Self-Flipping Solar Seesaw Evaporators Leverage Scaling to De-Scale.

Salt scaling poses a significant obstacle to the practical implementation of solar-driven evaporation for desalination. Attempts to mitigate scaling by enhancing mass transfer often lead to a compromise in evaporation efficiency due to associated heat loss. In the present work, a novel seesaw evaporator with a Janus structure to harness scaling for periodic self-descaling is reported. The seesaw evaporators are facilely fabricated by delignifying balsa wood and subsequently single-sided spray-coating it with soot and polydimethylsiloxane (PDMS). This unique Janus structure enables the evaporator to float on the brine while ensuring an ample supply of solution for evaporation. During evaporation, salt ions are transported directionally toward the cocked end of the evaporator to form scaling, triggering the seesaw evaporator to flip once a threshold is reached. The accumulated salts re-dissolve back into the solution. By adjusting the tilt angle, the evaporator can achieve an impressive evaporation rate of up to 2.65 kg m-2  h-1 when evaporating an 8 wt.% NaCl solution. Remarkably, these evaporators maintain a stable evaporation rate during prolonged 120 h operation and produce ≈3.93-6.35 L m⁻2 ·day⁻¹ of freshwater from simulated brines when assembled into an evaporation device.

Synthesis of sinomenine derivatives with potential anti-leukemia activity.

In recent years, with sinomenine hydrochloride as the main ingredient, Qingfengteng had been formulated as various dosage forms for clinical treatment. Subsequent findings confirmed a variety of biological roles for sinomenine. Here, 15 H2S-donating sinomenine derivatives were synthesized. Target hybrids a11 displayed substantial cytotoxic effects on cancer cell lines, particularly against K562 cells, with an IC50 value of 1.36 µM. In-depth studies demonstrated that a11 arrested cell cycle at G1 phase, induced apoptosis via both morphological changes in nucleus and membrane potential collapse in mitochondria. These results indicated a11 exerted an antiproliferative effect through apoptosis induction via mitochondrial pathway.

Balance between Activity and Stability of Single Metal and Intermetallic Compounds for Electrocatalytic Hydrogen Evolution Reaction.

The higher population of the antibonding state around the Fermi level will result in better activity yet lower stability of HER (Re vs Ru metal). There seems to be a limitation or balance for using a single metal since the bonding scheme of a single metal is relatively simple. Combining Re (strong bonding), Ru (HER active), and Zr metal (corrosion-resistant) grants ternary intermetallic compound ZrRe1.75Ru025, exhibiting excellent HER activity and stability in acidic and alkaline electrolytes. The overpotential at a current density of 10 mA/cm2 (η10) for ZrRe1.75Ru025 is much lower compared to that of ZrRe2. Although the HER activity of ZrRe1.75Ru025 is not comparable to that of ZrRu2, it demonstrates outstanding HER stability, while the current density of ZrRu2 is over ca. 16% after 6 h. This suggests that intermetallic compounds can break the constraint between activity and stability in a single metal for HER, which may be applied in other fields as well.

Red nucleus IL-33 facilitates the early development of mononeuropathic pain in male rats by inducing TNF-α through activating ERK, p38 MAPK, and JAK2/STAT3.

BACKGROUND: Our recent studies have identified that the red nucleus (RN) dual-directionally modulates the development and maintenance of mononeuropathic pain through secreting proinflammatory and anti-inflammatory cytokines. Here, we further explored the action of red nucleus IL-33 in the early development of mononeuropathic pain. METHODS: In this study, male rats with spared nerve injury (SNI) were used as mononeuropathic pain model. Immunohistochemistry, Western blotting, and behavioral testing were used to assess the expressions, cellular distributions, and actions of red nucleus IL-33 and its related downstream signaling molecules. RESULTS: IL-33 and its receptor ST2 were constitutively expressed in the RN in naive rats. After SNI, both IL-33 and ST2 were upregulated significantly at 3 days and peaked at 1 week post-injury, especially in RN neurons, oligodendrocytes, and microglia. Blockade of red nucleus IL-33 with anti-IL-33 neutralizing antibody attenuated SNI-induced mononeuropathic pain, while intrarubral administration of exogenous IL-33 evoked mechanical hypersensitivity in naive rats. Red nucleus IL-33 generated an algesic effect in the early development of SNI-induced mononeuropathic pain through activating NF-κB, ERK, p38 MAPK, and JAK2/STAT3, suppression of NF-κB, ERK, p38 MAPK, and JAK2/STAT3 with corresponding inhibitors markedly attenuated SNI-induced mononeuropathic pain or IL-33-evoked mechanical hypersensitivity in naive rats. Red nucleus IL-33 contributed to SNI-induced mononeuropathic pain by stimulating TNF-α expression, which could be abolished by administration of inhibitors against ERK, p38 MAPK, and JAK2/STAT3, but not NF-κB. CONCLUSIONS: These results suggest that red nucleus IL-33 facilitates the early development of mononeuropathic pain through activating NF-κB, ERK, p38 MAPK, and JAK2/STAT3. IL-33 mediates algesic effect partly by inducing TNF-α through activating ERK, p38 MAPK and JAK2/STAT3.

Surface Coatings via the Assembly of Metal-Monophenolic Networks.

Mussel-inspired surface modification has received significant interest in recent years because of its simplicity and versatility. The deposition systems are still mainly limited to molecules with catechol chemical structures. In this paper, we report a novel deposition system based on a monophenol, vanillic acid (4-hydroxy-3-methoxybenzoic acid), to fabricate metal-phenolic network coatings on various substrates. The results of the water contact angle and zeta potential reveal that the modified polypropylene microfiltration membrane is underwater superhydrophobic and positively charged, showing applications in oil/water separation and dye removal. Furthermore, the single-face modified Janus membrane is promising in switchable oil/water separation. The results demonstrate a novel example of the metal-monophenolic deposition system, which expands the toolbox of surface coatings and facilitates the understanding of the deposition of phenols.

Red nucleus IL-6 mediates the maintenance of neuropathic pain by inducing the productions of TNF-α and IL-1ß through the JAK2/STAT3 and ERK signaling pathways.

We previously reported that interleukin (IL)-6 in the red nucleus (RN) is involved in the maintenance of neuropathic pain induced by spared nerve injury (SNI), and exerts a facilitatory effect via Janus-activated kinase 2/signal transducer and activator of transcription 3 (JAK2/STAT3) and extracellular signal-regulated kinase (ERK) signal transduction pathways. The present study aimed at investigating the roles of tumor necrosis factor-α (TNF-α) and IL-1ß in RN IL-6-mediated maintenance of neuropathic pain and related signal transduction pathways. Being similar to the elevation of RN IL-6 three weeks after SNI, increased protein levels of both TNF-α and IL-1ß were also observed in the contralateral RN three weeks after the nerve injury. The upregulations of TNF-α and IL-1ß were closely correlative with IL-6 and suppressed by intrarubral injection of a neutralizing antibody against IL-6. Administration of either the JAK2 antagonist AG490 or the ERK antagonist PD98059 to the RN of rats with SNI remarkably increased the paw withdrawal threshold (PWT) and inhibited the up-regulations of local TNF-α and IL-1ß. Further experiments indicated that intrarubral injection of exogenous IL-6 in naive rats apparently lowered the PWT of the contralateral hindpaw and boosted the local expressions of TNF-α and IL-1ß. Pretreatment with AG490 could block IL-6-induced tactile hypersensitivity and suppress the up-regulations of both TNF-α and IL-1ß. However, injection of PD98059 in advance only inhibited the upregulation of IL-1ß, but not TNF-α. These findings indicate that RN IL-6 mediates the maintenance of neuropathic pain by inducing the productions of TNF-α and IL-1ß. IL-6 induces the expression of TNF-α through the JAK2/STAT3 pathway, and the production of IL-1ß through the JAK2/STAT3 and ERK pathways.

Pregnancy outcomes after day 5 versus day 6 blastocyst-stage embryo transfer: A systematic review and meta-analysis.

AIM: To compare the pregnancy outcomes after day 5 blastocyst-stage embryo transfers (BET) versus day 6 BET following vitrified-warmed cycle and to evaluate whether the number of embryos transferred and the chromosomal status of embryo influence effect estimates. METHODS: A literature search (PubMed, Embase and MEDLINE) up to January 2019 was conducted to identify studies where women with day 6 BET were compared to women with day 5 BET. Only studies published in English language, on peer-reviewed journal were considered eligible. The following subgroup analyses were performed: (i) number of embryos transferred and (ii) chromosomal status of embryo. RESULTS: From a total of 1956 articles identified, 23 observational studies were included in the meta-analysis. We observed that day 6 BET were associated with lower implantation rate (risk ratio, RR: 1.17, 95% confidence interval, CI: 1.10-1.24), clinical pregnancy rate (RR: 1.17, 95% CI: 1.10-1.24), ongoing pregnancy rate (RR: 1.15, 95% CI: 1.07-1.24) and live birth rate (RR: 1.22, 95% CI: 1.11-1.33) than day 5 BET following vitrified-warmed cycle. The subgroup analysis found that the superiority of day 5 BET compared with day 6 BET is influenced by the number of embryos transferred and chromosomal status of embryos. CONCLUSION: Current evidence shows that day 5 BET is superior to day 6 BET following vitrified-warmed cycle in clinical practice. Due to the overall low quality of available evidence, more larger and well-conducted studies are needed to compare the pregnancy outcomes between day 5 and day 6 BET before drawing a clear conclusion.

Is vanishing twin syndrome associated with adverse obstetric outcomes of ART singletons? A systematic review and meta-analysis.

PURPOSE: The objective of our meta-analysis was to estimate the effect of VTS on obstetric outcomes of ART singletons. METHODS: PubMed, Embase, MEDLINE, and ClinicalTrials.gov were searched up to January 2019 to find studies reporting the obstetric outcomes of ART singletons with VTS. Dichotomous data were expressed as odds ratios (OR) with 95% confidence intervals (CI). Continuous data were expressed as weighted mean difference (WMD) with 95% CI. RESULTS: A total of 17 observational studies encompassing more than 60,000 ART singletons were included in this meta-analysis. The impact of VTS on singletons was highly dependent on the definition of VTS, precisely, the vanishing timing and intrauterine growth stage. When VTS happened at or before 14 weeks, regardless of intrauterine growth stage, there were no differences in terms of gestational age (GA) [WMD = - 0.08, 95% CI = - 0.27, 0.10], preterm birth (< 37 weeks) (PTB) [OR = 1.23, 95% CI = 0.89, 1.70], and low birth weight (< 2.5 kg) (LBW) [OR = 1.56, 95% CI = 1.00, 2.43] in original singletons versus singleton with VTS. On the contrary, VTS occurred after 14 weeks was associated with significantly shorter GW and lower BW, as well as higher risks of PTB and LBW. When the sac reduced in VTS was an empty gestational sac, there would be no differences in GW, PTB, and LBW between singletons versus singletons with VTS, whereas the loss of a fetus with cardiac-activity was associated with adverse obstetric outcomes. CONCLUSIONS: This meta-analysis suggests whether or not VTS is harmful to obstetric outcomes is highly dependent on the vanishing timing and intrauterine growth stage.

Red nucleus interleukin-1ß evokes tactile allodynia through activation of JAK/STAT3 and JNK signaling pathways.

We previously reported that interleukin-1ß (IL-1ß) in the red nucleus (RN) is involved in pain modulation and exerts a facilitatory effect in the development of neuropathic pain. Here, we explored the actions of signaling pathways, including the Janus kinase/signal transducer and activator of transcription 3 (JAK/STAT3), c-Jun N-terminal kinase (JNK), extracellular signal-regulated kinase (ERK), p38 mitogen-activated protein kinase (p38 MAPK) and nuclear factor-κB (NF-κB) pathways, on RN IL-1ß-mediated pain modulation. After a single dose of recombinant rat IL-1ß (rrIL-1ß, 10 ng) injected into the RN in normal rats, a tactile allodynia was evoked in the contralateral but not ipsilateral hindpaw, commencing 75 min and peaking 120 min postinjection. Up-regulated protein levels of phospho-STAT3 (p-STAT3) and p-JNK were observed in the RN 120 min after rrIL-1ß injection, the increases of p-STAT3 and p-JNK were blocked by anti-IL-1ß antibody. However, the expression levels of p-ERK, p-p38 MAPK, and NF-κB in the RN were not affected by rrIL-1ß injection. RN neurons and astrocytes contributed to IL-1ß-evoked up-regulation of p-STAT3 and p-JNK. Further studies demonstrated that injection of the JAK2 antagonist AG490 or JNK antagonist SP600125 into the RN 30 min prior to the administration of rrIL-1ß could completely prevent IL-1ß-evoked tactile allodynia, while injection of the ERK antagonist PD98059, p38 MAPK antagonist SB203580, or NF-κB antagonist PDTC did not affect IL-1ß-evoked tactile allodynia. In conclusion, our data provide additional evidence that RN IL-1ß is involved in pain modulation, and that it exerts a facilitatory effect by activating the JAK/STAT3 and JNK signaling pathways.

CuSO4/H2O2-Triggered Polydopamine/Poly(sulfobetaine methacrylate) Coatings for Antifouling Membrane Surfaces.

Mussel-inspired polydopamine (PDA) coatings have been broadly exploited for constructing functional membrane surfaces. One-step codeposition of PDA with antifouling polymers, especially zwitterionic polymers, has been regarded as a promising strategy for fabricating antifouling membrane surfaces. However, one challenge is that the codeposition is usually a slow process over 10 h or even several days. Herein, we report that CuSO4/H2O2 is able to notably accelerate the codeposition process of PDA with poly(sulfobetaine methacrylate) (PSBMA). In our case, PSBMA is facilely anchored to the polypropylene microporous membrane (PPMM) surfaces within 1 h with the assistance of PDA because of its strong interfacial adhesion. The PDA/PSBMA-coated PPMMs show excellent surface hydrophilicity, high water permeation flux (7506 ± 528 L/m2·h at 0.1 MPa), and an outstanding antifouling property. Moreover, the antifouling property is maintained after the membranes are treated with acid and alkali solutions as well as organic solvents. To recap, it provides a facile, universal, and time-saving strategy for exploiting high-efficiency and durable antifouling membrane surfaces.

T-2 toxin-induced damage to articular cartilage in rats coincided with impaired autophagy linked to the HIF-1α/AMPK signaling axis.

T-2 toxin is one of the most toxic mycotoxins. People are primarily exposed to T-2 toxin through the consumption of spoiled food, typically over extended periods and at low doses. T-2 toxin can cause damage to articular cartilage. However, the exact mechanism is not fully understood. In this experiment, 36 male rats were divided into a control group, a solvent control group, and a T-2 toxin group. The rats in the T-2 toxin group were orally administered the toxin at a dosage of 100 ng/g BW/Day. The damage to articular cartilage and key proteins associated with the autophagy process and the HIF-1α/AMPK signaling axis was assessed at 4, 8, 12, and 16 weeks. Our findings indicate that T-2 toxin-induced damage to articular cartilage in rats coincided with impaired autophagy linked to the HIF-1α/AMPK signaling pathway. This study offers novel insights into the precise mechanism underlying T-2 toxin-induced damage to articular cartilage.

Solid-state, liquid-free ion-conducting elastomers: rising-star platforms for flexible intelligent devices.

Soft ionic conductors have emerged as a powerful toolkit to engineer transparent flexible intelligent devices that go beyond their conventional counterparts. Particularly, due to their superior capacities of eliminating the evaporation, freezing and leakage issues of the liquid phase encountered with hydrogels, organohydrogels and ionogels, the emerging solid-state, liquid-free ion-conducting elastomers have been largely recognized as ideal candidates for intelligent flexible devices. However, despite their extensive development, a comprehensive and timely review in this emerging field is lacking, particularly from the perspective of design principles, advanced manufacturing, and distinctive applications. Herein, we present (1) the design principles and intriguing merits of solid-state, liquid-free ion-conducting elastomers; (2) the methods to manufacture solid-state, liquid-free ion-conducting elastomers with preferential architectures and functions using advanced technologies such as 3D printing; (3) how to leverage solid-state, liquid-free ion-conducting elastomers in exploiting advanced applications, especially in the fields of flexible wearable sensors, bioelectronics and energy harvesting; (4) what are the unsolved scientific and technical challenges and future opportunities in this multidisciplinary field. We envision that this review will provide a paradigm shift to trigger insightful thinking and innovation in the development of intelligent flexible devices and beyond.

Design of Photothermal "Ion Pumps" for Achieving Energy-Efficient, Augmented, and Durable Lithium Extraction from Seawater.

Extracting lithium from seawater has emerged as a disruptive platform to resolve the issue of an ever-growing lithium shortage. However, achieving highly efficient and durable lithium extraction from seawater in an energy-efficient manner is challenging, as imposed by the low concentration of lithium ions (Li+) and high concentration of interfering ions in seawater. Here, we report a facile and universal strategy to develop photothermal "ion pumps" (PIPs) that allow achieving energy-efficient, augmented, and durable lithium extraction from seawater under sunlight. The key design of PIPs lies in the function fusion and spatial configuration manipulation of a hydrophilic Li+-trapping nanofibrous core and a hydrophobic photothermal shell for governing gravity-driven water flow and solar-driven water evaporation. Such a synergetic effect allows PIPs to achieve spontaneous, continuous, and augmented Li+ replenishment-diffusion-enrichment, as well as circumvent the impact of concentration polarization and scaling of interfering ions. We demonstrate that our PIPs exhibit dramatic enhancement in Li+ trapping rate and outstanding Li+ separation factor yet have ultralow energy consumption. Moreover, our PIPs deliver ultrastable Li+ trapping performance without scaling even under high-concentration interfering ions for 140 h operation, as opposed to the significant decrease of nearly 55.6% in conventional photothermal configuration. The design concept and material toolkit developed in this work can also find applications in extracting high-value-added resources from seawater and beyond.

Leveraging Janus Substrates as a Confined "Interfacial Reactor" to Synthesize Ultrapermeable Polyamide Nanofilms.

Porous substrates act as open "interfacial reactors" during the synthesis of polyamide composite membranes via interfacial polymerization. However, achieving a thin and dense polyamide nanofilm with high permeance and selectivity is challenging when using a conventional substrate with uniform wettability. To overcome this limitation, we propose the use of Janus porous substrates as confined interfacial reactors to decouple the local monomer concentration from the total monomer amount during interfacial polymerization. By manipulating the location of the hydrophilic/hydrophobic interface in a Janus porous substrate, we can precisely control the monomer solution confined within the hydrophilic layer without compromising its concentration. The hydrophilic surface ensures the uniform distribution of monomers, preventing the formation of defects. By employing Janus substrates fabricated through single-sided deposition of polydopamine/polyethyleneimine, we significantly reduce the thickness of the polyamide nanofilms from 88.4 to 3.8 nm by decreasing the thickness of the hydrophilic layer. This reduction leads to a remarkable enhancement in water permeance from 7.2 to 52.0 l/m2·h·bar while still maintaining ~96% Na2SO4 rejection. The overall performance of this membrane surpasses that of most reported membranes, including state-of-the-art commercial products. The presented strategy is both simple and effective, bringing ultrapermeable polyamide nanofilms one step closer to practical separation applications.

Supergravity-Steered Generic Manufacturing of Nanosheets-Embedded Nanocomposite Hydrogel with Highly Oriented, Heterogeneous Architecture.

Designing nanocomposite hydrogels with oriented nanosheets has emerged as a promising toolkit to achieve preferential performances that go beyond their disordered counterparts. Although current fabrication strategies via electric/magnetic force fields have made remarkable achievements, they necessitate special properties of nanosheets and suffer from an inferior orientation degree of nanosheets. Herein, a facile and universal approach is discovered to elaborate MXene-based nanocomposite hydrogels with highly oriented, heterogeneous architecture by virtue of supergravity to replace conventional force fields. The key to such architecture is to leverage bidirectional, force-tunable attributes of supergravity containing coupled orthogonal shear and centrifugal force field for steering high-efficient movement, pre-orientation, and stacking of MXene nanosheets in the bottom. Such a synergetic effect allows for yielding heterogeneous nanocomposite hydrogels with a high-orientation MXene-rich layer (orientation degree, f = 0.83) and a polymer-rich layer. The authors demonstrate that MXene-based nanocomposite hydrogels leverage their high-orientation, heterogeneous architecture to deliver an extraordinary electromagnetic interference shielding effectiveness of 55.2 dB at 12.4 GHz yet using a super-low MXene of 0.3 wt%, surpassing most hydrogels-based electromagnetic shielding materials. This versatile supergravity-steered strategy can be further extended to arbitrary nanosheets including MoS2, GO, and C3N4, offering a paradigm in the development of oriented nanocomposites.

A study on atypical Kashin-Beck disease: an endemic ankle arthritis.

BACKGROUND: To study the epidemiological characteristics of atypical Kashin-Beck disease cases without characteristic hand lesions such as interphalangeal joint enlargement and brachydactyly and the characteristics of ankle joint lesions. METHODS: We investigated Kashin-Beck in the endemic villages in Heilongjiang Province. The patients were judged according to the "Diagnosis of Kashin-Beck Disease" (WS/T 207-2010). The severity of foot lesions was judged based on the changes of X-ray images. Residents of non-Kashin-Beck disease area were selected as normal controls in Jilin Province. RESULTS: A total of 119 residents over 40 years old were surveyed in a natural village in the non-endemic area. A total of 1190 residents over 40 years old were surveyed in 38 endemic areas of Kashin-Beck disease. A total of 710 patients with Kashin-Beck disease were detected, including 245 patients with grade I, 175 patients with grade II, 25 patients with grade III, and 265 atypical patients. Among all investigated patients, 92.0% (653/710) had ankle joint changes, and it was 80.0% (196/245) in grade I patients and 95.4% (167/175) in grade II. Varying degrees of ankle joint changes were found in both grade III and atypical patients. The grade of Kashin-Beck disease was correlated with the degree of ankle joint change (P < 0.001), and the correlation coefficient rs = 0.376. Atypical Kashin-Beck disease patients in mild and severe endemic area of Kashin-Beck disease were younger than those with typical Kashin-Beck disease. CONCLUSIONS: We found a correlation between the degree of ankle joint change and the grade of Kashin-Beck disease. The higher the grade of Kashin-Beck disease, the more serious the change of the ankle joint.

Photothermal Janus fabrics enabling persistent directional sweat-wicking in personal wet-thermal management.

Directional sweat-wicking by Janus fabrics has gained substantial attention in promoting personal wet-thermal management for optimal human comfort. During intense physical exercise, excessive sweating can cause the flooding of fabrics and weaken their wicking capabilities once the inner capillary channels are saturated. To address this issue, we develop a photothermal Janus fabric through a facile polydopamine (PDA) deposition followed by single-sided spray-coating of hydrophobic polydimethylsiloxane (PDMS). Such innovative fabrics enable directional sweat-wicking through a Janus structure and persistent removal of excessive sweat by solar-powered evaporation. Under sunlight, our photothermal Janus fabrics exhibit an enhanced evaporation rate, approximately twice compared with that of conventional Janus fabrics (∼1.143 ± 0.027 kg m-2h-1), making them suitable for high sweating rates during vigorous exercise. Furthermore, these fabrics help to maintain the skin temperature within the normal range, preventing hypothermia caused by profuse sweating. In addition, our photothermal Janus fabrics exhibit excellent washing durability even after multiple washing cycles, ensuring prolonged performance and safety.

Catalytic asymmetric synthesis of carboranylated diols bearing two adjacent stereocenters located at the α,ß-position of o-carborane cage carbon.

Despite the great interest in carborane-containing molecules, there is a lack of literature on the generation of central chiralities, via catalytic asymmetric transformations using prochiral carboranyl substrates. Herein, we have synthesized novel optically active icosahedral carborane-containing diols via Sharpless catalytic asymmetric dihydroxylation of carborane-derived alkenes, under mild conditions. The reaction showed a good substrate scope with 74-94% yields and 92->99% ee. This synthetic approach facilitated the creation of two adjacent stereocenters respectively located at the α,ß-position of o-carborane cage carbon, with a single syn-diastereoisomer. In addition, the obtained chiral carborane-containing diol product can be transformed to cyclic sulfate and can subsequently undergo a nucleophilic substitution and reduction to obtain the unexpected nido-carboranyl derivatives of chiral amino alcohols in the form of zwitterions.

YAP plays a protective role in T-2 toxin-induced inhibition of chondrocyte proliferation and matrix degradation.

Previous research has shown that T-2 toxin can damage cartilage, resulting in a disease phenotype similar to osteoarthritis. The precise molecular mechanism by which T-2 toxin causes chondrocyte injury, however, is unknown. The purpose of this study was to look into the role of YAP in T-2 toxin-induced rat chondrocyte injury. Based on research results, T-2 toxin decreased the levels of collagen II and PCNA while increasing the expression of matrix metalloproteinase MMP13. These findings supported the T-2 toxin's detrimental effect on chondrocytes. YAP's role in T-2 toxin-induced chondrocyte injury was also investigated. Total YAP and related nuclear proteins were found to decrease as the concentration of T-2 toxin increased. While PYAP expression was not significantly altered in response to T-2 toxin, the PYAP/YAP ratio decreased as the T-2 toxin concentration increased, implying that the HIPPO signaling pathway was activated. Furthermore, the YAP-specific inhibitor Verteporfin was used to investigate the role of YAP in T-2 toxin-induced chondrocyte injury. YAP inhibition increased MMP13 expression while decreasing COL2 and PCNA levels. In summary, the current study found that T-2 toxin decreased the levels of COL2 and PCNA while increasing the expression of MMP13 in chondrocytes after inhibiting YAP, providing a new insight into the mechanism of T-2 toxin-induced cartilage damage.

Red Nucleus Interleukin-6 Evokes Tactile Allodynia in Male Rats Through Modulating Spinal Pro-inflammatory and Anti-inflammatory Cytokines.

Our previous studies have clarified that red nucleus (RN) interleukin (IL)-6 is involved in the maintenance of neuropathic pain and produces a facilitatory effect by activating JAK2/STAT3 and ERK pathways. In this study, we further explored the immune molecular mechanisms of rubral IL-6-mediated descending facilitation at the spinal cord level. IL-6-evoked tactile allodynia was established by injecting recombinant IL-6 into the unilateral RN of naive male rats. Following intrarubral administration of IL-6, obvious tactile allodynia was evoked in the contralateral hindpaw of rats. Meanwhile, the expressions of pro-inflammatory cytokines tumor necrosis factor-α (TNF-α), IL-1ß, and IL-6 were elevated in the contralateral spinal dorsal horn (L4-L6), blocking spinal TNF-α, IL-1ß, or IL-6 with neutralizing antibodies relieved IL-6-evoked tactile allodynia. Conversely, the levels of anti-inflammatory cytokines transforming growth factor-ß (TGF-ß) and IL-10 were reduced in the contralateral spinal dorsal horn (L4-L6), an intrathecal supplement of exogenous TGF-ß, or IL-10 attenuated IL-6-evoked tactile allodynia. Further studies demonstrated that intrarubral pretreatment with JAK2/STAT3 inhibitor AG490 suppressed the elevations of spinal TNF-α, IL-1ß, and IL-6 and promoted the expressions of TGF-ß and IL-10 in IL-6-evoked tactile allodynia rats. However, intrarubral pretreatment with ERK inhibitor PD98059 only restrained the increase in spinal TNF-α and enhanced the expression of spinal IL-10. These findings imply that rubral IL-6 plays descending facilitation and produces algesic effect through upregulating the expressions of spinal pro-inflammatory cytokines TNF-α, IL-1ß, and IL-6 and downregulating the expressions of spinal anti-inflammatory cytokines TGF-ß and IL-10 by activating JAK2/STAT3 and/or ERK pathways, which provides potential therapeutic targets for the treatment of pathological pain.