RESUMO
Electrocatalysts with high activity and durability for acidic oxygen evolution reaction (OER) play a crucial role in achieving cost-effective hydrogen production via proton exchange membrane water electrolysis. A novel electrocatalyst, Te-doped RuO2 (Te-RuO2) nanotubes, synthesized using a template-directed process, which significantly enhances the OER performance in acidic media is reported. The Te-RuO2 nanotubes exhibit remarkable OER activity in acidic media, requiring an overpotential of only 171 mV to achieve an anodic current density of 10 mA cm-2. Furthermore, they maintain stable chronopotentiometric performance under 10 mA cm-2 in acidic media for up to 50 h. Based on the experimental results and density functional calculations, this significant improvement in OER performance to the synergistic effect of large specific surface area and modulated electronic structure resulting from the doping of Te cations is attributed.
RESUMO
The development of capable of simultaneously modulating the sluggish electrochemical kinetics, shuttle effect, and lithium dendrite growth is a promising strategy for the commercialization of lithium-sulfur batteries. Consequently, an elaborate preparation method is employed to create a host material consisting of multi-channel carbon microspheres (MCM) containing highly dispersed heterostructure Fe3O4-FeTe nanoparticles. The Fe3O4-FeTe@MCM exhibits a spontaneous built-in electric field (BIEF) and possesses both lithophilic and sulfophilic sites, rendering it an appropriate host material for both positive and negative electrodes. Experimental and theoretical results reveal that the existence of spontaneous BIEF leads to interfacial charge redistribution, resulting in moderate polysulfide adsorption which facilitates the transfer of polysulfides and diffusion of electrons at heterogeneous interfaces. Furthermore, the reduced conversion energy barriers enhanced the catalytic activity of Fe3O4-FeTe@MCM for expediting the bidirectional sulfur conversion. Moreover, regulated Li deposition behavior is realized because of its high conductivity and remarkable lithiophilicity. Consequently, the battery exhibited long-term stability for 500 cycles with 0.06% capacity decay per cycle at 5 C, and a large areal capacity of 7.3 mAh cm-2 (sulfur loading: 9.73 mg cm-2) at 0.1 C. This study provides a novel strategy for the rational fabrication of heterostructure hosts for practical Li-S batteries.
RESUMO
Bi2Te3-based alloys are the benchmark for commercial thermoelectric (TE) materials, the widespread demand for low-grade waste heat recovery and solid-state refrigeration makes it imperative to enhance the figure-of-merits. In this study, high-performance Bi0.5Sb1.5Te3 (BST) is realized by incorporating Cu2GeSe3 and Se. Concretely, the diffusion of Cu and Ge atoms optimizes the hole concentration and raises the density-of-states effective mass (md *), compensating for the loss of "donor-like effect" exacerbated by ball milling. The subsequent Se addition further increases md *, enabling a total 28% improvement of room-temperature power factor (S2σ), reaching 43.6 µW cm-1 K-2 compared to the matrix. Simultaneously, the lattice thermal conductivity is also significantly suppressed by multiscale scattering sources represented by Cu-rich nanoparticles and dislocation arrays. The synergistic effects yield a peak ZT of 1.41 at 350 K and an average ZT of 1.23 (300-500 K) in the Bi0.5Sb1.5Te2.94Se0.06 + 0.11 wt.% Cu2GeSe3 sample. More importantly, the integrated 17-pair TE module achieves a conversion efficiency of 6.4%, 80% higher than the commercial one at ΔT = 200 K. These results validate that the facile composition optimization of the BST/Cu2GeSe3/Se is a promising strategy to improve the application of BST-based TE modules.
RESUMO
BACKGROUND This retrospective study aimed to compare patient outcomes from standard total knee arthroplasty (TKA) vs navigation-guided arthroplasty using the Brainlab software-guided surgical system at Cangzhou Hospital of Integrated TCM-WM, Hebei, Hebei Province, China from January 2021 to July 2023. MATERIAL AND METHODS A total of 239 patients who underwent total knee arthroplasty in Cangzhou Hospital of Integrated TCM-WM, Hebei from January 2021 to July 2023 were retrospectively analyzed. According to the inclusion criteria, 212 eligible patients were selected for analysis and divided into a Navigation Group (NG) (n=105) and a Traditional Group (TG) (n=107) according to surgical method used. Outcomes measured included duration of disease, operative time, intraoperative blood loss volume, postoperative length of hospital stay, and pain measured by the hospital for special surgery knee score (HSS), Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and forgotten joint score (FJS). RESULTS The comparison of perioperative results between the 2 groups showed that the incision length in the NG was significantly longer than that in the TG (P<0.001, 95% Cl 2.59-3.35). At 3 months after surgery, the HSS score of the NG was statistically higher than that of the TG (P=0.002, 95% Cl 3.42-4.46); the WOMAC score of the NG was lower than that of the TG (P<0.001, 95% Cl -4.41-2.87); and the FJS score of the NG was significantly higher than that of the TG (P=0.003, 95% Cl 2.39-3.67). CONCLUSIONS Compared with conventional TKA, use of the Brainlab navigation system is associated with a longer incision, more accurate implantation position of the prosthesis, faster recovery of knee joint function, and helps patients to "forget" about their knee prosthesis in the short term.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Ferida Cirúrgica , Humanos , Artroplastia do Joelho/métodos , Estudos Retrospectivos , Articulação do Joelho/cirurgia , Osteoartrite do Joelho/cirurgia , Resultado do TratamentoRESUMO
PURPOSE: To describe vertebral artery (VA) variation in patients with or without osseous anomalies at congenital craniovertebral junction (CVJ). METHODS: In the present study, we retrospectively analyzed 258 patients with VA variation who underwent three-dimensional computed tomography angiography (3D CTA) in our hospital from March 2017 to October 2019. RESULTS: Among 258 patients, 180 were accompanied by skeleton structural malformation, including 105 cases of occipital ossification of the atlas, 8 cases of the bipartite atlas, 7 cases of hypoplasia of the posterior arch of the atlas, 45 cases of C2/3 congenital fusion, 2 cases of C2/3/4 congenital fusion, and 13 cases of congenital os odontoid. VA variation was divided into type A (VA variation in the CVJ area without osseous anomalies) and type B (VA variation in the CVJ area with osseous anomalies). There are totally 10 subtypes, including type A1 (atlas occipitalization with VA entrance approach close to middle line, 20.2%); type A2 (atlas occipitalization with VA entrance approach far from middle line, 30.2%); type A3 (first intersegmental VA in C1-C2, 1.9%); type A4 (fenestration of the VA, 2.3%); type A5 (VA bulging type, 6.6%); type A6 (VA exposures with the absence of the posterior atlas arch, 2.3%); type A7 (C2 inner wall type, 0.4%); type A8 (single vertebral artery, 2.3%); type B1 (posterior ponticuli, 2.7%); and type B2 (high-riding VA, 31.4%). CONCLUSION: This study is expected to take the lead in the most comprehensive classification of VA variation.
Assuntos
Angiografia por Tomografia Computadorizada , Artéria Vertebral , Humanos , Artéria Vertebral/diagnóstico por imagem , Artéria Vertebral/anormalidades , Estudos Retrospectivos , Tomografia Computadorizada por Raios X/métodos , AngiografiaRESUMO
Maximizing hole-transfer kinetics-usually a rate-determining step in semiconductor-based artificial photosynthesis-is pivotal for simultaneously enabling high-efficiency solar hydrogen production and hole utilization. However, this remains elusive yet as efforts are largely focused on optimizing the electron-involved half-reactions only by empirically employing sacrificial electron donors (SEDs) to consume the wasted holes. Using high-quality ZnSe quantum wires as models, we show that how hole-transfer processes in different SEDs affect their photocatalytic performances. We found that larger driving forces of SEDs monotonically enhance hole-transfer rates and photocatalytic performances by almost three orders of magnitude, a result conforming well with the Auger-assisted hole-transfer model in quantum-confined systems. Intriguingly, further loading Pt cocatalyts can yield either an Auger-assisted model or a Marcus inverted region for electron transfer, depending on the competing hole-transfer kinetics in SEDs.
RESUMO
Facilitating charge separation and transport of semiconductors is pivotal to improving their solar-to-hydrogen conversion efficiency. To this end, manipulating the charge dynamics via element doping has attracted much attentions. Here, we doped phosphorus (P) into two-dimensional (2D) single-crystalline quaternary sulfide (SCQS) nanobelts, enabling significantly enhanced photocatalytic H2 production. By carefully studying the carrier dynamics after P doping, we found that the introduction of P leads to a narrowed band gap, inhibits the recombination of photogenerated carriers, and increases the electric conductivity, all of which contributed to their improved catalytic performance. Meanwhile, the inherited single-crystalline structure and exposed (0001) facet favors carrier transport and photocatalytic hydrogen production. It has been found that the P-doped Cu-Zn-In-S (CZIS) nanobelts exhibit a visible-light photocatalytic hydrogen production rate of 12.2 mmol h-1 g-1 without cocatalysts, which is 3.5-fold higher than that of pristine CZIS nanobelts. Moreover, the P doping strategy is proven to be common to other semiconductors, such as single-crystalline Cu-Zn-Ga-S (CZGS) nanobelts. Our work provides an efficient way to manipulate charge carriers and will help develop high-efficiency photocatalysts.
RESUMO
Axially, epitaxially organizing nano-objects of distinct compositions and structures into superlattice nanowires enables full utilization of sunlight, readily engineered band structures, and tunable geometric parameters to fit carrier transport, thus holding great promise for optoelectronics and solar-to-fuel conversion. To maximize their efficiency, the general and high-precision synthesis of colloidal axial superlattice nanowires (ASLNWs) with programmable compositions and structures is the prerequisite; however, it remains challenging. Here, we report an axial encoding methodology toward the ASLNW library with precise control over their compositions, dimensions, crystal phases, interfaces, and periodicity. Using a predesigned, editable nanoparticle framework that offers the synthetic selectivity, we are able to chemically decouple adjacent sub-objects in ASLNWs and thus craft them in a controlled approach, yielding a library of distinct ASLNWs. We integrate therein plasmonic, metallic, or near-infrared-active chalcogenides, which hold great potential in solar energy conversion. Such synthetic capability enables a performance boost in target applications, as we report order-of-magnitude enhanced photocatalytic hydrogen production rates using optimized ASLNWs compared to corresponding solo objects. Furthermore, it is expected that such unique superlattice nanowires could bring out new phenomena.
RESUMO
Glioblastoma multiforme (GBM) is the most common primary malignant brain tumor without curable therapy. Surgical resection remains the first choice of patients with GBM but tumors relapse rapidly even combined with conventional chemoradiotherapy. The mechanism of GBM rapid recurrence is poorly understood, which is largely due to the lack of an appropriate animal model, thus heavily impedes the improvement of postoperative therapy. Here we established a highly reproducible mouse GBM surgical model by using the syngeneic G422TN-GBM cells, which faithfully recapitulates the features of rapid recurrence of human GBM after surgery. Implanting 2 × 103-5 × 104 of G422TN-GBM cells in mouse cerebral cortex caused death in all animal within 23 days, while surgery was an effective therapy but not curable. After complete removal of visible tumors on day 5-9 of tumor growth, the tumors recurred macroscopically within 5 days accompanied by increasing infiltrative cancer foci. Mechanistically, the rapid recurrence of resected tumors was positively correlated to early Akt activation, which subsequently upregulated PD-L1/Vimentin and promoted proliferation/migration of cancer cells. In addition, environmental astrocytic activation with strong PD-L1 signal was prominent. Taken together, we provided a novel GBM surgical recurrence model for preclinical studies and suggested complicated recurring mechanisms involving in strong oncogenic signaling as well as immune inhibitory signals from both GBM cells and their neighboring astrocytes.
Assuntos
Antígeno B7-H1/metabolismo , Neoplasias Encefálicas/metabolismo , Glioblastoma/metabolismo , Proteínas Proto-Oncogênicas c-akt/metabolismo , Transdução de Sinais , Vimentina/metabolismo , Animais , Neoplasias Encefálicas/cirurgia , Neoplasias Encefálicas/terapia , Linhagem Celular Tumoral , Terapia Combinada , Modelos Animais de Doenças , Glioblastoma/cirurgia , Glioblastoma/terapia , Humanos , Estimativa de Kaplan-Meier , Masculino , Camundongos , Microscopia de Fluorescência/métodos , Recidiva Local de NeoplasiaRESUMO
The emerging material GeMnTe2 provides a rare example to study the spin degree of freedom in thermoelectric transport, as it exhibits an anomalous Seebeck coefficient driven by the spin's thermodynamic entropy. This work presents an unconventional strategy to optimize the thermoelectric performance of GeMnTe2 by manipulating the spin degree of freedom. NaBiTe2 is alloyed into GeMnTe2 to disorder the spin orientation under finite temperature, and the obtained Seebeck coefficient is confirmed to be dramatically enhanced by more than 150%. The measurements of XRD and magnetic susceptibility indicate that the increased Seebeck coefficient is due to the increase of the spin's thermodynamic entropy. Finally, the maximum ZT of 1.06 at 820 K is obtained in Ge0.8Na0.1Bi0.1MnTe2. This work enriches the physical picture of spin degree of freedom in thermoelectric materials.
RESUMO
The multi-component pharmacokinetic study of Chinese herbal extracts elaborates the in vivo processes,including absorption,distribution,metabolism,and excretion,of multiple bioactive components,which is of significance in revealing pharmacodynamic material basis of Chinese herbal medicine. In recent years,with the innovation in ideas,and development of techniques and methods on traditional Chinese medicine( TCM) research,the pharmacokinetic studies of Chinese herbal extracts were extensively performed,and notable progress has been made. This paper reviewed the advancement of multi-component pharmacokinetics of Chinese herbal extracts in recent five years from analysis technology of biological sample,the pharmacokinetic characteristics of Chinese herbal medicine with complex system,and the impacts of processing and pathological state on pharmacokinetics of Chinese herbal extracts,aiming to provide a reference for quality control,product development and rational medication of Chinese herbal extracts.
Assuntos
Medicamentos de Ervas Chinesas , China , Humanos , Medicina Tradicional Chinesa , Controle de QualidadeRESUMO
Authentication of dairy and meat products is important to ensure fair competition, consumer benefit, and food safety. The large difference in price between camel and cow milk may be an incentive to adulterate camel dairy products with cow-derived foodstuffs. However, no studies so far have used triplex real-time PCR with an endogenous control to identify camel and cow origins in dairy and meat products. In this study, we developed a triplex real-time PCR assay based on amplification of mitochondrial 12S ribosomal DNA for the authentication of camel-derived dairy and meat products. This method was applied to identify camel and cow DNA in milk, yogurt, cheese, milk powder, milk beverage, meat products, and mixtures with milk and meat. Concentrations as low as 1 to 5% and 0.1% camel milk and meat, respectively, were detected in the mixtures, and 1 to 5% and 0.1% cow milk and meat, respectively, were identified via this approach. The limits of detection were 0.005 to 0.0025 ng, 0.05 to 0.001 ng, 0.001 to 0.0005 ng, and 0.00025 to 0.0001 ng of DNA in camel milk, camel yogurt, commercial camel milk beverage, and camel meat, and from 0.0025 to 0.001 ng, 0.5 to 0.001 ng, 1 to 0.05 ng, 0.01 ng, 0.001 ng, 0.0005 to 0.00025 ng, 0.0005 to 0.00025 ng, and 0.005 ng of DNA from cow milk, yogurt, cheese, acidic whey, milk powder, beef, beef jerky, and beef sausage, respectively. Different dairy and meat samples of camel and cow origins had a range of authentication limits and limits of detection. The designed triplex real-time PCR assay was shown to be a specific, sensitive, and efficient technique for the identification of camel and cow DNA in foodstuffs.
Assuntos
Camelus , Produtos da Carne/normas , Reação em Cadeia da Polimerase Multiplex/veterinária , Reação em Cadeia da Polimerase em Tempo Real/veterinária , Animais , Camelus/genética , Bovinos/genética , Queijo/análise , DNA/análise , Laticínios/análise , Feminino , Carne , Produtos da Carne/análise , Leite/química , Reação em Cadeia da Polimerase em Tempo Real/métodos , IogurteRESUMO
We aimed to investigate whether the cardioprotection of sevoflurane against ischemia-reperfusion (IR) injury is via inhibiting endoplasmic reticulum stress. The rat in vivo model of myocardial IR injury was induced by ligation of the left anterior descending coronary artery. Sevoflurane significantly ameliorated the reduced cardiac function, increased infarct size, and elevated troponin I level and lactate dehydrogenase activity in plasma induced by IR injury. Sevoflurane suppressed the IR-induced myocardial apoptosis. The increased protein levels of glucose-regulated protein 78 and C/EBP homologous protein (CHOP) after myocardial IR were significantly reduced by sevoflurane. The protein levels of phosphorylated protein kinase RNA-like endoplasmic reticulum kinase (PERK), phosphorylated eukaryotic initiation factor 2 (eIF2α), and activating transcription factor 4 (ATF4) were significantly increased in rats with IR and attenuated by sevoflurane treatment. The phosphorylation of Akt was further activated by sevoflurane. The cardioprotection of sevoflurane could be blocked by wortmannin, a PI3K/Akt inhibitor. Our results suggest that the cardioprotection of sevoflurane against IR injury might be mediated by suppressing PERK/eIF2a/ATF4/CHOP signaling via activating the Akt pathway, which helps in understanding the novel mechanism of the cardioprotection of sevoflurane.
Assuntos
Cardiotônicos/farmacologia , Estresse do Retículo Endoplasmático/efeitos dos fármacos , Traumatismo por Reperfusão Miocárdica/patologia , Traumatismo por Reperfusão Miocárdica/prevenção & controle , Sevoflurano/farmacologia , Fator 4 Ativador da Transcrição/metabolismo , Animais , Apoptose/efeitos dos fármacos , Vasos Coronários/efeitos dos fármacos , Vasos Coronários/patologia , Fator de Iniciação 2 em Eucariotos/metabolismo , Coração/efeitos dos fármacos , Coração/fisiopatologia , Masculino , Traumatismo por Reperfusão Miocárdica/metabolismo , Traumatismo por Reperfusão Miocárdica/fisiopatologia , Miocárdio/metabolismo , Miocárdio/patologia , Proteínas Proto-Oncogênicas c-akt/metabolismo , Ratos , Ratos Sprague-Dawley , Transdução de Sinais/efeitos dos fármacos , eIF-2 Quinase/metabolismoRESUMO
This study compared the efficacy and safety of high-dose dexamethasone (HD-DXM) and conventional prednisone (PDN) on the largest cohort to date as first-line strategies for newly diagnosed adult primary immune thrombocytopenia (ITP). Patients enrolled were randomized to receive DXM 40 mg/d for 4 days (n = 95, nonresponders received an additional 4-day course of DXM) or prednisone 1.0 mg/kg daily for 4 weeks and then tapered (n = 97). One or 2 courses of HD-DXM resulted in a higher incidence of overall initial response (82.1% vs 67.4%, P = .044) and complete response (50.5% vs 26.8%, P = .001) compared with prednisone. Time to response was shorter in the HD-DXM arm (P < .001), and a baseline bleeding score ≥8 was associated with a decreased likelihood of initial response. Sustained response was achieved by 40.0% of patients in the HD-DXM arm and 41.2% in the PDN arm (P = .884). Initial complete response was a positive indicator of sustained response, whereas presence of antiplatelet autoantibodies was a negative indicator. HD-DXM was generally tolerated better. We concluded that HD-DXM could be a preferred corticosteroid strategy for first-line management of adult primary ITP. This study is registered at www.clinicaltrials.gov as #NCT01356511.
Assuntos
Dexametasona/administração & dosagem , Imunossupressores/administração & dosagem , Prednisona/administração & dosagem , Púrpura Trombocitopênica Idiopática/tratamento farmacológico , Adolescente , Adulto , Idoso , Autoanticorpos/sangue , Autoanticorpos/imunologia , Dexametasona/efeitos adversos , Quimioterapia Combinada , Feminino , Seguimentos , Humanos , Imunossupressores/efeitos adversos , Estimativa de Kaplan-Meier , Masculino , Pessoa de Meia-Idade , Razão de Chances , Contagem de Plaquetas , Prednisona/efeitos adversos , Púrpura Trombocitopênica Idiopática/diagnóstico , Indução de Remissão , Resultado do Tratamento , Adulto JovemRESUMO
Koumiss is a popular dairy product in many lands, traditionally prepared from mare milk with spontaneous fermentation. Mare milk and its fermented derivates are more expensive than cow milk and its fermented derivates, and the possibility exists for producers and dealers to adulterate equine products with bovine items. In this work, we described the development of a triplex real-time PCR based on species-specific TaqMan probes for identification of bovine and equine DNA in milks and dairy products. In addition, a novel designed endogenous control was simultaneously amplified to eliminate possible false negatives. With this methodology, bovine and equine DNA were specifically identified by employing developed primers and probes. The limits of detection of this method were 0.001 ng for cow milk, yogurt, and mare milk, and 0.005 ng for sour soup and koumiss, respectively. In addition, the triplex real-time PCR assay for authentication of animal-derived products was effectively validated using binary DNA and milk mixtures, exhibiting well in terms of specificity, sensitivity, and reproducibility. In short, the triplex PCR assay was verified to be a time-saving and money-saving technique for the identification of bovine and equine DNA in milks and dairy products.
Assuntos
DNA/análise , Laticínios/análise , Leite/química , Reação em Cadeia da Polimerase em Tempo Real/veterinária , Animais , Bovinos , Feminino , Cavalos , Reação em Cadeia da Polimerase em Tempo Real/métodos , Reprodutibilidade dos Testes , IogurteRESUMO
Chemicals in the water of urban areas are representative of the occurrence of these chemicals in the city surrounding water systems and reflect recent human or industrial usage of those chemicals in the sampling areas. In this study, the levels of eight endocrine-disrupting chemicals [including bisphenol analogues, parabens, and triclosan (TCS)] were determined in urban river water and sediments in Guangzhou, South China, and their related ecological risks were evaluated. The eight target chemicals were frequently detected in our samples, with concentrations ranging from not detected (ND) to 65,600 ng/L and from ND to 492 ng/g dw in river water and sediments, respectively. Among these chemicals, the three most abundant were bisphenol A (BPA) (accounting for 35% of the total amount), methyl paraben (MeP) (23%), and TCS (14%) in river water and BPA (43%), TCS (37%), and MeP (14%) in sediments. Significant correlations were found between most target EDCs, particularly MeP and TCS, in river water and sediments (both p < 0.01), indicating their similar sources and wide usage. The ecological risk assessment methods used suggested that TCS was the chemical of primary concern, with an average hazard quotient (HQ) = 1.57 (up to 11.5) in river water and an average HQ = 0.74 (up to 3.63) in sediments. In addition, the ecological risk assessment of different sampling sites indicated a suspected high-risk level for some sites in the study area.
Assuntos
Disruptores Endócrinos/análise , Sedimentos Geológicos/análise , Rios/química , Poluentes Químicos da Água/análise , Animais , Compostos Benzidrílicos/análise , China , Cidades , Ecotoxicologia/métodos , Monitoramento Ambiental/métodos , Parabenos/análise , Fenóis/análise , Medição de Risco , Triclosan/análiseRESUMO
Bi2Te3-based materials play a crucial role in solid cooling and power generation, but the rapidly deteriorated ZT with rising temperatures above 450 K severely limits further applications. Here, this paper reports a novel preparation method of annealing treatment for molten ingot, which can enhance the thermoelectric performance of n-type Bi2Te2.4Se0.6 in a wide temperature range. Instead of conventional halides, copper is adopted to regulate the carrier concentration and grain size to optimal levels. During the process of annealing at 573 K for 4 h, the number of twins significantly increases and the grains of Cu-doped samples become larger and more oriented. These optimizations lead to higher carrier mobility with similar carrier concentration compared with the sample without heat treatment. The synergistic effects of Cu doping and annealing treatment realize a high average ZT of 0.89 within 300-600 K in n-type Cu0.02Bi2Te2.4Se0.6. Combined with p-type (Bi,Sb)2Te3, the fabricated thermoelectric device exhibits a high conversion efficiency of 6.9% at a temperature difference of 300 K. This study suggests that annealing treatment is a simple and effective scheme to promote the applications of n-type Bi2(Te,Se)3 in a wide temperature range.
RESUMO
Power generation modules utilizing thermoelectric (TE) materials are suitable for recycling widespread low-grade waste heat (<600 K), highlighting the immediate necessity for advanced Bi2 Te3 -based alloys. Herein, the substantial enhancement in TE performance of the p-type Bi0.4 Sb1.6 Te3 (BST) sintered sample is realized by subtly incorporating the non-stoichiometric Ag5 Te3 and counteractive Se. Specifically, Ag atoms diffused into the BST lattice improve the density-of-states effective mass (md * ) and boost the hole concentration for the suppressed bipolar effect. The addition of Se further improves md * prompting the room-temperature power factor upgrade to 46 W cm-1 K-2 . Concurrently, the lattice thermal conductivity is considerably lowered by multiple scattering sources exemplified by Sb-rich nanoprecipitates and dense dislocations. These synergistic results yield a high peak ZT of 1.44 at 375 K and an average ZT of 1.28 between 300 and 500 K in the Bi0.4 Sb1.6 Te2.95 Se0.05 + 0.05 wt.% Ag5 Te3 sample. More significantly, when coupled with n-type zone-melted Bi2 Te2.7 Se0.3 , the integrated 17-pair TE module achieves a competitive conversion efficiency of 6.1% and an output power density of 0.40 W cm-2 at a temperature difference of 200 K, demonstrating great potential for practical applications.
RESUMO
Bismuth-telluride-based alloy has long been considered as the most promising candidate for low-grade waste heat power generation. However, optimizing the thermoelectric performance of n-type Bi2Te3 is more challenging than that of p-type counterparts due to its greater sensitivity to texture, and thus limits the advancement of thermoelectric modules. Herein, the thermoelectric performance of n-type Bi2Te3 is enhanced by incorporating a small amount of CuGaTe2, resulting in a peak ZT of 1.25 and a distinguished average ZT of 1.02 (300-500 K). The decomposed Cu+ strengthens interlayer interaction, while Ga+ optimizes carrier concentration within an appropriate range. Simultaneously, the emerged numerous defects, such as small-angle grain boundaries, twin boundaries, and dislocations, significantly suppresses the lattice thermal conductivity. Based on the size optimization by finite element modelling, the constructed thermoelectric module yields a high conversion efficiency of 6.9% and output power density of 0.31 W cm-2 under a temperature gradient of 200 K. Even more crucially, the efficiency and output power little loss after subjecting the module to 40 thermal cycles lasting for 6 days. This study demonstrates the efficient and reliable Bi2Te3-based thermoelectric modules for broad applications in low-grade heat harvest.
RESUMO
BACKGROUND: Cimicifugae Rhizoma, known in Chinese as Shengma, is a common medicinal material in traditional Chinese medicine (TCM), mainly used for treating wind-heat headaches, sore throat, uterine prolapse, and other diseases. OBJECTIVES: An approach using a combination of ultra-performance liquid chromatography (UPLC), MS, and multivariate chemometric methods was designed to assess the quality of Cimicifugae Rhizoma. METHODS: All materials were crushed into powder and the powdered sample was dissolved in 70% aqueous methanol for sonication. Chemometric methods, including hierarchical cluster analysis (HCA), principal component analysis (PCA), and orthogonal partial least-squares discriminant analysis (OPLS-DA), were adopted to classify and perform a comprehensive visualization study of Cimicifugae Rhizoma. The unsupervised recognition models of HCA and PCA obtained a preliminary classification and provided a basis for classification. In addition, we constructed a supervised OPLS-DA model and established a prediction set to further validate the explanatory power of the model for the variables and unknown samples. RESULTS: Exploratory research found that the samples were divided into two groups, and the differences were related to appearance traits. The correct classification of the prediction set also demonstrated a strong predictive ability of the models for new samples. Subsequently, six chemical makers were characterized by UPLC-Q-Orbitrap-MS/MS, and the content of four components was determined. The results of the content determination revealed the distribution of representative chemical markers caffeic acid, ferulic acid, isoferulic acid, and cimifugin in two classes of samples. CONCLUSIONS: This strategy can provide a reference for assessing the quality of Cimicifugae Rhizoma, which is significant for the clinical practice and QC of Cimicifugae Rhizoma. HIGHLIGHTS: The HCA, PCA and OPLS-DA models visually classify Cimicifugae Rhizoma by appearance traits and obtain the chemical markers that influence the classification. The training and prediction sets were built to demonstrate the accuracy of the classification. Advanced UPLC-Q-Orbitrap-MS/MS technology provides powerful elucidation of critical chemical markers.