Human airway branch variation and chronic obstructive pulmonary disease.

Susceptibility to chronic obstructive pulmonary disease (COPD) beyond cigarette smoking is incompletely understood, although several genetic variants associated with COPD are known to regulate airway branch development. We demonstrate that in vivo central airway branch variants are present in 26.5% of the general population, are unchanged over 10 y, and exhibit strong familial aggregation. The most common airway branch variant is associated with COPD in two cohorts (n = 5,054), with greater central airway bifurcation density, and with emphysema throughout the lung. The second most common airway branch variant is associated with COPD among smokers, with narrower airway lumens in all lobes, and with genetic polymorphisms within the FGF10 gene. We conclude that central airway branch variation, readily detected by computed tomography, is a biomarker of widely altered lung structure with a genetic basis and represents a COPD susceptibility factor.

Quantitative CT-based structural alterations of segmental airways in cement dust-exposed subjects.

BACKGROUND: Dust exposure has been reported as a risk factor of pulmonary disease, leading to alterations of segmental airways and parenchymal lungs. This study aims to investigate alterations of quantitative computed tomography (QCT)-based airway structural and functional metrics due to cement-dust exposure. METHODS: To reduce confounding factors, subjects with normal spirometry without fibrosis, asthma and pneumonia histories were only selected, and a propensity score matching was applied to match age, sex, height, smoking status, and pack-years. Thus, from a larger data set (N = 609), only 41 cement dust-exposed subjects were compared with 164 non-cement dust-exposed subjects. QCT imaging metrics of airway hydraulic diameter (Dh), wall thickness (WT), and bifurcation angle (θ) were extracted at total lung capacity (TLC) and functional residual capacity (FRC), along with their deformation ratios between TLC and FRC. RESULTS: In TLC scan, dust-exposed subjects showed a decrease of Dh (airway narrowing) especially at lower-lobes (p < 0.05), an increase of WT (wall thickening) at all segmental airways (p < 0.05), and an alteration of θ at most of the central airways (p < 0.001) compared with non-dust-exposed subjects. Furthermore, dust-exposed subjects had smaller deformation ratios of WT at the segmental airways (p < 0.05) and θ at the right main bronchi and left main bronchi (p < 0.01), indicating airway stiffness. CONCLUSIONS: Dust-exposed subjects with normal spirometry demonstrated airway narrowing at lower-lobes, wall thickening at all segmental airways, a different bifurcation angle at central airways, and a loss of airway wall elasticity at lower-lobes. The airway structural alterations may indicate different airway pathophysiology due to cement dusts.

Transport and deposition of hygroscopic particles in asthmatic subjects with and without airway narrowing.

This study numerically investigates the effect of hygroscopicity on transport and deposition of particles in severe asthmatic lungs with distinct airway structures. The study human subjects were selected from two imaging-based severe asthmatic clusters with one characterized by non-constricted airways and the other by constricted airways in the lower left lobe (LLL). We compared the deposition fractions of sodium chloride (NaCl) particles with a range of aerodynamic diameters (1-8 µm) in cluster archetypes under conditions with and without hygroscopic growth. The temperature and water vapor distributions in the airways were simulated with an airway wall boundary condition that accounts for variable temperature and water vapor evaporation at the interface between the lumen and the airway surface liquid layer. On average, the deposition fraction increased by about 6% due to hygroscopic particle growth in the cluster subjects with constricted airways, while it increased by only about 0.5% in those with non-constricted airways. The effect of particle growth was most significant for particles with an initial diameter of 2 µm in the cluster subjects with constricted airways. The effect diminished with increasing particle size, especially for particles with an initial diameter larger than 4 µm. This suggests the necessity to differentiate asthmatic subjects by cluster in engineering the aerosol size for tailored treatment. Specifically, the treatment of severe asthmatic subjects who have constricted airways with inhalation aerosols may need submicron-sized hygroscopic particles to compensate for particle growth, if one targets for delivering to the peripheral region. These results could potentially inform the choice of particle size for inhalational drug delivery in a cluster-specific manner.

Association of Dysanapsis With Chronic Obstructive Pulmonary Disease Among Older Adults.

Importance: Smoking is a major risk factor for chronic obstructive pulmonary disease (COPD), yet much of COPD risk remains unexplained. Objective: To determine whether dysanapsis, a mismatch of airway tree caliber to lung size, assessed by computed tomography (CT), is associated with incident COPD among older adults and lung function decline in COPD. Design, Setting, and Participants: A retrospective cohort study of 2 community-based samples: the Multi-Ethnic Study of Atherosclerosis (MESA) Lung Study, which involved 2531 participants (6 US sites, 2010-2018) and the Canadian Cohort of Obstructive Lung Disease (CanCOLD), which involved 1272 participants (9 Canadian sites, 2010-2018), and a case-control study of COPD: the Subpopulations and Intermediate Outcome Measures in COPD Study (SPIROMICS), which involved 2726 participants (12 US sites, 2011-2016). Exposures: Dysanapsis was quantified on CT as the geometric mean of airway lumen diameters measured at 19 standard anatomic locations divided by the cube root of lung volume (airway to lung ratio). Main Outcomes and Measures: Primary outcome was COPD defined by postbronchodilator ratio of forced expired volume in the first second to vital capacity (FEV1:FVC) less than 0.70 with respiratory symptoms. Secondary outcome was longitudinal lung function. All analyses were adjusted for demographics and standard COPD risk factors (primary and secondhand tobacco smoke exposures, occupational and environmental pollutants, and asthma). Results: In the MESA Lung sample (mean [SD] age, 69 years [9 years]; 1334 women [52.7%]), 237 of 2531 participants (9.4%) had prevalent COPD, the mean (SD) airway to lung ratio was 0.033 (0.004), and the mean (SD) FEV1 decline was -33 mL/y (31 mL/y). Of 2294 MESA Lung participants without prevalent COPD, 98 (4.3%) had incident COPD at a median of 6.2 years. Compared with participants in the highest quartile of airway to lung ratio, those in the lowest had a significantly higher COPD incidence (9.8 vs 1.2 cases per 1000 person-years; rate ratio [RR], 8.12; 95% CI, 3.81 to 17.27; rate difference, 8.6 cases per 1000 person-years; 95% CI, 7.1 to 9.2; P < .001) but no significant difference in FEV1 decline (-31 vs -33 mL/y; difference, 2 mL/y; 95% CI, -2 to 5; P = .30). Among CanCOLD participants (mean [SD] age, 67 years [10 years]; 564 women [44.3%]), 113 of 752 (15.0%) had incident COPD at a median of 3.1 years and the mean (SD) FEV1 decline was -36 mL/y (75 mL/y). The COPD incidence in the lowest airway to lung quartile was significantly higher than in the highest quartile (80.6 vs 24.2 cases per 1000 person-years; RR, 3.33; 95% CI, 1.89 to 5.85; rate difference, 56.4 cases per 1000 person-years; 95% CI, 38.0 to 66.8; P<.001), but the FEV1 decline did not differ significantly (-34 vs -36 mL/y; difference, 1 mL/y; 95% CI, -15 to 16; P=.97). Among 1206 SPIROMICS participants (mean [SD] age, 65 years [8 years]; 542 women [44.9%]) with COPD who were followed up for a median 2.1 years, those in the lowest airway to lung ratio quartile had a mean FEV1 decline of -37 mL/y (15 mL/y), which did not differ significantly from the decline in MESA Lung participants (P = .98), whereas those in highest quartile had significantly faster decline than participants in MESA Lung (-55 mL/y [16 mL/y ]; difference, -17 mL/y; 95% CI, -32 to -3; P = .004). Conclusions and Relevance: Among older adults, dysanapsis was significantly associated with COPD, with lower airway tree caliber relative to lung size associated with greater COPD risk. Dysanapsis appears to be a risk factor associated with COPD.

Imaging-based clusters in former smokers of the COPD cohort associate with clinical characteristics: the SubPopulations and intermediate outcome measures in COPD study (SPIROMICS).

BACKGROUND: Quantitative computed tomographic (QCT) imaging-based metrics enable to quantify smoking induced disease alterations and to identify imaging-based clusters for current smokers. We aimed to derive clinically meaningful sub-groups of former smokers using dimensional reduction and clustering methods to develop a new way of COPD phenotyping. METHODS: An imaging-based cluster analysis was performed for 406 former smokers with a comprehensive set of imaging metrics including 75 imaging-based metrics. They consisted of structural and functional variables at 10 segmental and 5 lobar locations. The structural variables included lung shape, branching angle, airway-circularity, airway-wall-thickness, airway diameter; the functional variables included regional ventilation, emphysema percentage, functional small airway disease percentage, Jacobian (volume change), anisotropic deformation index (directional preference in volume change), and tissue fractions at inspiration and expiration. RESULTS: We derived four distinct imaging-based clusters as possible phenotypes with the sizes of 100, 80, 141, and 85, respectively. Cluster 1 subjects were asymptomatic and showed relatively normal airway structure and lung function except airway wall thickening and moderate emphysema. Cluster 2 subjects populated with obese females showed an increase of tissue fraction at inspiration, minimal emphysema, and the lowest progression rate of emphysema. Cluster 3 subjects populated with older males showed small airway narrowing and a decreased tissue fraction at expiration, both indicating air-trapping. Cluster 4 subjects populated with lean males were likely to be severe COPD subjects showing the highest progression rate of emphysema. CONCLUSIONS: QCT imaging-based metrics for former smokers allow for the derivation of statistically stable clusters associated with unique clinical characteristics. This approach helps better categorization of COPD sub-populations; suggesting possible quantitative structural and functional phenotypes.

Lumen area change (Delta Lumen) between inspiratory and expiratory multidetector computed tomography as a measure of severe outcomes in asthmatic patients.

BACKGROUND: Quantitative computed tomographic (QCT) biomarkers of airway morphology hold potential for understanding and monitoring regional airway remodeling in asthmatic patients. OBJECTIVE: We sought to determine whether the change in airway lumen area between total lung capacity (TLC) and functional residual capacity (FRC) lung volumes measured from CT imaging data was correlated with severe outcomes in asthmatic patients. METHODS: We studied 152 asthmatic patients (90 female and 62 male patients) and 33 healthy subjects (12 female and 21 male subjects) using QCT. Postprocessing of airways at generations 1 to 5 (1 = trachea) was performed for wall area percentage, wall thickness percentage (WT%), lumen area at baseline total lung capacity (LATLC), lumen area at baseline functional residual capacity (LAFRC), and low attenuation area at FRC. A new metric (reflecting remodeling, distal air trapping, or both), Delta Lumen, was determined as follows: Percentage difference in lumen area (LATLC - LAFRC)/LATLC × 100. RESULTS: Postprocessing of 4501 airway segments was performed (3681 segments in the 152 patients with asthma and 820 segments in the 33 healthy subjects; range, 17-28 segments per subject). Delta Lumen values were negatively correlated with WT% and low attenuation area (P < .01) in asthmatic patients. Delta Lumen values were significantly lower for airway generations 3 to 5 (segmental airways) in subjects undergoing hospitalization because of exacerbation and in patients with refractory asthma requiring treatment with systemic corticosteroids. WT% and low attenuation area were positively and Delta Lumen values were negatively associated with systemic corticosteroid treatment (P < .05), suggesting that a reduced Delta Lumen value is a potential outcome biomarker in patients with severe asthma. CONCLUSION: Reduced Delta Lumen value in the central airways measured by using QCT is a promising exploratory biomarker of unstable refractory asthma that warrants further study.

Imaging-based clusters in current smokers of the COPD cohort associate with clinical characteristics: the SubPopulations and Intermediate Outcome Measures in COPD Study (SPIROMICS).

BACKGROUND: Classification of COPD is usually based on the severity of airflow, which may not sensitively differentiate subpopulations. Using a multiscale imaging-based cluster analysis (MICA), we aim to identify subpopulations for current smokers with COPD. METHODS: Among the SPIROMICS subjects, we analyzed computed tomography images at total lung capacity (TLC) and residual volume (RV) of 284 current smokers. Functional variables were derived from registration of TLC and RV images, e.g. functional small airways disease (fSAD%). Structural variables were assessed at TLC images, e.g. emphysema and airway wall thickness and diameter. We employed an unsupervised method for clustering. RESULTS: Four clusters were identified. Cluster 1 had relatively normal airway structures; Cluster 2 had an increase of fSAD% and wall thickness; Cluster 3 exhibited a further increase of fSAD% but a decrease of wall thickness and airway diameter; Cluster 4 had a significant increase of fSAD% and emphysema. Clinically, Cluster 1 showed normal FEV1/FVC and low exacerbations. Cluster 4 showed relatively low FEV1/FVC and high exacerbations. While Cluster 2 and Cluster 3 showed similar exacerbations, Cluster 2 had the highest BMI among all clusters. CONCLUSIONS: Association of imaging-based clusters with existing clinical metrics suggests the sensitivity of MICA in differentiating subpopulations.

An integrated mathematical epithelial cell model for airway surface liquid regulation by mechanical forces.

A robust method based on reverse engineering was utilized to construct the ion-channel conductance functions for airway epithelial sodium channels (ENaC), the cystic fibrosis transmembrane conductance regulator (CFTR), and calcium-activated chloride channels (CaCC). The ion-channel conductance models for both normal (NL) and cystic fibrosis (CF) airway epithelia were developed and then coupled to an adenosine triphosphate (ATP) metabolism model and a fluid transport model (collectively called the integrated cell model) to investigate airway surface liquid (ASL) volume regulation and hence mucus concentration, by mechanical forces in NL and CF human airways. The epithelial cell models for NL and CF required differences in Cl- secretion (decreased in CF) and Na+ absorption (raised in CF) to reproduce behaviors similar to in vitro epithelial cells exposed to mechanical forces (cyclic shear stress, cyclic compressive pressure and cilial strain) and selected modulators of ion channels and ATP release. The epithelial cell models were then used to investigate the effects of mechanical forces and evaporative flux on ASL and mucus homeostasis in both NL and CF airway epithelia. Because of reduced CF ASL volumes, CF mucus concentrations increased and produced a greater dependence of ASL volume regulation on cilia-mucus-ATP release interactions in CF than NL epithelial nodules. Similarly, the CF model was less tolerant to evaporation induced ASL volume reduction at all ATP release rates than the NL model. Consequently, this reverse engineered model appears to provide a robust tool for investigating CF pathophysiology and novel therapies.

Contributions of Kinetic Energy and Viscous Dissipation to Airway Resistance in Pulmonary Inspiratory and Expiratory Airflows in Successive Symmetric Airway Models With Various Bifurcation Angles.

The aim of this study was to investigate and quantify contributions of kinetic energy and viscous dissipation to airway resistance during inspiration and expiration at various flow rates in airway models of different bifurcation angles. We employed symmetric airway models up to the 20th generation with the following five different bifurcation angles at a tracheal flow rate of 20 L/min: 15 deg, 25 deg, 35 deg, 45 deg, and 55 deg. Thus, a total of ten computational fluid dynamics (CFD) simulations for both inspiration and expiration were conducted. Furthermore, we performed additional four simulations with tracheal flow rate values of 10 and 40 L/min for a bifurcation angle of 35 deg to study the effect of flow rate on inspiration and expiration. Using an energy balance equation, we quantified contributions of the pressure drop associated with kinetic energy and viscous dissipation. Kinetic energy was found to be a key variable that explained the differences in airway resistance on inspiration and expiration. The total pressure drop and airway resistance were larger during expiration than inspiration, whereas wall shear stress and viscous dissipation were larger during inspiration than expiration. The dimensional analysis demonstrated that the coefficients of kinetic energy and viscous dissipation were strongly correlated with generation number. In addition, the viscous dissipation coefficient was significantly correlated with bifurcation angle and tracheal flow rate. We performed multiple linear regressions to determine the coefficients of kinetic energy and viscous dissipation, which could be utilized to better estimate the pressure drop in broader ranges of successive bifurcation structures.

Quantitative computed tomographic imaging-based clustering differentiates asthmatic subgroups with distinctive clinical phenotypes.

BACKGROUND: Imaging variables, including airway diameter, wall thickness, and air trapping, have been found to be important metrics when differentiating patients with severe asthma from those with nonsevere asthma and healthy subjects. OBJECTIVE: The objective of this study was to identify imaging-based clusters and to explore the association of the clusters with existing clinical metrics. METHODS: We performed an imaging-based cluster analysis using quantitative computed tomography-based structural and functional variables extracted from the respective inspiration and expiration scans of 248 asthmatic patients. The imaging-based metrics included a broader set of multiscale variables, such as inspiratory airway dimension, expiratory air trapping, and registration-based lung deformation (inspiration vs expiration). Asthma subgroups derived from a clustering method were associated with subject demographics, questionnaire results, medication history, and biomarker variables. RESULTS: Cluster 1 was composed of younger patients with early-onset nonsevere asthma and reversible airflow obstruction and normal airway structure. Cluster 2 was composed of patients with a mix of patients with nonsevere and severe asthma with marginal inflammation who exhibited airway luminal narrowing without wall thickening. Clusters 3 and 4 were dominated by patients with severe asthma. Cluster 3 patients were obese female patients with reversible airflow obstruction who exhibited airway wall thickening without airway narrowing. Cluster 4 patients were late-onset older male subjects with persistent airflow obstruction who exhibited significant air trapping and reduced regional deformation. Cluster 3 and 4 patients also showed decreased lymphocyte and increased neutrophil counts, respectively. CONCLUSIONS: Four image-based clusters were identified and shown to be correlated with clinical characteristics. Such clustering serves to differentiate asthma subgroups that can be used as a basis for the development of new therapies.

Detection of smoothly distributed spatial outliers, with applications to identifying the distribution of parenchymal hyperinflation following an airway challenge in asthmatics.

Methacholine challenge tests are used to measure changes in pulmonary function that indicate symptoms of asthma. In addition to pulmonary function tests, which measure global changes in pulmonary function, computed tomography images taken at full inspiration before and after administration of methacholine provide local air volume changes (hyper-inflation post methacholine) at individual acinar units, indicating local airway hyperresponsiveness. Some of the acini may have extreme air volume changes relative to the global average, indicating hyperresponsiveness, and those extreme values may occur in clusters. We propose a Gaussian mixture model with a spatial smoothness penalty to improve prediction of hyperresponsive locations that occur in spatial clusters. A simulation study provides evidence that the spatial smoothness penalty improves prediction under different data-generating mechanisms. We apply this method to computed tomography data from Seoul National University Hospital on five healthy and ten asthmatic subjects. Copyright © 2017 John Wiley & Sons, Ltd.

Numerical simulations of aerosol delivery to the human lung with an idealized laryngeal model, image-based airway model, and automatic meshing algorithm.

The authors proposed a new method to automatically mesh computed tomography (CT)-based three-dimensional human airway geometry for computational fluid dynamics (CFD)-based simulations of pulmonary gas-flow and aerosol delivery. Traditional methods to construct and mesh realistic geometry were time-consuming, because they were done manually using image-processing and mesh-generating programs. Furthermore, most of CT thoracic image data sets do not include the upper airway structures. To overcome these issues, the proposed method consists of CFD grid-size distribution, an automatic meshing algorithm, and the addition of a laryngeal model along with turbulent velocity inflow boundary condition attached to the proximal end of the trachea. The method is based on our previously developed geometric model with irregular centerlines and cross-sections fitted to CT segmented airway surfaces, dubbed the "fitted-surface model." The new method utilizes anatomical information obtained from the one-dimensional tree, e.g., skeleton connectivity and branch diameters, to efficiently generate optimal CFD mesh, automatically impose boundary conditions, and systematically reduce simulation results. The aerosol deposition predicted by the proposed method agreed well with the prediction by a traditional CT-based model, and the laryngeal model generated a realistic level of turbulence in the trachea. Furthermore, the computational time was reduced by factor of two without losing accuracy by using the proposed grid-size distribution. The new method is well suited for branch-by-branch analyses of gas-flow and aerosol distribution in multiple subjects due to embedded anatomical information.

Effect of static vs. dynamic imaging on particle transport in CT-based numerical models of human central airways.

Advances in quantitative computed tomography (CT) has provided methods to assess the detailed structure of the pulmonary airways and parenchyma, providing the means of applying computational fluid dynamics-based modeling to better understand subject-specific differences in structure-to-function relationships. Most of the previous numerical studies, seeking to predict patterns of inhaled particle deposition, have considered airway geometry and regional ventilation derived from static images. Because geometric alterations of the airway and parenchyma associated with regional ventilation may greatly affect particle transport, we have sought to investigate the effect of rigid vs. deforming airways, linear vs. nonlinear airway deformations, and step-wise static vs. dynamic imaging on particle deposition with varying numbers of intermediate lung volume increments. Airway geometry and regional ventilation at different time points were defined by four-dimensional (space and time) dynamic or static CT images. Laminar, transitional, and turbulent air flows were reproduced with a three-dimensional eddy-resolving computational fluid dynamics model. Finally, trajectories of particles were computed with the Lagrangian tracking algorithm. The results demonstrated that static-imaging-based models can contribute 7% uncertainty to overall particle distribution and deposition primarily due to regional flow rate (ventilation) differences as opposed to geometric alterations. The effect of rigid vs. deforming airways on serial distribution of particles over generations was significantly smaller than reported in a previous study that used the symmetric Weibel geometric model with smaller flow rate. Rigid vs. deforming airways were also shown to affect parallel particle distribution over lobes by 8% and the differences associated with use of static vs. dynamic imaging was 18%. These differences demonstrate that estimates derived from static vs. dynamic imaging can significantly affect the assessment of particle distribution heterogeneity. The effect of linear vs. nonlinear airway deformations was within the uncertainty due to mesh size.

Exploratory Study on COPD Phenotypes and their Progression: Integrating SPECT and qCT Imaging Analysis.

Background: The objective of this study is to understand chronic obstructive pulmonary disease (COPD) phenotypes and their progressions by quantifying heterogeneities of lung ventilation from the single photon emission computed tomography (SPECT) images and establishing associations with the quantitative computed tomography (qCT) imaging-based clusters and variables. Methods: Eight COPD patients completed a longitudinal study of three visits with intervals of about a year. CT scans of these subjects at residual volume, functional residual capacity, and total lung capacity were taken for all visits. The functional and structural qCT-based variables were derived, and the subjects were classified into the qCT-based clusters. In addition, the SPECT variables were derived to quantify the heterogeneity of lung ventilation. The correlations between the key qCT-based variables and SPECT-based variables were examined. Results: The SPECT-based coefficient of variation (CVTotal), a measure of ventilation heterogeneity, showed strong correlations (|r| ≥ 0.7) with the qCT-based functional small airway disease percentage (fSAD%Total) and emphysematous tissue percentage (Emph%Total) in the total lung on cross-sectional data. As for the two-year changes, the SPECT-based maximum tracer concentration (TCmax), a measure of hot spots, exhibited strong negative correlations with fSAD%Total, Emph%Total, average airway diameter in the left upper lobe, and airflow distribution in the middle and lower lobes. Conclusion: Small airway disease is highly associated with the heterogeneity of ventilation in COPD lungs. TCmax is a more sensitive functional biomarker for COPD progression than CVTotal. Besides fSAD%Total and Emph%Total, segmental airways narrowing and imbalanced ventilation between upper and lower lobes may contribute to the development of hot spots over time.

Investigating distributions of inhaled aerosols in the lungs of post-COVID-19 clusters through a unified imaging and modeling approach.

BACKGROUND: Recent studies, based on clinical data, have identified sex and age as significant factors associated with an increased risk of long COVID. These two factors align with the two post-COVID-19 clusters identified by a deep learning algorithm in computed tomography (CT) lung scans: Cluster 1 (C1), comprising predominantly females with small airway diseases, and Cluster 2 (C2), characterized by older individuals with fibrotic-like patterns. This study aims to assess the distributions of inhaled aerosols in these clusters. METHODS: 140 COVID survivors examined around 112 days post-diagnosis, along with 105 uninfected, non-smoking healthy controls, were studied. Their demographic data and CT scans at full inspiration and expiration were analyzed using a combined imaging and modeling approach. A subject-specific CT-based computational model analysis was utilized to predict airway resistance and particle deposition among C1 and C2 subjects. The cluster-specific structure and function relationships were explored. RESULTS: In C1 subjects, distinctive features included airway narrowing, a reduced homothety ratio of daughter over parent branch diameter, and increased airway resistance. Airway resistance was concentrated in the distal region, with a higher fraction of particle deposition in the proximal airways. On the other hand, C2 subjects exhibited airway dilation, an increased homothety ratio, reduced airway resistance, and a shift of resistance concentration towards the proximal region, allowing for deeper particle penetration into the lungs. CONCLUSIONS: This study revealed unique mechanistic phenotypes of airway resistance and particle deposition in the two post-COVID-19 clusters. The implications of these findings for inhaled drug delivery effectiveness and susceptibility to air pollutants were explored.

Human-airway surface mesh smoothing based on graph convolutional neural networks.

BACKGROUND AND OBJECTIVE: A detailed representation of the airway geometry in the respiratory system is critical for predicting precise airflow and pressure behaviors in computed tomography (CT)-image-based computational fluid dynamics (CFD). The CT-image-based geometry often contains artifacts, noise, and discontinuities due to the so-called stair step effect. Hence, an advanced surface smoothing is necessary. The existing smoothing methods based on the Laplacian operator drastically shrink airway geometries, resulting in the loss of information related to smaller branches. This study aims to introduce an unsupervised airway-mesh-smoothing learning (AMSL) method that preserves the original geometry of the three-dimensional (3D) airway for accurate CT-image-based CFD simulations. METHOD: The AMSL method jointly trains two graph convolutional neural networks (GCNNs) defined on airway meshes to filter vertex positions and face normal vectors. In addition, it regularizes a combination of loss functions such as reproducibility, smoothness and consistency of vertex positions, and normal vectors. The AMSL adopts the concept of a deep mesh prior model, and it determines the self-similarity for mesh restoration without using a large dataset for training. Images of the airways of 20 subjects were smoothed by the AMSL method, and among them, the data of two subjects were used for the CFD simulations to assess the effect of airway smoothing on flow properties. RESULTS: In 18 of 20 benchmark problems, the proposed smoothing method delivered better results compared with the conventional or state-of-the-art deep learning methods. Unlike the traditional smoothing, the AMSL successfully constructed 20 smoothed airways with airway diameters that were consistent with the original CT images. Besides, CFD simulations with the airways obtained by the AMSL method showed much smaller pressure drop and wall shear stress than the results obtained by the traditional method. CONCLUSIONS: The airway model constructed by the AMSL method reproduces branch diameters accurately without any shrinkage, especially in the case of smaller airways. The accurate estimation of airway geometry using a smoothing method is critical for estimating flow properties in CFD simulations.

Transport and deposition of beclomethasone dipropionate drug aerosols with varying ethanol concentration in severe asthmatic subjects.

This study aims to assess the effects of varying an ethanol co-solvent on the deposition of drug particles in severe asthmatic subjects with distinct airway structures and lung functions using computational fluid dynamics. The subjects were selected from two quantitative computed tomography imaging-based severe asthmatic clusters, differentiated by airway constriction in the left lower lobe. Drug aerosols were assumed to be generated from a pressurized metered-dose inhaler (MDI). The aerosolized droplet sizes were varied by increasing the ethanol co-solvent concentration in the MDI solution. The MDI formulation consists of 1,1,2,2-tetrafluoroethane (HFA-134a), ethanol, and beclomethasone dipropionate (BDP) as the active pharmaceutical ingredient. Since HFA-134a and ethanol are volatile, both substances evaporate rapidly under ambient conditions and trigger condensation of water vapor, increasing the size of aerosols that are predominantly composed of water and BDP. The average deposition fraction in intra-thoracic airways for severe asthmatic subjects with (or without) airway constriction increased from 37%±12 to 53.2%±9.4 (or from 20.7%± 4.6 to 34.7%±6.6) when the ethanol concentration was increased from 1 to 10%wt/wt. However, when the ethanol concentration was further increased from 10 to 20%wt/wt, the deposition fraction decreased. This indicates the importance of selecting appropriate co-solvent amounts during drug formulation development for the treatment of patients with narrowed airway disease. For severe asthmatic subjects with airway narrowing, the inhaled aerosol may benefit from a low hygroscopic effect by reducing ethanol concentration to penetrate the peripheral region effectively. These results could potentially inform the selection of co-solvent amounts for inhalation therapies in a cluster-specific manner.

Contrastive learning and subtyping of post-COVID-19 lung computed tomography images.

Patients who recovered from the novel coronavirus disease 2019 (COVID-19) may experience a range of long-term symptoms. Since the lung is the most common site of the infection, pulmonary sequelae may present persistently in COVID-19 survivors. To better understand the symptoms associated with impaired lung function in patients with post-COVID-19, we aimed to build a deep learning model which conducts two tasks: to differentiate post-COVID-19 from healthy subjects and to identify post-COVID-19 subtypes, based on the latent representations of lung computed tomography (CT) scans. CT scans of 140 post-COVID-19 subjects and 105 healthy controls were analyzed. A novel contrastive learning model was developed by introducing a lung volume transform to learn latent features of disease phenotypes from CT scans at inspiration and expiration of the same subjects. The model achieved 90% accuracy for the differentiation of the post-COVID-19 subjects from the healthy controls. Two clusters (C1 and C2) with distinct characteristics were identified among the post-COVID-19 subjects. C1 exhibited increased air-trapping caused by small airways disease (4.10%, p = 0.008) and diffusing capacity for carbon monoxide %predicted (DLCO %predicted, 101.95%, p < 0.001), while C2 had decreased lung volume (4.40L, p < 0.001) and increased ground glass opacity (GGO%, 15.85%, p < 0.001). The contrastive learning model is able to capture the latent features of two post-COVID-19 subtypes characterized by air-trapping due to small airways disease and airway-associated interstitial fibrotic-like patterns, respectively. The discovery of post-COVID-19 subtypes suggests the need for different managements and treatments of long-term sequelae of patients with post-COVID-19.

CT-based lung motion differences in patients with usual interstitial pneumonia and nonspecific interstitial pneumonia.

We applied quantitative CT image matching to assess the degree of motion in the idiopathic ILD such as usual interstitial pneumonia (UIP) and nonspecific interstitial pneumonia (NSIP). Twenty-one normal subjects and 42 idiopathic ILD (31 UIP and 11 NSIP) patients were retrospectively included. Inspiratory and expiratory CT images, reviewed by two experienced radiologists, were used to compute displacement vectors at local lung regions matched by image registration. Normalized three-dimensional and two-dimensional (dorsal-basal) displacements were computed at a sub-acinar scale. Displacements, volume changes, and tissue fractions in the whole lung and the lobes were compared between normal, UIP, and NSIP subjects. The dorsal-basal displacement in lower lobes was smaller in UIP patients than in NSIP or normal subjects (p = 0.03, p = 0.04). UIP and NSIP were not differentiated by volume changes in the whole lung or upper and lower lobes (p = 0.53, p = 0.12, p = 0.97), whereas the lower lobe air volume change was smaller in both UIP and NSIP than normal subjects (p = 0.02, p = 0.001). Regional expiratory tissue fractions and displacements showed positive correlations in normal and UIP subjects but not in NSIP subjects. In summary, lung motionography quantified by image registration-based lower lobe dorsal-basal displacement may be used to assess the degree of motion, reflecting limited motion due to fibrosis in the ILD such as UIP and NSIP.