RESUMO
For the effective clinical antibacterial application of biomaterials, such as for wound management and tissue repair, the biomaterials need to show proper antibacterial capability as well as non-cytotoxicity. Furthermore, the material needs to have suitable mechanical characteristics for further medical use. Chitosan hydrogel is a potential candidate for various antibacterial biomedical applications due to its amine functionalities that lead to antimicrobial characteristics. Nevertheless, its antimicrobial capability is dependent upon the degree of protonation of amine groups caused by the pH value. Moreover, its mechanical compressive strength may not be high enough for clinical use if not chemically or physically crosslinked. This study utilized a novel chemical crosslinker, mercaptosuccinic acid, to improve its mechanical characteristics. The natural antibacterial agent, cinnamaldehyde, was grafted onto the crosslinked chitosan to improve its antimicrobial capability. Meanwhile, to take advantage of the thiol functionality in the mercaptosuccinic acid, the bactericidal silver nanoparticles were incorporated through silver-thiol covalent bounding. NMR analyses indicated the chitosan was successfully mercaptosuccinic acid-crosslinked and grafted with cinnamaldehyde at different ratios. Combined the results from the mechanical assessment, swelling experiments, antimicrobial assessment, and cytotoxicity assay, the chitosan hydrogel with the highest crosslinked degree and grafted with cinnamaldehyde and silver nanoparticles is of great promise for further clinical uses.
Assuntos
Quitosana , Nanopartículas Metálicas , Quitosana/química , Hidrogéis/química , Prata/química , Nanopartículas Metálicas/química , Antibacterianos/farmacologia , Antibacterianos/química , Tiomalatos , AminasRESUMO
Despite of its widely uses in various clinical applications, the titanium-based material still faces different challenges, such as hemocompatibility and anti-biofouling characteristics required in various situations. The objective of this investigation was to develop a novel surface modification strategy for titanium-based material to improve the platelet compatibility that is important in rigorous blood-contacting cardiovascular applications. In this work, a series of copolymers, which composed of novel 6-acryloyloxy hexyl phosphonic acid (AcrHPA) and sulfobetaine methacrylate (SBMA) was synthesized. The phosphonic acid group in these copolymers can impart covalent binding to the titanium substrate while the zwitterionic sulfobetaine functionality is considered being able to reduce the platelet adhesion and activation on the modified titanium substrate. NMR analyses suggested that copolymerization reaction is likely not an ideal statistical reaction but to add the monomers in a random order. Studies have shown that the composition of the monomers affected the surface characteristics and platelet compatibility of these covalent-bound AcrHPA-SBMA copolymers on titanium substrate. Contact angle analysis has shown the addition of SBMA can increase surface hydrophilicity of the spun-coated copolymers. In addition, AFM analyses have revealed that the surface roughness of the spun-coated copolymer layer were varied with the ratio of AcrHPA and SBMA. The most platelet compatible surface was noted on the one modified by the highest amount of SBMA added (i.e. 70 mol%) in copolymerization. In summary, the surface modification scheme presented here would be of potential as well as manufacturing process applicable for future development in blood-contacting titanium-based biomedical devices.
Assuntos
Materiais Biocompatíveis/farmacologia , Materiais Revestidos Biocompatíveis/farmacologia , Metacrilatos/farmacologia , Ácidos Fosforosos/farmacologia , Adesividade Plaquetária/efeitos dos fármacos , Titânio/química , Materiais Biocompatíveis/síntese química , Células Cultivadas , Materiais Revestidos Biocompatíveis/síntese química , Humanos , Teste de Materiais , Metacrilatos/química , Ácidos Fosforosos/química , Adesividade Plaquetária/fisiologia , Propriedades de SuperfícieRESUMO
Medical device-associated infection remains a critical problem in the healthcare setting. Different clinical- or device-related methods have been attempted to reduce the infection rate. Among these approaches, creating a surface with bactericidal cationic functionality has been proposed. To do so, a sophisticated multi-step chemical procedure would be needed. Instead, a simple immersion approach was utilized in this investigation to render the titanium and polypropylene surface with the quaternary ammonium functionality by using a mussel-inspired novel lab-synthesized biomimetic catechol-terminated polymer, PQA-C8. The chemical oxidants, CuSO4/H2O2, as well as dopamine, were added into the novel PQA-C8 polymer immersion solution for one-step surface modification. Additionally, a two-step immersion scheme, in which the polypropylene substrate was first immersed in the dopamine solution and then in the PQA-C8 solution, was also attempted. Surface analysis results indicated the surface characteristics of the modified substrates were affected by the immersion solution formulation as well as the procedure utilized. The antibacterial assay has shown the titanium substrates modified by the one-step dopamine + PQA-C8 mixtures with the oxidants added and the polypropylene modified by the two-step scheme exhibited bacterial reduction percentages greater than 90% against both Gram-positive S. aureus and Gram-negative E. coli and these antibacterial substrates were non-cytotoxic.
RESUMO
OBJECTIVES: To investigate a near-infrared-to-blue luminescence upconversion curing method for polymerizing resin cements under zirconia discs. METHODS: Lava zirconia discs of different thicknesses (0.5-2.0 mm) were manufactured. First, the transmittances of the NIR and two blue lights (BLs) (LED and halogen lights) through these discs were measured. Second, NaYF4:Yb3+/Tm3+ upconversion phosphor (UP) powder was milled into 0.5-µm particle sizes. A light-curable resin cement VariolinkII base was chosen as the control (UP0), and an experimental cement (UP5) was prepared by adding 5 % UPs. These two cements were examined using multiphoton excitation microscopy for particle distribution. UP5 and UP0 were polymerized with or without zirconia shielding then subjected to a microhardness test. A multifold analysis was performed to examine the effects of zirconia thickness, curing protocols (pure BL or combined BL and NIR curing), and cement type. RESULTS: The transmittance of NIR was superior to that of BL through zirconia discs of all thicknesses. UP particles were homogeneously distributed in UP5 and emitted blue luminescence under 980-nm NIR excitation. UP5 showed higher microhardness values than UP0 under any curing protocol or zirconia shielding condition. The combination of 20-s BL and 40-s NIR curing yielded the highest microhardness in uncovered UP5. However, combining 40-s BL and 20-s NIR curing surpassed the other groups when the zirconia discs were thicker than 0.5 mm. SIGNIFICANCE: NIR exhibits higher transmission through zirconia than BL. UP particles work as strengthen fillers and photosensitizers in cements. NIR upconversion curing could be a new strategy for polymerizing resin cements under thick zirconia restorations.
Assuntos
Teste de Materiais , Polimerização , Cimentos de Resina , Zircônio , Zircônio/química , Cimentos de Resina/química , Luminescência , Dureza , Raios Infravermelhos , Cura Luminosa de Adesivos Dentários , Lâmpadas de Polimerização Dentária , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
In this study two different series of mixed-charge self-assembled monolayers (SAMs) prepared with -N(+)(CH(3))(3)-terminated alkanethiol and strong dissociated monovalent -SO(3)H acid-terminated or weaker dissociated divalent -PO(3)H(2) acid-terminated alkanethiol in pure ethanol were characterized. The influence of the acidity of the anionic functionality in the mixed-charge SAMs on the surface characteristics and platelet compatibility was investigated. X-ray photoelectron spectroscopy indicated that a nearly equivalent amount of countercharged terminal groups was noted on the surface of -SO(3)H/-N(+)(CH(3))(3) mixed SAMs, while "-N(+)(CH(3))(3) thiol poor" phenomena were found on -PO(3)H(2)/-N(+)(CH(3))(3) mixed SAMs instead. This was caused by the distinct differences in solvation capability between the acidic anionic functional groups and solvent molecules and/or the interactions among the terminal ends of the thiols. This acidity difference also affected other interfacial properties and the platelet compatibility. The mixed SAMs formed from the mixture of -SO(3)H- and -N(+)(CH(3))(3)-terminated thiols showed higher surface hydrophilicity and exhibited the least amount of platelets adhered, but these two mixed SAMs were all fairly negatively surface charged. The structure of the hydration layer near the surfaces was likely affected by the acidity of the anionic functionality, and this would cause such a distinct behavior in platelet compatibility. It was concluded that the hydrophilic surfaces with nearly equal amounts of surface positively and negatively charged components could exhibit better platelet compatibility. This work demonstrated that the nature of the acidic terminal ends of alkanethiol is also a key factor for preparing mixed-charge SAMs with good platelet compatibility.
Assuntos
Ácidos , Plaquetas/fisiologia , Espectroscopia FotoeletrônicaRESUMO
OBJECTIVES: The purposes of this study were to investigate whether the presence of silane in universal adhesives affects the functions of 10-methacryloyloxydecyl dihydrogen phosphate (MDP) and adhesion to zirconia. METHODS: Two silane-containing universal adhesives (Scotchbond Universal (SBU) and Clearfil Universal-Bond (CUB)) and two silane-free adhesives (All-Bond Universal (ABU) and SE-Bond primer (SE)) were individually applied on zirconia disks. Time-of-flight secondary-ion-mass-spectrometry (ToF-SIMS) examined the distributions of MDP- and silane-related ions, as well as evidence of zirconium phosphate (ZrP) compounds, on the surface and interfacial regions using a depth profiling mode. The hydrophilicity and resin wettability of the treated zirconia were examined using a contact angle test. For the shear bond strength (SBS) test, the zirconia disks were air-blasted, treated with the assigned adhesives, and bonded with pre-cured composite cylinders using a resin cement. These resin-zirconia assemblies received a bond test after 24-h storage. RESULTS: Both SBU and CUB exhibited silane-related ions and ZrO2(OH)-, but fewer PO- ions in the interfacial regions. CUB had more siloxane-related ions. SE-treated zirconia had abundant PO- ions and particularly high PO3-- and ZrP- related ions in the interfacial regions. The silane-free adhesives exhibited a higher affinity to both water and adhesive liquids. SE showed significantly higher SBSs compared to ABU, while SBU and CUB were not statistically different. SIGNIFICANCE: The silane content may cause hydroxylation of zirconia and affect MDP adsorption. An acidic pH accelerated the condensation of silanol. The bond performance of the MDP-based adhesive could be influenced by the silane content and other components.
Assuntos
Colagem Dentária , Silanos , Cimentos Dentários , Teste de Materiais , Metacrilatos/química , Cimentos de Resina/química , Resistência ao Cisalhamento , Propriedades de Superfície , Zircônio/químicaRESUMO
The combinations of alumina particle air abrasion (AA) and a 10-methacryloyloxyidecyl-dihyidrogenphosphate (MDP) primer and a tribochemical silica coating (TSC) and a silane-base primer are contemporary pre-cementation treatments for zirconia restorations for bonding with resin cements. However, the stability of zirconia resists the mechanical or chemical preparations. The purpose of this study was to develop an atmospheric-pressure oxygen plasma (OP)-aided silicatization method to enhance the adhesion of resin cements to zirconia. Zirconia discs were prepared to receive surface treatments of different combinations: (1) AA or TSC (2) with or without OP treatment, and (3) a chemical primer (no primer, silane, or a silane-MDP mixture). The surface morphology, hydrophilicity, and chemical compositions were characterized, and the resin-zirconia bond strengths were examined either after 24 h or a thermocycling test. The results indicated that the OP treatment after the TSC facilitated the homogeneous distribution of silane and crosslinking of silica particles, and effectively improved the hydrophilicity. The OP increased the O and Si and reduced the C elemental contents, while the combination of TSC, OP, and silane induced SiOx generation. Among the groups, only the TSC-OP-silane treatment effectively enhanced the bond strength and maintained the adhesion after thermocycling. With these results, the OP aided the silicatization protocol effectively, generated silane crosslinking, and resulted in superior resin-zirconia bond strength and durability compared to the current treatments.
RESUMO
OBJECTIVE: To investigate the effect of silane contents on their chemical interaction with 10-methacryloyloxydecyl-dihydrogen phosphate (MDP), and affecting the bonding of MDP to zirconia by time-of-flight secondary ion mass spectrometry (TOF-SIMS) and solid-state nuclear magnetic resonance (SSNMR) spectroscopy. METHODS: Zirconia (Cercon ht, Dentsply) slabs were prepared and fully sintered. Experimental primers SE-5 and SE-10 were formulated by adding 5 wt% and 10 wt% γ-methacryloxypropyltrimethoxysilane to an MDP-based primer SE BOND (SE), respectively. SE, SE-5, and SE-10 were applied on the assigned zirconia slabs. The chemical compositions on the surface and adhesive interfaces were examined by TOF-SIMS in a depth-profiling mode. Hydrophilicity and resin affinity of treated zirconia were analyzed. The bond strengths to resin cylinder were examined either after 24-h storage or thermocycles. In addition, zirconia powders treated with three primers were assessed by SSNMR spectrometry for the adsorption of MDP. RESULTS: TOF-SIMS analysis showed that SE treatment generated the greatest amount of P-O-Zr related ions, which reduced in SE-5 and SE-10 groups. The 3D ion-images illustrated the generation of ZrO2(OH)- ions with silane contents. The SSNMR analysis revealed that the chemical bonding was mainly P-O-Zr ionic bonds in SE but shifted to P-OH-Zr hydrogen bonds in SE-5 and SE-10. SE-5 and SE-10 treated zirconia presented higher hydrophilicity and affinity to resin compared to Zr did. SE showed the highest initial bond strength which significantly decreased after thermocycling. SIGNIFICANCE: MDP adsorption onto zirconia via P-O-Zr ionic bond promotes bonding with resin. The silane enhances the hydroxylation of zirconia and impairs the adsorption of MDP, but does not adversely affect the bond durability.
Assuntos
Colagem Dentária , Silanos , Teste de Materiais , Metacrilatos/química , Cimentos de Resina , Resistência ao Cisalhamento , Propriedades de Superfície , Zircônio/químicaRESUMO
In this study, the mixed self-assembled monolayers (SAMs) containing the mixture of long-chain alkanethiol, SH(CH(2))(11)NH(2) and SH(CH(2))(10)SO(3)H, was prepared as a model surface to examine the interaction between the biological environment and artificial surface. The 10% (v/v) NH(4)OH ethanolic solution and DMSO were chosen as the solvents for the preparation of these mixed SAMs and the "solvent effect" was discussed. X-ray photoelectron spectroscopy (XPS) has indicated that -SO(3)H/-NH(2) mixed SAMs formed from 10% (v/v) NH(4)OH ethanolic solution were surface "-SO(3)H poor", while a nearly equivalent amount of surface -SO(3)H functionality was presented on the mixed SAMs formed from DMSO. This has resulted from the different solvation capability between solvent molecules and the alkanethiol. Such solvent effects were also reflected in various surface properties such as surface wettability and surface zeta potential. The mixed SAMs formed from DMSO were more surface hydrophilic and less negatively surface charged than from 10% (v/v) NH(4)OH ethanolic solution. In addition, these mixed SAMs formed from DMSO exhibited the least amount of protein adsorbed as well as a better platelet compatibility than its counterpart from 10% (v/v) NH(4)OH ethanolic solution. These findings indicated that choosing a proper solvent for mixed zwitterionic SAM can greatly affect its surface properties and biocompatibility, such as to form a surface with near neutrality for reducing protein adsorption and subsequent platelet adhesion and activation.
Assuntos
Materiais Revestidos Biocompatíveis/química , Solventes/química , Aminas/química , Animais , Bovinos , Materiais Revestidos Biocompatíveis/farmacologia , Humanos , Espectroscopia Fotoeletrônica , Adesividade Plaquetária/efeitos dos fármacos , Proteínas/química , Compostos de Sulfidrila/química , Ácidos de Enxofre/química , Propriedades de SuperfícieRESUMO
Reducing microbial infections associated with biomedical devices or articles/furniture noted in a hospital or outpatient clinic remains a great challenge to researchers. Due to its stability and low toxicity, the N-halamine compound has been proposed as a potential antimicrobial agent. It can be incorporated into or blended with the FDA-approved biomaterials. Surface grafting or coating of N-halamine was also reported. Nevertheless, the hydrophobic nature associated with its chemical configuration may affect the microbial interactions with the chlorinated N-halamine-containing substrate. In this study, a polymerizable N-halamine compound was synthesized and grafted onto a polyurethane surface via a surface-initiated atom transfer radical polymerization (SI-ATRP) scheme. Further, using the sequential SI-ATRP reaction method, different hydrophilic monomers, namely poly (ethylene glycol) methacrylate (PEGMA), hydroxyethyl methacrylate (HEMA), and [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (SBMA), were also grafted onto the polyurethane (PU) substrate before the N-halamine grafting reaction to change the surface properties of the N-halamine-modified substrate. It was noted that the chains containing the hydrophilic monomer and the polymerizable N-halamine compound were successfully grafted onto the PU substrate. The degree of chlorination was improved with the introduction of a hydrophilic monomer, except the HEMA. All of these hydrophilic monomer-containing N-halamine-modified PU substrates demonstrated a more than 2 log CFU reduction after microbial incubation. In contrast, the surface modified with N-halamine only exhibited significantly less antimicrobial efficacy instead. This is likely due to the synergistic effects caused by the reduced chlorine content, as well as the reduced surface interactions with the microbes.
RESUMO
Styrenic thermoplastic elastomers (TPEs) consist of styrenic blocks. They are connected with other soft segments by a covalent linkage and are widely used in human life. However, in biomedical applications, TPEs need to be chemically hydrogenated in advance to enhance their properties such as strong UV/ozone resistance and thermal-oxidative stability. In this study, films composed of sulfonated hydrogenated TPEs were evaluated. Hydrogenated tert-butyl styrene-styrene-isoprene block copolymers were synthesized and selectively sulfonated to different degrees by reaction with acetyl sulfate. By controlling the ratio of the hydrogenated tert-butyl styrene-styrene-isoprene block copolymer and acetyl sulfate, sulfonated films were optimized to demonstrate sufficient mechanical integrity in water as well as good biocompatibility. The thermal plastic sulfonated films were found to be free of cytotoxicity and platelet-compatible and could be potential candidates in biomedical film applications such as wound dressings.
RESUMO
Although considerable efforts have been made to vary the alkyl chain length in the quaternary ammonium compounds (QACs) for optimizing the antibacterial activity, only few researchers have systematically investigated the combinatory effects of alkyl chain length and another acryl monomers with the different chemical configuration on the antibacterial activity of the modified substrate. In this study, by surface grafting of various copolymeric brushes, different modified cotton substrates were prepared by surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization reaction for exploring the effects of alkyl chain length of QACs and the fluorine content on antibacterial and anti-microbial adhesion characteristics. The quaternized monomers used were prepared by quaternization of 2-(dimethylamino) ethyl methacrylate (DMAEMA) with 1-bromooctane (DMAEMA + 8), and 1-bromopropane (DMAEMA + 3). The fluoro-containing monomer was 2,2,2-Trifluoroethyl methacrylate (TFEMA). Ethyl methacrylate (EMA) was also used for comparison. Results have shown that the optimal antibacterial and anti-microbial adhesion characteristics were noted on the substrates grafted with DMAEMA + 8 and TFEMA. This can be attributed to the enhanced degree of surface quaternization due to the hydrophobic interactions between the grafted TFEMA and DMAEMA + 8 chains, leading to an increase in antibacterial efficacy of modified cotton substrates.
Assuntos
Compostos de Amônio , Flúor , Antibacterianos/farmacologia , Metacrilatos , Polímeros , Compostos de Amônio Quaternário/farmacologiaRESUMO
Blue light (BL) curing on dental resin composites results in gradient polymerization. By incorporating upconversion phosphors (UP) in resin composites, near-infrared (NIR) irradiation may activate internal blue emission and a polymerization reaction. This study was aimed to evaluate the competency of the NIR-to-BL upconversion luminance in polymerizing dental composites and to assess the appropriate UP content and curing protocol. NaYF4 (Yb3+/Tm3+ co-doped) powder exhibiting 476-nm blue emission under 980-nm NIR was adapted and ball-milled for 4-8 h to obtain different particles. The bare particles were assessed for their emission intensities, and also added into a base composite Z100 (3M EPSE) to evaluate their ability in enhancing polymerization under NIR irradiation. Experimental composites were prepared by dispensing the selected powder and Z100 at different ratios (0, 5, 10 wt% UP). These composites were irradiated under different protocols (BL, NIR, or their combinations), and the microhardness at the irradiated surface and different depths were determined. The results showed that unground UP (d50 = 1.9 µm) exhibited the highest luminescence, while the incorporation of 0.4-µm particles obtained the highest microhardness. The combined 20-s BL and 20-120-s NIR significantly increased the microhardness on the surface and internal depths compared to BL correspondents. The 5% UP effectively enhanced the microhardness under 80-s NIR irradiation but was surpassed by 10% UP with longer NIR irradiation. The combined BL-NIR curing could be an effective approach to polymerize dental composites, while the intensity of upconversion luminescence was related to specific UP particle size and content. Incorporation of 5-10% UP facilitates NIR upconversion polymerization on dental composites.
RESUMO
Microbial adhesion reduction as well as platelet compatibility improvement have been suggested as the key requirements for developing blood-contacting synthetic biomaterials. Surface grafting of hydrophilic polyethylene glycol chains or alkyl chains with zwitterionic terminal ends has been proposed for reducing microbial or platelet adhesion. Nonetheless, none has been reported to incorporate both polyethylene glycol and zwitterionic terminal functionality on the same surface-grafted alkyl chain. In this investigation, a novel surface modification scheme was reported for grafting zwitterionic alkyl chains with or without polyethylene glycol as the spacer. It was noted the bacterial adhesion reduction capability on the zwitterionic modified surface was dependent upon the use of polyethylene glycol spacer or not and the strain of microbe tested. Besides, the zwitterionic modified ones all showed greater antimicrobial adhesion capability than the surface modified with polyethylene glycol alone. On the other hand, significantly reduced platelet adhesion and activation were found, but with no statistical differences noted among the polyethylene glycol-modified surface and zwitterionic ones, with or without polyethylene glycol spacer. These suggested that the use of polyethylene glycol spacer on the zwitterionic terminated surface could further enhance the antimicrobial adhesion against gram-negative bacterial while still keeping its platelet compatibility.
Assuntos
Anti-Infecciosos , Polipropilenos , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Betaína/análogos & derivados , Materiais Biocompatíveis/farmacologia , Adesividade Plaquetária , Polietilenoglicóis/farmacologia , Polipropilenos/farmacologia , Propriedades de SuperfícieRESUMO
Hydrogenated styrenic block copolymers (HSBCs) have been used in medical tubing for many years due to their high clarity, flexibility, kink resistance, and toughness. However, when it comes to blood storage applications, HSBC compounds' market has been limited because of their high hydrophobicity, which may trigger platelet adhesion when contacting with blood. HSBC needs to be physically or chemically modified in advance to make it blood compatible; however, HSBC has strong UV/ozone resistance, thermooxidative stability, and excellent processing capability, which increases the difficulty of the chemical modification process as unsaturated dienes has been converted to saturated stable midblocks. Moreover, medical HSBC-containing compounds primarily make up with the non-polar, hydrophobic nature and benign characteristics of other common ingredients (U.S. Pharmacopeia (USP) grades of mineral oil and polypropylene), which complicates the realization of using HSBC-containing compounds in blood-contacting applications, and this explains why few studies had disclosed chemical modification for biocompatibility improvement on HSBC-containing compounds. Sulfonation has been reported as an effective way to improve the material's blood/platelet compatibility. In this study, hydrogenated tert-butyl styrene (tBS)-styrene-isoprene block copolymers were synthesized and its blends with polypropylene and USP grades of mineral oil were selectively sulfonated by reaction with acetyl sulfate. By controlling the ratio of the hydrogenated tBS-styrene-isoprene block copolymer in the blend, sulfonated films were optimized to demonstrate sufficient physical integrity in water as well as thermal stability, hydrophilicity, and platelet compatibility.
RESUMO
Creating a surface with anti- or reduced fouling characteristics can lead to a reduction in nonspecific protein adsorption as well as the bacterial adhesion and platelet adhesion/activation that occur as follows. A zwitterionic polymer that consists of both cationic and anionic functionalities have been reported as an effective material to achieve these goals, likely resulted from the strongly-adsorbed hydration layer after being immersed in the physiological environment. In this investigation, a novel beta-thiopropionate-based zwitterionic monomer, 2-ammonio-3-((3-(2-hydroxy-3-(methacryloyloxy)propoxy)-3-oxopropyl)thio)-3-methylbutanoate (DPAMA), was synthesized through a facial process. And then the hydrophobic polypropylene was surface modified with this novel zwitterionic polymer through the surface-initiated atom transfer radical polymerization technique. Surface characterization analyses have been employed to investigate the modified surface properties in each reaction stage. In vitro protein adsorption, bacterial adhesion, and platelet compatibility evaluations have shown the polyDPAMA-modified polypropylene surface has significantly reduced fouling characteristics and good hemocompatibility. Henceforth, this novel zwitterionic polyDPAMA grafting PP and the associated grafting reaction scheme have great potential for future clinical applications.
Assuntos
Incrustação Biológica/prevenção & controle , Polipropilenos/farmacologia , Propionatos/química , Adsorção , Aderência Bacteriana/efeitos dos fármacos , Técnicas de Química Sintética , Humanos , Adesividade Plaquetária/efeitos dos fármacos , Polimerização , Propriedades de SuperfícieRESUMO
The adipose-derived stem cell has been used in various regenerative medicine research due to its multiple differentiation capabilities. Developing a stable and quick approach for the differentiation of stem cells is a critical issue in tissue regenerative field. In this investigation, rat adipose-derived stem cells (rADSCs) were seeded onto the type I collagen/transforming growth factor ß1 (TGF-ß1) immobilized polydimethylsiloxane (PDMS) substrate and then combined with short term dynamic stretching stimulation (intermittent or continuous stretching for 6 h) to induce the rADSCs chondrogenesis differentiation using the induction medium without growth factors added in vitro. Via regulating the extracellular chemical- and mechano-receptors of the cultured rADSCs, the chondrogenic differentiation was examined. After 72 h of static culture, proteoglycan secretion was noted on the surfaces modified by collagen with or without TGF-ß1. After different stretching stimulations, significant proteoglycan secretion was noted on the surface modified by both collagen and collagen/TGF-ß1, especially after the intermittent stretching culturing. Nonetheless, genetic expression of the chondrogenic markers: SOX-9, Col2a1, and aggrecan, instead, were dependent upon the surface grafted layer and the stretching mode utilized. These findings suggested that the surface chemical characteristics and external mechanical stimulation could synergistically affect the efficacy of chondrogenic differentiation of rADSCs.
Assuntos
Condrogênese , Fator de Crescimento Transformador beta1 , Animais , Diferenciação Celular , Células Cultivadas , Colágeno , Ratos , Células-TroncoRESUMO
The adipose stem cell is a potential candidate for the autologous chondrocytes repairing approach because of the abundance of fat in the animal body and its versatile differentiation capability. In this study, rat adipose stem cells (rASCs) were seeded into anti-oxidative N-acetylcysteine (NAC) grafted polyurethane (PU) scaffold and then combined with short dynamic compressive stimulation (24 h) to induce rASCs chondrogenesis differentiation in vitro. The inner pore surface of the PU scaffold was first modified via alginate and type I collagen to promote rASCs adherence. The modified layers crosslinked by genipin showed outstanding stability after ultrasonic treatment, indicating the modified layers were stable and can keep the cells adhesion well during dynamic compressive stimulation. After inner pore surface modification and 10 mM NAC grafting, the PU scaffold-A-C-G (graft 10 mM NAC) has shown the best proliferation efficiency with homogeneous cell distribution after 72hr static culture. After short term dynamic compressive stimulation, significant gene expression in chondrogenic markers, Sox-9, and Aggrecan, were noted in both PU scaffold-A-C-G and PU scaffold-A-C-G (graft 10 mM NAC). Considering the cell proliferation efficiency and gene expression, the anti-oxidative NAC grafted PU scaffold combined with short term dynamic compressive stimulation could be useful for cell culturing in stem cell therapy.
Assuntos
Acetilcisteína/química , Materiais Biocompatíveis/química , Poliuretanos/química , Tecido Adiposo/citologia , Agrecanas/genética , Agrecanas/metabolismo , Animais , Materiais Biocompatíveis/farmacologia , Adesão Celular/efeitos dos fármacos , Técnicas de Cultura de Células/métodos , Diferenciação Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Condrócitos/citologia , Condrócitos/metabolismo , Condrogênese/efeitos dos fármacos , Expressão Gênica/efeitos dos fármacos , Iridoides/química , Ratos , Fatores de Transcrição SOX9/genética , Fatores de Transcrição SOX9/metabolismo , Células-Tronco/citologia , Células-Tronco/metabolismoRESUMO
This work describes the synthesis of novel antimicrobial agents consisting of N-halamine and dual quaternary ammonium with different alkyl chain lengths and their antimicrobial applications for PET nonwovens. The antimicrobial agents were grafted onto PET nonwovens via esterification with a crosslinker, 1,2,3,4-butanetetracarboxylic acid (BTCA). The cyclic amide structure in the antimicrobial agents could be easily converted to N-halamine after immersion in a diluted chlorine bleach solution. Variations in surface chemical composition of the modified PET nonwovens were examined by XPS. Antimicrobial activities of the nonwovens/fabrics were tested against S. aureus (Gram-positive) and E. coli (Gram-negative) strains. Systematic investigation showed the antibacterial activities were dependent upon the alkyl chain length. The synergism of N-halamine and dual quaternary ammonium could lead to significant antimicrobial activity with inactivation of up to 90% of S. aureus and E. coli after 10 minute contact. This work suggested that the novel composite biocides with N-halamine and dual quaternary ammonium groups and the associated surface modification methods could be of use for further developing antimicrobial nonwoven applications.
RESUMO
Modeling of cometabolic kinetics is important for better understanding of degradation reaction and in situ application of bio-remediation. In this study, a model incorporated cell growth and decay, loss of transformation activity, competitive inhibition between growth substrate and non-growth substrate and self-inhibition of non-growth substrate was proposed to simulate the degradation kinetics of phenol and trichloroethylene (TCE) by Pseudomonas putida. All the intrinsic parameters employed in this study were measured independently, and were then used for predicting the batch experimental data. The model predictions conformed well to the observed data at different phenol and TCE concentrations. At low TCE concentrations (<2 mg l(-1)), the models with or without self-inhibition of non-growth substrate both simulated the experimental data well. However, at higher TCE concentrations (>6 mg l(-1)), only the model considering self-inhibition can describe the experimental data, suggesting that a self-inhibition of TCE was present in the system. The proposed model was also employed in predicting the experimental data conducted in a repeated batch reactor, and good agreements were observed between model predictions and experimental data. The results also indicated that the biomass loss in the degradation of TCE below 2 mg l(-1) can be totally recovered in the absence of TCE for the next cycle, and it could be used for the next batch experiment for the degradation of phenol and TCE. However, for higher concentration of TCE (>6 mg l(-1)), the recovery of biomass may not be as good as that at lower TCE concentrations.