POM@ZIF Derived Mixed Metal Oxide Catalysts for Sustained Electrocatalytic Oxygen Evolution.

The design of efficient and stable oxygen evolution reaction (OER) catalysts based on noble-metal-free materials is crucial for energy conversion and storage. In this work, it was demonstrated how polyoxometalate (POM)-doped ZIF-67 can be converted into a stable oxygen evolution electrocatalyst by chemical etching, cation exchange, and thermal annealing steps. Characterization by X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and Raman spectroscopy indicate that POM-doped ZIF-67 derived carbon-supported metal oxides were synthesized. The resulting composite shows structural and compositional advantages which lead to low overpotential (306 mV at j=10 mA ⋅ cm-2 ) and long-term stability under harsh OER conditions (1.0 M aqueous KOH).

Hydrogenation Catalysis by Hydrogen Spillover on Platinum-Functionalized Heterogeneous Boronic Acid-Polyoxometalates.

The activation of molecular hydrogen is a key process in catalysis. Here, we demonstrate how polyoxometalate (POM)-based heterogeneous compounds functionalized with Platinum particles activate H2 by synergism between a hydrogen spillover mechanism and electron-proton transfer by the POM. This interplay facilitates the selective catalytic reduction of olefins and nitroarenes with high functional group tolerance. A family of polyoxotungstates covalently functionalized with boronic acids is reported. In the solid-state, the compounds are held together by non-covalent interactions (π-π stacking and hydrogen bonding). The resulting heterogeneous nanoscale particles form stable colloidal dispersions in acetonitrile and can be surface-functionalized with platinum nanoparticles by in situ photoreduction. The resulting materials show excellent catalytic activity in hydrogenation of olefins and nitrobenzene derivatives under mild conditions (1 bar H2 and room temperature).

Molecular Iron Oxide Clusters Boost the Oxygen Reduction Reaction of Platinum Electrocatalysts at Near-Neutral pH.

The oxygen reduction reaction (ORR) is a key energy conversion process, which is critical for the efficient operation of fuel cells and metal-air batteries. Here, we report the significant enhancement of the ORR-performance of commercial platinum-on-carbon electrocatalysts when operated in aqueous electrolyte solutions (pH 5.6), containing the polyoxoanion [Fe28 (µ3 -O)8 (L-(-)-tart)16 (CH3 COO)24 ]20- . Mechanistic studies provide initial insights into the performance-improving role of the iron oxide cluster during ORR. Technological deployment of the system is demonstrated by incorporation into a direct formate microfluidic fuel cell (DFMFC), where major performance increases are observed when compared with reference electrolytes. The study provides the first examples of iron oxide clusters in electrochemical energy conversion and storage.

High Proton-Conductivity in Covalently Linked Polyoxometalate-Organoboronic Acid-Polymers.

The controlled bottom-up design of polymers with metal oxide backbones is a grand challenge in materials design, as it could give unique control over the resulting chemical properties. Herein, we report a 1D-organo-functionalized polyoxometalate polymer featuring a purely inorganic backbone. The polymer is self-assembled from two types of monomers, inorganic Wells-Dawson-type polyoxometalates, and aromatic organo-boronates. Their covalent linkage results in 1D polymer strands, which combine an inorganic oxide backbone (based on B-O and Nb-O linkages) with functional organic side-chains. The polymer shows high bulk proton conductivity of up to 1.59×10-1  S cm-1 at 90 °C and 98 % relative humidity. This synthetic approach could lead to a new class of organic-inorganic polymers where function can be designed by controlled tuning of the monomer units.

Cobalt Nanoparticles and Atomic Sites in Nitrogen-Doped Carbon Frameworks for Highly Sensitive Sensing of Hydrogen Peroxide.

In situ monitoring of hydrogen peroxide (H2 O2 ) during its production process is needed. Here, an electrochemical H2 O2 sensor with a wide linear current response range (concentration: 5 × 10-8 to 5 × 10-2 m), a low detection limit (32.4 × 10-9 m), and a high sensitivity (568.47 µA mm-1 cm-2 ) is developed. The electrocatalyst of the sensor consists of cobalt nanoparticles and atomic Co-Nx moieties anchored on nitrogen doped carbon nanotube arrays (Co-N/CNT), which is obtained through the pyrolysis of the sandwich-like urea@ZIF-67 complex. More cobalt nanoparticles and atomic Co-Nx as active sites are exposed during pyrolysis, contributing to higher electrocatalytic activity. Moreover, a portable screen-printed electrode sensor is constructed and demonstrated for rapidly detecting (cost ≈40 s) H2 O2 produced in microbial fuel cells with only 50 µL solution. Both the synthesis strategy and sensor design can be applied to other energy and environmental fields.

Bulk Nanostructuring of Janus-Type Metal Electrodes.

The stable deposition of reactive nanostructures on metal electrodes is a key process for modern technologies including energy conversion/ storage, electrocatalysis or sensing. Here a facile, scalable route is reported, which allows the bulk nanostructuring of copper foam electrodes with metal, metal oxide or metal hydroxide nanostructures. A concentration-gradient driven synthetic approach enables the fabrication of Janus-type electrodes where one face features Cu(OH)2 nanowires, while the other face features CuO nanoflowers. Thermal or chemical conversion of the nanostructured surfaces into copper oxide or copper metal is possible whilst retaining the respective nanostructure morphologies. As proof of concept, the functionalized electrodes are promising in electrocatalytic water oxidation and water reduction reactions.

Bottom-up Design of Bimetallic Cobalt-Molybdenum Carbides/Oxides for Overall Water Splitting.

Earth-abundant transition-metal-based catalysts for electrochemical water splitting are critical for sustainable energy schemes. In this work, we use a rational design method for the synthesis of ultrasmall and highly dispersed bimetallic CoMo carbide/oxide particles deposited on graphene oxide. Thermal conversion of the molecular precursors [H3 PMo12 O40 ], Co(OAc)2 ⋅4 H2 O and melamine in the presence of graphene oxide gives the mixed carbide/oxide (Co6 Mo6 C2 /Co2 Mo3 O8 ) nanoparticle composite deposited on highly dispersed, N,P-doped carbon. The resulting composite shows outstanding electrocatalytic water-splitting activity for both the oxygen evolution and hydrogen evolution reaction, and superior performance to reference samples including commercial 20 % Pt/C & IrO2 . Electrochemical and other materials analyses indicate that Co6 Mo6 C2 is the main active phase in the composite, and the N,P-doping of the carbon matrix increases the catalytic activity. The facile design could in principle be extended to multiple bimetallic catalyst classes by tuning of the molecular metal oxide precursor.

Transition-Metal Oxides/Carbides@Carbon Nanotube Composites as Multifunctional Electrocatalysts for Challenging Oxidations and Reductions.

The rapid development of renewable-energy technologies such as water splitting, rechargeable metal-air batteries, and fuel cells requires highly efficient electrocatalysts capable of the oxygen-reduction reaction (ORR) and the oxygen-evolution reaction (OER). Herein, we report a facile sonication-driven synthesis to deposit the molecular manganese vanadium oxide precursor [Mn4 V4 O17 (OAc)3 ]3- on multiwalled carbon nanotubes (MWCNTs). Thermal conversion of this composite at 900 °C gives nanostructured manganese vanadium oxides/carbides, which are stably linked to the MWCNTs. The resulting composites show excellent electrochemical reactivity for ORR and OER, and significant reactivity enhancements compared with the precursors and a Pt/C reference are reported. Notably, even under harsh acidic conditions, long-term OER activity at low overpotential is reported. In addition, we report exceptional activity of the composites for the industrially important Cl2 evolution from an aqueous HCl electrolyte. The new composite material shows how molecular deposition routes leading to highly active and stable multifunctional electrocatalysts can be developed. The facile design could in principle be extended to multiple catalyst classes by tuning of the molecular metal oxide precursor employed.

Breast milk concentration of hydroxychloroquine in Chinese lactating women with connective tissue diseases.

PURPOSE: Considering the very limited while varying information about the excretion of hydroxychloroquine (HCQ) into human milk, we sought to determine the breast milk concentrations of HCQ in Chinese lactating patients with connective tissue diseases to assess the safety of HCQ in infants of this population. METHODS: Breastfeeding women who had been on HCQ for at least 1 year were recruited. Milk samples were collected at five time points over 12 h. Breast milk HCQ levels were measured by a validated high-performance liquid chromatography (HPLC) assay. According to the general daily milk consumption of 0.15 L/kg for an infant, the dose of HCQ received by the infants via breastfeeding was calculated. RESULTS: Thirty-three patients completed the study who received HCQ treatment with the following regimens: 0.1 g bid (n = 3), 0.2 g qd (n = 8), 0.2 g bid (n = 21), and 0.2 g qod (n = 1). The mean breast milk HCQ levels (µg/mL) over the 12-h sampling period for each dosage regimen group were 0.4, 0.7, 1.4, and 0.4, respectively. The dose of HCQ (mg) received by the infants via breastfeeding would be 0.4, 0.4, 0.9, and 0.2, which were 0.26%, 0.26%, 0.29%, and 0.26% of the daily maternal doses, respectively. The infant's weight-adjusted relative dose (mg/kg) was 0.1, 0.1, 0.2, and 0.1, respectively, equivalent to 1.9%, 3.0%, 3.0%, and 3.2% of the maternal dose per kilogram body weight, respectively. CONCLUSION: Our study found that HCQ has very low concentrations in breast milk. It is probably safe for the patients to give breastfeeding during HCQ therapy period.

Modular Design of Noble-Metal-Free Mixed Metal Oxide Electrocatalysts for Complete Water Splitting.

Electrocatalytic water splitting into H2 and O2 is a key technology for carbon-neutral energy. Here, we report a modular materials design leading to noble metal-free composite electrocatalysts, which combine high electrical conductivity, high OER and HER reactivity and high durability. The scalable bottom-up fabrication allows the stable deposition of mixed metal oxide nanostructures with different functionalities on copper foam electrodes. The composite catalyst shows sustained OER and HER activity in 0.1 m aqueous KOH over prolonged periods (t>10 h) at low overpotentials (OER: ≈300 mV; HER: ≈100 mV) and high faradaic efficiencies (OER: ≈100 %, HER: ≈98 %). The new synthetic concept will enable the development of multifunctional, mixed metal oxide composites as high-performance electrocatalysts for challenging energy conversion and storage reactions.

Controlled Synthesis of Silver Micro/Nano Leaves for Oxygen Reduction and CO2 Reduction.

In this study, three different Ag micro/nano leaves were successfully synthesized through a galvanic displacement reaction by adjusting the concentration of Ag+. The catalytic activities of the prepared Ag micro/nano leaves toward ORR showed strong dependence on their morphology. An optimal concentration of Ag+ can result in a well-defined Ag micro/nano leaves with both crystallization and surface area, which showed the best activity towards ORR in alkaline media. In addition, the prepared Ag micro/nano leaves also showed high activity towards CO2 reduction, which required a potential of -0.8 V versus RHE to selectively convert CO2 to CO with the faradaic efficiency at about 20%. Compared with the Ag plate at the same overpotential, the FE has increased by 5-fold.

Mixed-Valent Mn16-Containing Heteropolyanions: Tuning of Oxidation State and Associated Physicochemical Properties.

The two 16-manganese-containing, Keggin-based 36-tungsto-4-silicates [Mn(III)10Mn(II)6O6(OH)6(PO4)4(A-α-SiW9O34)4](28-) (1) and [Mn(III)4Mn(II)12(OH)12(PO4)4(A-α-SiW9O34)4](28-) (2) have been prepared by reaction of the trilacunary Keggin precursor [A-α-SiW9O34](10-) with either Mn(OOCCH3)3·2H2O (for 1) or MnCl2·4H2O (for 2), in aqueous phosphate solution at pH 9. Polyanions 1 and 2 comprise mixed-valent, cationic {Mn(III)10Mn(II)6O6(OH)6}(24+) and {Mn(III)4Mn(II)12(OH)12}(24+) cores, respectively, encapsulated by four phosphate groups and four {SiW9} units in a tetrahedral fashion. Both polyanions were structurally and compositionally characterized by single-crystal XRD, IR, thermogravimetric analysis, and X-ray absorption spectroscopy. Furthermore, studies were performed probing the magnetic, electrochemical, oxidation catalytic, and Li-ion battery performance of 1 and 2.

Sequential Synthesis of 3 d-3 d, 3 d-4 d, and 3 d-5 d Hybrid Polyoxometalates and Application to the Electrocatalytic Oxygen Reduction Reactions.

The Co7 (AlePy)2 polyoxometalate, which encloses a {(PW9 )2 Co(II) 7 } core covalently bound to two free aminopyridine groups through bisphosphonate ligands (AlePy), has been isolated. It can be used as a precursor, allowing the synthesis of heterometallic hybrid compounds, as illustrated by the characterization of cobalt/zinc (Co7 (AlePyZn)2 ), cobalt/palladium (Co7 (AlePyPd)2 ), and cobalt/platinum (Co7 (AlePyPt)2 ) species. A composite based on the water-insoluble precious metal-free Co7 (AlePyZn)2 compound and the low-cost carbon material Vulcan XC-72 has been selected as a cathode material (Co7 Zn/C) for oxygen reduction reaction studies. The electrocatalytic performances of the Co7 Zn/C hybrids were assessed at neutral and basic pH, showing that Co7 Zn/C exhibits high selectivity for the four-electron reduction of O2 . Moreover, its durability is superior to that of a commercial Pt/C catalyst with 20 % loading. Also, comparative studies performed in the presence of methanol have indicated that Co7 Zn/C has a much better tolerance to the crossover effect than Pt/C. Altogether, these results indicate for the first time that, even in neutral media, polyoxometalate/carbon composites can represent low-cost oxygen reduction catalysts that can function stably, for a long time, and with high performance.

Multinuclear cobalt(II)-containing heteropolytungstates: structure, magnetism, and electrochemistry.

Interaction of the trilacunary Keggin polyanions [A-α-XW9O34](10-) (X = Si(IV), Ge(IV)) with Co(II) and phosphate ions in aqueous, basic media and under mild heating leads to the formation of the tetrameric, Co16-containing heteropolytungstates [{Co4(OH)3PO4}4(A-α-XW9O34)4](32-) (X = Si(IV), Ge(IV)). Both polyanions were characterized in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric and elemental analyses. Furthermore, the electrochemical and magnetic properties of these isostructural polyanions were investigated.

Graphene-CdS quantum dots-polyoxometalate composite films for efficient photoelectrochemical water splitting and pollutant degradation.

rGO-CdS-H2W12 nanocomposite film was successfully fabricated by a layer-by-layer self-assembly method. The composite film was characterized by techniques such as UV-Vis spectra, XPS, and AFM. The composite film showed high photoelectronic response under the illumination of sunlight. Both current-voltage curves and photocurrent transient measurements demonstrated that the photocurrent response of the rGO-CdS-H2W12 composite film was enhanced five-fold compared with CdS film. This can be attributed to the photoinduced electron transfer between CdS, H2W12 and rGO, which promotes the charge separation efficiency of CdS. The introduction of GO enhanced the charge separation and transportation. More importantly, various pollutants can be treated as electron donors, and can thus be degraded and produce hydrogen at the same time, at a low bias voltage under the irradiation of solar light.

Carbon quantum dots as novel sensitizers for photoelectrochemical solar hydrogen generation and their size-dependent effect.

As a result of global energy needs, much research has been devoted to the conversion of solar energy to various usable forms, such as chemical energy in the form of hydrogen via water splitting. To make the conversion methods efficient, economically practical, and industrially scalable, sensitizers capable of utilizing visible and near infrared (IR) light need to be developed. Herein, water-soluble, colloidally stable carbon quantum dots (CQDs) are successfully synthesized by a facile one-step alkali-assisted electrochemical method. Owing to their broad visible light absorption, upconversion luminescence properties and efficient electron injection to TiO2, these CQDs can be used as the sensitizer for photoelectrochemical cells and show an optimized photocurrent of 1.2 mA cm(-2) at 0 V versus Ag/AgCl under 100 mW cm(-2) simulated sunlight. The above results indicate that the elementally abundant and environmentally friendly CQDs, as a novel sensitizer, can surely be employed to make full use of the visible spectrum of sunlight for their application in photovoltaic devices.

Facile decoration of Au nanoparticles on CdS nanorods by polyoxometalate with enhanced photocatalytic activities toward hydrogen evolution.

The tri-component hybrid CdS nanorods (NRs)/Au nanoparticles (NPs)@polyoxometalate (POM) was successfully prepared by a facile, efficient and green method. The structural properties and component analysis were studied by Transmission electron microscopy (TEM), X-ray Diffraction (XRD) and UV-Vis spectra. The POMs sever as not only reductant and bridge molecules, but also as co-catalyst to play an important role in the photocatalytic process. The as-prepared nanohybrid shows obviously enhanced photocatalytic activity toward photocatalytic evolution of hydrogen.

Facile synthesis of Au-nanoparticle/polyoxometalate/graphene tricomponent nanohybrids: an enzyme-free electrochemical biosensor for hydrogen peroxide.

A green, facile, one-pot synthesis of well-defined Au NPs@POM-GNSs tricomponent nanohybrids is reported (POM stands for polyoxometalate and GNSs for graphene nanosheets). The synthesis is convenient, rapid and environmentally friendly. The POMs serve as both reducing, encapsulating molecules, and bridging molecules; this avoids the introduction of other organic toxic molecules. Characterization using transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy analysis is performed, and the structure of the prepared nanohybrids of Au NPs@POM-GNSs is verified. Most importantly, the amperometric measurements show the Au NPs@POM-GNSs nanohybrids have high catalytic activity with good sensitivity, good long-term stability, wide linear range, low detection limit, and fast response towards H(2)O(2) detection for application as an enzyme-free biosensor. Transformation of the POMs during H(2)O(2) detection does not affect the catalytic activities of the nanohybrids. Thus, the synergistic effect of Au NPs and GNSs in the nanohybrids leads to the enhanced catalytic property.

Management guideline for the off-label use of medicine in China (2021).

BACKGROUND: Off-label drug use embodies a thorough clinical diagnosis and evaluation of treatment needs and should not be confused with unreasonable drug use, but it also faces potential risks with drug safety and legal issues. RESEARCH DESIGN AND METHODS: We first established a guideline working group. Following the guideline development process recommended by the World Health Organization Handbook and the Chinese Medical Association, the key questions were determined through literature searches of PubMed, CNKI (Chinese National Knowledge Infrastructure) and other databases. Both the evidence and the clinicians' diagnosis and treatment workload were considered to formulate the initial recommendations. Finally, two rounds of Delphi surveys and one expert seminar were organized to determine the final recommendations of this guideline. Meanwhile, we graded the recommendations based on the body of evidence. RESULTS: We determined nine questions and proposed a total of 23 recommendations regarding the definition of off-label use of drugs, applicable circumstances, classification of evidence, informed consent, legal basis, adverse drug reaction monitoring and evaluation, management procedure, responsibilities and obligations of different stakeholders, medical insurance reimbursement, and the national approval system. CONCLUSIONS: This guideline standardized clinical off-label drug use and provided suggestions and references for the management of off-label drug use.

Pathogenesis of sarcopenia and the relationship with fat mass: descriptive review.

Age-associated obesity and muscle atrophy (sarcopenia) are intimately connected and are reciprocally regulated by adipose tissue and skeletal muscle dysfunction. During ageing, adipose inflammation leads to the redistribution of fat to the intra-abdominal area (visceral fat) and fatty infiltrations in skeletal muscles, resulting in decreased overall strength and functionality. Lipids and their derivatives accumulate both within and between muscle cells, inducing mitochondrial dysfunction, disturbing ß-oxidation of fatty acids, and enhancing reactive oxygen species (ROS) production, leading to lipotoxicity and insulin resistance, as well as enhanced secretion of some pro-inflammatory cytokines. In turn, these muscle-secreted cytokines may exacerbate adipose tissue atrophy, support chronic low-grade inflammation, and establish a vicious cycle of local hyperlipidaemia, insulin resistance, and inflammation that spreads systemically, thus promoting the development of sarcopenic obesity (SO). We call this the metabaging cycle. Patients with SO show an increased risk of systemic insulin resistance, systemic inflammation, associated chronic diseases, and the subsequent progression to full-blown sarcopenia and even cachexia. Meanwhile in many cardiometabolic diseases, the ostensibly protective effect of obesity in extremely elderly subjects, also known as the 'obesity paradox', could possibly be explained by our theory that many elderly subjects with normal body mass index might actually harbour SO to various degrees, before it progresses to full-blown severe sarcopenia. Our review outlines current knowledge concerning the possible chain of causation between sarcopenia and obesity, proposes a solution to the obesity paradox, and the role of fat mass in ageing.