Open-channel metal particle superlattices.

Although tremendous advances have been made in preparing porous crystals from molecular precursors1,2, there are no general ways of designing and making topologically diversified porous colloidal crystals over the 10-1,000 nm length scale. Control over porosity in this size range would enable the tailoring of molecular absorption and storage, separation, chemical sensing, catalytic and optical properties of such materials. Here, a universal approach for synthesizing metallic open-channel superlattices with pores of 10 to 1,000 nm from DNA-modified hollow colloidal nanoparticles (NPs) is reported. By tuning hollow NP geometry and DNA design, one can adjust crystal pore geometry (pore size and shape) and channel topology (the way in which pores are interconnected). The assembly of hollow NPs is driven by edge-to-edge rather than face-to-face DNA-DNA interactions. Two new design rules describing this assembly regime emerge from these studies and are then used to synthesize 12 open-channel superlattices with control over crystal symmetry, channel geometry and topology. The open channels can be selectively occupied by guests of the appropriate size and that are modified with complementary DNA (for example, Au NPs).

Colloidal quasicrystals engineered with DNA.

In principle, designing and synthesizing almost any class of colloidal crystal is possible. Nonetheless, the deliberate and rational formation of colloidal quasicrystals has been difficult to achieve. Here we describe the assembly of colloidal quasicrystals by exploiting the geometry of nanoscale decahedra and the programmable bonding characteristics of DNA immobilized on their facets. This process is enthalpy-driven, works over a range of particle sizes and DNA lengths, and is made possible by the energetic preference of the system to maximize DNA duplex formation and favour facet alignment, generating local five- and six-coordinated motifs. This class of axial structures is defined by a square-triangle tiling with rhombus defects and successive on-average quasiperiodic layers exhibiting stacking disorder which provides the entropy necessary for thermodynamic stability. Taken together, these results establish an engineering milestone in the deliberate design of programmable matter.

A Biphasic Strategy to Synergistically Accelerate Activation and CO Spillover in Formic Acid Oxidation Catalysis.

Developing highly efficient and carbon monoxide (CO)-tolerant platinum (Pt) catalysts for the formic acid oxidation reaction (FAOR) is vital for direct formic acid fuel cells (DFAFCs), yet it is challenging due to the high energy barrier of direct intermediates (HCOO* and COOH*) as well as the CO poisoning issues associated with Pt alloy catalysts. Here we present a versatile biphasic strategy by creating a hexagonal/cubic crystalline-phase-synergistic PtPb/C (h/c-PtPb/C) catalyst to tackle the aforementioned issues. Detailed investigations reveal that h/c-PtPb/C can simultaneously facilitate the adsorption of direct intermediates while inhibiting CO adsorption, thereby significantly improving the activation and CO spillover. As a result, h/c-PtPb/C showcases an outstanding FAOR activity of 8.1 A mgPt-1, which is 64.5 times higher than that of commercial Pt/C and significantly surpasses monophasic PtPb. Moreover, the h/c-PtPb/C-based membrane electrode assembly exhibits an exceptional peak power density of 258.7 mW cm-2 for practical DFAFC applications.

What Elements Really Intercalate into Pd Lattice When Heated in Dimethylformamide?

Palladium hydrides (PdHx) are pivotal in both fundamental research and practical applications across a wide spectrum. PdHx nanocrystals, synthesized by heating in dimethylformamide (DMF), exhibit remarkable stability, granting them widespread applications in the field of electrocatalysis. However, this stability appears inconsistent with their metastable nature. The substantial challenges in characterizing nanoscale structures contribute to the limited understanding of this anomalous phenomenon. Here, through a series of well-conceived experimental designs and advanced characterization techniques, including aberration-corrected scanning transmission electron microscopy (AC-STEM), in situ X-ray diffraction (XRD), and time-of-flight secondary ion mass spectrometry (TOF-SIMS), we have uncovered evidence that indicates the presence of C and N within the lattice of Pd (PdCxNy), rather than H (PdHx). By combining theoretical calculations, we have thoroughly studied the potential configurations and thermodynamic stability of PdCxNy, demonstrating a 2.5:1 ratio of C to N infiltration into the Pd lattice. Furthermore, we successfully modulated the electronic structure of Pd nanocrystals through C and N doping, enhancing their catalytic activity in methanol oxidation reactions. This breakthrough provides a new perspective on the structure and composition of Pd-based nanocrystals infused with light elements, paving the way for the development of advanced catalytic materials in the future.

Tuning Crystal Phase of Palladium-Selenium Nanowires for Enhanced Ethylene Glycol Electrocatalytic Oxidation.

Alcohol electrooxidation is pivotal for a sustainable energy economy. However, designing efficient electrocatalysts for this process is still a formidable challenge. Herein, palladium-selenium nanowires featuring distinct crystal phases: monoclinic Pd7Se2 and tetragonal Pd4.5Se for ethylene glycol electrooxidation reaction (EGOR) are synthesized. Notably, the supported monoclinic Pd7Se2 nanowires (m-Pd7Se2 NWs/C) exhibit superior EGOR activity, achieving a mass activity (MA) and specific activity (SA) of 10.4 A mgPd -1 (18.7 mA cm-2), which are 8.0 (6.7) and 10.4 (8.2) times versus the tetragonal Pd4.5Se and commercial Pd/C and surpass those reported in the literature. Furthermore, m-Pd7Se2 NWs/C displays robust catalytic activity for other alcohol electrooxidation. Comprehensive characterization and density functional theory (DFT) calculations reveal that the enhanced electrocatalytic performance is attributed to the increased formation of Pd0 on the high-index facets of the m-Pd7Se2 NWs, which lowers the energy barriers for the C─C bond dissociation in CHOHCHOH* and the CO* oxidation to CO2*. This study provides palladium-based alloy electrocatalysts exhibiting the highest mass activity reported to date for the electrooxidation of ethylene glycol, achieved through the crystalline phase engineering strategy.

Ga-Modification Near-Surface Composition of Pt-Ga/C Catalyst Facilitates High-Efficiency Electrochemical Ethanol Oxidation through a C2 Intermediate.

In electrochemical ethanol oxidation reactions (EOR) catalyzed by Pt metal nanoparticles through a C2 route, the dissociation of the C-C bond in the ethanol molecule can be a limiting factor. Complete EOR processes producing CO2 were always exemplified by the oxidative dehydrogenation of C1 intermediates, a reaction route with less energy utilization efficiency. Here, we report a Pt3Ga/C electrocatalyst with a uniform distribution of Ga over the nanoparticle surface for EOR that produces CO2 at medium potentials (>0.3 V vs SCE) efficiently through direct and sustainable oxidation of C2 intermediate species, i.e., acetaldehyde. We demonstrate the excellent performance of the Pt3Ga-200/C catalyst by using electrochemical in situ Fourier transform infrared reflection spectroscopy (FTIR) and an isotopic labeling method. The atomic interval structure between Pt and Ga makes the surface of nanoparticles nonensembled, avoiding the formation of poisonous *CHx and *CO species via bridge-type adsorption of ethanol molecules. Meanwhile, the electron redistribution from Ga to Pt diminishes the *O/*OH adsorption and CO poisoning on Pt atoms, exposing more available sites for interaction with the C2 intermediates. Furthermore, the dissociation of H2O into *OH is facilitated by the high hydrophilicity of Ga, which is supported by DFT calculations, promoting the deep oxidation of C2 intermediates. Our work represents an extremely rare EOR process that produces CO2 without observing kinetic limitations under medium potential conditions.

Device-quality, reconfigurable metamaterials from shape-directed nanocrystal assembly.

Anchoring nanoscale building blocks, regardless of their shape, into specific arrangements on surfaces presents a significant challenge for the fabrication of next-generation chip-based nanophotonic devices. Current methods to prepare nanocrystal arrays lack the precision, generalizability, and postsynthetic robustness required for the fabrication of device-quality, nanocrystal-based metamaterials [Q. Y. Lin et al. Nano Lett. 15, 4699-4703 (2015); V. Flauraud et al., Nat. Nanotechnol. 12, 73-80 (2017)]. To address this challenge, we have developed a synthetic strategy to precisely arrange any anisotropic colloidal nanoparticle onto a substrate using a shallow-template-assisted, DNA-mediated assembly approach. We show that anisotropic nanoparticles of virtually any shape can be anchored onto surfaces in any desired arrangement, with precise positional and orientational control. Importantly, the technique allows nanoparticles to be patterned over a large surface area, with interparticle distances as small as 4 nm, providing the opportunity to exploit light-matter interactions in an unprecedented manner. As a proof-of-concept, we have synthesized a nanocrystal-based, dynamically tunable metasurface (an anomalous reflector), demonstrating the potential of this nanoparticle-based metamaterial synthesis platform.

Regioselective Deposition of Metals on Seeds within a Polymer Matrix.

We use scanning probe block copolymer lithography in a two-step sequential manner to explore the deposition of secondary metals on nanoparticle seeds. When single element nanoparticles (Au, Ag, Cu, Co, or Ni) were used as seeds, both heterogeneous and homogeneous growth occurred, as rationalized using the thermodynamic concepts of bond strength and lattice mismatch. Specifically, heterogeneous growth occurs when the heterobond strength between the seed and growth atoms is stronger than the homobond strength between the growth atoms. Moreover, the resulting nanoparticle structure depends on the degree of lattice mismatch between the seed and growth metals. Specifically, a large lattice mismatch (e.g., 13.82% for Au and Ni) typically resulted in heterodimers, whereas a small lattice mismatch (e.g., 0.19% for Au and Ag) resulted in core-shell structures. Interestingly, when heterodimer nanoparticles were used as seeds, the secondary metals deposited asymmetrically on one side of the seed. By programming the deposition conditions of Ag and Cu on AuNi heterodimer seeds, two distinct nanostructures were synthesized with (1) Ag and Cu on the Au domain and (2) Ag on the Au domain and Cu on the Ni domain, illustrating how this technique can be used to predictively synthesize structurally complex, multimetallic nanostructures.

Superlattice Engineering with Chemically Precise Molecular Building Blocks.

Correlating nanoscale building blocks with mesoscale superlattices, mimicking metal alloys, a rational engineering strategy becomes critical to generate designed periodicity with emergent properties. For molecule-based superlattices, nevertheless, nonrigid molecular features and multistep self-assembly make the molecule-to-superlattice correlation less straightforward. In addition, single component systems possess intrinsically limited volume asymmetry of self-assembled spherical motifs (also known as "mesoatoms"), further hampering novel superlattices' emergence. In the current work, we demonstrate that properly designed molecular systems could generate a spectrum of unconventional superlattices. Four categories of giant molecules are presented. We systematically explore the lattice-forming principles in unary and binary systems, unveiling how molecular stoichiometry, topology, and size differences impact the mesoatoms and further toward their superlattices. The presence of novel superlattices helps to correlate with Frank-Kasper phases previously discovered in soft matter. We envision the present work offers new insights about how complex superlattices could be rationally fabricated by scalable-preparation and easy-to-process materials.

Design principles for photonic crystals based on plasmonic nanoparticle superlattices.

Photonic crystals have been widely studied due to their broad technological applications in lasers, sensors, optical telecommunications, and display devices. Typically, photonic crystals are periodic structures of touching dielectric materials with alternating high and low refractive indices, and to date, the variables of interest have focused primarily on crystal symmetry and the refractive indices of the constituent materials, primarily polymers and semiconductors. In contrast, finite difference time domain (FDTD) simulations suggest that plasmonic nanoparticle superlattices with spacer groups offer an alternative route to photonic crystals due to the controllable spacing of the nanoparticles and the high refractive index of the lattices, even far away from the plasmon frequency where losses are low. Herein, the stopband features of 13 Bravais lattices are characterized and compared, resulting in paradigm-shifting design principles for photonic crystals. Based on these design rules, a simple cubic structure with an ∼130-nm lattice parameter is predicted to have a broad photonic stopband, a property confirmed by synthesizing the structure via DNA programmable assembly and characterizing it by reflectance measurements. We show through simulation that a maximum reflectance of more than 0.99 can be achieved in these plasmonic photonic crystals by optimizing the nanoparticle composition and structural parameters.

Multimetallic High-Index Faceted Heterostructured Nanoparticles.

Multimetallic heterostructured nanoparticles with high-index facets potentially represent an important class of highly efficient catalysts. However, due to their complexity, they are often difficult to synthesize. Herein, a library of heterostructured, multimetallic (Pt, Pd, Rh, and Au) tetrahexahedral nanoparticles was synthesized through alloying/dealloying with Bi in a tube furnace at 900-1000 °C. Electron microscopy and selected area diffraction measurements show that the domains of the heterostructured nanoparticles are epitaxially aligned. Although nanoparticles formed from Au alone exhibit low-index facets, Pt and Au form PtAu heterostructured nanoparticles with high-index facets, including domains that are primarily made of Au. Furthermore, the alloying/dealloying of Bi occurs at different rates and under different conditions within the heterostructured nanoparticles. This influences the types of architectures observed en route to the final high-index state, a phenomenon clearly observable in the case of PdRhAu nanoparticles. Finally, scanning probe block copolymer lithography was used in combination with this synthetic strategy to control nanoparticle composition in the context of PtAu nanoparticles (1:4 to 4:1 ratio range) and size (15 to 45 nm range).

Exploring the zone of anisotropy and broken symmetries in DNA-mediated nanoparticle crystallization.

In this work, we present a joint experimental and molecular dynamics simulations effort to understand and map the crystallization behavior of polyhedral nanoparticles assembled via the interaction of DNA surface ligands. In these systems, we systematically investigated the interplay between the effects of particle core (via the particle symmetry and particle size) and ligands (via the ligand length) on crystallization behavior. This investigation revealed rich phase diagrams, previously unobserved phase transitions in polyhedral crystallization behavior, and an unexpected symmetry breaking in the ligand distribution on a particle surface. To understand these results, we introduce the concept of a zone of anisotropy, or the portion of the phase space where the anisotropy of the particle is preserved in the crystallization behavior. Through comparison of the zone of anisotropy for each particle we develop a foundational roadmap to guide future investigations.

DNA-Mediated Size-Selective Nanoparticle Assembly for Multiplexed Surface Encoding.

Multiplexed surface encoding is achieved by positioning two different sizes of gold nanocubes on gold surfaces with precisely defined locations for each particle via template-confined, DNA-mediated nanoparticle assembly. As a proof-of-concept demonstration, cubes with 86 and 63 nm edge lengths are assembled into arrangements that physically and spectrally encrypt two sets of patterns in the same location. These patterns can be decrypted by mapping the absorption intensity of the substrate at λ = 773 and 687 nm, respectively. This multiplexed encoding platform dramatically increases the sophistication and density of codes that can be written using colloidal nanoparticles, which may enable high-security, high-resolution encoding applications.

pH-Responsive Nanoparticle Superlattices with Tunable DNA Bonds.

Stimuli-responsive nanomaterials with reconfigurable structures and properties have garnered significant interest in the fields of optics, electronics, magnetics, and therapeutics. DNA is a powerful and versatile building material that provides programmable structural and dynamic properties, and indeed, sequence-dependent changes in DNA have already been exploited in creating switchable DNA-based architectures. However, rather than designing a new DNA input sequence for each intended dynamic change, it would be useful to have one simple, generalized stimulus design that could provide multiple different structural outputs. In pursuit of this goal, we have designed, synthesized, and characterized pH-dependent, switchable nanoparticle superlattices by utilizing i-motif DNA structures as pH-sensitive DNA bonds. When the pH of the solution containing such superlattices is changed, the superlattices reversibly undergo: (i) a lattice expansion or contraction, a consequence of the pH-induced change in DNA length, or (ii) a change in crystal symmetry, a consequence of both pH-induced DNA "bond breaking" and "bond forming" processes. The introduction of i-motifs in DNA colloidal crystal engineering marks a significant step toward being able to dynamically modulate crystalline architectures and propagate local molecular motion into global structural change via exogenous stimuli.

Polarization-Dependent Optical Response in Anisotropic Nanoparticle-DNA Superlattices.

DNA-programmable assembly has been used to prepare superlattices composed of octahedral and spherical nanoparticles, respectively. These superlattices have the same body-centered cubic lattice symmetry and macroscopic rhombic dodecahedron crystal habit but tunable lattice parameters by virtue of the DNA length, allowing one to study and determine the effect of nanoscale structure and lattice parameter on the light-matter interactions in the superlattices. Backscattering measurements and finite-difference time-domain simulations have been used to characterize these two classes of superlattices. Superlattices composed of octahedral nanoparticles exhibit polarization-dependent backscattering but via a trend that is opposite to that observed in the polarization dependence for analogous superlattices composed of spherical nanoparticles. Electrodynamics simulations show that this polarization dependence is mainly due to the anisotropy of the nanoparticles and is observed only if the octahedral nanoparticles are well-aligned within the superlattices. Both plasmonic and photonic modes are identified in such structures, both of which can be tuned by controlling the size and shape of the nanoparticle building blocks, the lattice parameters, and the overall size of the three-dimensional superlattices (without changing habit).

Understanding the Cubic Phase Stabilization and Crystallization Kinetics in Mixed Cations and Halides Perovskite Single Crystals.

The spontaneous α-to-δ phase transition of the formamidinium-based (FA) lead halide perovskite hinders its large scale application in solar cells. Though this phase transition can be inhibited by alloying with methylammonium-based (MA) perovskite, the underlying mechanism is largely unexplored. In this Communication, we grow high-quality mixed cations and halides perovskite single crystals (FAPbI3)1-x(MAPbBr3)x to understand the principles for maintaining pure perovskite phase, which is essential to device optimization. We demonstrate that the best composition for a perfect α-phase perovskite without segregation is x = 0.1-0.15, and such a mixed perovskite exhibits carrier lifetime as long as 11.0 µs, which is over 20 times of that of FAPbI3 single crystal. Powder XRD, single crystal XRD and FT-IR results reveal that the incorporation of MA+ is critical for tuning the effective Goldschmidt tolerance factor toward the ideal value of 1 and lowering the Gibbs free energy via unit cell contraction and cation disorder. Moreover, we find that Br incorporation can effectively control the perovskite crystallization kinetics and reduce defect density to acquire high-quality single crystals with significant inhibition of δ-phase. These findings benefit the understanding of α-phase stabilization behavior, and have led to fabrication of perovskite solar cells with highest efficiency of 19.9% via solvent management.

Programming Colloidal Crystal Habit with Anisotropic Nanoparticle Building Blocks and DNA Bonds.

Colloidal crystallization can be programmed using building blocks consisting of a nanoparticle core and DNA bonds to form materials with controlled crystal symmetry, lattice parameters, stoichiometry, and dimensionality. Despite this diversity of colloidal crystal structures, only spherical nanoparticles crystallized with BCC symmetry experimentally yield single crystals with well-defined crystal habits. Here, we use low-symmetry, anisotropic nanoparticles to overcome this limitation and to access single crystals with different equilibrium Wulff shapes: a cubic habit from cube-shaped nanoparticles, a rhombic dodecahedron habit from octahedron-shaped nanoparticles, and an octahedron habit from rhombic dodecahedron-shaped nanoparticles. The observation that one can control the microscopic shape of single crystals based upon control of particle building block and crystal symmetry has important fundamental and technological implications for this novel class of colloidal matter.

Constructing two-dimensional nanoparticle arrays on layered materials inspired by atomic epitaxial growth.

Constructing nanoparticles into well-defined structures at mesoscale and larger to create novel functional materials remains a challenge. Inspired by atomic epitaxial growth, we propose an "epitaxial assembly" method to form two-dimensional nanoparticle arrays (2D NAs) directly onto desired materials. As an illustration, we employ a series of surfactant-capped nanoparticles as the "artificial atoms" and layered hybrid perovskite (LHP) materials as the substrates and obtain 2D NAs in a large area with few defects. This method is universal for nanoparticles with different shapes, sizes, and compositions and for LHP substrates with different metallic cores. Raman spectroscopic and X-ray diffraction data support our hypothesis of epitaxial assembly. The novel method offers new insights into the controllable assembly of complex functional materials and may push the development of materials science at the mesoscale.

Extraction of absorption and scattering contribution of metallic nanoparticles toward rational synthesis and application.

Noble metal nanoparticles have unique localized surface plasmon resonance (LSPR), leading to their strong absorption and scattering in the visible light range. Up to date, the common practice in the selection of nanoparticles for a specific application is still based on the measured extinction spectra. This practice may be erroneous, because the extinction spectra contain both absorption and scattering contribution that may play different roles in different applications. It would be highly desirable to develop an efficient way to obtain the absorption and scattering spectra simultaneously. Herein, we develop a method to use the experimentally measured extinction and scattering signals to extract the absorption and scattering spectra that is in excellent agreement with that simulated by discrete dipole approximation (DDA). The heating curve measurement on the three types of gold nanorods, with almost the same extinction spectra but different absorption and scattering contribution, convincingly reveals an excellent correlation between the heating effect and the absorption strength rather than the extinction strength. The result demonstrates the importance to obtain the scattering and absorption spectra to predict the potential application for different types of nanoparticles, which in turn will screen efficiently nanoparticles for a specific application.

What molecular assembly can learn from catalytic chemistry.

One important objective of molecular assembly research is to create highly complex functional chemical systems capable of responding, adapting, and evolving. Compared with living systems, the synthetic systems are still rather primitive and are far from realizing those features. Nature is by far the most important source of inspiration for designing and creating such systems. In this critical review, we summarize an alternative approach, inspired by catalysis, to examine and describe some molecular assembly processes. A new term, "catassembly," is suggested to refer to the increase in the rate and control of a molecular assembly process. This term combines the words "catalysis" and "assembly," and identifiably retains the Greek root "cat-" of catalysis. The corresponding verb is "catassemble" and the noun is "catassembler", referring to the "helper" species. Catassembly in molecular assembly is a concept that is analogous to catalysis in chemical synthesis. After using several examples to illustrate the characteristics of catassembly, we discuss future methodological and theoretical developments. We also emphasize the significance of the synergy between chemical synthesis and molecular assembly, especially for hierarchical assembly systems. Because most efforts in the field of molecular assembly have been devoted to the design and synthesis of molecular building blocks, we wish to stress the apparently missing yet critical link to complex chemical systems, i.e., the design and utilization of molecular catassemblers to facilitate the formation of functional molecular assemblies from building blocks with high efficiency and selectivity. This rational control and accelerated method will promote the systems chemistry approach, and may expand the spectrum of molecular assembly from basic science to applications.