Anchored VN Quantum Dots Boosting High Capacity and Cycle Durability of Na3V2(PO4)3@NC Cathode for Aqueous Zinc-Ion Battery and Organic Sodium-Ion Battery.

Na3V2(PO4)3 is a promising high-voltage cathode for aqueous zinc-ion batteries (ZIBs) and organic sodium-ion batteries (SIBs). However, the poor rate capability, specific capacity, and cycling stability severely hamper it from further development. In this work, Na3V2(PO4)3 (NVP) with vanadium nitride (VN) quantum dots encapsulated by nitrogen-doped carbon (NC) nanoflowers (NVP/VN@NC) are manufactured as cathode using in situ nitridation, carbon coating, and structural adjustment. The outer NC layer increases the higher electronic conductivity of NVP. Furthermore, VN quantum dots with high theoretical capacity not only improve the specific capacity of pristine NVP, but also serve as abundant "pins" between NVP and NC to strengthen the stability of NVP/VN@NC heterostructure. For Zn-ion storage, these essential characteristics allow NVP/VN@NC to attain a high reversible capacity of 135.4 mAh g-1 at 0.1 A g-1, and a capacity retention of 91% after 2000 cycles at 5 A g-1. Meanwhile, NVP/VN@NC also demonstrates to be a stable cathode material for SIBs, which can reach a high reversible capacity of 124.5 mAh g-1 at 0.1 A g-1, and maintain 92% of initial capacity after 11000 cycles at 5 A g-1. This work presents a feasible path to create innovative high-voltage cathodes with excellent reaction kinetics and structural stability.

Regulating the Interfacial Charge Density by Constructing a Novel Zn Anode-Electrolyte Interface for Highly Reversible Zn Anode.

Aqueous zinc-ion batteries (AZIBs) have attracted considerable attention. However, due to the uneven distribution of charge density at Zn anode-electrolyte interface, severe dendrites and corrosion are generated during cycling. In this work, a facile and scalable strategy to address the above-mentioned issues has been proposed through regulating the charge density at Zn anode-electrolyte interface. As a proof of concept, amidinothiourea (ATU) with abundant lone-pair electrons is employed as an interfacial charge modifier for Zn anode-electrolyte interface. The uniform and increased interfacial charge distribution on Zn anode-electrolyte interface has been obtained. Moreover, the unique Zn-bond constructed between N atoms and Zn2+ as well as the hydrogen bonds are formed among ATU and Ac- anion/active H2 O, which promote the migration and desolvation behavior of Zn2+ at anode-electrolyte interface. Accordingly, at a trace concentration of 0.01 mg mL-1 ATU, these features endow Zn anode with a long cycling life (more than 800 h), and a high average Columbic efficiency (99.52 %) for Zn||Cu batteries. When pairing with I2 cathode, the improved cycling ability (5000 cycles) with capacity retention of 77.9 % is achieved. The fundamental understanding on the regulation of charge density at anode-electrolyte interface can facilitate the development of AZIBs.

Visible-Light Photocatalytic Degradation Efficiency of Tetracycline and Rhodamine B Using a Double Z-Scheme Heterojunction Catalyst of UiO-66-NH2/BiOCl/Bi2S3.

BiOCl is a promising photocatalyst, but due to its weak visible light absorption capacity and low photogenerated electron-hole pair separation rate, its practical application is limited to a certain extent. In this study, a novel double Z-scheme heterojunction UiO-66-NH2/BiOCl/Bi2S3 catalyst was constructed to broaden the visible light response range and promote high photogenerated hole-electron separation of BiOCl. Its photocatalytic performance is evaluated by dissociating tetracycline (TC) and rhodamine B (RhB) in visible light. The optimal proportion of UiO-66-NH2/BiOCl/Bi2S3 hybrids exhibits the best degradation efficiency of visible light illumination (∼93% in 120 min for TC and ∼98% in 60 min for RhB). The synergistic effect of a large visible light response range and the Z-scheme charge transfer mechanism ensure the excellent visible photocatalytic activity of UiO-66-NH2/BiOCl/Bi2S3. It is proven that h+ and •O2- are the main active substances in the photocatalysis process by active substance capture experiments and electron spin resonance tests. The intermediates and degradation processes are analyzed by high-performance liquid chromatography-mass spectrometry. This study proves that the new UiO-66-NH2/BiOCl/Bi2S3 photocatalyst has great application potential in the field of water pollution degradation and will provide a new idea for the optimization of BiOCl.

Origin of Superionic Li3Y1-xInxCl6 Halide Solid Electrolytes with High Humidity Tolerance.

The high ionic conductivity, air/humidity tolerance, and related chemistry of Li3MX6 solid-state electrolytes (SSEs, M is a metal element, and X is a halogen) has recently gained significant interest. However, most of the halide SSEs suffer from irreversible chemical degradation when exposed to a humid atmosphere, which originates from hydrolysis. Herein, the function of the M atom in Li3MX6 was clarified by a series of Li3Y1-xInxCl6 (0 ≤ x < 1). When the ratio of In3+ was increased, a gradual structural conversion from the hexagonal-closed-packed (hcp) anion arrangement to cubic-closed-packed (ccp) anion arrangement has been traced. Compared to hcp anion sublattice, the Li3MX6 with ccp anion sublattice reveals faster Li+ migration. The tolerance of Li3Y1-xInxCl6 towards humidity is highly improved when the In3+ content is high enough due to the formation of hydrated intermediates. The correlations among composition, structure, Li+ migration, and humidity stability presented in this work provide insights for designing new halide-based SSEs.

Transition of the Reaction from Three-Phase to Two-Phase by Using a Hybrid Conductor for High-Energy-Density High-Rate Solid-State Li-O2 Batteries.

Solid-state Li-O2 batteries possess the ability to deliver high energy density with enhanced safety. However, designing a highly functional solid-state air electrode is the main bottleneck for its further development. Herein, we adopt a hybrid electronic and ionic conductor to build solid-state air electrode that makes the transition of Li-O2 battery electrochemical mechanism from a three-phase process to a two-phase process. The solid-state Li-O2 battery with this hybrid conductor solid-state air electrode shows decreased interfacial resistance and enhanced reaction kinetics. The Coulombic efficiency of Li-O2 battery is also significantly improved, benefiting from the good contact between discharge products and electrode materials. In situ environmental transmission electron microscopy under oxygen was used to illustrate the reversible deposition and decomposition of discharge products on the surface of this hybrid conductor, visually verifying the two-phase reaction.

Site-Occupation-Tuned Superionic LixScCl3+xHalide Solid Electrolytes for All-Solid-State Batteries.

The enabling of high energy density of all-solid-state lithium batteries (ASSLBs) requires the development of highly Li+-conductive solid-state electrolytes (SSEs) with good chemical and electrochemical stability. Recently, halide SSEs based on different material design principles have opened new opportunities for ASSLBs. Here, we discovered a series of LixScCl3+x SSEs (x = 2.5, 3, 3.5, and 4) based on the cubic close-packed anion sublattice with room-temperature ionic conductivities up to 3 × 10-3 S cm-1. Owing to the low eutectic temperature between LiCl and ScCl3, LixScCl3+x SSEs can be synthesized by a simple co-melting strategy. Preferred orientation is observed for all the samples. The influence of the value of x in LixScCl3+x on the structure and Li+ diffusivity were systematically explored. With increasing x value, higher Li+, lower vacancy concentration, and less blocking effects from Sc ions are achieved, enabling the ability to tune the Li+ migration. The electrochemical performance shows that Li3ScCl6 possesses a wide electrochemical window of 0.9-4.3 V vs Li+/Li, stable electrochemical plating/stripping of Li for over 2500 h, as well as good compatibility with LiCoO2. LiCoO2/Li3ScCl6/In ASSLB exhibits a reversible capacity of 104.5 mAh g-1 with good cycle life retention for 160 cycles. The observed changes in the ionic conductivity and tuning of the site occupations provide an additional approach toward the design of better SSEs.

Water-Mediated Synthesis of a Superionic Halide Solid Electrolyte.

To promote the development of solid-state batteries, polymer-, oxide-, and sulfide-based solid-state electrolytes (SSEs) have been extensively investigated. However, the disadvantages of these SSEs, such as high-temperature sintering of oxides, air instability of sulfides, and narrow electrochemical windows of polymers electrolytes, significantly hinder their practical application. Therefore, developing SSEs that have a high ionic conductivity (>10-3  S cm-1 ), good air stability, wide electrochemical window, excellent electrode interface stability, low-cost mass production is required. Herein we report a halide Li+ superionic conductor, Li3 InCl6 , that can be synthesized in water. Most importantly, the as-synthesized Li3 InCl6 shows a high ionic conductivity of 2.04×10-3  S cm-1 at 25 °C. Furthermore, the ionic conductivity can be recovered after dissolution in water. Combined with a LiNi0.8 Co0.1 Mn0.1 O2 cathode, the solid-state Li battery shows good cycling stability.

Recent Advances in Layered Ti3 C2 Tx MXene for Electrochemical Energy Storage.

Ti3 C2 Tx , a typical representative among the emerging family of 2D layered transition metal carbides and/or nitrides referred to as MXenes, has exhibited multiple advantages including metallic conductivity, a plastic layer structure, small band gaps, and the hydrophilic nature of its functionalized surface. As a result, this 2D material is intensively investigated for application in the energy storage field. The composition, morphology and texture, surface chemistry, and structural configuration of Ti3 C2 Tx directly influence its electrochemical performance, e.g., the use of a well-designed 2D Ti3 C2 Tx as a rechargeable battery anode has significantly enhanced battery performance by providing more chemically active interfaces, shortened ion-diffusion lengths, and improved in-plane carrier/charge-transport kinetics. Some recent progresses of Ti3 C2 Tx MXene are achieved in energy storage. This Review summarizes recent advances in the synthesis and electrochemical energy storage applications of Ti3 C2 Tx MXene including supercapacitors, lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries. The current opportunities and future challenges of Ti3 C2 Tx MXene are addressed for energy-storage devices. This Review seeks to provide a rational and in-depth understanding of the relation between the electrochemical performance and the nanostructural/chemical composition of Ti3 C2 Tx , which will promote the further development of 2D MXenes in energy-storage applications.

Formation of Si nanowires by the electrochemical reduction of SiO2 with Ni or NiO additives.

Various morphologies of silicon nanowires (SiNWs) were successfully prepared by the electrochemical reduction of silica mixed with different additives (Au, Ag, Fe, Co, Ni, and NiO, respectively). Straight SiNWs were extensively obtained by the electro-reduction of porous Ni/SiO2 blocks in molten CaCl2 at 900 °C. The SiNWs had a wide diameter distribution of 80 to 350 nm, and the Ni-Si droplets were found on the tips of the nanowires. The growth mechanism of SiNWs was investigated, which could reveal that the nano-sized Ni-Si droplets formed at the Ni/SiO2/CaCl2 three-phase interlines. Based on the mechanism proposed, NiO particles with sub-micrometer size were selected as the additive, and straight SiNWs with diameters of 60 to 150 nm were also prepared via the electrochemical process.

Engineering of charge density at the anode/electrolyte interface for long-life Zn anode in aqueous zinc ion battery.

The aqueous zinc ion battery emerges as the promising candidate applied in large-scale energy storage system. However, Zn anode suffers from the issues including Zn dendrite, Hydrogen evolution reaction and corrosion. These challenges are primarily derived from the instability of anode/electrolyte interface, which is associated with the interfacial charge density distribution. In this context, the recent advancements concentrating on the strategies and mechanism to regulate charge density at the Zn anode/electrolyte interface are summarized. Different characterization techniques for charge density distribution have been analysed, which can be applied to assess the interfacial zinc ion transport. Additionally, the charge density regulations at the Zn anode/electrolyte interface are discussed, elucidating their roles in modulating electrostatic interactions, electric field, structure of solvated zinc ion and electric double layer, respectively. Finally, the perspectives and challenges on the further research are provided to establish the stable anode/electrolyte interface by focusing on charge density modifications, which is expected to facilitate the development of aqueous zinc ion battery.

Flexible free-standing Fe-CoP-NAs/CC nanoarrays for high-performance full lithium-ion batteries.

In this study, a flexible, free-standing Fe-doped CoP nanoarrays electrode for superior lithium-ion storage has been successfully fabricated. The electrode combines the advantages of a Fe-doping and a flexible carbon cloth (CC) support, resulting in a high specific capacity (1356 mAh/g at 0.2 A/g) and excellent cycling stability (1138 mAh/g after 100 cycles). The cyclic voltammetry (CV) curves at different scan rates investigate the outstanding lithium storage behavior of Fe-CoP-NAs/CC which indicates a combined influence of diffusion behavior and capacitance behavior on the electrochemical process. The galvanostatic intermittent titration technique (GITT) analyzes the diffusion kinetics of Li+ which indicates the fast diffusion kinetics in the Fe-CoP/NAs/CC anode. The assembled Fe-CoP-NAs/CC//LiFePO4 battery exhibits a remarkable capacity of 325.2 mAh/g even at 5 A/g. And the battery also has good cycle stability, and still provides 498.1 mAh/g specific capacity after 200 cycles. Moreover, the Fe-CoP-NAs/CC//LiFePO4 soft-pack battery can continuously power the LEDs when it is bent at various angles which demonstrates its potential for use in wearable devices.

Fundamental Understanding of Hydrogen Evolution Reaction on Zinc Anode Surface: A First-Principles Study.

Hydrogen evolution reaction (HER) has become a key factor affecting the cycling stability of aqueous Zn-ion batteries, while the corresponding fundamental issues involving HER are still unclear. Herein, the reaction mechanisms of HER on various crystalline surfaces have been investigated by first-principle calculations based on density functional theory. It is found that the Volmer step is the rate-limiting step of HER on the Zn (002) and (100) surfaces, while, the reaction rates of HER on the Zn (101), (102) and (103) surfaces are determined by the Tafel step. Moreover, the correlation between HER activity and the generalized coordination number ([Formula: see text]) of Zn at the surfaces has been revealed. The relatively weaker HER activity on Zn (002) surface can be attributed to the higher [Formula: see text] of surface Zn atom. The atomically uneven Zn (002) surface shows significantly higher HER activity than the flat Zn (002) surface as the [Formula: see text] of the surface Zn atom is lowered. The [Formula: see text] of surface Zn atom is proposed as a key descriptor of HER activity. Tuning the [Formula: see text] of surface Zn atom would be a vital strategy to inhibit HER on the Zn anode surface based on the presented theoretical studies. Furthermore, this work provides a theoretical basis for the in-depth understanding of HER on the Zn surface.

Recyclable fabrication of hollow N-doped amorphous carbon nanospindles with abundant short-range curved carbon fragments as bifunctional anode for lithium/sodium ion storage.

A recyclable hard-template method is proposed to exploit spindle-shaped hollow nitrogen-doped amorphous carbon (h-NAC) with a large number of short-range curved carbon fragments as anodes for lithium/sodium ion batteries (LIBs/SIBs). Besides providing adsorption sites due to the high existence of oxygen-containing functional groups (CO and COOH), the heavily exposed edge regions also provide a favorable storage environment with high adsorption energy for Li+/Na+ due to their short-range curved structure. Importantly, the etching solution of hard templates can be recycled to generate the FeOOH nanospindles as a precursor through a simple chemical titration, which supplies a new idea for the green preparation of hollow materials. The h-NAC electrode is proven to be bifunctional for storing lithium and sodium ions, displaying favorable rate capability (255 mAh g-1 and 106 mAh g-1 at 5 A g-1 for LIBs and SIBs, respectively). After 1000 cycles at 1 A g-1, the reproducible capacities of the LIBs and SIBs kept 496 mAh g-1 and 181 mAh g-1, respectively.

Chemically bonding inorganic fillers with polymer to achieve ultra-stable solid-state sodium batteries.

Inorganic/organic composite solid electrolytes (CSEs) have attracted ever-increasing attentions due to their outstanding mechanical stability and processibility. However, the inferior inorganic/organic interface compatibility limits their ionic conductivity and electrochemical stability, which hinders their application in solid-state batteries. Herein, we report a homogeneously distributed inorganic fillers in polymer by in-situ anchoring SiO2 particles in polyethylene oxide (PEO) matrix (I-PEO-SiO2). Compared with ex-situ CSEs (E-PEO-SiO2), SiO2 particles and PEO chains in I-PEO-SiO2 CSEs are closely welded by strong chemical bonds, thus addressing the issue of interfacial compatibility and realizing excellent dendrite-suppression ability. In addition, the Lewis acid-base interactions between SiO2 and salts facilitate the dissociation of sodium salts and increase the concentration of free Na+. Consequently, the I-PEO-SiO2 electrolyte demonstrates an improved Na+ conductivity (2.3 × 10-4 S cm-1 at 60 °C) and Na+ transference number (0.46). The as constructed Na3V2(PO4)3 ‖ I-PEO-SiO2 ‖ Na full-cell demonstrates a high specific capacity of 90.5 mAh g-1 at 3C and an ultra-long cycling stability (>4000 cycles at 1C), outperforming the state-of-the-art literatures. This work provides an effective way to solve the issue of interfacial compatibility, which can enlighten other CSEs to overcome their interior compatibility.

Isocyanate Additives Improve the Low-Temperature Performance of LiNi0.8Mn0.1Co0.1O2||SiOx@Graphite Lithium-Ion Batteries.

LiNi0.8Mn0.1Co0.1O2||SiOx@graphite (NCM811||SiOx@G)-based lithium-ion batteries (LIBs) exhibit high energy density and have found wide applications in various fields, including electric vehicles. Nonetheless, its low-temperature performance remains a challenge. One of the most efficacious strategies to enhance the low-temperature functionality of battery is the development of appropriate electrolytes with low-temperature suitability. Herein, p-tolyl isocyanate (PTI) and 4-fluorophenyl isocyanate (4-FI) are used as additive substances to integrate into the electrolytes to improve the low-temperature performance of the battery. Theoretical calculations and experimental results indicate that PTI and 4-FI can both preferentially generate a stable SEI on the electrode surface, which is beneficial to reduce the interfacial impedance. As a result, the additive, i.e. 4-FI, is superior to PTI in improving the low-temperature performance of the battery due to the optimization of F in the SEI membrane components. At room temperature, the cyclic stability of the NCM811/SiOx@G pouch cell increases from 92.5% (without additive) to 94.2% (with 1% 4-FI) after 200 cycles at 0.5 C. Under the operating temperature of -20 °C, the cyclic stability of the NCM811/SiOx@G pouch cell increases from 83.2% (without additive) to 88.6% (with 1% 4-FI) after 100 cycles at 0.33 C. Therefore, a rational interphase design involving the modification of the additive structure is a cost-effective way to improve the performance of LIBs.

Revealing the Local Cathodic Interfacial Chemism Inconsistency in a Practical Large-Sized Li-O2 Model Battery with High Energy Density to Underpin Its Key Cyclic Constraints.

Due to the theoretical ultrahigh energy density of the Li-O2 battery chemistry, it has been hailed as the ultimate battery technology. Yet, practical Li-O2 batteries usually need to be designed in a large-sized pattern to actualize a high specific energy density, and such batteries often cannot be cycled effectively. To understand the inherent reasons, we specially prepared large-sized (13 cm × 13 cm) Li-O2 model batteries with practical energy output (6.9 Ah and 667.4 Wh/kgcell) for investigations. By subregional and postmortem analysis, the cathode interface was found to have severe local inhomogeneity after discharge, which was highly associated with the electrolyte and O2 maldistribution. The quantitative results by X-ray photoelectron spectroscopy (XPS) evidenced that this local inhomogeneity can exacerbate the generation of lithium acetate during charge, where the locally higher ratio of unutilized carbon surface and less Li2O2 after discharge would result in increased lithium acetate formation for a subsequent local overcharge. Moreover, verification experiments proved that the byproduct lithium acetate, which had been of less concern, was recalcitrant and triggered much larger polarization compared with the commonly reported byproduct Li2CO3 during battery operations, further revealing the key limiting factors leading to the poor rechargeability of batteries by its accumulation at a pouch-type cell level.

An Air-Stable and Li-Metal-Compatible Glass-Ceramic Electrolyte enabling High-Performance All-Solid-State Li Metal Batteries.

The development of all-solid-state Li metal batteries (ASSLMBs) has attracted significant attention due to their potential to maximize energy density and improved safety compared to the conventional liquid-electrolyte-based Li-ion batteries. However, it is very challenging to fabricate an ideal solid-state electrolyte (SSE) that simultaneously possesses high ionic conductivity, excellent air-stability, and good Li metal compatibility. Herein, a new glass-ceramic Li3.2 P0.8 Sn0.2 S4 (gc-Li3.2 P0.8 Sn0.2 S4 ) SSE is synthesized to satisfy the aforementioned requirements, enabling high-performance ASSLMBs at room temperature (RT). Compared with the conventional Li3 PS4 glass-ceramics, the present gc-Li3.2 P0.8 Sn0.2 S4 SSE with 12% amorphous content has an enlarged unit cell and a high Li+ ion concentration, which leads to 6.2-times higher ionic conductivity (1.21 × 10-3 S cm-1 at RT) after a simple cold sintering process. The (P/Sn)S4 tetrahedron inside the gc-Li3.2 P0.8 Sn0.2 S4 SSE is verified to show a strong resistance toward reaction with H2 O in 5%-humidity air, demonstrating excellent air-stability. Moreover, the gc-Li3.2 P0.8 Sn0.2 S4 SSE triggers the formation of Li-Sn alloys at the Li/SSE interface, serving as an essential component to stabilize the interface and deliver good electrochemical performance in both symmetric and full cells. The discovery of this gc-Li3.2 P0.8 Sn0.2 S4 superionic conductor enriches the choice of advanced SSEs and accelerates the commercialization of ASSLMBs.

Principle understanding towards synthesizing Fe/N decorated carbon catalysts with pyridinic-N enriched and agglomeration-free features for lithium-oxygen batteries.

Metal-N-decorated carbon catalysts are cheap and effective alternatives for replacing the high-priced Pt-based ones in activating the reduction of oxygen for metal-air or fuel cells. The preparation of such heterogeneous catalysts often requires complex synthesis processes, including harsh acid treatment, secondary pyrolysis processes, etching, etc., to make the heteroatoms evenly dispersed in the carbon substrates to obtain enhanced activities. Through combined experimental characterizations, we found that by precise control of the precursors added, a Fe/N uniformly distributed, agglomeration-free Fe/N decorated Super-P carbon material (FNDSP) can be easily obtained by a one-pot synthesis process with distinctly higher pyridinic-N content and elevated catalytic activity. An insight into this phenomenon was carefully demonstrated and also verified in Li-O2 batteries, which delivered a high discharging platform of 2.85 V and can be fully discharged with a capacity of 5811.5 mA h gcarbon+catalyst -1 at the cut-off voltage of 2.5 V by the low-cost Super-P modified catalyst.

The effect of solid content on the rheological properties and microstructures of a Li-ion battery cathode slurry.

The development of new materials and the understanding of the microstructure formation of electrodes have become increasingly important for improving Li-ion battery performance. In this study, we investigate the effect of solid content on the rheological properties of and the microstructures in the cathode slurry prepared from Ni-rich materials. With long-chain structures, PVDF molecules can change their configurations when they come into contact with the solid particles in slurries, and their bridging function can change with the solid content in the slurry. Below the optimum content, particle sedimentation easily takes place. Above the optimum content, excessive yield stress is created in the slurry, and this stress is not conducive to homogeneous distribution of the components. The rheological properties of the slurries vary greatly under different solid contents. We investigated the uniformity and stability of the slurry prepared from Ni-rich materials and found that the most suitable solid content of the slurry lies in the range from 63.9% to 66.3%. Our work might assist in the production of high-performance Li-ion batteries that are made using an electrode slurry.

Remaining Li-Content Dependent Structural Evolution during High Temperature Re-Heat Treatment of Quantitatively Delithiated Li-Rich Cathode Materials with Surface Defect-Spinel Phase.

Pre-extracting Li+ from Li-rich layered oxides by chemical method is considered to be a targeted strategy for improving this class of cathode material. Understanding the structural evolution of the delithiated material is very important because this is directly related to the preparation of electrochemical performance enhanced Li-rich material. Herein, we perform a high temperature reheat treatment on the quantitatively delithiated Li-rich materials with different amounts of surface defect-spinel phase and carefully investigate the structural evolution of these delithiated materials. It is found that the high temperature reheat treatment could cause the decomposition of the unstable surface defect-spinel structure, followed by the rearrangement of transition metal ions to form the thermodynamically stable phases, More importantly, we find that this process has high correlation with the remaining Li-content in the delithiated material. When the amount of extracted Li+ is relatively small (corresponding to the higher remaining Li-content), the surface defect-spinel phase could be dominantly decomposed into the LiMO2 (M = Ni, Co, and Mn) layered phase along with the significant improvement of electrochemical performance, and continuing to decrease remaining Li-content could lead to the emergence of M3O4-type spinel impurity embedding in the final product. However, when the extracted Li+ further achieves a certain amount, after the high temperature heat-treatment the Mn-rich Li2MnO3 phase (C2/m) could be separated from Ni-rich phases (including R3m, Fd3m, and Fm3m), thus resulting in a sharp deterioration of initial capacity and voltage. These findings suggest that reheating the delithiated Li-rich material to high temperature may be a simple and effective way to improve the predelithiation modification method, but first the amount of extracted Li+ should be carefully optimized during the delithiation process.