Clinical analysis of a new multifunctional instrument set for gasless endoscopic thyroidectomy with two different approaches.

BACKGROUND: Following the rapid development of endoscopic thyroidectomy techniques, various surgical procedures have been developed (e.g., transoral, submandibular, areolar, axillary, retroauricular, and combined procedures), and each of these procedures has its own advantages. In recent years, gasless endoscopic thyroidectomy has emerged as a feasible procedure, and it has replaced traditional CO2 insufflation approaches because of advantages such as stable cavity construction, pollution reduction, resource saving, and risk reduction. However, each gasless procedure requires special instruments for cavity construction, and this results in enormous wastage of medical resources. In the present study, we introduced a set of instruments developed by our team. This set of instruments is designed to be compatible with the current gasless endoscopic thyroidectomy approaches, including transoral, submandibular, transareolar, transaxillary, retroauricular, combined, and lateral cervical lymph node dissection. Here, we introduced this set of instruments for two gasless endoscopic thyroidectomy procedures (transaxillary and transareolar). Following the incorporation of this set of instruments in regular clinical practice, it could be used for more gasless endoscopic thyroidectomy procedures in the future. OBJECTIVE: To investigate the feasibility, safety, and efficacy of the self-developed instruments for gasless endoscopic thyroidectomy in two different approaches. METHODS: A total of 180 patients diagnosed to have papillary thyroid carcinoma (PTC) between January 2020 and April 2022 were retrospectively investigated. The patients were assigned to a gasless transaxillary group (group A) and a gasless transareolar group (group B). The same gasless endoscopic-assisted instruments were used for both groups. The clinical characteristics, treatment results, and complications were compared between the two groups. RESULTS: All 180 patients were successfully operated. The extent of surgical resection in all patients was the same: "unilateral glandular lobectomy + isthmus combined with ipsilateral central zone lymph node dissection." There were 130 and 50 patients in group A and group B, respectively; one patient in the former group was converted to open surgery due to intraoperative bleeding. No significant difference was observed between the two groups in terms of gender, age, body mass index (BMI), education level, and proportion of concomitant Hashimoto's thyroiditis (P > 0.05). The establishment of cavity time was significantly longer in group A than in group B (35.62 ± 5.07 min vs. 17.46 ± 2.55 min, P < 0.01). The number of lymph nodes cleared was slightly less in group A than in group B (4.06 ± 2.93 vs. 4.52 ± 2.38, P = 0.07). Moreover, the two groups showed no significant differences (P > 0.05) in the total operative time (145.54 ± 45.11 min vs. 143.06 ± 46.70 min), tumor size (0.68 ± 0.46 cm vs. 0.71 ± 0.49 cm), postoperative hospital stay (4.08 ± 1.48 days vs. 3.72 ± 1.07 days), vocal cord paralysis [4 (3.1%) vs. 2 (4%)], postoperative swallowing discomfort [24 (18.5%) vs. 5 (10%)], and postoperative recurrence and satisfaction scores (3.27 ± 1.52 vs. 3.28 ± 1.53). CONCLUSION: Although the two approaches of gasless endoscopic surgery have different operative paths and different time periods for cavity construction, both approaches are similar in terms of the principle of cavity construction, safe and reliable postoperative efficacy, and good cosmetic effect. Therefore, the same set of instruments can be used to complete the surgery in both approaches, thus saving medical resources and facilitating the popularization of this technology.

[Development and Clinical Application of Multifunctional Inflation-Free Lumpectomy Aid].

To investigate the value of self-developed air-free laparoscopic auxiliary instruments in the clinical application of thyroid diseases. The clinical data of 70 transaxillary and 45 transareolar air-free laparoscopic surgeries for thyroid cancer and 40 conventional open surgeries were retrospectively compared. The transaxillary and transareolar laparoscopic groups had significantly longer operative times than the open group, while the postoperative satisfaction was higher in the endoscopic group than in the open group. This set of instruments has advantage of novel design, scientific structure, safe application. It can be compatible with a variety of thyroid and breast air-free laparoscopic procedures, which can promote the development and popularization of laparoscopic technology.

Comparison of surgical smoke between two approaches for endoscopic thyroidectomy and open thyroidectomy.

BACKGROUND: Surgical smoke has been recognized as a potential health risk by an increasing number of researchers. Moreover, the counts of surgical smoke produced during different surgical approaches are different. This study aimed to measure and compare the particulate matter (PM) of surgical smoke generated during open thyroidectomy and two endoscopic approaches for thyroidectomy to provide guidance for safe clinical practices. METHODS: Forty-eight patients with thyroid cancer admitted to our hospital from June 2020 to December 2021 and treated with different surgical approaches were enrolled in this study. The total and peak counts of PM, dynamic changes, and other characteristics of surgical smoke produced during surgery were recorded. PM was classified as PM2.5 (size ≤ 2.5 µm) and PM10 (size ≤ 10 µm). RESULTS: In a single cut, both the peak and total counts of PM2.5 and PM10 of surgical smoke in the open thyroidectomy group (n = 15) were significantly higher than those in the breast approach endoscopic thyroidectomy with CO2 insufflation group (n = 15) and the gasless transaxillary endoscopic thyroidectomy group (n = 18) (p < 0.001). Moreover, the latter two groups showed no significant differences in the peak and total counts of PM2.5 and PM10 (p > 0.05). CONCLUSION: In thyroid surgery, more surgical smoke is produced during open thyroidectomy than during endoscopic thyroidectomy, while different endoscopic approaches showed no significant difference in surgical smoke production. Thus, endoscopic approaches outperform the open thyroidectomy approach with regard to surgical smoke production.

MiR-423-3p enhances cell growth through inhibition of p21Cip1/Waf1 in colorectal cancer.

BACKGROUND/AIMS: Colorectal cancer (CRC) is one of the leading causes of cancer-related deaths globally, with many oncogenes and tumor suppressors involved. The miRNAs are small non-coding RNAs known to play a vital role in the pathogenesis of CRC. The miR-423-3p was reported to act as an oncogene; however, its role in CRC growth remains unknown. METHODS: qPCR assay was used to detect miR-423-3p expression in CRC specimens. Cell proliferation assay and transwell assay were conducted to evaluate CRC cell proliferation and migration. Luciferase reporter assay was to identify the target gene of miR-423-3p. And tumorigenesis model was established to test the role of miR-423-3p in CRC development in vivo. RESULTS: Here, we showed that miR-423-3p was significantly up regulated in CRC tissues and cells compared with normal tissues and cells. Overexpression of miR-423-3p promoted CRC cell proliferation via enhancing the G1/S transition phase of the cell cycle, while inhibition of miR-423-3p repressed cell growth. Further studies showed that p21Cip1/Waf1 mediated the function of miR-423-3p, and overexpression of p21Cip1/Waf1 reversed the augmented effect of miR-423-3p on cell proliferation. Importantly, all these data were validated in the tumorigenesis assay in vivo. CONCLUSIONS: In conclusion, our findings demonstrated a critical impact of miR-423-3p on CRC growth.

Lysinibacter cavernae gen. nov., sp. nov., a new member of the family Microbacteriaceae isolated from a karst cave.

A Gram-stain-positive, aerobic, straight or slightly bent rod-shaped, non-motile, non-spore-forming bacterium, designated strain CC5-806T, was isolated from a soil sample collected from a wild karst cave in the Wulong region, Chongqing, PR China and examined using a polyphasic approach to clarify its taxonomic position. This bacterium did not produce substrate mycelium or aerial hyphae, and no diffusible pigments were observed on the media tested. Strain CC5-806T grew optimally without NaCl at 20 °C and at pH 7.0. Phylogenetic analysis, based on 16S rRNA gene sequences, indicated that strain CC5-806T belonged to the family Microbacteriaceae and showed the highest levels of 16S rRNA gene sequence similarities with Frigoribacterium endophyticum EGI 6500707T (97.56 %), Frigoribacterium faeni 801T (97.53 %) and Glaciihabitans tibetensis MP203T (97.42 %). Phylogenetic trees revealed that strain CC5-806T did not show a clear affiliation to any genus within the family Microbacteriaceae. The DNA G+C content of strain CC5-806T was 62.6 mol%. The cell-wall peptidoglycan contained l-lysine as a diagnostic diamino acid. The predominant menaquinones were MK-11, MK-10 and MK-9. Phosphatidylglycerol, diphosphatidylglycerol, an unidentified glycolipid, four unidentified phospholipids and other polar lipids were detected in the polar lipid extracts. The major fatty acids were anteiso-C15 : 0, iso-C16 : 0 and iso-C14 : 0. On the basis of the phylogenetic analysis, and phenotypic and chemotaxonomic characteristics, strain CC5-806T was distinguishable from phylogenetically related genera in the family Microbacteriaceae. It represents a novel species of a novel genus, for which the name Lysinibacter cavernae gen. nov., sp. nov. is proposed. The type strain is CC5-806T ( = DSM 27960T = CGMCC 1.14983T).

Nesterenkonia populi sp. nov., an actinobacterium isolated from Populus euphratica.

An alkaliphilic and moderately halophilic actinobacterium, designated strain GP10-3(T), was isolated from Populus euphratica collected from the southern edge of Taklimakan desert, Xinjiang, China. Cells of this strain were Gram-stain-positive, non-motile and non-spore-forming short rods. Strain GP10-3(T) grew optimally at 37 °C on LB agar media in the presence of 5-10% (w/v) NaCl at pH 9.0. The menaquinones were MK-7, MK-8 and MK-9. The major fatty acids (>10%) were anteiso-C17 : 0, anteiso-C15 : 0 and iso-C16 : 0. The peptidoglycan type was variation A4α, L-Lys-L-Glu. The polar lipids consisted of diphosphatidylglycerol, phosphatidylglycerol, phosphatidylglycolipid, phosphatidylcholine, phosphatidylinositol, glycolipid and an unidentified phospholipid. The DNA G+C content was 67.4 mol%. Phylogenetic analysis based on 16S rRNA gene sequence showed that strain GP10-3(T) belonged to the genus Nesterenkonia , sharing 94.6-96.9% sequence similarity with the type strains of species within this genus with validly published names. Based on the evidence of the polyphasic taxonomic study, strain GP10-3(T) represents a novel species of the genus Nesterenkonia , for which the name Nesterenkonia populi sp. nov. is proposed. The type strain is GP10-3(T) ( = DSM 27959(T) = KCTC 29119(T)).

Nocardioides deserti sp. nov., an actinobacterium isolated from desert soil.

A rod- or coccus-shaped, non-spore-forming actinobacterium, designated strain SC8A-24(T), was isolated from a soil sample collected from the rhizosphere of Alhagi sparsifolia on the southern edge of the Taklimakan desert, Xinjiang, China, and examined by a polyphasic approach to clarify its taxonomic position. This actinobacterium was Gram-staining-positive and aerobic. Substrate and aerial mycelia were not observed, and no diffusible pigments were observed on the media tested. Strain SC8A-24(T) grew optimally without NaCl at 28-30 °C and pH 7.0-8.0. Phylogenetic analysis based on the 16S rRNA gene sequence indicated that strain SC8A-24(T) belonged to the genus Nocardioides and shared the highest 16S rRNA gene sequence similarity with Nocardioides salarius CL-Z59(T) (96.51%), N. pyridinolyticus OS4(T) (96.43%) and N. ginsengagri BX5-10(T) (96.37%). The DNA G+C content of strain SC8A-24(T) was 71 mol%. The cell-wall peptidoglycan contained ll-2,6-diaminopimelic acid, and MK-8(H4) was the predominant menaquinone. The major polar lipids were phosphatidylglycerol, diphosphatidylglycerol, an unidentified glycolipid and an unidentified phospholipid. The major fatty acids were C17 : 1ω8c, 10-methyl C17 : 0 and C18 : 1ω9c. On the basis of phylogenetic analysis and phenotypic and chemotaxonomic characteristics, strain SC8A-24(T) represents a novel species of the genus Nocardioides , for which the name Nocardioides deserti sp. nov. is proposed. The type strain is SC8A-24(T) ( =DSM 26045(T)  = CGMCC 4.7183(T)).

Prauserella endophytica sp. nov., an endophytic actinobacterium isolated from Tamarix taklamakanensis.

A novel endophytic actinobacterium, designated strain SP28S-3(T), was isolated from a surface-sterilized stem of Tamarix taklamakanensis collected from the southern edge of Taklamakan desert, Xinjiang, China. Strain SP28S-3(T) was found to show chemotaxonomic and morphological properties consistent with its classification in the genus Prauserella. The polar lipids were found to consist of diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, phosphatidylmethylethanolamine, phosphoglycolipid, phosphatidylcholine, phosphatidylinositol, a glycolipid, an aminolipid and unidentified phospholipids. The major fatty acids (>10 %) were identified as iso-C16:0 and C16:0. The genomic DNA G+C content was determined to be 69.7 mol%. Phylogenetic analysis of strain SP28S-3(T) clearly showed that the strain had the highest similarity of 16S rRNA gene sequence with Prauserella coralliicola SCSIO 11529(T) (99.9 %), followed by Prauserella marina DSM 45268(T) (97.0 %) and is affiliated with the genus Prauserella. The low level (47.8 ± 5.5 %) of DNA-DNA relatedness between strain SP28S-3(T) and P. coralliicola SCSIO 11529(T) combined with other polyphasic taxonomic evidence clearly support the conclusion that strain SP28S-3(T) represents a novel Prauserella species, for which the name Prauserella endophytica sp. nov. is proposed. The type strain is SP28S-3(T) (=DSM 46655(T) = CGMCC 4.7182 (T)).

[Planting area estimation of Chinese Tibetan medicine Herpetospermum pedunculosum based on RS&GIS-by case study of Lengqi and Xinglong town in Luding county].

The herbs used as the material for traditional Chinese medicine are mostly planted at mountain areas where there is appropriate weather condition. Due to the complex terrain condition in mountain area, the planting at such places is always associated with a scattered pattern, which inevitably bring difficulty to the work of accurate measurement for the planting area. Advanced research about monitoring the planting area for medicine-herb under complex environmental condition is so critical and meaningful for developing the medicine-herb planting to a large scale and an industry. Therefore, this research, taking the planting of Herpetospermum pedunculosum in Luding county as an example, utilizes RS&GIS: using the image data from TM and ETM datum as the remote sensing information source, integrating GPS data from quadrat survey on the spots, and analyzing on a GIS platform, to extract the planting area of H. pedunculosum in Luding county. The results indicate that: (1) the method and technology used to estimate the planting area of H. pedunculosum are feasible and can be applied to monitoring the planting area of medicine-herb at mountain area under complex environmental conditions: (2) the planting area of H. pedunculosum in Luding county is estimated to be 857. 246 acres by the methods utilized in this research, which is closed to the value from local statistical data with an error range less than 5%; (3) in consideration of those inevitable errorrs generating from the procedures such as remote sensing data acquisition, data preprocessing, data interpretation, and so on, and the fact that the classification of remote sensing data, which must be implemented by those above procedures, was used directly to extract the herb type, the accuracy of area estimation for the herb is significantly influenced by the accuracy of classification for herb type, and the estimated area is inevitably associated with some error.

Characterization, mechanical properties, corrosion behavior and bone-like apatite formation ability of fluorine substituted hydroxyapatite coating.

Hydroxyapatite (HA) is a non-bioceramic commonly used in human implants in the form of coatings, which are limited in their application by mechanical and wear resistance properties, as well as biodegradability. In this study, fluorine substituted hydroxyapatite (FHA) coatings were prepared on Ti-6Al-4V surfaces by plasma spraying method using a mixture of calcium fluoride and hydroxyapatite powders. The prepared coatings were characterized by X-ray diffraction and fourier transform infrared (FTIR) spectroscopy at different levels of calcium fluoride (3 wt%, 6 wt%, 9 wt%, and 12 wt%). The biocompatibility of the coatings was evaluated by in vitro mineralization experiments. Experimental results showed that at 9 wt% of calcium fluoride, the prepared FHA coatings had better mechanical properties, with improved bond strength (28.2 MPa). The X-ray diffraction patterns of the coatings reflect the fluorine substitution during the spraying process and the 9FHA has the highest crystallinity according to the XRD analysis, which is closely related to the biological activity of the coating. In addition, Potentiodynamic polarisation showed that the sample coated with the 9FHA coating had the highest Ecorr and lowest Icorr, indicating the best corrosion resistance. The FHA coating exhibits faster apatite deposition in simulated body fluid, and the efficiency of apatite deposition increases with the increase of CaF2.

Design, Modeling, and Testing of a Long-Stroke Fast Tool Servo Based on Corrugated Flexure Units.

To further enhance the performance of the fast tool servo (FTS) system in terms of stroke, load capacity, and application area, this paper proposes a novel fast tool servo device driven by a voice coil motor (VCM), based on a three-segment uniform corrugated flexure (CF) guiding mechanism, with a large stroke, high accuracy, and high dynamics. To describe the unified static characteristics of such device, the compliance matrix method is applied to establish its model, where the influence of CF beam structural parameters on the FTS device is investigated in detail. Furthermore, resolution and positioning accuracy tests are conducted to validate the features of the system. The testing results indicate that the maximum stroke of the FTS device is up to 3.5 mm and the positioning resolution values are 3.6 µm and 2.4 µm for positive and negative stroke, respectively, which further verifies the device's effectiveness and promising application prospect in ultra-precision microstructure machining.

A Predictive Model Based on the FBXO Family Reveals the Significance of Cyclin F in Hepatocellular Carcinoma.

OBJECTIVE: The F-box protein (FBXO) family plays a key role in the malignant progression of tumors. However, the biological functions and clinical value of the FBXO family in liver cancer remain unclear. Our study comprehensively assessed the clinical value of the FBXO family in hepatocellular carcinoma (HCC) and constructed a novel signature based on the FBXO family to predict prognosis and guide precision immunotherapy. METHODS: The Cancer Genome Atlas (TCGA) and International Cancer Genome Consortium (ICGC) databases were utilized to investigate the expression characteristics and prognostic value of the FBXO family in HCC. A predictive model based on the FBXO family using TCGA database; and its predictive ability was validated using the ICGC database. Further analyses revealed that this predictive model can independently predict the overall survival (OS) rate of patients with HCC. We further analyzed the association of this predictive model with signaling pathways, clinical pathological features, somatic mutations, and immune therapy responses. Finally, we validated the biological functions of cyclin F (CCNF) through in vitro experiments. RESULTS: A predictive model involving three genes (CCNF, FBXO43, and FBXO45) was constructed, effectively identifying high and low-risk patients with differences in OS, clinicopathological characteristics, somatic mutations, and immune cell infiltration status. Additionally, knock-down of CCNF in HCC cell lines reduced cell proliferation in vitro, suggesting that CCNF may be a potential therapeutic target for HCC. CONCLUSIONS: The predictive model based on the FBXO family can effectively predict OS and the immune therapy response in HCC. Additionally, CCNF is a potential therapeutic target for HCC.

GSH-activable heterotrimeric nano-prodrug for precise synergistic therapy of TNBC.

Combination chemotherapy is an effective approach for triple-negative breast cancer (TNBC) therapy, especially when drugs are administered at specific optimal ratios. However, at present, strategies involving precise and controllable ratios based on effective loading and release of drugs are unavailable. Herein, we designed and synthesized a glutathione (GSH)--responsive heterotrimeric prodrug and formulated it with an amphiphilic polymer to obtain nanoparticles (DSSC2 NPs) for precise synergistic chemotherapy of TNBC. The heterotrimeric prodrug was prepared using docetaxel (DTX) and curcumin (CUR) at the optimal synergistic ratio of 1: 2. DTX and CUR were covalently conjugated by disulfide linkers. Compared with control NPs, DSSC2 NPs had quantitative/ratiometric drug loading, high drug co-loading capacity, better colloidal stability, and less premature drug leakage. After systemic administration, DSSC2 NPs selectively accumulated in tumor tissues and released the encapsulated drugs triggered by high levels of GSH in cancer cells. In vitro and in vivo experiments validated that DSSC2 NPs released DTX and CUR at the predefined ratio and had a highly synergistic therapeutic effect on tumor suppression in TNBC, which can be attributed to ratiometric drug delivery and synchronous drug activation. Altogether, the heterotrimeric prodrug delivery system developed in this study represents an effective and novel approach for combination chemotherapy.

Rhinacanthin C Ameliorates Insulin Resistance and Lipid Accumulation in NAFLD Mice via the AMPK/SIRT1 and SREBP-1c/FAS/ACC Signaling Pathways.

Rhinacanthin C (RC) is a naphthoquinone ester with an anti-inflammatory activity extracted from Rhinacanthus nasutus (L.) Kurz (Rn). It has been proven to improve hyperglycemia and hyperlipidemia, but the prevention and mechanism of RC in nonalcoholic fatty liver disease (NAFLD) are not clear. In the current study, we first extracted RC from Rn using ethyl acetate and identified it by HPLC, MS, and NMR. At the same time, molecular docking analysis of RC with AMPK and SREBP-1c was performed using AutoDock software. In addition, the mouse model of NAFLD was induced by a high-fat diet in vivo, and low, medium, and high concentrations of RC were used for intervention. The results showed that RC significantly reduced the body mass and liver body coefficient of NAFLD mice, inhibited liver inflammation and fat accumulation, and improved insulin resistance. Further studies showed that RC significantly reduced the levels of serum leptin and resistin, upregulated the expression levels of adiponectin and adiponectin receptor in the liver, and inhibited the expression levels of MCP-1, TNF-α, and IL-6. In terms of mechanism, RC upregulates the expression of p-AMPK and SIRT1 and downregulates the expression of p-p65, SREBP-1c, Fas, Acc-α, PPAR-γ, and SCD1. These studies suggest that RC improves insulin resistance and lipid accumulation in NAFLD by activating the AMPK/SIRT1 and SREBP-1c/Fas/ACC pathways, respectively.

LncRNA MIR31HG promotes cell proliferation and invasive properties of the MCF-7 cell line by regulation of receptor-interacting serine-threonine kinase 4.

LncRNA MIR31HG is involved in many types of cancers, while its roles in breast cancer are still unknown. The current study aimed to explore the function of lncRNA MIR31HG in breast cancer and the underlying mechanisms. Stable expression cell lines were constructed by using lentivirus particles. MTT assay was used to determine cell viability. Wound healing and Transwell assay were used to determine cell migration and invasion, respectively. The changes in biomarkers were determined by using qPR-PCT and Western blotting, respectively. BALB/c nude mice were used to generate a xenograft mouse model. MIR31HG regulated cell proliferation, migration and invasion in MCF7 cells. Besides, MIR31HG regulated N-Cadherin, Vimentin, and E-Cadherin. MIR31HG positively regulated receptor-interacting serine-threonine kinase 4 (RIPK4), as supported by the fact that knockdown of MIR31HG suppressed RIPK4, and the knockdown of RIPK4 did not affect MIR31HG. Additionally, we found that RIPK4 regulated cell proliferation, migration and invasion in MCF7 cells. The changes in RIPK4 regulated N-Cadherin, Vimentin, and E-Cadherin. Consistently, in vivo studies showed that the knockdown of MIR31HG or RIPK4 reduced tumor size in xenograft animal models. The roles of lncRNA MIR31HG in breast cancer were associated with its regulatory effects against RIPK4.

[Effects of volume resuscitation on venous pressure gradient in hypovolemic patients undergoing mechanical ventilation].

OBJECTIVE: To investigate the value of venous pressure gradient [D(c-i)VP] between central venous pressure (CVP) and iliac vein pressure (IVP) in assessing the responsiveness to volume resuscitation in hypovolemic patient undergoing mechanical ventilation. METHODS: Thirty hypovolemic patients undergoing mechanical ventilation, with maintenance of similar ventilation conditions, graded volume loading was performed with 250 ml Ringer lactate solution (LR) for each infusion in hypovolemic patients, until mean arterial pressure (MAP) ≥65 mm Hg(1 mm Hg = 0.133 kPa), CVP≥8 mm Hg, strong pulse, perfusion improvement (recovery in the end) were reached. Before infusion, 10 minutes after infusion, and at the end of recovery, the heart rate (HR), MAP, CVP, IVP, stroke volume (SV), thoracic fluid content (TFC) and D(c-i)VP were measured and recorded, the correlations between D(c-i)VP and TFC, SV before and after infusion were analyzed. RESULTS: Before infusion, 10 minutes after infusion, and at the end of recovery, no significant difference was found in HR, MAP, CVP, and IVP,while D(c-i)VP (mm Hg) was obviously lowered (4.89 ± 1.70, 2.80 ± 1.44, 2.10 ± 1.30, respectively), and SV (ml) and TFC (ml) were significantly increased (SV was 42.0 ± 10.5, 49.0 ± 8.3, 58.0 ± 12.1, respectively; TFC was 30.0 ± 9.6, 38.0 ± 8.6, 43.0 ± 11.1, respectively), with statistical differences (P < 0.05 or P < 0.01). Negative correlations were found between D(c-i)VP and TFC, SV [r(1)=-0.580, P(1)=0.004; r(2)=-0.462, P(2) =0.017]. CONCLUSIONS: In the course of fluid resuscitation in hypovolemic patients undergoing mechanical ventilation, the D(c-i)VP was significantly reduced with fluid resuscitation. At the same time, significant correlations between D(c-i)VP, TFC and SV were demonstrated. The measurement of D(c-i)VP could help guide fluid resuscitation in hypovolemic patients undergoing mechanical ventilation.

Dynamic Modeling and Attitude Decoupling Control for a 3-DOF Flexible Piezoelectric Nano-Positioning Stage Based on ADRC.

The paper proposes a three-degrees-of-freedom flexible nano-positioning stage constructed from compliant flexures and piezoelectric thin-sheet actuators, featuring a compact size and fast dynamic responses, which can be extensively applied to the typical micro/nano-positioning applications. Meanwhile, the dynamic model of the flexible PZT nano-positioning with distributed parameter characteristics is established to distinctly reflect the piezoelectric-mechanical coupling relationship between the four flexible PZT actuators and the three outputs of such a system. Furthermore, the attitude decoupling control for the 3-DOF flexible piezoelectric nano-positioning stage is achieved by the Active Disturbance Rejection Control (ADRC) method to compensate for the positioning errors in the actual positioning process. After this, a real-time experimental apparatus with two Position-Sensitive Detectors (PSDs) is also proposed and fabricated to test the three outputs of the flexible piezoelectric thin-sheet (PZT-5A) nano-positioning stage and validate the effectiveness of the dynamic modeling method and attitude decoupling control in the piezoelectric nano-positioning stage ranges.

[Corrigendum] 3­Bromopyruvate sensitizes human breast cancer cells to TRAIL­induced apoptosis via the phosphorylated AMPK­mediated upregulation of DR5.

Following the publication of this article, an interested reader drew to the authors' attention that the western blotting data shown in Fig. 3 on. p. 2439 contained apparent anomalies; first, the protein bands shown to represent the CHOP and p­AMPK experiments in Fig. 3A were strikingly similar. Secondly, the same data bands were inadvertently included in the figure to represent the GRP78 and Bax experiments for the MCF­7 group. The authors have re­examined their original data and realized that this figure was assembled incorrectly (the CHOP and GRP78 data were inadvertently duplicated in the figure). The corrected version of Fig. 3, showing the correct data for the p­AMPK and Bax experiments for the MCF­7 group in Fig. 3A, is shown on the next page. The authors sincerely apologize for the error that was introduced during the preparation of this figure, thank the Editor of Oncology Reports for granting them the opportunity to publish a Corrigendum, and are grateful to the reader for alerting them to this issue. The authors also regret any inconvenience that this mistake may have caused. [the original article was published in Oncology Reports 40: 2435­2444, 2018; DOI: 10.3892/or.2018.6644].

Surface Integrity and Friction Performance of Brass H62 Textured by One-Dimensional Ultrasonic Vibration-Assisted Turning.

The processing method, one-dimensional ultrasonic vibration-assisted turning (1D UVAT), is a potential and efficient way for fabricating a micro-textured surface. This paper aims at exploring the surface integrity and friction performance of brass H62 textured by the 1D UVAT. Four micro-textured surfaces with a specific distribution, size, and shape of dimples were fabricated by optimizing processing parameters, and the corresponding surface topography, subsurface microstructure, and surface roughness were observed and analyzed. A series of friction tests were carried out under oil-lubricating conditions to research the friction performance of micro-textured surfaces. The results show that the reason for the deviation between theoretical and experimental values of dimple depth was further revealed by observing the corresponding subsurface microstructure. The surface roughness of the micro-textured surfaces prepared is related to the number of micro-dimples per unit area and dimple size, which is greater than the surface generated by conventional turning. Compared with the polished surface and micro-grooved surface, the micro-textured surfaces have better friction performance with a lower frictional coefficient (COF) and wear degree. For the micro-textured surface fabricated by 1D UVAT, the number of micro-dimples per unit area has a great effect on the friction performance, and choosing a larger number is more conducive to improving the friction performance under the oil-lubricating condition. Consequently, this study proves that the proposed 1D UVAT can be a feasible candidate for preparing a micro-textured surface with better tribological property.

MiR-98-5p/IGF2 Axis Influence Herceptin Sensitivity through IGF1R/HER2 Heterodimer Formation and AKT/mTOR Signal Pathway in HER2 Positive Breast Cancer.

BACKGROUND AND AIM: IGF1R and HER2 are both members of the growth factor receptor family which is known to play a different role in breast cancer. However, correlation between IGF1R and HER2 has created a controversial situation that need to be fully delineated in development of Herceptin resistance. The aim of this study was to investigate the mechanism of Herceptin resistance through the IGF1R pathway in HER2 positive breast cancer. MATERIALS AND METHODS: Clinical data were obtained from TCGA database and archived documents from The First Affiliated Hospital of Bengbu Medical College. Western blot and immunohistochemistry were used to detect proteins and their phosphorylation. Cell transfection were constructed using shRNA lentivirus vectors. RNAs were analyzed by RT-qPCR. Proteins in serum were analyzed by ELISA assay. Cell proliferation was analyzed by MTS method. Luciferase report experiment was conducted to verify RNA's inter-reaction. RESULTS: Western blot showed IGF2 protein was significantly increased in Herceptin resistant SKBR3-R cells (P<0.01), and IGF1R/HER2 heterodimer level was significantly increased (P<0.01). Luciferase reporter assay verified miR-98-5p could bind to 3 'UTR of IGF2 mRNA. When miR-98-5p was upregulated, the expression level of IGF2 was decreased(P<0.01), the cell invasive ability was reduced(P<0.01), and ultimately, Herceptin resistant cells regained their sensitivity to Herceptin. In clinical research, we found that decreased miR-98-5p level or increased IGF2 level significantly associated with poor treatment response and poor overall survival (OS), poor recurrence free survival (RFS) and poor distant metastasis-free survival (DMFS) in HER2-positive breast cancer. CONCLUSION: MiR-98-5p and IGF2 might potential candidates for predicting Herceptin sensitivity and provides a new way to overcome Herceptin resistance in clinic.