MOVPE growth of GaP/GaPN core-shell nanowires: N incorporation, morphology and crystal structure.

Dilute nitride III-V nanowires (NWs) possess great potential as building blocks in future optoelectronical and electrochemical devices. Here, we provide evidence for the growth of GaP/GaPN core-shell NWs via metalorganic vapor phase epitaxy, both on GaP(111)B and on GaP/Si(111) hetero-substrates. The NW morphology meets the common needs for use in applications, i.e. they are straight and vertically oriented to the substrate as well as homogeneous in length. Moreover, no parasitical island growth is observed. Nitrogen was found to be incorporated on group V sites as determined from transmission electron microscopy (TEM) and Raman spectroscopy. Together with the incorporation of N, the NWs exhibit strong photoluminescence in the visible range, which we attribute to radiative recombination at N-related deep states. Independently of the N incorporation, a peculiar facet formation was found, with {110} facets at the top and {112} at the bottom of the NWs. TEM reveals that this phenomenon is related to different stacking fault densities within the zinc blende structure, which lead to different effective surface energies for the bottom and the top of the NWs.

Traveling interface modulations and anisotropic front propagation in ammonia oxidation over Rh(110).

The bistable NH3 + O2 reaction over a Rh(110) surface was explored in the pressure range 10(-6)-10(-3) mbar and in the temperature range 300-900 K using photoemission electron microscopy and low energy electron microscopy as spatially resolving methods. We observed a history dependent anisotropy in front propagation, traveling interface modulations, transitions with secondary reaction fronts, and stationary island structures.

Lithium transport through nanosized amorphous silicon layers.

Lithium migration in nanostructured electrode materials is important for an understanding and improvement of high energy density lithium batteries. An approach to measure lithium transport through nanometer thin layers of relevant electrochemical materials is presented using amorphous silicon as a model system. A multilayer consisting of a repetition of five [(6)LiNbO3(15 nm)/Si (10 nm)/(nat)LiNbO3 (15 nm)/Si (10 nm)] units is used for analysis, where LiNbO3 is a Li tracer reservoir. It is shown that the change of the relative (6)Li/(7)Li isotope fraction in the LiNbO3 layers by lithium diffusion through the nanosized silicon layers can be monitored nondestructively by neutron reflectometry. The results can be used to calculate transport parameters.

Catalytic CO oxidation on Pt under near ambient pressure: A NAP-LEEM study.

A near ambient pressure low-energy electron microscope (NAP-LEEM) has recently been constructed, that allows in situ imaging of surfaces up to a pressure of 10-1 mbar. Here we report on pattern formation in catalytic CO oxidation on a Pt(110) single crystal surface and on a polycrystalline Pt foil in the 10-2 mbar range, operating the microscope in the mirror electron microscopy (MEM) and in the LEEM mode. Excitations localized at structural defects and spiral wave fragments have been observed.

Insights into Interfacial Changes and Photoelectrochemical Stability of In(x)Ga(1-x)N (0001) Photoanode Surfaces in Liquid Environments.

The long-term stability of InGaN photoanodes in liquid environments is an essential requirement for their use in photoelectrochemistry. In this paper, we investigate the relationships between the compositional changes at the surface of n-type In(x)Ga(1-x)N (x ∼ 0.10) and its photoelectrochemical stability in phosphate buffer solutions with pH 7.4 and 11.3. Surface analyses reveal that InGaN undergoes oxidation under photoelectrochemical operation conditions (i.e., under solar light illumination and constant bias of 0.5 VRHE), forming a thin amorphous oxide layer having a pH-dependent chemical composition. We found that the formed oxide is mainly composed of Ga-O bonds at pH 7.4, whereas at pH 11.3 the In-O bonds are dominant. The photoelectrical properties of InGaN photoanodes are intimately related to the chemical composition of their surface oxides. For instance, after the formation of the oxide layer (mainly Ga-O bonds) at pH 7.4, no photocurrent flow was observed, whereas the oxide layer (mainly In-O bonds) at pH 11.3 contributes to enhance the photocurrent, possibly because of its reported high photocatalytic activity. Once a critical oxide thickness was reached, especially at pH 7.4, no significant changes in the photoelectrical properties were observed for the rest of the test duration. This study provides new insights into the oxidation processes occurring at the InGaN/liquid interface, which can be exploited to improve InGaN stability and enhance photoanode performance for biosensing and water-splitting applications.

A highly selective and self-powered gas sensor via organic surface functionalization of p-Si/n-ZnO diodes.

Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, using defined organic-inorganic hybrid materials. Simulations of chemical-binding interactions and the consequent electronic surface modulation give more insight into the complex sensing mechanism of selective gas detection.

Band engineered epitaxial 3D GaN-InGaN core-shell rod arrays as an advanced photoanode for visible-light-driven water splitting.

3D single-crystalline, well-aligned GaN-InGaN rod arrays are fabricated by selective area growth (SAG) metal-organic vapor phase epitaxy (MOVPE) for visible-light water splitting. Epitaxial InGaN layer grows successfully on 3D GaN rods to minimize defects within the GaN-InGaN heterojunctions. The indium concentration (In ∼ 0.30 ± 0.04) is rather homogeneous in InGaN shells along the radial and longitudinal directions. The growing strategy allows us to tune the band gap of the InGaN layer in order to match the visible absorption with the solar spectrum as well as to align the semiconductor bands close to the water redox potentials to achieve high efficiency. The relation between structure, surface, and photoelectrochemical property of GaN-InGaN is explored by transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), Auger electron spectroscopy (AES), current-voltage, and open circuit potential (OCP) measurements. The epitaxial GaN-InGaN interface, pseudomorphic InGaN thin films, homogeneous and suitable indium concentration and defined surface orientation are properties demanded for systematic study and efficient photoanodes based on III-nitride heterojunctions.