A Retro-biosynthesis-Based Route to Generate Pinene-Derived Polyesters.

Significantly increased production of biobased polymers is a prerequisite to replace petroleum-based materials towards reaching a circular bioeconomy. However, many renewable building blocks from wood and other plant material are not directly amenable for polymerization, due to their inert backbones and/or lack of functional group compatibility with the desired polymerization type. Based on a retro-biosynthetic analysis of polyesters, a chemoenzymatic route from (-)-α-pinene towards a verbanone-based lactone, which is further used in ring-opening polymerization, is presented. Generated pinene-derived polyesters showed elevated degradation and glass transition temperatures, compared with poly(ϵ-decalactone), which lacks a ring structure in its backbone. Semirational enzyme engineering of the cyclohexanone monooxygenase from Acinetobacter calcoaceticus enabled the biosynthesis of the key lactone intermediate for the targeted polyester. As a proof of principle, one enzyme variant identified from screening in a microtiter plate was used in biocatalytic upscaling, which afforded the bicyclic lactone in 39 % conversion in shake flask scale reactions.

Reversibly crosslinked polyurethane fibres from sugar-based 5-chloromethylfurfural: Synthesis, fibre-spinning and fibre-to-fibre recycling.

The development of recyclable crosslinked thermosetting fibres is a challenging research topic. In the present work, we have designed and synthesized polyurethane fibres from fructose-derived 5-chloromethylfurfural (CMF) and lignin-derived monomeric phenols. The greenhouse gas emissions associated with the production of CMF showed comparable results to that of 5-hydroxymethylfurfural (HMF), a high potential sugar-based platform molecule. The wet-spun biobased polyurethane fibres produced could be conveniently crosslinked using Diels-Alder chemistry to effectively enhance the glass transition temperature and mechanical properties. At a mildly elevated temperature (140 °C), the chemically crosslinked fibres could be effectively de-crosslinked, which enabled complete separation from a mixture with poly(ethylene terephthalate) (PET) and cotton fibres. These results outline a potential strategy to design and fabricate new biobased fibres with reversible crosslinking, which may enable fibre-to-fibre recycling.

Designing Biobased Recyclable Polymers for Plastics.

Several concurrent developments are shaping the future of plastics. A transition to a sustainable plastics system requires not only a shift to fossil-free feedstock and energy to produce the carbon-neutral building blocks for polymers used in plastics, but also a rational design of the polymers with both desired material properties for functionality and features facilitating their recyclability. Biotechnology has an important role in producing polymer building blocks from renewable feedstocks, and also shows potential for recycling of polymers. Here, we present strategies for improving the performance and recyclability of the polymers, for enhancing degradability to monomers, and for improving chemical recyclability by designing polymers with different chemical functionalities.

An economical biorefinery process for propionic acid production from glycerol and potato juice using high cell density fermentation.

An economically sustainable process was developed for propionic acid production by fermentation of glycerol using Propionibacterium acidipropionici and potato juice, a by-product of starch processing, as a nitrogen/vitamin source. The fermentation was done as high-cell-density sequential batches with cell recycle. Propionic acid production and glycerol consumption rates were dependent on initial biomass concentration, and reached a maximum of 1.42 and 2.30 g L(-1) h(-1), respectively, from 50 g L(-1) glycerol at initial cell density of 23.7 gCDW L(-1). Halving the concentration of nitrogen/vitamin source resulted in reduction of acetic and succinic acids yields by ~39% each. At glycerol concentrations of 85 and 120 g L(-1), respectively, 43.8 and 50.8 g L(-1) propionic acid were obtained at a rate of 0.88 and 0.29 g L(-1) h(-1) and yield of 84 and 78 mol%. Succinic acid was 13 g% of propionic acid and could represent a potential co-product covering the cost of nitrogen/vitamin source.

Optimization of a two-step process comprising lipase catalysis and thermal cyclization improves the efficiency of synthesis of six-membered cyclic carbonate from trimethylolpropane and dimethylcarbonate.

Six-membered cyclic carbonates are potential monomers for phosgene and/or isocyanate free polycarbonates and polyurethanes via ring-opening polymerization. A two-step process for their synthesis comprising lipase-catalyzed transesterification of a polyol, trimethylolpropane (TMP) with dimethylcarbonate (DMC) in a solvent-free system followed by thermal cyclization was optimized to improve process efficiency and selectivity. Using full factorial designed experiments and partial least squares (PLS) modeling for the reaction catalyzed by Novozym®435 (N435; immobilized Candida antarctica lipase B), the optimum conditions for obtaining either high proportion of monocarbonated TMP and TMP-cyclic-carbonate (3 and 4), or dicarbonated TMP and monocarbonated TMP-cyclic-carbonate (5 and 6) were found. The PLS model predicted that the reactions using 15%-20% (w/w) N435 at DMC:TMP molar ratio of 10-30 can reach about 65% total yield of 3 and 4 within 10 h, and 65%-70% total yield of 5 and 6 within 32-37 h, respectively. High consistency between the predicted results and empirical data was shown with 66.1% yield of 3 and 4 at 7 h and 67.4% yield of 5 and 6 at 35 h, using 18% (w/w) biocatalyst and DMC:TMP molar ratio of 20. Thermal cyclization of the product from 7 h reaction, at 110°C in the presence of acetonitrile increased the overall yield of cyclic carbonate 4 from about 2% to more than 75% within 24 h. N435 was reused for five consecutive batches, 10 h each, to give 3+4 with a yield of about 65% in each run.