Artemisia arborescens L essential oil loaded beads: preparation and characterization.

The purpose of this work was to prepare sodium alginate beads as a device for the controlled release of essential oil for oral administration as an antiviral agent. Different formulations were prepared with sodium alginate as a natural polymer and calcium chloride or glutaraldehyde as a cross-linking agent. Loading capacities of between 86% and 100% were obtained in freshly prepared beads by changing exposure time to the cross-linking agent. Drying of the calcium alginate beads caused only a slight decrease in the loading efficiency. The surface morphology of the different bead formulations were studied using scanning electron microscopy (SEM). Stability studies over a 3-month period showed that glutaraldehyde reacted with some components of Artemisia arborescens L essential oil, changing its composition. Calcium alginate beads showed an in vitro controlled release of the essential oil for the investigated 24 hours, while the use of glutaraldehyde as a cross-linking agent was found not appropriate because of the interactions with azulene derivatives and the low degree of matrix cross-linkage.

Liposomal incorporation of Artemisia arborescens L. essential oil and in vitro antiviral activity.

The effect of liposomal inclusion on the in vitro antiherpetic activity of Artemisia arborescens L. essential oil was investigated. In order to study the influence of vesicle structure and composition on the antiviral activity of the vesicle-incorporated oil, multilamellar (MLV) and unilamellar (SUV) positively charged liposomes were prepared by the film method and sonication. Liposomes were obtained from hydrogenated (P90H) and non-hydrogenated (P90) soy phosphatidylcholine. Formulations were examined for their stability for over one year, monitoring the oil leakage from vesicles and the average size distribution. The antiviral activity was studied against Herpes simplex virus type 1 (HSV-1) by a quantitative tetrazolium-based colorimetric method. Results showed that Artemisia essential oil can be incorporated in good amounts in the prepared vesicular dispersions. Stability studies pointed out that vesicle dispersions were very stable for at least six months and neither oil leakage nor vesicle size alteration occurred during this period. After one year of storage oil retention was still good, but vesicle fusion was present. Antiviral assays demonstrated that the liposomal incorporation of A. arborescens essential oil enhanced its in vitro antiherpetic activity especially when vesicles were made with P90H. On the contrary, no significant difference in antiviral activity was observed between the free and SUV-incorporated oil.

Diclofenac-beta-cyclodextrin binary systems: physicochemical characterization and in vitro dissolution and diffusion studies.

The aim of this work was to study the influence of beta-cyclodextrin (beta-CD) on the biopharmaceutic properties of diclofenac (DCF). To this purpose the physicochemical characterization of diclofenac-beta-cyclodextrin binary systems was performed both in solution and solid state. Solid phase characterization was performed using differential scanning calorimetry (DSC), powder x-ray diffractometry (XRD), and Fourier transform infrared spectroscopy (FTIR). Phase solubility analyses, and in vitro permeation experiments through a synthetic membrane were performed in solution. Moreover, DCF/beta-CD interactions were studied in DMSO by 1H nuclear magnetic resonance (NMR) spectroscopy. The effects of different preparation methods and drug-to-beta-CD molar ratios were also evaluated. Phase solubility studies revealed 1:1 M complexation of DCF when the freeze-drying method was used for the preparation of the binary system. The true inclusion for the freeze-dried binary system was confirmed by 1H NMR spectroscopy, DSC, powder XRD, and IR studies. The dissolution study revealed that the drug dissolution rate was improved by the presence of CDs and the highest and promptest release was obtained with the freeze-dried binary system. Diffusion experiments through a silicone membrane showed that DCF diffusion was higher from the saturated drug solution (control) than the freeze-dried inclusion complexes, prepared using different DCF-beta-CD molar ratios. However, the presence of the inclusion complex was able to stabilize the system giving rise to a more regular diffusion profile.

Niosomes as carriers for tretinoin. I. Preparation and properties.

Tretinoin-loaded niosomes were prepared from polyoxyethylene (4) lauryl ether, sorbitan esters and a commercial mixture of octyl/decyl polyglucosides, in the presence of cholesterol and dicetyl phosphate. Liposomes made of hydrogenated and non-hydrogenated phosphatidylcholine were also prepared as a comparison reference. A study was made of the influence of vesicle composition and preparation method on the vesicle structure (MLV, LUV, SUV), size distribution, entrapment efficiency and in vitro release of incorporated tretinoin. Results showed that in the presence of cholesterol all the amphiphiles used were able to form stable vesicle dispersions with or without tretinoin. Vesicle sizes were dependent on the preparation method, bilayer composition and drug load. Multilamellar (MLV) vesicles were larger than extruded (LUV) and sonicated (SUV) vesicles while drug-loaded vesicles were generally smaller than empty ones. Entrapment efficiencies of tretinoin were always very high especially for multilamellar (91-99%) and extruded (88-98%) vesicles. The in vitro release of tretinoin from the prepared vesicular formulations was studied using the vertical Franz diffusion cells. The rate of drug release through a Silastic membrane from a liposomal and niosomal tretinoin dispersion was generally faster than from a tretinoin solution. Release data showed that tretinoin delivery is mainly affected by the vesicular structure and that tretinoin delivery increased from MLVs to LUVs to SUVs.

Niosomes as carriers for tretinoin. II. Influence of vesicular incorporation on tretinoin photostability.

In this work, we compared the chemical stability of tretinoin (TRA) in methanol and in vesicular suspensions exposed both to UV and artificial daylight conditions with the aim of evaluating the potential of niosomes as topical carriers capable of improving the stability of photosensitive drugs. Tretinoin-loaded niosomes were prepared from polyoxyethylene (4) lauryl ether (Brij 30), sorbitan esters (Span 40 and Span 60) and a commercial mixture of octyl/decyl polyglucosides (Triton CG110). Liposomes made from hydrogenated (P90H) and non-hydrogenated (P90) soy phosphatidylcholines were also prepared and studied. In order to evaluate the influence of vesicle structure on the photostability of tretinoin, TRA-loaded vesicles were prepared by the film hydration method, extrusion technique and sonication. After UV irradiation, TRA dissolved in methanol degraded very quickly while the incorporation in vesicles always led to a reduction of the photodegradation process. The photoprotection offered by vesicles varied depending on the vesicle structure and composition. After fluorescent light irradiation for 21 days, not all the studied vesicular formulations improved TRA stability when compared with the free drug in methanol. Tretinoin incorporated in P90 or Span vesicles presented a half-life shorter or very close to that of the free drug. However, the inclusion of TRA in P90H liposomes and Brij 30 or Triton CG110 niosomes retarded the drug photodegradation.

Synthesis, characterization and in-vitro antitubercular activity of isoniazid-gelatin conjugate.

OBJECTIVES: A novel and simple method to synthesize antitubercular-protein conjugate by solid phase synthesis was developed employing a carboxypolystyrene resin. The aim was to covalently bind a drug with antitubercular activity, isoniazid, to a biomacromolecule, gelatin, widely used in the pharmaceutical, cosmetic and food industry. METHODS: Calorimetric and (1) H NMR analyses were performed to verify the bond formation between the antitubercular drug and gelatin. After absorption isoniazid delivers toxic metabolites and so an oxidation test with tert-butyl hydroperoxide was performed to assess the amount of toxic metabolites released from the prodrug (gelatin linked to isoniazid), compared with isoniazid itself. KEY FINDINGS: Spectrophotometric analysis revealed that the protein derivative was an excellent isoniazid prodrug since there was a 40% reduction in release of toxic metabolites (isonicotinic acid) by the prodrug. The results clearly showed that antitubercular moieties, covalently linked to a natural polymer, allowed the introduction of peculiar features for specific pharmaceutical applications into the macromolecule. In addition, antitubercular activity of the new polymer was determined by Middlebrook 7H11 medium against Mycobacterium tuberculosis complex. CONCLUSIONS: The new isoniazid-gelatin conjugate showed significant antitubercular activity and for this reason should be useful as an efficacious tool in the treatment of tuberculosis.

Liposomes coated with chitosan-xanthan gum (chitosomes) as potential carriers for pulmonary delivery of rifampicin.

The aim of this work was to develop new microparticles for drug delivery to lungs by coating liposomes with chitosan (CH)-xanthan gum (XG) polyelectrolyte complexes to obtain chitosomes. To this purpose, two groups of liposomes were prepared using a mixture of soy phosphatidylcholine and hydrogenated soy phosphatidylcholine in two different concentrations to evaluate their capability to entrap appropriate amounts of the model drug rifampicin. The obtained vesicles were then coated with different CH-XG weight ratios and liposomes and chitosomes were characterized in terms of morphology, size, size distribution, zeta potential, drug entrapment, and rheological properties. The efficiency of chitosomes and liposomes during nebulization was also studied. Results of this study indicated that nebulization and rheological properties of chitosomes are affected by the CH-XG weight ratio. In particular, CH-XG 1:0.5 (w/w) coating was able to greatly improve drug total mass output and drug deposition in the lower stages of the impinger.

Metronidazole prodrugs: synthesis, physicochemical properties, stability, and ex vivo release studies.

The aim of the present study was to develop a colon targeted delivery system for metronidazole using polymeric prodrug formulation. Two chitosan amide conjugates of metronidazole were prepared by using two different spacers to covalently link the drug to the amino group of the chitosan glucosamine units. Glutaric and succinic hemiesters of metronidazole were thus prepared and then coupled to chitosan to obtain metronidazole-glutaryl- and metronidazole-succinyl-chitosan conjugates. Polymeric prodrugs were characterized by solid state NMR method, namely carbon 13 cross polarization magic angle spinning ((13)C NMR CPMAS). Prodrug stability study was carried out in acid (pH = 1.2) and in alkaline (pH = 7.4) buffers in a thermostatic bath at 37 °C. Drug release from the two prodrugs was studied by incubating each of them with 10% w/v cecal and colonic content of rats. Obtained results showed that both prodrugs were adequately stable in acid environment, while the succinyl conjugate was more stable than the glutaryl one in alkaline buffer. Both the prodrugs released the drug in cecal and colonic content, showing that the two systems could serve as colon specific delivery systems of metronidazole.

Release of rifampicin from chitosan, PLGA and chitosan-coated PLGA microparticles.

Recently three groups of rifampicin (RIF)-loaded microparticles (MPs), consisting of chitosan (CHT), PLGA and PLGA/CHT mixtures, were assessed in terms of RIF-loading and retention during nebulisation. The CHT-coated PLGA MPs were found to exhibit high RIF-loading ability together with nebulisation ability, stability, and mucoadhesive properties. All MP types had comparable toxicity towards alveolar cells which was significantly lower than that of the free drug. Herein, we study the release of RIF from all MP-types, during incubation in buffer with pH values: 4.40 and 7.40. Results show that CHT particles exhibit a higher burst release compared to PLGA MPs; at pH 4.40, which is explained by the higher solubility of CHT in acidic media. At pH 7.40 burst release from CHT MP's is significantly lower when CHT is crosslinked with glutaraldehyde, which is consistent with their - previously observed - increased stability during nebulization. From PLGA MPs, RIF release was pH independent under the conditions applied, while the amount of PVA (stabilizer) considerably affected drug release. When PLGA MP's were coated with CHT, at pH 7.40 the retention of RIF increased further (compared to non-coated MPs), while at pH 4.40 the release was faster from the CHT-coated particles. Concluding, it is proven that when PLGA MPs are coated with CHT, in addition to increased particle mucoadhesive properties, the release kinetics of RIF are modified.