs which escapes from the soils. In addition, significant positive correlations were found between air temperatures and concentrations of HCHs and DDTs. These results indicated revolatilization and re-deposition being at or close to dynamic pseudo-equilibrium with the overlying air. The sampler used for addressing air-soil exchange of persistent organic pollutants in any sealed conditions is discussed.

Molecular diversity of arbuscular mycorrhizal fungi at a large-scale antimony mining area in southern China.

Arbuscular mycorrhizal fungi (AMF) have great potential for assisting heavy metal hyperaccumulators in the remediation of contaminated soils. However, little information is available about the community composition of AMF under natural conditions in soils contaminated by antimony (Sb). The objective of this study was to investigate the characteristics of AMF molecular diversity, and to explore the effects of Sb content and soil properties on the AMF community structure in an Sb mining area. Four Sb mine spoils and one adjacent reference area were selected from around the Xikuangshan mine in southern China. The association of AMF molecular diversity and community composition with the rhizosphere soils of the dominant plant species was studied by Polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis (PCR-DGGE). Results from all five studied sites showed that the diversity of AMF decreased with increasing Sb concentration. Principal component analysis (PCA) indicated that the AMF community structure was markedly different among these groups. Further redundancy analysis (RDA) showed that Sb contamination was the dominating factor influencing the AMF community structure in the Sb mine area. However, the multivariate analysis showed that, apart from the soil Sb content, extractable nitrogen content and organic matter content also attributed to AMF sequence distribution type. Some AMF sequences were only found in the highly contaminated area and these might be ideal candidates for improving phytoremediation efficiency in Sb mining regions. Gene sequencing analysis revealed that most species were affiliated with Glomus, suggesting that Glomus was the dominant AMF genus in the studied Sb mining area.