Enhanced Storage Capacity via Anion Substitution for Advanced Delayed X-ray Detection.

X-ray radiation information storage, characterized by its ability to detect radiation with delayed readings, shows great promise in enabling reliable and readily accessible X-ray imaging and dosimetry in situations where conventional detectors may not be feasible. However, the lack of specific strategies to enhance the memory capability dramatically hampers its further development. Here, we present an effective anion substitution strategy to enhance the storage capability of NaLuF4:Tb3+ nanocrystals attributed to the increased concentration of trapping centers under X-ray irradiation. The stored radiation information can be read out as optical brightness via thermal, 980 nm laser, or mechanical stimulation, avoiding real-time measurement under ionizing radiation. Moreover, the radiation information can be maintained for more than 13 days, and the imaging resolution reaches 14.3 lp mm-1. These results demonstrate that anion substitution methods can effectively achieve high storage capability and broaden the application scope of X-ray information storage.

Structure Responsible for the Superconducting State in La3Ni2O7 at High-Pressure and Low-Temperature Conditions.

Very recently, a new superconductor with Tc = 80 K has been reported in nickelate (La3Ni2O7) at around 15-40 GPa conditions (Nature, 621, 493, 2023), which is the second type of unconventional superconductor, besides cuprates, with Tc above liquid nitrogen temperature. However, the phase diagram plotted in this report was mostly based on the transport measurement under low-temperature and high-pressure conditions, and the assumed corresponding X-ray diffraction (XRD) results were carried out at room temperature. This encouraged us to carry out in situ high-pressure and low-temperature synchrotron XRD experiments to determine which phase is responsible for the high Tc state. In addition to the phase transition from the orthorhombic Amam structure to the orthorhombic Fmmm structure, a tetragonal phase with the space group of I4/mmm was discovered when the sample was compressed to around 19 GPa at 40 K where the superconductivity takes place in La3Ni2O7. The calculations based on this tetragonal structure reveal that the electronic states that approached the Fermi energy were mainly dominated by the eg orbitals (3dz2 and 3dx2-y2) of Ni atoms, which are located in the oxygen octahedral crystal field. The correlation between Tc and this structural evolution, especially Ni-O octahedra regularity and the in-plane Ni-O-Ni bonding angles, is analyzed. This work sheds new light to identify what is the most likely phase responsible for superconductivity in double-layered nickelate.

Temperature-Dependent Color-Tunable Afterglow in Zirconium-Doped CsCdCl3 Perovskite for Advanced Anti-Counterfeiting and Thermal Distribution Detection.

Persistent luminescence (PersL) materials exhibit thermal-favored optical behavior, enabling their unique applications in security night vision signage, in vivo bioimaging, and optical anti-counterfeiting. Therefore, developing efficient and color-tunable PersL materials is significantly crucial in promoting advanced practical use. In this study, hexagonal Zr4+ -doped CsCdCl3 perovskite is synthesized via a hydrothermal reaction with a tunable photoluminescent (PL) behavior through heterovalent substitution. Moreover, the incorporation of Zr4+ ions result in an extra blue emission band, originating from the enhanced excitonic recombination in D3d octahedrons. Furthermore, the afterglow performances of the samples are dramatically improved, along with the noticeable temperature-dependent PersL as well as the thermo-luminescence with tunable color output. Detailed analysis reveals that the unique temperature-dependent PersL and thermo-luminescence color change are attributed to the presence of multiple luminous centers and abundant traps. Overall, this work facilitates the development of optical intelligence platforms and novel thermal distribution probes with the as-developed halides perovskite for its superior explored PersL characteristic.

Crystal Field-Engineered Cr3+-Doped Gd3(MgxGa5-2xGex)O12 Phosphors for Near-Infrared LEDs and X-ray Imaging Applications.

Inorganic materials doped with chromium (Cr) ions generate remarkable and adjustable broadband near-infrared (NIR) light, offering promising applications in the fields of imaging and night vision technology. However, achieving high efficiency and thermal stability in these broadband NIR phosphors poses a significant challenge for their practical application. Here, we employ crystal field engineering to modulate the NIR characteristics of Cr3+-doped Gd3Ga5O12 (GGG). The Gd3MgxGa5-2xGexO12 (GMGG):7.5% Cr3+ (x = 0, 0.05, 0.15, 0.20, and 0.40) phosphors with NIR emission are developed through the cosubstitution of Mg2+ and Ge4+ for Ga3+ sites. This cosubstitution strategy also effectively reduces the crystal field strength around Cr3+ ions, which results in a significant enhancement of the photoluminescence (PL) full width at half-maximum (fwhm) from 97 to 165 nm, alongside a red shift in the PL peak and an enhancement of the PL intensity up to 2.3 times. Notably, the thermal stability of the PL behaviors is also improved. The developed phosphors demonstrate significant potential in biological tissue penetration and night vision, as well as an exceptional scintillation performance for NIR scintillator imaging. This research paves a new perspective on the development of high-performance NIR technology in light-emitting diodes (LEDs) and X-ray imaging applications.

Nontargeted Analysis of Coumarins in Source Water and Their Formation of Chlorinated Coumarins as DBPs in Drinking Water.

Coumarin was detected as one of the most abundant compounds by nontargeted analysis of natural product components in actual water samples prior to disinfection. More importantly, prechlorination of humic acid generated 3-hydroxycoumarin and monohydroxy-monomethyl-substituted coumarin with a total yield of ≤10.1%, which suggested the humic substance in raw water is an important source of coumarins. 7-Hydroxycoumarin, 6-hydroxy-4-methylcoumarin, 6,7-dihydroxycoumarin, and 7-methoxy-4-methylcoumarin were identified in raw water by high-performance liquid chromatography-tandem high-resolution mass spectrometry because only some coumarin standards were commercially available. Their chlorination generated monochlorinated and polychlorinated coumarins, and their structures were confirmed by the synthesized standards. These products could form at various dosages of chlorine and pH levels, and some with a concentration of 600 ng/L can be stable in tap water for days. 3,6,8-Trichloro-7-hydroxycoumarin, 3-chloro-7-methoxy-4-methylcoumarin, and 3,6-dichloro-7-methoxy-4-methylcoumarin were first identified in finished water with concentrations of 0.0670, 78.1, and 14.7 ng/L, respectively, but not in source water, suggesting that they are new DBPs formed during disinfection. The cytotoxicity of 3-chloro-7-methoxy-4-methylcoumarin in CHO-K1 cells was comparable to those of 2,6-dibromo-1,4-benzoquinone and 2,6-dichloro-1,4-benzoquinone in TIC-Tox analyses, suggesting that further investigation of their occurrence and control in drinking water systems is warranted.

Negative linear compressibility and strong enhancement of emission in Eu[Ag(CN)2]3·3H2O under pressure.

The framework material Eu[Ag(CN)2]3·3H2O exhibits a negative linear compressibility (NLC) of -4.2(1) TPa-1 over the largest pressure range yet observed (0-8.2 GPa). High-pressure single-crystal X-ray diffraction data show that the rapid contraction of the Kagome silver layers under compression causes the wine-rack lattice to expand along the c-axis. The hydrogen bonds between the water molecules and the main frameworks constrain the structural deformation under pressure and eventually a weak NLC effect generated. Furthermore, we found that the pressure-induced emission intensity increases almost 800-fold at 4.0 GPa, followed by a gradual decrease and disappearance at 8.1 GPa. Under compression, high pressure significantly tunes the triplet level positions near the Eu3+ ions, and horizontal displacement between a quenching excited state and the excited levels of Eu3+ facilitates the energy transfer process to the 5D0 excited state and limits the nonradiative corssover at elevated pressures, thus increasing the emission intensity. In addition, we observe a gradual band gap reduction with increasing pressure, and the sample could not be returned to the initial state after the pressure was completely released. By controlling the structural flexibility, we observe a coupled NLC and pressure-induced strong enhancement of the emission properties of Eu[Ag(CN)2]3·3H2O, which provides a new route for the design of new optical devices with intriguing luminescence properties under extreme environments.

Photophysical Behavior of Triethylmethylammonium Tetrabromoferrate(III) under High Pressure.

The pressure-induced properties of hybrid organic-inorganic ferroelectrics (HOIFs) with tunable structures and selectable organic and inorganic components are important for device fabrication. However, given the structural complexity of polycrystalline HOIFs and the limited resolution of pressure data, resolving the structure-property puzzle has so far been the exception rather than the rule. With this in mind, we present a collection of in situ high-pressure data measured for triethylmethylammonium tetrabromoferrate(III), ([N(C2H5)3CH3][FeBr4]) (EMAFB) by unraveling its flexible physical and photophysical behavior up to 80 GPa. Pressure-driven X-ray diffraction and Raman spectroscopy disclose its soft and reversible structural distortion, creating room for delicate band gap modulation. During compression, orange turns dark red at ∼2 GPa, and further compression results in piezochromism, leading to opaque black, while decompressed EMAFB appears in an orange hue. Assuming that the mechanical softness of EMAFB is the basis for reversible piezochromic control, we present alternations in the electronic landscape leading to a 1.22 eV band narrowing at 20.3 GPa while maintaining the semiconducting character at 72 GPa. EMAFB exhibits an emission enhancement, manifested by an increase of photoluminescence up to 17.3 GPa, correlating with the onsets of structural distortion and amorphization. The stimuli-responsive behavior of EMAFB, exhibiting stress-activated modification of the electronic structure, can enrich the physical library of HOIFs suitable for pressure-sensing technologies.

Visualized Stress-Temperature Sensor with the Zinc Sulfide and Perovskite Glass Ceramics Composite.

The visualized dual-modal stress-temperature sensing refers to the ability of a sensor to provide real-time and visible information about both stress and temperature and has indeed attracted significant interest in various fields. However, the development of convenient methods for achieving this capability remains a challenge. In this work, a dual-modal stress-temperature sensor is successfully fabricated using a ZnS/Cu@CsPbBr1.2I1.8 glass ceramics (GCs)/polydimethylsiloxane (PDMS) (ZCP) composite film. The tunable ML color is achieved by modulating the concentration of CsPbBr1.2I1.8 GCs in the ZCP composite films based on the light conversion process from ZnS/Cu to CsPbBr1.2I1.8 GCs. Additionally, the stress and temperature can be visualized simultaneously by integrating the ML intensity and ML color of the ZCP composite film. This feature allows for the real-time monitoring of automotive tire temperature by embedding the ZCP composite film on the tire surface, enabling a strong and stable response to both stress and temperature changes. Overall, this work offers a convenient, efficient, and repeatable approach for achieving visualized dual-modal stress-temperature sensing in the fields of mechanical engineering, structural health monitoring, and intelligent devices.

Multimode-Responsive Luminescence of Er3+ Single-Activated CaF2 Phosphor for Advanced Information Encryption.

The current optical anticounterfeit strategies that rely on multimode luminescence in response to the photon or thermal stimuli have significant importance in the field of anticounterfeiting and information encryption. However, the dependence on light and heat sources might limit their flexibility in practical applications. In this work, Er3+ single-doped CaF2 phosphors that show multistimuli-responsive luminescence have been successfully prepared. The as-obtained CaF2:Er3+ phosphor exhibits green photoluminescence (PL) and color-tunable up-conversation (UC) luminescence from red to green due to the cross-relaxation of Er3+ ions. Additionally, as-obtained CaF2:Er3+ phosphors also display green mechano-luminescence behavior, which is induced by the contact electrification between the CaF2 particles and PDMS polymers, enabling the phosphor to flexibly respond to mechanical stimuli. Moreover, feasible anticounterfeiting schemes with the capability of multistimuli-responsive and flexible decryption have been constructed, further expanding the application of optical materials in the field of advanced anticounterfeiting and information encryption.

Detoxification mechanism of herbicide in Polypogon fugax and its influence on rhizosphere enzyme activities.

The excessive use of chemical herbicides has resulted in evolution of herbicide-resistant weeds. Cytochrome P450 monooxygenases (P450s) are vital detoxification enzymes for herbicide-resistant weeds. Herein, we confirmed a resistant (R) Polypogon fugax population showing resistance to quizalofop-p-ethyl, acetolactate synthase (ALS)-inhibiting herbicide pyroxsulam, and several other ACCase (acetyl-CoA carboxylase)-inhibiting herbicides. Molecular analysis revealed no target-site gene mutations in the R population. Foliar spraying with malathion clearly reversed the quizalofop-p-ethyl phytotoxicity. Higher level of quizalofop-p-ethyl degradation was confirmed in the R population using HPLC analysis. Subsequently, RNA-Seq transcriptome analysis indicated that the overexpression of CYP89A2 gene appeared to be responsible for reducing quizalofop-p-ethyl phytotoxicity. The molecular docking results supported a metabolic effect of CYP89A2 protein on most herbicides tested. Furthermore, we found that low doses of herbicides stimulated the rhizosphere enzyme activities in P. fugax and the increase of rhizosphere dehydrogenase of R population may be related to its resistance mechanism. In summary, our research has shown that metabolic herbicide resistance mediated by CYP89A2, contributes to quizalofop-p-ethyl resistance in P. fugax.

First Asp-2078-Gly Mutation Conferring Resistance to Different ACCase Inhibitors in a Polypogon fugax Population from China.

Asia minor bluegrass (Polypogon fugax) is a common and problematic weed throughout China. P. fugax that is often controlled by acetyl-CoA carboxylase (ACCase) inhibitors in canola fields. Herein, we confirmed a P. fugax population (R) showing resistance to all ACCase inhibitors tested with resistance indexes ranging from 5.4-18.4. We further investigated the resistance mechanisms of this R population. Molecular analyses revealed that an amino acid mutation (Asp-2078-Gly) was present in the R population by comparing ACCase gene sequences of the sensitive population (S). In addition, differences in susceptibility between the R and S population were unlikely to be related to herbicide metabolism. Furthermore, a new derived cleaved amplified polymorphic sequence (dCAPS) method was developed for detecting the Asp-2078-Gly mutation in P. fugax efficiently. We found that 93.75% of plants in the R population carried the Asp-2078-Gly mutation, and all the herbicide-resistant phenotype of this R population is inseparable from this mutation. This is the first report of cross resistance to ACCase inhibitors conferred by the Asp-2078-Gly target-site mutation in P. fugax. The research suggested the urgent need to improve the diversity of weed management practices to prevent the widespread evolution of herbicide resistance in P. fugax in China.

[Value of Head and Neck CT Angiography in the Clinical Evaluation of Intraoperative Bleeding Volume of Carotid Body Tumours].

Objective To investigate the value of head and neck CT angiography(CTA)in the evaluation of intraoperative hemorrhage of carotid body tumours. Methods Head and neck CTA images of 36 patients with carotid body tumours confirmed by pathology were retrospectively analyzed.Patients were divided into two groups based on the intraoperative bleeding volume:<500 ml and≥500 ml groups.The patient's age,sex,Shamblin classification,size of the lesion,number of blood supply arteries,course of the disease,plain scan,and enhanced CT value between two groups were compared and analyzed.Logistics regression equation was established based on the CTA parameters with significant differences between the two intraoperative bleeding volume groups,and combined parameter was acquired.The receiver operating characteristic curve was established based on CTA single and combined parameters. Results The bleeding volume during the operation of carotid body tumors was significantly correlated with the age of patients(P=0.019),the maximum diameter of tumours on axial images(P=0.003),the maximum upper and lower diameters(P=0.004),Shamblin classification(P=0.012),and number of blood supply arteries(P<0.001).The area under the receiver operating characteristic curve of the number of feeding arteries,the maximum diameter of axial images,maximum upper and lower diameters,Shamblin classification,and combined parameters were 0.865,0.781,0.806,0.766,and 0.927,respectively.When the optimal critical value was 0.408,the Youden index was 0.794,and the corresponding accuracy,sensitivity,and specificity were 0.919,0.909,and 0.923,respectively. Conclusions Preoperative head and neck CTA can be used to evaluate the intraoperative blood loss.Combined parameters has the best diagnostic performance compared with single parameters.

Target-site and non-target-site resistance mechanisms confer mesosulfuron-methyl resistance in Alopecurus aequalis.

BACKGROUND: Shortawn foxtail (Alopecurus aequalis Sobol.) is a noxious weed in China. The resistance of A. aequalis developed rapidly due to the long-term application of acetolactate synthase (ALS)-inhibiting herbicides. Here, a suspected mesosulfuron-methyl-resistant A. aequalis population, Aa-R, was collected from a wheat field in China. RESULTS: A dose‒response test showed that the Aa-R population has evolved a high level of resistance to mesosulfuron-methyl, and its growth was suppressed by imazamox, pyroxsulam and bispyribac-sodium. ALS gene sequence analysis revealed that a known resistance-related mutation (Pro-197-Thr) was present in the Aa-R population. Moreover, ALS gene overexpression was detected in the Aa-R population. The mesosulfuron-methyl resistance could be reversed by cytochrome P450 monooxygenase (CYP450) and glutathione S-transferase (GST) inhibitors. In addition, enhanced metabolism of mesosulfuron-methyl was detected in the Aa-R population compared with the susceptible population. NADPH-cytochrome P450 reductase and GST activities were strongly inducible in the Aa-R population. One CYP450 gene, CYP74A2, and one GST gene, GST4, were constitutively upregulated in the Aa-R population. Molecular docking results showed the binding affinity of CYP74A2 and GST4 for the tested ALS-inhibiting herbicides, respectively. CONCLUSION: This study confirmed that target-site resistance and non-target-site resistance involving CYP450 and GST were the main mechanisms involved in resistance in the mesosulfuron-methyl-resistant A. aequalis population.

Unilateral Biportal Endoscopic Discectomy versus Percutaneous Endoscopic Interlaminar Discectomy for Lumbar Disc Herniation.

Background: As the latest endoscopic spine surgery, percutaneous endoscopic interlaminar discectomy (PEID) and unilateral biportal endoscopic (UBE) discectomy have distinct technical characteristics. This study aimed to evaluate the clinical outcomes of PEID and UBE discectomy in the treatment of single-level lumbar disc herniation (LDH). Methods: Between February 2019 and April 2022, 115 patients with single-level LDH at L4-5 or L5-S1 received PEID or UBE discectomy. The patients were separated into two groups based on the surgical method used: Group 1 (the PEID group) (n = 60) and Group 2 (the UBE group) (n = 55). Various parameters, including operative time, hospitalization time, fluoroscopy frequency, total costs, complications, visual analogue scale (VAS), and Oswestry Disability Index (ODI), were evaluated and compared between the two groups. Results: There were no significant differences in the VAS and ODI scores in 12 months after the operation between two groups (P > 0.05). However, the VAS of lower back pain on the first day after the operation in Group 2 (2.53±0.89) was higher than that in Group 1 (2.19±0.74) (P < 0.05). There were no significant differences in the operation time and incidence of complications between two groups (P > 0.05). But total costs in Group 2 (43,121±4280) were significantly higher than those in Group 1 (30,069±3551) (P < 0.05). Conclusion: Both UBE and PEID procedures have similar efficacy in alleviating pain and improving functional ability in patients with LDH. However, UBE surgery results in higher costs than PEID surgery.

High-Resolution X-ray Image from Copper-Based Perovskite Hybrid Polymer.

Cs3Cu2I5 nanocrystals (NCs) are considered to be promising materials due to their high photoluminescence efficiency, lack of lead toxicity, and X-ray responsiveness. However, during the crystallization process, NCs are prone to agglomeration and exhibit uneven size distribution, resulting in several light scattering that severely affect their imaging resolution. Herein, we successfully developed a high-resolution scintillator film by growing copper-based perovskite NCs within a hybrid polymer matrix. By leveraging the ingenious integration of polyvinylidene fluoride (PVDF) and polymethyl methacrylate (PMMA), the size and distribution uniformity of Cs3Cu2I5 NCs can be effectively controlled. Consequently, a high spatial resolution of 14.3 lp mm-1 and a low detection limit of 105 nGy s-1 are achieved, and the scintillator film has excellent flexibility and stability. These results highlight the promising application of Cs3Cu2I5 scintillator films in low-cost, flexible, and high-performance medical imaging.

Pressure-induced phase transitions and correlation between structure and superconductivity in iron-based superconductor Ce(O(0.84)F(0.16))FeAs.

High-pressure angle-dispersive X-ray diffraction experiments on iron-based superconductor Ce(O(0.84)F(0.16))FeAs were performed up to 54.9 GPa at room temperature. A tetragonal to tetragonal isostructural phase transition starts at about 13.9 GPa, and a new high-pressure phase has been found above 33.8 GPa. At pressures above 19.9 GPa, Ce(O(0.84)F(0.16))FeAs completely transforms to a high-pressure tetragonal phase, which remains in the same tetragonal structure with a larger a-axis and smaller c-axis than those of the low-pressure tetragonal phase. The structure analysis shows a discontinuity in the pressure dependences of the Fe-As and Ce-(O, F) bond distances, as well as the As-Fe-As and Ce-(O, F)-Ce bond angles in the transition region, which correlates with the change in T(c) of this compound upon compression. The isostructural phase transition in Ce(O(0.84)F(0.16))FeAs leads to a drastic drop in the superconducting transition temperature T(c) and restricts the superconductivity at low temperature. For the 1111-type iron-based superconductors, the structure evolution and following superconductivity changes under compression are related to the radius of lanthanide cations in the charge reservoir layer.

Taming Self-Supervised Learning for Presentation Attack Detection: De-Folding and De-Mixing.

Biometric systems are vulnerable to presentation attacks (PAs) performed using various PA instruments (PAIs). Even though there are numerous PA detection (PAD) techniques based on both deep learning and hand-crafted features, the generalization of PAD for unknown PAI is still a challenging problem. In this work, we empirically prove that the initialization of the PAD model is a crucial factor for generalization, which is rarely discussed in the community. Based on such observation, we proposed a self-supervised learning-based method, denoted as DF-DM. Specifically, DF-DM is based on a global-local view coupled with de-folding and de-mixing to derive the task-specific representation for PAD. During de-folding, the proposed technique will learn region-specific features to represent samples in a local pattern by explicitly minimizing the generative loss. While de-mixing drives detectors to obtain the instance-specific features with global information for more comprehensive representation by minimizing the interpolation-based consistency. Extensive experimental results show that the proposed method can achieve significant improvements in terms of both face and fingerprint PAD in more complicated and hybrid datasets when compared with the state-of-the-art methods. When training in CASIA-FASD and Idiap Replay-Attack, the proposed method can achieve an 18.60% equal error rate (EER) in OULU-NPU and MSU-MFSD, exceeding the baseline performance by 9.54%. The source code of the proposed technique is available at https://github.com/kongzhecn/dfdm.

Interfacial Designs of MXenes for Mild Aqueous Zinc-Ion Storage.

Limited Li resources, high cost, and safety risks of using organic electrolytes have stimulated a strong motivation to develop non-Li aqueous batteries. Aqueous Zn-ion storage (ZIS) devices offer low-cost and high-safety solutions. However, their practical applications are at the moment restricted by their short cycle life arising mainly from irreversible electrochemical side reactions and processes at the interfaces. This review sums up the capability of using 2D MXenes to increase the reversibility at the interface, assist the charge transfer process, and thereby improve the performance of ZIS. First, they discuss the ZIS mechanism and irreversibility of typical electrode materials in mild aqueous electrolytes. Then, applications of MXenes in different ZIS components are highlighted, including as electrodes for Zn2+ intercalation, protective layers of Zn anode, hosts for Zn deposition, substrates, and separators. Finally, perspectives are put forward on further optimizing MXenes to improve the ZIS performance.

Early crystallization of amorphous selenium under high pressure studied by synchrotron XRD method.

The amorphous selenium (a-Se) was studied via x-ray diffraction (XRD) under pressures ranging from ambient pressure up to 30 GPa at room temperature to study its high-pressure behavior. Two compressional experiments on a-Se samples, with and without heat treatment, respectively, were conducted. Contrary to the previous reports that a-Se crystallized abruptly at around 12 GPa, in this work we report an early partially crystallized state at 4.9 GPa before completing the crystallization at around 9.5 GPa based onin-situhigh pressure XRD measurements on the a-Se with 70 °C heat treatment. In comparison, crystallization pressure on another a-Se sample without thermal treatment history was observed to be 12.7 GPa, consistent with the previously reported crystallization pressure. Thus, it is proposed in this work that prior heat treatment of a-Se can result in an earlier crystallization under high pressure, which helps to understand the possible mechanism caused by the previous controversial reports on pressure induced crystallization behavior in a-Se.

Depth and contaminant-shaped bacterial community structure and assembly at an aged chlorinated aliphatic hydrocarbon-contaminated site.

Chlorinated aliphatic hydrocarbons (CAHs) are potentially toxic substances that have been detected in various contaminated environments. Biological elimination is the main technique of detoxifying CAHs in the contaminated sites, but the soil bacterial community at CAH-contaminated sites have been little investigated. Here, high-throughput sequencing analysis of soil samples from different depths (to 6 m depth) at an aged CAH-contaminated site has been conducted to investigate the community composition, function, and assembly of soil bacteria. The alpha diversity of the bacterial community significantly increased with increasing depth and bacterial community also became more convergent with increasing depth. Organohalide-respiring bacteria (OHRB) is considered keystone taxa to reduce the environmental stress of CAHs by reductive dechlorinate CAHs into nontoxic products, increases the alpha diversity of bacterial community and improves the stability of bacterial co-occurrence network. The high concentration of CAHs in deep soil and the stable anaerobic environment make deterministic processes dominate bacterial community assembly, while the topsoil is dominated by dispersal limitation. In general, CAHs at contaminated sites have a great impact on bacterial community, but the CAHs metabolic community acclimated in deep soil can reduce the environmental stress of CAHs, which provides foundation for the monitored natural attenuation technology in CAHs-contaminated sites.