A renewably sourced, circular photopolymer resin for additive manufacturing.

The additive manufacturing of photopolymer resins by means of vat photopolymerization enables the rapid fabrication of bespoke 3D-printed parts. Advances in methodology have continually improved resolution and manufacturing speed, yet both the process design and resin technology have remained largely consistent since its inception in the 1980s1. Liquid resin formulations, which are composed of reactive monomers and/or oligomers containing (meth)acrylates and epoxides, rapidly photopolymerize to create crosslinked polymer networks on exposure to a light stimulus in the presence of a photoinitiator2. These resin components are mostly obtained from petroleum feedstocks, although recent progress has been made through the derivatization of renewable biomass3-6 and the introduction of hydrolytically degradable bonds7-9. However, the resulting materials are still akin to conventional crosslinked rubbers and thermosets, thus limiting the recyclability of printed parts. At present, no existing photopolymer resin can be depolymerized and directly re-used in a circular, closed-loop pathway. Here we describe a photopolymer resin platform derived entirely from renewable lipoates that can be 3D-printed into high-resolution parts, efficiently deconstructed and subsequently reprinted in a circular manner. Previous inefficiencies with methods using internal dynamic covalent bonds10-17 to recycle and reprint 3D-printed photopolymers are resolved by exchanging conventional (meth)acrylates for dynamic cyclic disulfide species in lipoates. The lipoate resin platform is highly modular, whereby the composition and network architecture can be tuned to access printed materials with varied thermal and mechanical properties that are comparable to several commercial acrylic resins.

Microclimate and the thermal comfort during the implementation of silvopastoral systems: the windbreak countereffect.

Little has been studied about microclimate and the thermal comfort during the implementation of silvopastoral systems. This study aimed to evaluate the microclimate and thermal comfort during the implementation of High Biodiversity Silvopastoral System with Nuclei (SPSnu). Three treatments were investigated, SPSnu with 5 and 10% of the pasture area with nuclei, (SPSnu5 and SPSnu10, respectively), and treeless pasture (TLP). Each treatment was subdivided into 4 areas: within the nuclei, around the nuclei, around the nuclei with shade and internuclei. The analyzed variables were soil surface temperature, air temperature, wind speed, relative humidity, black globe temperature and the Heat Load Index (HLI) at 20 and 120 cm height. We hypothesized that the wind speed reduction associated with insufficient shade projection typical of the first years of SPSs may interfere in microclimate and thermal comfort during the hot seasons. SPSnu5 and SPSnu10 had a reduction in wind speed of 51.58% and 68.47% respectively when compared to TLP at 20 cm. Soil surface temperature and air temperature at 120 cm were higher for SPSnu than TLP. The same effect was observed for the HLI. At 20 cm, HLI indicated better thermal comfort in TLP than in the SPSnu treatments. The lack of shade projection from young nuclei in conjunction with the decrease of wind speed between the nuclei caused a higher air temperature and HLI in the SPSnu treatments, we called this conditions, windbreak countereffect. Farmers must knowledge this effect when implementing SPSs, and when necessary, mitigate with the proper management decisions.

CLEC5A expression can be triggered by spike glycoprotein and may be a potential target for COVID-19 therapy.

The immune response is crucial for coronavirus disease 19 (COVID-19) progression, with the participation of proinflammatory cells and cytokines, inducing lung injury and loss of respiratory function. CLEC5A expression on monocytes can be triggered by viral and bacterial infections, leading to poor outcomes. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is able to induce neutrophil activation by CLEC5A and Toll-like receptor 2, leading to an aggressive inflammatory cascade, but little is known about the molecular interactions between CLEC5A and SARS-CoV-2 proteins. Here, we aimed to explore how CLEC5A expression could be affected by SARS-CoV-2 infection using immunological tools with in vitro, in vivo, and in silico assays. The findings revealed that high levels of CLEC5A expression were found in monocytes from severe COVID-19 patients in comparison with mild COVID-19 and unexposed subjects, but not in vaccinated subjects who developed mild COVID-19. In hamsters, we detected CLEC5A gene expression during 3-15 days of Omicron strain viral challenge. Our results also showed that CLEC5A can interact with SARS-CoV-2, promoting inflammatory cytokine production, probably through an interaction with the receptor-binding domain in the N-acetylglucosamine binding site (NAG-601). The high expression of CLEC5A and high levels of proinflammatory cytokine production were reduced in vitro by a human CLEC5A monoclonal antibody. Finally, CLEC5A was triggered by spike glycoprotein, suggesting its involvement in COVID-19 progression; therapy with a monoclonal antibody could be a good strategy for COVID-19 treatment, but vaccines are still the best option to avoid hospitalization/deaths.

Mitofusin 1 is required for oocyte growth and communication with follicular somatic cells.

Mitochondrial function, largely regulated by the dynamics of this organelle, is inextricably linked to the oocyte health. In comparison with most somatic cells, mitochondria in oocytes are smaller and rounder in appearance, suggesting limited fusion. The functional implications of this distinct morphology, and how changes in the mitochondrial shape translate to mitochondrial function in oogenesis is little understood. We, therefore, asked whether the pro-fusion proteins mitofusins 1 (MFN1) and 2 (MFN2) are required for the oocyte development. Here we show that oocyte-specific deletion of Mfn1, but not Mfn2, prevents the oocyte growth and ovulation due to a block in folliculogenesis. We pinpoint the loss of oocyte growth and ovulation to impaired PI3K-Akt signaling and disrupted oocyte-somatic cell communication. In support, the double loss of Mfn1 and Mfn2 partially rescues the impaired PI3K-Akt signaling and defects in oocyte development secondary to the single loss of Mfn1. Together, this work demonstrates that the mitochondrial function influences the cellular signaling during the oocyte development, and highlights the importance of distinct, nonredundant roles of MFN1 and MFN2 in oogenesis.

Biological and antimicrobial properties of the association Ambroxol and a water-soluble viscous liquid as a vehicle for a tricalcium silicate-based sealer.

This study aimed to investigate the antimicrobial and biological properties of Ambroxol associated with glycerin (GLI), propylene glycol (PG), and polyethylene glycol (PEG) as a possible vehicle for an experimental tricalcium silicate sealer, with the intention of developing a new biomaterial. Mouse undifferentiated dental pulp cells (OD-21) were cultured, and the effects of different association on cell proliferation and inflammatory cytokine production were investigated. Antimicrobial adhesion of Enterococcus faecalis to setting sealers at 2 h was evaluated. Polyethylene tubes containing experimental sealers and empty tubes were implanted into dorsal connective tissues of 12 male 3- to 4-months-old Wistar rats (250-280 g). After 7 and 30 days, the tubes were removed and processed for histological and immunohistochemical analyses. ANOVA followed by Bonferroni correction and ANOVA followed by Tukey test was used for parametric data and Kruskal-Wallis followed by Dunn for nonparametric (p < 0.05). Cell proliferation was dose-dependent, since all association were cytotoxic at higher concentrations; however, Ambroxol-PEG showed significantly higher cytotoxicity than other association (p < 0.05). In addition, irrespective of the association, no cytokine production was observed in vitro. Ambroxol-GLI reduced bacterial viability, whereas Ambroxol-PEG increased (p < 0.05). Histological examination showed no significant difference in the inflammatory response (p > 0.05) and mineralization ability in all association. Additionally, IL-1ß and TNF-α were upregulated on Ambroxol-PEG in relation to Control at 07 days (p < 0.05). Ambroxol-GLI was the best vehicle for experimental tricalcium silicate sealer, as it promoted an increase in antimicrobial activity without altering the inflammatory response or mineralization ability.

Mice born to females with oocyte-specific deletion of mitofusin 2 have increased weight gain and impaired glucose homeostasis.

Offspring born to obese and diabetic mothers are prone to metabolic diseases, a phenotype that has been linked to mitochondrial dysfunction and endoplasmic reticulum (ER) stress in oocytes. In addition, metabolic diseases impact the architecture and function of mitochondria-ER contact sites (MERCs), changes which associate with mitofusin 2 (MFN2) repression in muscle, liver and hypothalamic neurons. MFN2 is a potent modulator of mitochondrial metabolism and insulin signaling, with a key role in mitochondrial dynamics and tethering with the ER. Here, we investigated whether offspring born to mice with MFN2-deficient oocytes are prone to obesity and diabetes. Deletion of Mfn2 in oocytes resulted in a profound transcriptomic change, with evidence of impaired mitochondrial and ER function. Moreover, offspring born to females with oocyte-specific deletion of Mfn2 presented increased weight gain and glucose intolerance. This abnormal phenotype was linked to decreased insulinemia and defective insulin signaling, but not mitochondrial and ER defects in offspring liver and skeletal muscle. In conclusion, this study suggests a link between disrupted mitochondrial/ER function in oocytes and increased risk of metabolic diseases in the progeny. Future studies should determine whether MERC architecture and function are altered in oocytes from obese females, which might contribute toward transgenerational transmission of metabolic diseases.

Bio-Based Lignin Nanocarriers Loaded with Fungicides as a Versatile Platform for Drug Delivery in Plants.

Lignin-based nano- and microcarriers are a promising biodegradable drug delivery platform inside of plants. Many wood-decaying fungi are capable of degrading the wood component lignin by segregated lignases. These fungi are responsible for severe financial damage in agriculture, and many of these plant diseases cannot be treated today. However, enzymatic degradation is also an attractive handle to achieve a controlled release of drugs from artificial lignin vehicles. Herein, chemically cross-linked lignin nanocarriers (NCs) were prepared by aza-Michael addition in miniemulsion, followed by solvent evaporation. The cross-linking of lignin was achieved with the bio-based amines (spermine and spermidine). Several fungicides-namely, azoxystrobin, pyraclostrobin, tebuconazole, and boscalid-were encapsulated in situ during the miniemulsion polymerization, demonstrating the versatility of the method. Lignin NCs with diameters of 200-300 nm (determined by dynamic light scattering) were obtained, with high encapsulation efficiencies (70-99%, depending on the drug solubility). Lignin NCs successfully inhibited the growth of Phaeomoniella chlamydospora and Phaeoacremonium minimum, which are lignase-producing fungi associated with the worldwide occurring fungal grapevine trunk disease Esca. In planta studies proved their efficiency for at least 4 years after a single injection into Vitis vinifera ("Portugieser") plants on a test vineyard in Germany. The lignin NCs are of high interest as biodegradable delivery vehicles to be applied by trunk injection against the devastating fungal disease Esca but might also be promising against other fungal plant diseases.

Cytotoxicity of bismuth nanoparticles in the murine macrophage cell line RAW 264.7.

A promising use of bismuth nanoparticles (BiNPs) for different biomedical applications leads to a search for the elucidation of their toxicity mechanisms, since toxicity studies are still at early stage. In the current study, cytotoxic effects of BiNPs produced by laser ablation in solution (LASiS) was investigated in the murine macrophage line RAW 264.7. The cells were exposed to 0.01-50 µg ml-1 of BiNPs for 24 and 48 h and then cytotoxicity assays were performed. Decrease of MTT conversion to formazan and of cell attachment were observed with no effects on cell proliferation. No loss of membrane integrity or significant changes of ROS and RNS levels were observed in exposed cells. Foremost, increased phagocytic activity and DNA repair foci occurred for cells exposed to BiNPs. These effects are important findings that must be considered in the case of biomedical application of BiNPs, since inappropriate macrophages activation and inactivation may lead to immunotoxicity. Bismuth nanoparticles (BiNPs) produced by laser ablation in solution and stabilized with BSA decrease enzyme-dependent MTT conversion to formazan and increase phagocytic activity and DNA repair foci in murine macrophage line RAW 264.7 when exposed to 50 µg ml-1. These effects are findings that should be considered in the case of biomedical application of BiNPs, since inappropriate macrophages activation and inactivation may lead to immunotoxicity.

Malignancy and tumorigenicity of melanoma B16 cells are not affected by silver and gold nanoparticles.

Gold (AuNP) and silver (AgNP) nanoparticles have been incorporated into many therapeutic and diagnostic applications. However, previous studies revealed toxic properties as well as the hormesis phenomenon of many nanoparticles in different biological models. To evaluate the effects of low concentrations of AuNP and AgNP on murine melanoma cells B16F1 and B16F10 and relate them with phenotype changes, cells were exposed for 24 and 48 h. No cytotoxicity was observed for B16 cells through neutral red, MTT, trypan blue, and crystal violet assays at concentrations from 0.01 to 10 ng mL-1. Likewise, the nanoparticles did not interfere with drug-efflux activity, cell migration, cell cycle, and colony formation. Slight toxicity was observed for B16F10 exposed to 100 ng mL-1, with a decreased number of viable and attached cells, indicating differential sensitivity of B16F1 and B16F10 cells to the nanoparticles. Furthermore, colony size dispersion decreased for both B16 cell sub-lines. Therefore, there is no evidence that the tested concentrations of AuNP and AgNP can render B16 cells more aggressive and malignant, which is important since both nanoparticles are already largely used in nanotechnological products. Considering studies that have showed the hormesis effect of nanoparticles at low concentrations, which could protect cancer cells against chemotherapy, further investigation is advised.

The role of mitochondria in the female germline: Implications to fertility and inheritance of mitochondrial diseases.

Mitochondria play a fundamental role during development of the female germline. They are fragmented, round, and small. Despite these characteristics suggesting that they are inactive, there is accumulating evidence that mitochondrial dysfunctions are a major cause of infertility and generation of aneuploidies in humans. In addition, mitochondria and their own genomes (mitochondrial DNA-mtDNA) may become damaged with time, which might be one reason why aging leads to infertility. As a result, mitochondria have been proposed as an important target for evaluating oocyte and embryo quality, and developing treatments for female infertility. On the other hand, mutations in mtDNA may cause mitochondrial dysfunctions, leading to severe diseases that affect 1 in 4,300 people. Moreover, very low levels of mutated mtDNA seem to be present in every person worldwide. These may increase with time and associate with late-onset degenerative diseases such as Parkinson disease, Alzheimer disease, and common cancers. Mutations in mtDNA are transmitted down the maternal lineage, following a poorly understood pattern of inheritance. Recent findings have indicated existence in the female germline of a purifying filter against deleterious mtDNA variants. Although the underlying mechanism of this filter is largely unknown, it has been suggested to rely on autophagic degradation of dysfunctional mitochondria or selective replication/transmission of non-deleterious variants. Thus, understanding the mechanisms regulating mitochondrial inheritance is important both to improve diagnosis and develop therapeutic tools for preventing transmission of mtDNA-encoded diseases.

Improving the Performance of Photoactive Terpene-Based Resin Formulations for Light-Based Additive Manufacturing.

Photocurable liquid formulations have been a key research focus for the preparation of mechanically robust and thermally stable networks. However, the development of renewable resins to replace petroleum-based commodities presents a great challenge in the field. From this perspective, we disclose the design of photoactive resins based on terpenes and itaconic acid, both potentially naturally sourced, to prepare photosets with adjustable thermomechanical properties. Biobased perillyl itaconate (PerIt) was synthesized from renewable perillyl alcohol and itaconic anhydride via a scalable solvent-free method. Photoirradiation of PerIt in the presence of a multiarm thiol and photoinitiator led to the formation of networks over a range of compositions. Addition of nonmodified terpenes (perillyl alcohol, linalool, or limonene) as reactive diluents allowed for more facile preparation of photocured networks. Photosets within a wide range of properties were accessed, and these could be adjusted by varying diluent type and thiol stoichiometry. The resins showed rapid photocuring kinetics and the ability to form either brittle or elastic materials, with Young's modulus and strain at break ranging from 3.6 to 358 MPa and 15 to 367%, respectively, depending on the chemical composition of the resin. Glass transition temperatures (Tg) were influenced by thioether content, with temperatures ranging from 5 to 43 °C, and all photosets displayed good thermal resistance with Td,5% > 190 °C. Selected formulations containing PerIt and limonene demonstrated suitability for additive manufacturing technologies and high-resolution objects were printed via digital light processing (DLP). Overall, this work presents a simple and straightforward route to prepare renewable resins for rapid prototyping applications.

Assessment of the cytotoxic, genotoxic, and antigenotoxic activities of Celtis iguanaea (Jacq.) in mice.

Ethnobotanical surveys of Cerrado native plants show that leaves of Celtis iguanaea (Jacq.) Sargent (Cannabaceae), popularly known in Brazil as "esporão de galo", are used in folk medicine for body pain, asthma, cramps, poor digestion, urinary infection, kidney dysfunctions, as well as a stimulant and diuretic. This work aimed at evaluating possible C. iguanaea aqueous leaf extract (CALE) cytotoxicity, genotoxicity, and antigenotoxicity using the mouse bone marrow micronucleous test. To assess CALE genotoxicity, Swiss mice were orally treated with three different extract concentrations (100, 300, and 500 mgkg-1). To evaluate its antigenotoxicity, the same doses were used simultaneously with a single i.p. dose of mitomycin C (MMC, 4mg.kg-1). The frequencies of micronucleated polychromatic erythrocytes (MNPCE) were evaluated 24 h and 48 h after administration except for the negative control (24 h). Genotoxicity was evaluated using the frequency of micronucleated polychromatic erythrocytes (MNPCE), whereas cytotoxicity was assessed by the polychromatic and normochromatic erythrocytes ratio (PCE/NCE). The results showed that CALE did not exhibit a significant reduction in the PCE/NCE ratio, neither a considerable increase in the frequency of MNPCE. Nonetheless, CALE reduced bone marrow toxicity (increased PCE/NCE ratio) and decreased the micronuclei frequency induced by MMC. We can conclude that CALE presented no cytotoxic and genotoxic effects, but showed antigenotoxic and anticytotoxic actions under the experimental conditions applied in this study.

Laser Ablated Albumin Functionalized Spherical Gold Nanoparticles Indicated for Stem Cell Tracking.

Cell tracking in cell-based therapy applications helps distinguish cell participation among paracrine effect, neovascularization, and matrix deposition. This preliminary study examined the cellular uptake of gold nanoparticles (AuNPs), observing cytotoxicity and uptake of different sizes and AuNPs concentrations in Adipose-derived stromal cells (ASCs). ASCs were incubated for 24 h with Laser ablated Albumin functionalized spherical AuNPs (LA-AuNPs), with average sizes of 2 nm and 53 nm in diameter, in four concentrations, 127 µM, 84 µM, 42 µM, and 23 µM. Cytotoxicity was examined by Live/Dead assay, and erythrocyte hemolysis, and the effect on the cytoskeleton was investigated by immunocytochemistry for ß-actin. The LA-AuNPs were internalized by the ASCs in a size and concentration-dependent manner. Clusters were observed as dispersed small ones in the cytosol, and as a sizeable perinuclear cluster, without significant harmful effects on the cells for up to 2 weeks. The Live/Dead and hemolysis percentage results complemented the observations that the larger 53 nm LA-AuNPs in the highest concentrated solution significantly lowered cell viability. The demonstrated safety, cellular uptake, and labelling persistency with LA-AuNPs, synthesized without the combination of chemical solutions, support their use for cell tracking in tissue engineering applications.

Sex differences in the relationship between hepatic steatosis, mood and anxiety disorders.

OBJECTIVE: To investigate the association between non-alcoholic fatty liver disease (NAFLD), alcoholic liver disease (ALD), mental symptoms (mood, anxiety disorders and distress) by sex. METHODS: This a cross-sectional study performed in working-age adults from a Health Promotion Center (primary care) in São Paulo, Brazil. Self-reported mental symptoms from rating scales (21-item Beck Anxiety Inventory, Patient Health Questionnaire-9, and K6 distress scale) were evaluated by hepatic steatosis (NAFLD and ALD). Logistic regression models estimated the association between hepatic steatosis subtypes and mental symptoms by Odds ratios (OR) adjusted by confounders in the total sample and sex stratified. RESULTS: Among 7241 participants (70.5% men, median age: 45 years), the frequency of steatosis was of 30.7% (25.1% NAFLD), being higher in men than women (70.5% vs. 29.5%, p < 0.0001), regardless of the steatosis subtype. Metabolic risk factors were similar in both subtypes of steatosis, but not mental symptoms. Overall, NAFLD was inversely associated with anxiety (OR = 0.75, 95%CI 0.63-0.90) and positively associated with depression (OR = 1.17, 95%CI 1.00-1.38). On the other hand, ALD was positively associated with anxiety (OR = 1.51; 95%CI 1.15-2.00). In sex-stratified analyses, only men presented an association of anxiety symptoms with NAFLD (OR = 0.73; 95%CI 0.60-0.89) and ALD (OR = 1.60; 95%CI 1.18-2.16). CONCLUSIONS: The complex association between different types of steatosis (NAFLD and ALD), mood and anxiety disorders indicates the need for a deeper understanding of their common causal pathways.

Biopolymer-based nanocarriers for sustained release of agrochemicals: A review on materials and social science perspectives for a sustainable future of agri- and horticulture.

Devastating plant diseases and soil depletion rationalize an extensive use of agrochemicals to secure the food production worldwide. The sustained release of fertilizers and pesticides in agriculture is a promising solution to the eco-toxicological impacts and it might reduce the amount and increase the effectiveness of agrochemicals administration in the field. This review article focusses on carriers with diameters below 1 µm, such as capsules, spheres, tubes and micelles that promote the sustained release of actives. Biopolymer nanocarriers represent a potentially environmentally friendly alternative due to their renewable origin and biodegradability, which prevents the formation of microplastics. The social aspects, economic potential, and success of commercialization of biopolymer based nanocarriers are influenced by the controversial nature of nanotechnology and depend on the use case. Nanotechnology's enormous innovative power is only able to unfold its potential to limit the effects of climate change and to counteract current environmental developments if the perceived risks are understood and mitigated.

Effect of nonsteroidal anti-inflammatory drugs (NSAIDs) association on physicochemical and biological properties of tricalcium silicate-based cement.

The aim of this study was to investigate the physicochemical and biological properties of an experimental tricalcium silicate-based repair cement containing diclofenac sodium (CERD). For the physicochemical test, MTA, Biodentine and CERD were mixed and cement disc were prepared to evaluate the setting time and radiopacity. Root-end cavity were performed in acrylic teeth and filled with cements to analyze the solubility up to 7 days. Polyethylene tubes containing cements were prepared and calcium ions and pH were measured at 3h, 24h, 72h and 15 days. For the biological test, SAOS-2 were cultivated, exposed to cements extracts and cell proliferation were investigated by MTT assay at 6h, 24h and 48h. Polyethylene tubes containing cements were implanted into Wistar rats. After 7 and 30 days, the tubes were removed and processed for histological analyses. Parametric and nonparametric data were performed. No difference was identified in relation to setting time, radiopacity and solubility. Biodentine released more calcium ion than MTA and CERD; however, no difference between MTA and CERD were detected. Alkaline pH was observed for all cements and Biodentine exhibited highest pH. All cements promoted a raise on cell proliferation at 24h and 48h, except CERD at 48h. Biodentine stimulated cell metabolism in relation to MTA and CERD while CERD was more cytotoxic than MTA at 48h. Besides, no difference on both inflammatory response and mineralization ability for all cement were found. CERD demonstrated similar proprieties to others endodontic cements available.

Neck circumference as a marker of body adiposity in young to middle-aged adults.

OBJECTIVE: Neck circumference (NC) is a straightforward method for quantifying upper body adiposity without the limitations that other indices can have. Thus, this study aimed to analyze the relationship between NC, overall (body mass index [BMI]) and central obesity (waist circumference [WC]), and percentage of body fat (BF%) in men and women. METHODS: The associations with NC quartiles (first quartile: reference group), BMI ≥30 kg/m2, WC (>102 cm for men and >88 cm for women), and high BF% (≥21 for men and ≥29 for women) were compared and analyzed by logistic regression models adjusted for demographic characteristics, cardiovascular risk factors, and lean mass. RESULTS: In 4283 adults (mean age: 44 y, 71.8% of men), the mean NC was higher in men (40.5 cm, range: 32-55 cm) than women (34.5 cm, range: 28.5-46 cm). Among men, the fourth quartile of NC (42.5-55 cm) was positively associated with obesity (multivariable odds ratio [OR]: 2.28, 95% confidence interval [CI]: 1.1-4.48). Among women, the fourth quartile of NC (36.5-46 cm) was associated with increased WC (multivariable OR: 2.98; 95% CI: 1.59-5.60). Progressive increases in the ORs were noticed across the associations between NC quartiles (second to fourth) and high BF% in men and women. The highest ORs were observed for the associations between high BF% and the fourth quartiles of NC in men (multivariable OR: 2.42; 95% CI: 1.49-3.93) and in women (multivariable OR: 29.19; 95% CI: 14.01-60.84). CONCLUSIONS: The utility of NC as a measurement of obesity in clinical practice was demonstrated in this large sample of young to middle-aged adults. The highest NC values were positively associated with overall obesity in men and central obesity in women. Moreover, NC was closely associated with high BF% in both sexes, particularly in women.

Protective Immunity of COVID-19 Vaccination with ChAdOx1 nCoV-19 Following Previous SARS-CoV-2 Infection: A Humoral and Cellular Investigation.

Infections caused by SARS-CoV-2 induce a severe acute respiratory syndrome called COVID-19 and have led to more than six million deaths worldwide. Vaccination is the most effective preventative measure, and cellular and humoral immunity is crucial to developing individual protection. Here, we aim to investigate hybrid immunity against SARS-CoV-2 triggered by the ChAadOx1 nCoV-19 vaccine in a Brazilian cohort. We investigated the immune response from ChAadOx1 nCoV-19 vaccination in naïve (noCOVID-19) and previously infected individuals (COVID-19) by analyzing levels of D-dimers, total IgG, neutralizing antibodies (Nabs), IFN-γ (interferon-γ) secretion, and immunophenotyping of memory lymphocytes. No significant differences in D-dimer levels were observed 7 or 15 days after vaccination (DAV). All vaccinated individuals presented higher levels of total IgG or Nabs with a positive correlation (R = 0.88). Individuals in the COVID-19 group showed higher levels of antibody and memory B cells, with a faster antibody response starting at 7 DAV compared to noCOVID-19 at 15 DAV. Further, ChAadOx1 nCoV-19 vaccination led to enhanced IFN-γ production (15 DAV) and an increase in activated T CD4+ naïve cells in noCOVID-19 individuals in contrast with COVID-19 individuals. Hence, our data support that hybrid immunity triggered by ChAadOx1 nCoV-19 vaccination is associated with enhanced humoral response, together with a balanced cellular response.

Cellulose nanocarriers via miniemulsion allow Pathogen-Specific agrochemical delivery.

The current spraying of agrochemicals is unselective and ineffective, consuming a high amount of fungicides, which endangers the environment and human health. Cellulose-based nanocarriers (NCs) are a promising tool in sustainable agriculture and suitable vehicles for stimuli-responsive release of agrochemicals to target cellulase-segregating fungi, which cause severe plant diseases such as Apple Canker. Herein, cellulose was modified with undec-10-enoic acid to a hydrophobic and cross-linkable derivative, from which NCs were prepared via thiol-ene addition in miniemulsion. During the crosslinking reaction, the NCs were loaded in situ with hydrophobic fungicides, Captan and Pyraclostrobin. NCs with average sizes ranging from 200 to 300 nm and an agrochemical-load of 20 wt% were obtained. Cellulose-degrading fungi, e.g. Neonectria. ditissima which is responsible for Apple Canker, lead to the release of fungicides from the aqueous NC dispersions suppressing fungal growth. In contrast, the non-cellulase segregating fungi, e.g. Cylindrocladium buxicola, do not degrade the agrochemical-loaded NCs. This selective action against Apple Canker fungi, N. ditissima, proves the efficacy of NC-mediated drug delivery triggered by degradation in the exclusive presence of cellulolytic fungi. Cellulose NCs represent a sustainable alternative to the current unselective spraying of agrochemicals that treats many crop diseases ineffectively.