RESUMO
Single-atom catalysts (SACs) with maximized metal atom utilization and intriguing properties are of utmost importance for energy conversion and catalysis science. However, the lack of a straightforward and scalable synthesis strategy of SACs on diverse support materials remains the bottleneck for their large-scale industrial applications. Herein, we report a general approach to directly transform bulk metals into single atoms through the precise control of the electrodissolution-electrodeposition kinetics in ionic liquids and demonstrate the successful applicability of up to twenty different monometallic SACs and one multimetallic SAC with five distinct elements. As a case study, the atomically dispersed Pt was electrodeposited onto Ni3N/Ni-Co-graphene oxide heterostructures in varied scales (up to 5 cm × 5 cm) as bifunctional catalysts with the electronic metal-support interaction, which exhibits low overpotentials at 10 mA cm-2 for hydrogen evolution reaction (HER, 30 mV) and oxygen evolution reaction (OER, 263 mV) with a relatively low Pt loading (0.98 wt%). This work provides a simple and practical route for large-scale synthesis of various SACs with favorable catalytic properties on diversified supports using alternative ionic liquids and inspires the methodology on precise synthesis of multimetallic single-atom materials with tunable compositions.
RESUMO
Layered double hydroxides (LDHs), promising bifunctional electrocatalysts for overall water splitting, are hindered by their poor conductivity and sluggish electrochemical reaction kinetics. Herein, a hierarchical Cu-doped NiCo LDH/NiCo alloy heterostructure with rich oxygen vacancies by electronic modulation is tactfully designed. It extraordinarily effectively drives both the oxygen evolution reaction (151 mV@10 mA cm-2) and the hydrogen evolution reaction (73 mV@10 mA cm-2) in an alkaline medium. As bifunctional electrodes for overall water splitting, a low cell voltage of 1.51 V at 10 mA cm-2 and remarkable long-term stability for 100 h are achieved. The experimental and theoretical results reveal that Cu doping and NiCo alloy recombination can improve the conductivity and reaction kinetics of NiCo LDH with surface charge redistribution and reduced Gibbs free energy barriers. This work provides a new inspiration for further design and construction of nonprecious metal-based bifunctional electrocatalysts based on electronic structure modulation strategies.
RESUMO
Due to the limitation of inherent ultra-high electron concentration, the electrical properties of In2O3 resemble those of conductors rather than semiconductors prior to special treatment. In this study, the effect of various annealing treatments on the microstructure, optical properties, and oxygen vacancies of the films and transistors is systematically investigated. Our finding reveals a progressive crystallization trend in the films with increasing annealing temperature. In addition, a higher annealing temperature is also associated with the reduction in the concentration of oxygen vacancies, as well as an elevation in both optical transmittance and optical bandgap. Furthermore, with the implementation of annealing process, the devices gradually transform from no pronounced gate control to exhibit with excellent gate control and electrical performances. The atomic layer deposited Hf-doped In2O3 thin film transistor annealed at 250 °C exhibits optimal electrical properties, with a field-effect mobility of 18.65 cm2 V-1 s-1, a subthreshold swing of 0.18 V/dec, and an Ion/Ioff ratio of 2.76 × 106. The results indicate that the impact of varying annealing temperatures can be attributed to the modulation of oxygen vacancies within the films. This work serves as a complementary study for the existing post-treatment of oxide films and provides a reliable reference for utilization of the annealing process in practical applications.
RESUMO
The surface and interface chemistry are critical for controlling the properties of two-dimensional transition metal carbides and nitrides (MXenes). Numerous efforts have been devoted to the functionalization of MXenes with small inorganic ligands; however, few etching methods have been reported on the direct bonding of organic groups to MXene surfaces. In this work, we demonstrated an efficient and rapid strategy for the direct synthesis of 2D Ti3C2Tx MXene nanosheets with organic terminal groups in an organic Lewis acid (trifluoromethanesulfonic acid) solvent, without introducing additional intercalations. The dissolution of aluminum and the subsequent in situ introduction of trifluoromethanesulfonic acid resulted in the extraction of Ti3C2Tx MXene (T=CF3SO3 -) (denoted as CF3SO3H-Ti3C2Tx) flakes with sizes reaching 15â µm and high productivity (over 70 %) of monolayers or few layers. More importantly, the large CF3SO3H-Ti3C2Tx MXene nanosheets had high colloidal stability, making them promising as efficient electrocatalysts for the hydrogen evolution reaction.
RESUMO
Two-dimensional Ti3C2Tx MXene materials, with metal-like conductivities and versatile terminals, have been considered to be promising surface modification materials for Zn-metal-based aqueous batteries (ZABs). However, the oxygen-rich and hybridized terminations caused by conventional methods limit their advantages in inhibiting zinc dendrite growth and reducing corrosion-related side reactions. Herein, -O-depleted, -Cl-terminated Ti3C2Tx was precisely fabricated by the molten salt electrochemical etching of Ti3AlC2, and controlled in situ terminal replacement from -Cl to unitary -S or -Se was achieved. The as-prepared -O-depleted and unitary-terminal Ti3C2Tx as Zn anode coatings provided excellent hydrophobicity and enriched zinc-ionophilic sites, facilitating Zn2+ horizontal transport for homogeneous deposition and effectively suppressing water-induced side reactions. The as-assembled Ti3C2Sx@Zn symmetric cell achieved a cycle life of up to 4200â h at a current density and areal capacity of 2â mA cm-2 and 1â mAh cm-2, respectively, with an impressive cumulative capacity of up to 7.25â Ah cm-2 at 5â mA cm-2//2â mAh cm-2. These findings provide an effective electrochemical strategy for tailoring -O-depleted and unitary Ti3C2Tx surface terminals and advancing the understanding of the role of specific Ti3C2Tx surface chemistry in regulating the plating/stripping behaviors of metal ions.
RESUMO
Ni-rich layered oxide cathode materials demonstrate high energy densities for Li-ion batteries, but the electrochemically driven thermal runaway and mechanical degradation remain their long-standing challenges in practical applications. Herein, it presents a novel ZrV2 O7 (ZVO) coating with negative thermal expansion properties along the secondary particles and primary particle grain boundaries (GBs), to simultaneously enhance the structural and thermal stability of LiNi0.8 Co0.1 Mn0.1 O2 (NCM811). It unveils that, such an architecture can significantly enhance the electronic conductivity, suppress the microcracks of GBs, alleviate the layered to spinel/rock-salt phase transformation, and meanwhile relieve the lattice oxygen loss by increasing the oxygen vacancy formation energy increased (1.43 vs 1.90 eV). Consequently, the ZVO-coated NCM811 material demonstrates a remarkable cyclability with 86.5% capacity retention after 100 cycles, and an outstanding rate performance of 30 C under a high-voltage of 4.6 V, outperforming the state-of-the-art literature. More importantly, the Li+ transportation can be readily blocked at 120 °C by the negative-thermal-expansion ZVO coating, thus avoiding the high-temperature thermal runaway.
RESUMO
We systematically study the thermal and topological properties of X2Y3 (X = As, Sb, Bi; Y = Se, Te) and the effects of pressure and temperature on their electronic properties using first-principles. We find that the external pressure-induced electronic topological transition occurs at about 5 GPa for Bi2Se3, and the type of band gap tends to become indirect with the increase of pressure. We also investigate the lattice expansion with temperature in quasi-harmonic approximation and further explore the effect of temperature on the volume, band gap, and volumetric thermal expansion coefficient of the studied selenides and tellurides. Finally, we calculate the evolution of the Wannier charge center of X2Y3 to determine their topological invariants, and theoretically suggest that Bi2Se3 changes from a topological to an ordinary insulator when the pressure decreases to -8 GPa; As2Se3 is found to be an ordinary insulator, while all other four compounds are always strong topological insulators at any pressure or temperature.
RESUMO
Alkali and alkali earth oxides show good CO2 capture performance for carbonation, while their regeneration occurs at high temperatures, leading to a high energy penalty. When alkali oxides and alkali earth oxides combine with SiO2 to form oxysalts, the regeneration temperatures can be reduced, and the CO2 adsorption capacity is maintained. In this study, the reaction between CO2 and Li2CaSiO4, composed of stoichiometric CaO, Li2O, and SiO2, was evaluated thermodynamically by DFT. The synthesized Li2CaSiO4 with and without alkali carbonates was used as CO2 sorbents, and their CO2 adsorption performances were examined using thermal analyses. The phase and morphology of Li2CaSiO4 before and after CO2 adsorption were characterized by XRD and SEM. According to the thermodynamic evaluation and the XRD results, Li2CaSiO4 could adsorb CO2 and form CaCO3 and Li2SiO3. The thermal analyses showed that the regeneration of Li2CaSiO4 started from 575 °C, at which it was difficult to realize the CO2 diffusion through the solid CaCO3 product layer. The mixed alkali carbonates can improve the kinetics and facilitate the CO2 adsorption of Li2CaSiO4. Alkali carbonates were effective in reducing the activation energy of the reaction and CO2 diffusion at low temperatures and improving the cyclic stability because of the dispersing carbonation products.
RESUMO
The relocation of peripheral transistors from the front-end-of-line (FEOL) to the back-end-of-line (BEOL) in fabrication processes is of significant interest, as it allows for the introduction of novel functionality in the BEOL while providing additional die area in the FEOL. Oxide semiconductor-based transistors serve as attractive candidates for BEOL. Within these categories, In2O3 material is particularly notable; nonetheless, the excessive intrinsic carrier concentration poses a limitation on its broader applicability. Herein, the deposition of Hf-doped In2O3 (IHO) films via atomic layer deposition for the first time demonstrates an effective method for tuning the intrinsic carrier concentration, where the doping concentration plays a critical role in determine the properties of IHO films and all-oxide structure transistors with Au-free process. The all-oxide transistors with In2O3: HfO2 ratio of 10:1 exhibited optimal electrical properties, including high on-current with 249 µA, field-effect mobility of 13.4 cm2 V-1 s-1, and on/off ratio exceeding 106, and also achieved excellent stability under long time positive bias stress and negative bias stress. These findings suggest that this study not only introduces a straightforward and efficient approach to improve the properties of In2O3 material and transistors, but as well paves the way for development of all-oxide transistors and their integration into BEOL technology.
RESUMO
Transition metal single atom electrocatalysts (SACs) with metal-nitrogen-carbon (M-N-C) configuration show great potential in oxygen evolution reaction (OER), whereby the spin-dependent electrons must be allowed to transfer along reactants (OH- /H2 O, singlet spin state) and products (O2 , triplet spin state). Therefore, it is imperative to modulate the spin configuration in M-N-C to enhance the spin-sensitive OER energetics, which however remains a significant challenge. Herein, we report a local field distortion induced intermediate to low spin transition by introducing a main-group element (Mg) into the Fe-N-C architecture, and decode the underlying origin of the enhanced OER activity. We unveil that, the large ionic radii mismatch between Mg2+ and Fe2+ can cause a FeN4 in-plane square local field deformation, which triggers a favorable spin transition of Fe2+ from intermediate (dxy 2 dxz 2 dyz 1 dz2 1 , 2.96 µB ) to low spin (dxy 2 dxz 2 dyz 2 , 0.95 µB ), and consequently regulate the thermodyna-mics of the elementary step with desired Gibbs free energies. The as-obtained Mg/Fe dual-site catalyst demonstrates a superior OER activity with an overpotential of 224â mV at 10â mA cm-2 and an electrolysis voltage of only 1.542â V at 10â mA cm-2 in the overall water splitting, which outperforms those of the state-of-the-art transition metal SACs.
RESUMO
The proton, as the cationic form of the lightest element-H, is regarded as most ideal charge carrier in "rocking chair" batteries. However, current research on proton batteries is still at its infancy, and they usually deliver low capacity and suffer from severe acidic corrosion. Herein, electrochemically activated metallic H1.75MoO3 nanobelts are developed as a stable electrode for proton storage. The electrochemically pre-intercalated protons not only bond directly with the terminal O3 site via strong O-H bonds but also interact with the oxygens within the adjacent layers through hydrogen bonding, forming a hydrogen-bonding network in H1.75MoO3 nanobelts and enabling a diffusion-free Grotthuss mechanism as a result of its ultralow activation energy of â¼0.02 eV. To the best of our knowledge, this is the first reported inorganic electrode exhibiting Grotthuss mechanism-based proton storage. Additionally, the proton intercalation into MoO3 with formation of H1.75MoO3 induces strong Jahn-Teller electron-phonon coupling, rendering a metallic state. As a consequence, the H1.75MoO3 shows an outstanding fast charging performance and maintains a capacity of 111 mAh/g at 2500 C, largely outperforming the state-of-art battery electrodes. More importantly, a symmetric proton ion full cell based on H1.75MoO3 was assembled and delivered an energy density of 14.7 Wh/kg at an ultrahigh power density of 12.7 kW/kg, which outperforms those of fast charging supercapacitors and lead-acid batteries.
RESUMO
Density functional theory (DFT) calculations were performed to study the interaction of water with the SrO and FeO2 terminations of the SrFeO3-δ (001) surface, where the effects of the metal dopants (Al, Zr, Nb, and W), surface oxygen vacancies, and oxygen ion migration were investigated. Our calculations showed that the metal dopants benefited the molecular and dissociative adsorptions of H2O on both the perfect and oxygen-vacancy-containing surfaces. The surface oxygen vacancies were predicted to promote the dissociative adsorption of H2O and the formation of H2. For all structures studied, H2 release was found to be always an overall endothermic process, except for the W-doped structure which will become exothermic at high temperature. On the oxygen-vacancy-containing surface, H2 generation was predicted to be easier at the SrO termination than the FeO2 termination. Furthermore, we also investigated the oxygen ion migration mechanism on all surface structures, predicted the behaviour of oxygen migration and the effect of oxygen vacancy defects. Our results showed that Al doping facilitated not only the formation of surface oxygen vacancies, but also oxygen migration from the surface to the subsurface, in contrast to the Zr, Nb and W-doped structures. This study provided significant insights into the interaction of water with the surfaces of doped SrFeO3-δ perovskite materials for thermochemical water splitting applications.
RESUMO
Although Li4SiO4-based sorbents are candidates for CO2 capture at high temperatures, it is still necessary to improve their kinetic activation for adsorption and desorption. Carbonate doping to Li4SiO4 is considered as one of the effective means to improve CO2 capture by Li4SiO4. In this study, Li4SiO4 was synthesized using Li2CO3 and SiO2 at 900 °C, and mixed with different amounts of Na2CO3 as CO2 sorbents. The effects of Na2CO3 on the absorption and desorption were characterized using thermal analyses in an atmosphere of 80 vol% CO2-20 vol% N2. In situ Raman and XRD were used for the characterization of the structural transformations and phase evolution during the CO2 capture. The activation energy of both chemisorption and diffusion in adsorption dropped significantly. The additive Na2CO3 can react with CO2 and produce the pyrocarbonate, which is favorable for CO2 capture of Li4SiO4 and CO2 diffusion. The doped Na2CO3 served two functions: producing the intermediate product and forming the melt with the product Li2CO3 to accelerate CO2 transport. The Na2CO3-doped Li4SiO4 exhibits stable cyclic durability with conversions of 75% in 20 adsorption-desorption cycles.
RESUMO
Density functional theory calculations were performed to investigate the structural, electronic, and oxygen ion migration properties of B-site ion doped SrFeO3-δ perovskite (B = Al, Zr, Nb, and W) materials, which were used as oxygen transport membranes (OTMs) for pure oxygen output and catalytic reactions. The results of our calculations indicate that the Fe-O bond length increased and the M-O bond length decreased with the doping of Zr, Nb, and W. And the doping of Al caused the valence state of Fe ions to increase. The states near the Fermi level were mainly contributed by Fe atoms and O atoms. The strength of the Fe-O bond gradually weakened with the increase in the valence of the doped ions. Through studying the oxygen vacancy defect and the mechanism of oxygen ion migration, it was found that the doping of Al promoted the migration of oxygen ions, while the doping of Zr, Nb, and W limited the migration of oxygen ions. This study provides important insights into the behavior of oxygen ion migration in doped SrFeO3-δ perovskite materials.
RESUMO
Millerite (NiS) is the main source for metallurgical production of nickel worldwide. To improve the extraction rate of nickel, chlorination is usually carried out, as the resulting nickel chloride (NiCl2) can easily dissolve in water and be separated. Although molecular chlorine (Cl2) can be used as the chlorination reagent, greener reagents such as ammonium chloride (NH4Cl) are preferable from a process design perspective. However, the efficiency of NH4Cl as a chlorination reagent must be further improved for this process to be viable for industrial applications, and mechanistic understanding is imperative to this end. Here, we performed extensive density functional theory (DFT) calculations to elucidate the chlorination mechanism of NiS by exploring three possible pathways. We first considered the direct chlorination of NiS by Cl2, which was suggested to form by the reaction between NH4Cl and SO3 catalyzed by a metal oxide. Alternatively, NH4Cl was found to react favorably with the partially or fully oxidized NiS surface in the presence of oxygen (O2). During the oxidation of NiS, sulfur dioxide (SO2) may form. Furthermore, sulfur or oxygen vacancy was predicted to form during the chlorination of NiS or NiO with NH4Cl. Based on the available experimental evidence and our computational results, three possible mechanisms for the chlorination of NiS using NH4Cl as the chlorination reagent in the presence of O2 were proposed.
RESUMO
Sodium orthosilicate was synthesized by a wet chemical method with further calcination at 600 °C. Mixtures of Na4SiO4 and alkali (Li/Na/K) carbonates were prepared by a mechanical mixing method. The CO2 capture performance of the samples was characterized by dynamic thermogravimetric analyses and in situ XRD and Raman spectroscopy in 80 vol% CO2 mixed with 20 vol% N2. It was found that sodium orthosilicate could be used for CO2 sorption, and its maximum capacity could reach up to 19.2 wt%. The addition of alkali carbonates, which serve as promoters, led to the enhancement of the CO2 capture performance of Na4SiO4, especially at low temperatures, because of the formation of C2O52-. The existence of C2O52- in the mixture exposed to 80 vol% CO2 was confirmed by in situ Raman spectra, and its geometric structure was presented by DFT calculations. The formation of C2O52- within carbonates exhibited a positive influence on the CO2 capture at low temperatures and the enhancement of CO2 diffusion by Grotthuss-like transport through the carbonate product shell at high temperatures besides the formation of eutectic carbonate melts.
RESUMO
Experimental and computational studies were carried out to investigate the oxidation of pentlandite (Fe4.5Ni4.5S8). The oxidation product was first analyzed by energy dispersive spectrometry to reveal the elemental distribution at the cross section. Our experimental study shows that the Fe atoms in pentlandite migrated to the surface and were preferentially oxidized to form a thin layer of Fe2O3, whereas the Ni atoms remained at the center of the grain. Furthermore, density functional theory calculations were performed to investigate the adsorption and diffusion of atomic oxygen as well as the adsorption and dissociation of molecular oxygen on the (001) and (010) surfaces of pentlandite. From the calculated adsorption energies of atomic oxygen at the different sites of the (001) and (010) surfaces, we found that oxidation of the Fe sites was preferable to that of the Ni sites when exposed to an oxidizing atmosphere. For molecular oxygen adsorption on the surfaces of pentlandite, the bridge sites (Fe-Ni and Fe-Fe) were found to be the most favorable adsorption sites. The dissociative adsorption of O2 is thermodynamically more favorable than the molecular adsorption. Calculated dissociation barriers show that the oxidation is feasible during high temperature roasting.
RESUMO
Silicon carbide (SiC), titanium carbide (TiC), zirconium carbide (ZrC), and tantalum carbide (TaC) have been electrochemically produced directly from their corresponding stoichiometric metal oxides/carbon (MOx/C) precursors by electrodeoxidation in molten calcium chloride (CaCl2). An assembled yttria stabilized zirconia solid oxide membrane (SOM)-based anode was employed to control the electrodeoxidation process. The SOM-assisted controllable electrochemical process was carried out in molten CaCl2 at 1000 °C with a potential of 3.5 to 4.0 V. The reaction mechanism of the electrochemical production process and the characteristics of these produced metal carbides (MCs) were systematically investigated. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy analyses clearly identify that SiC, TiC, ZrC, and TaC carbides can be facilely fabricated. SiC carbide can be controlled to form a homogeneous nanowire structure, while the morphologies of TiC, ZrC, and TaC carbides exhibit porous nodular structures with micro/nanoscale particles. The complex chemical/electrochemical reaction processes including the compounding, electrodeoxidation, dissolution-electrodeposition, and in situ carbonization processes in molten CaCl2 are also discussed. The present results preliminarily demonstrate that the molten salt-based SOM-assisted electrodeoxidation process has the potential to be used for the facile and controllable electrodeoxidation of MOx/C precursors to micro/nanostructured MCs, which can potentially be used for various applications.
RESUMO
Constructing a three-dimensional (3D) structure along with Zn (002) texture selective exposure is a promising strategy to tackle the issues faced by Zn metal anodes. Herein, for the first time, we proposed an electrochemical stripping strategy to achieve controlled modification of the texture and microstructure of zinc foils in one step, building a hierarchical structure with (002) texture preferred exposed Zn (SZ). The SZ with favorable zincophilic properties not only can reduce the concentration polarization at the interface but also allow Zn to grow horizontally on the edge of the (002) texture by guiding the adsorption sites for Zn2+. Moreover, the honeycomb-like structure is beneficial to rearrange the distribution of the Zn2+ flux as well as alleviating stress changes during cycling. Thus, the SZ||Cu cell exhibits excellent stability with a Coulombic efficiency of 99.76% over 1800 cycles. The SZ||NaV3O8·xH2O cell with inconspicuous self-discharge effect maintains a high areal capacity of 3.67 mA h cm-2 even after 700 cycles with a low N/P ratio of 3.6. This work achieves texture architecture and structure designing on Zn foils simultaneously by metallurgical electrochemical methods and opens up a potential strategy to implement the practicality of zinc metal anodes.
RESUMO
The short-range order (SRO) structure in high-entropy alloys (HEAs) is closely associated with many properties, which can be studied through density functional theory (DFT) calculations. Atomic-scale modeling and calculations require substantial computational resources, and machine learning can provide rapid estimations of DFT results. To describe SRO information in HEAs, a new descriptor based on Voronoi Analysis and Shannon Entropy (VASE) is proposed. Based on Voronoi analysis, the Shannon entropy is introduced to directly characterize atomic spatial arrangement information except for composition and atomic interactions, which is necessary for describing the disorder atomic occupancy in HEAs. The new descriptor is used for predicting the formation energy of FeCoNiAlTiCu system based on machine learning model, which is more accurate than other descriptors (Coulomb matrices, partial radial distribution functions, and Voronoi analysis). Moreover, the model trained based on VASE descriptors exhibits the best predictive performance for unrelaxed structures (24.06 meV/atom). The introduction of Shannon entropy provides an effective representation of atomic arrangement information in HEAs, which is a powerful tool for investigating the SRO phenomena.