Evaluation of the efficacy of inter-dental brush and dental floss for peri-implant mucositis: A crossover randomized clinical trial.

OBJECTIVES: To evaluate the most effective method for mechanical inter-dental plaque removal between inter-dental brushes (IDB) and dental floss (DF), in addition to toothbrushing in patients affected by peri-implant mucositis (PIM); to identify possible factors related to the patient or to the single implant-supported element that could influence plaque accumulation and inflammation of peri-implant tissues. METHODS: Forty patients with PIM were recruited. They were randomly assigned to two different groups depending on inter-dental device used (IDB or DF). At baseline (T0), interproximal area (IA), interproximal emergence angle of the implant crown (A°) and manual dexterity (evaluated with Purdue Pegboard) have been recorded. At 14 days (T1), the inter-dental cleaning devices have been inverted between groups. After 14 days (T2), the Plaque Index (PI) and Gingival Index (GI) have been recorded. A questionnaire has been submitted to a patient for the analysis of preferences at T0, T1 and T2. RESULTS: Both inter-dental cleaning devices were effective in reducing PI and GI in the inter-dental area after 14 days of use. GI reduction was influenced by manual dexterity of the dominant hand. No significant differences were found for PI and GI at the variation of IA and A°. CONCLUSION: IDB was the most effective method for inter-dental plaque removal in all subjects regardless of their manual dexterity. DF seems to be more effective than IDB only in subjects with good dexterity.

Epidemiological aspects of dental trauma associated with maxillofacial injures: Ten years of clinical experience in Trieste, Italy.

BACKGROUND/AIMS: The prevalence of dental injuries in patients with facial fractures is relevant. Epidemiologically, dental trauma in association with facial fractures generally affects the age group between 20 and 40 years old, with a higher prevalence in males. The aim of this retrospective study was to identify the incidence and etiology of dental trauma associated with facial fractures over a 10-year period. METHODS: From January 2009 to April 2019, among 381 patients with facial fractures, 353 were included in this study. Age, gender, trauma etiology, injured teeth and dental treatment were investigated. RESULTS: From 353 patients, with a mean age of 49.7 ± 19.9 years, 247 (70%) were males and 106 (30%) were females. Accidental falls were the most common type of injury (n = 118, 33.4%), followed by road accidents (n = 90, 25.5%), assaults (n = 60, 17%) and sports trauma (n = 37, 10.5%). Fifty-five subjects (15.60%) had dental injuries associated with facial fractures. Of the 145 teeth involved, 48 (33.1%) were diagnosed with luxation, 22 teeth (15.2%) were avulsed, 11 teeth (7.5%) suffered a concussion and there were 10 (6.8%) alveolar wall fractures.Uncomplicated enamel-dentin fracture was the more frequent hard tissue injury (n = 21, 14.5%), followed by complicated crown-root fracture (n = 10, 6.9%), infraction (n = 8, 5.5%), enamel fracture (n = 3, 2%) and complicated enamel-dentin fracture (n = 3, 2%). There was a peak in incidence between 21 and 40 years (42%). Males had a significantly higher risk of facial fractures with dental injury (75%). Maxillary incisors and canines (62.8%) were the most affected teeth. CONCLUSIONS: There was a high prevalence of dental injuries associated with facial fractures. Maxillary incisors were the most injured teeth, with a higher prevalence in males.

Mandibular metastasis of pulmonary adenocarcinoma: How unexpected could it be?

OBJECTIVE: Metastatic tumours of bone must be considered in all patients with unexplained bone pain and particularly in patients who present with a known cancer, localised pain at multiple sites, and radiographic findings suggestive of metastasis. The purpose of this report was to present a case of a pathological fracture of the mandible as a consequence of metastatic pulmonary adenocarcinoma. MATERIALS AND METHODS: In July 2018 a 68-year-old male patient was hospitalised because of pulmonary adenocarcinoma and attended our department for an oral maxillo-facial evaluation. He complained of pain and swelling in the right temporomandibular region resulting in a reported functional limitation. An Orthopantomogram (OPG) demonstrated a right intracapsular condylar compound fracture associated with an osteolytic lesion at the condyle base with jagged margins. Subsequently, a CT scan with contrast of the maxillo-facial complex and a fine-needle aspiration of the lesion was performed. RESULTS: CT images showed the presence of a right mandibular condyle fracture associated with a large osteolytic lesion which confirmed the pathological nature of the fracture. Fine-needle aspiration of the lesion confirmed its metastatic nature. It was not possible to proceed with a mandibular resection due to the critical clinical condition of the patient who died in September 2018. CONCLUSION: Lung cancer frequently produces lytic-type metastasis, sometimes even in the jaw. In patients with an established diagnosis of lung cancer, any radiolucent lesion of the jaw or an unexplained painful symptomatology to the oro-maxillo facial complex should be placed in differential diagnosis with metastasis of the primary tumour.

Efficacy of two dosages of dexamethasone administered by submucosal injection on postoperative sequelae after third molar surgery: A retrospective study.

PURPOSE: A retrospective clinical study was performed to compare the post-operative sequelae of the submucosal administration of two different low dosages of dexamethasone, after the surgical extraction of lower third molars. METHODS: Data regarding edema, trismus, pain and analgesic consumption were collected from 150 subjects, selecting three equal groups (n= 50): a control group with no administered dexamethasone (G1); submucosal injection of dexamethasone 2 mg/0.5 ml (G2) and submucosal injection of dexamethasone 4 mg/1 ml (G3). Collected data were evaluated at three different time points: T0 before surgery, T1 on the third day after surgery and T2 on the 7th day after surgery. Patients' gender and age were also considered for statistical purposes. RESULTS: The effects on facial swelling reduction were statistically significant in G2 at T1 in the male subgroup. With trismus, the differences between the time points considered were statistically significant in G2 in the subgroup of subjects younger than 25 years old. Differences in analgesics taken were statistically significant when G1 and G2 were compared at T1. CLINICAL SIGNIFICANCE: The submucosal injection of 2 mg/0.5 ml of dexamethasone to subjects younger than 25 years old is enough to reduce trismus. For females and subjects older than 25 years old, it is preferable to administer at least 4 mg of dexamethasone to reduce edema.

Surgical extrusion: A dental technique.

This article describes a technique for surgically extruding severely compromised roots needing prosthetic rehabilitation. Unlike previously described approaches, the technique does not require advanced clinical skills or equipment, may reduce the risk of tooth or bone fracture during the luxation maneuvers, and does not seem to interfere with the alveolar socket healing process.

Should we fear direct oral anticoagulants more than vitamin K antagonists in simple single tooth extraction? A prospective comparative study.

OBJECTIVES: The aim of this prospective comparative clinical study was to evaluate the effect of oral anticoagulants on peri- and post-operative bleeding during simple single tooth extractions, comparing patients in treatment with vitamin K antagonists (VKAs) and patients assuming direct oral anticoagulants (DOACs). MATERIALS AND METHODS: Patients under oral anticoagulant therapy needing dental extraction were eligible for entering the study; patients were enrolled following inclusion and exclusion criteria and divided into VKAs and DOAC group according to the anticoagulation therapy. Included patients underwent a simple single dental extraction with elevators and forceps with a maximum surgical time of 15 minutes, without anticoagulation therapy discontinuation. All participants were assessed pre-operatively, during surgery, 30 min minutes and 7 days after surgery. Biological complications were registered and post-extraction bleeding was clinically defined according to Iwabuchi classification. Parametric and non-parametric tests were used to evaluate the variables between the groups. RESULTS: Sixty-five patients per group were enrolled and 130 teeth were extracted. The two groups were comparable for pre-, peri-, and post-operative variables. Only 1 patient of DOAC group and 2 patients for VKA group needed medical evaluation for post-extractive bleeding. No statistically significant difference resulted in post-operative bleeding events between the groups (p = 0.425). CONCLUSIONS: DOAC and VKA patients showed the same incidence of bleeding complications after simple single tooth extraction. Bleeding events were not statistically significant and not clinically relevant. CLINICAL RELEVANCE: Patients assuming DOACs can be treated similarly to patients in VKAs therapy with INR index between 2 and 3. Non-ceasing of DOAC therapy seems to be appropriate for simple single dental extractions.

Biofilms Developed on Dental Implant Titanium Surfaces with Different Roughness: Comparison Between In Vitro and In Vivo Studies.

Microbial biofilms developed on dental implants play a major role in perimplantitis' pathogenesis. Many studies have indicated that surface roughness is the main feature favoring biofilm development in vitro, but its actual influence in vivo has still to be confirmed. In this study, the amount of biofilm formed on differently treated titanium surfaces, showing distinct roughness, has been examined both in vivo and in vitro by Confocal Laser Scanning Microscopy. In vitro studies availed of biofilm developed by Pseudomonas aeruginosa or by salivary bacteria from volunteer donors. In vivo biofilm production was obtained by exposing titanium discs to the oral cavity of healthy volunteers. In vitro experiments showed that P. aeruginosa and, to a lesser extent, salivary bacteria produce more biomass and develop thicker biofilms on laser-treated and sandblasted titanium surfaces with respect to machined ones. In vivo experiments confirmed that bacterial colonization starts on sites of surface unevenness, but failed to disclose biomass differences among biofilms formed on surfaces with different roughness. Our study revealed that biofilm developed in vitro is more easily influenced by surface features than biofilm formed by complex communities in the mouth, where the cooperation of a variety of bacterial species and the presence of a wide range of nutrients and conditions allow bacteria to optimize substrate colonization. Therefore, quantitative differences observed in vitro among surfaces with different characteristics may not be predictive of different colonization rates in vivo.

Managing patients taking novel oral anticoagulants (NOAs) in dentistry: a discussion paper on clinical implications.

BACKGROUND: The aim of this paper is to contribute to the discussion on how to approach patients taking new orally administered anticoagulants (NOAs) dabigatran etexilate (a direct thrombin inhibitor), rivaroxaban and apixaban (factor Xa inhibitors), before, during and after dental treatment in light of the more recent knowledges. DISCUSSION: In dentistry and oral surgery, the major concerns in treatment of patients taking direct thrombin inhibitors and factor Xa inhibitors is the risk of haemorrhage and the absence of a specific reversal agent. The degree of renal function, the complexity of the surgical procedure and the patient's risk of bleeding due to other concomitant causes, are the most important factors to consider during surgical dental treatment of patients taking NOAs. For patients requiring simple dental extraction or minor oral surgery procedures, interruption of NOA is not generally necessary, while an higher control of bleeding and discontinuation of the drug (at least 24 h) should be requested before invasive surgical procedures, depending on renal functionality. The clinician has to consider that the number of patients taking NOAs is rapidly increasing. Since available data are not sufficient to establish an evidence-based dental management, the dentist must use caution and attention when treating patients taking dabigatran, rivaroxaban and apixaban.

An evaluation of clinical, radiological and three-dimensional dental tomography findings in ectodermal dysplasia cases.

BACKGROUND: This study aimed to review the results related to head and jaw disorders in cases of ectodermal dysplasia. The evaluation of ectodermal dysplasia cases was made by clinical examination and examination of the jaw and facial areas radiologically and on cone-beam 3-dimensional dental tomography (CBCT) images. MATERIAL AND METHODS: In the 36 cases evaluated in the study, typical clinical findings of pure hypohidrotic ectodermal displasia (HED) were seen, such as missing teeth, dry skin, hair and nail disorders. CBCT images were obtained from 12 of the 36 cases, aged 1.5- 45 years, and orthodontic analyses were made on these images. RESULTS: The clinical and radiological evaluations determined, hypodontia or oligodontia, breathing problems, sweating problems, a history of fever, sparse hair, saddle nose, skin peeling, hypopigmentation, hyperpigmentation, finger and nail deformities, conical teeth anomalies, abnormal tooth root formation, tooth resorption in the root, gingivitis, history of epilepsy, absent lachrymal canals and vision problems in the cases which included to the study. CONCLUSIONS: Ectodermal dysplasia cases have a particular place in dentistry and require a professional, multi-disciplinary approach in respect of the chewing function, orthognathic problems, growth, oral and dental health. It has been understood that with data obtained from modern technologies such as three-dimensional dental tomography and the treatments applied, the quality of life of these cases can be improved.

Mechanical and fatigue resistance of restorations supported by welded-framework and realized using computer-aided designed prosthetic shells: In vitro pilot study.

Resin coating in implants rehabilitation cannot always be aesthetic, durable and comfortable for the patient mainly due to the limited dimensions of the final structure. Intraoral welding technique and computer-aided designed prosthetic shells may be a solution. This in vitro study evaluates the capacity of load and the weakest point of implant-supported provisional prosthesis using welded titanium framework. Twelve samples were produced to simulate an implant supported fixed prosthetic bridge. Two implants (Ankylos; Dentsply Sirona Implants; Germany) were inserted inside blocks of nanoceramic material produced with a stereolithographic 3D printer. A polymethylmethacrylate (PMMA) resin shell was performed with CAD/CAM and relined on welded framework. Six samples were produced with the same procedure reducing resin thickness. The samples were subjected to fatigue test (6,500,000 cycles) using ElectroForce 3310 fatigue machine (t1); subsequently a mechanical compression test using a universal Shimadzu AGS-X 10 machine (t2). The samples were analyzed with a photographic and radiographic documentation at t0, t1 and t2. The samples survived mechanical fatigue test without evidence of failure. The radiographic and photographic evaluation revealed the fracture of resin coating after the mechanical compression test. The samples with minimal resin thickness fractured first. Adequate assessment of the resin thickness is mandatory to improve the longevity of these rehabilitations. CAD-CAM digital prosthetic design allows us to optimize the thicknesses and the prosthetic shapes, allowing us to obtain good degrees of resistance even in the presence of reduced prosthetic spaces.

Primary Stability of Implants Inserted into Polyurethane Blocks: Micro-CT and Analysis In Vitro.

The approach employed for the site preparation of the dental implant is a variable factor that affects the implant's primary stability and its ability to integrate with the surrounding bone. The main objective of this in vitro study is to evaluate the influence of different techniques used to prepare the implant site on the primary stability of the implant in two different densities of artificial bone. MATERIALS AND METHODS: A total of 150 implant sites were prepared in rigid polyurethane blocks to simulate two distinct bone densities of 15 pounds per cubic foot (PCF) and 30 PCF, with a 1-mm-thick simulated cortex. The implant sites were equally distributed among piezoelectric surgery (PES), traditional drills (TD), and black ruby magnetic mallet inserts (MM). Two methods have been employed to evaluate the implant's primary stability, Osstell and micro-tomography. RESULTS: In the present study, we observed significant variations in the implant stability quotient (ISQ) values. More precisely, our findings indicate that the ISQ values were generally higher for 30 PCF compared to 15 PCF. In terms of the preparation technique, PES exhibited the greatest ISQ values, followed by MM, and finally TD. These findings corresponded for both bone densities of 30 PCF (PES 75.6 ± 1.73, MM 69.8 ± 1.91, and TD 65.8 ± 1.91) and 15 PCF (PES 72.3 ± 1.63, MM 62.4 ± 1.77, and TD 60.6 ± 1.81). By utilizing Micro-CT scans, we were able to determine the ratio of the implant occupation to the preparation site. Furthermore, we could calculate the maximum distance between the implant and the wall of the preparation site. The findings demonstrated that PES had a higher ratio of implant to preparation site occupation, followed by TD, and then the MM, at a bone density of 30 PCF (PES 96 ± 1.95, TD 94 ± 1.88, and MM 90.3 ± 2.11). Nevertheless, there were no statistically significant differences in the occupation ratio among these three approaches in the bone density of 15 PCF (PES 89.6 ± 1.22, TD 90 ± 1.31, and MM 88.4 ± 1.17). Regarding the maximum gap between the implant and the site preparation, the smallest gaps were seen when TD were used, followed by MM, and finally by PES, either in a bone density 15 PCF (PES 318 ± 21, TD 238 ± 17, and MM 301 ± 20 µm) or in a bone density 30 PCF (PES 299 ± 20, TD 221 ± 16, and MM 281 ± 19 µm). A statistical analysis using ANOVA revealed these differences to be significant, with p-values of < 0.05. CONCLUSION: The outcomes of this study indicate that employing the PES technique and osteo-densification with MM during implant insertion may enhance the primary stability and increase the possibility of early implant loading.

Considering the Value of 3D Cultures for Enhancing the Understanding of Adhesion, Proliferation, and Osteogenesis on Titanium Dental Implants.

BACKGROUND: Individuals with pathologic conditions and restorative deficiencies might benefit from a combinatorial approach encompassing stem cells and dental implants; however, due to the various surface textures and coatings, the influence of titanium dental implants on cells exhibits extensive, wide variations. Three-dimensional (3D) cultures of stem cells on whole dental implants are superior in testing implant properties and were used to examine their capabilities thoroughly. MATERIALS AND METHODS: The surface micro-topography of five titanium dental implants manufactured by sandblasting with titanium, aluminum, corundum, or laser sintered and laser machined was compared in this study. After characterization, including particle size distribution and roughness, the adhesion, proliferation, and viability of adipose-derived stem cells (ADSCs) cultured on the whole-body implants were tested at three time points (one to seven days). Finally, the capacity of the implant to induce ADSCs' spontaneous osteoblastic differentiation was examined at the same time points, assessing the gene expression of collagen type 1 (coll-I), osteonectin (osn), alkaline phosphatase (alp), and osteocalcin (osc). RESULTS: Laser-treated (Laser Mach and Laser Sint) implants exhibited the highest adhesion degree; however, limited proliferation was observed, except for Laser Sint implants, while viability differences were seen throughout the three time points, except for Ti Blast implants. Sandblasted surfaces (Al Blast, Cor Blast, and Ti Blast) outpaced the laser-treated ones, inducing higher amounts of coll-I, osn, and alp, but not osc. Among the sandblasted surfaces, Ti Blast showed moderate roughness and the highest superficial texture density, favoring the most significant spontaneous differentiation relative to all the other implant surfaces. CONCLUSIONS: The results indicate that 3D cultures of stem cells on whole-body titanium dental implants is a practical and physiologically appropriate way to test the biological characteristics of the implants, revealing peculiar differences in ADSCs' adhesion, proliferation, and activity toward osteogenic commitment in the absence of specific osteoinductive cues. In addition, the 3D method would allow researchers to test various implant surfaces more thoroughly. Integrating with preconditioned stem cells would inspire a more substantial combinatorial approach to promote a quicker recovery for patients with restorative impairments.

Assessing the Efficacy of Whole-Body Titanium Dental Implant Surface Modifications in Inducing Adhesion, Proliferation, and Osteogenesis in Human Adipose Tissue Stem Cells.

BACKGROUND: Although the influence of titanium implants' micro-surface properties on titanium discs has been extensively investigated, the research has not taken into consideration their whole-body effect, which may be considered possible using a combinatorial approach. METHODS: Five titanium dental implants with a similar moderate roughness and different surface textures were thoroughly characterized. The cell adhesion and proliferation were assessed after adipose-tissue-derived stem cells (ADSCs) were seeded on whole-body implants. The implants' inductive properties were assessed by evaluating the osteoblastic gene expression. RESULTS: The surface micro-topography was analyzed, showing that hydroxyapatite (HA)-blasted and bland acid etching implants had the highest roughness and a lower number of surface particles. Cell adhesion was observed after 24 h on all the implants, with the highest score registered for the HA-blasted and bland acid etching implants. Cell proliferation was observed only on the laser-treated and double-acid-etched surfaces. The ADSCs expressed collagen type I, osteonectin, and alkaline phosphatase on all the implant surfaces, with high levels on the HA-treated surfaces, which also triggered osteocalcin expression on day seven. CONCLUSIONS: The findings of this study show that the morphology and treatment of whole titanium dental implants, primarily HA-treated and bland acid etching implants, impact the adherence and activity of ADSCs in osteogenic differentiation in the absence of specific osteo-inductive signals.

Influence of the anesthetic modality on the development of neurological injury after lower third molar extraction: A systematic review of the literature.

The aim of this study was to determine if the risk of neurological injury to the inferior alveolar nerve (IAN) and the lingual nerve (LN) following the extraction of lower third molars is affected by the anesthetic modality (local anesthesia (LA) vs. general anesthesia (GA)). A systematic search was performed through the PubMed, Scopus, Cochrane Library, and Web of Science databases; furthermore, a manual search was performed by analyzing the references of full-text articles. From a total of 309 studies (collected after the removal of duplicates), 6 studies were selected. Of these, 4 reported a correlation between GA and nerve damage, while the other 2 did not show an obvious association. The level of bias in the studies was also calculated. Only 2 studies showed a medium risk of bias, while 4 studies showed a high risk of bias; no study showed a low risk of bias. Four of the 6 studies highlighted a higher incidence of IAN and LN injury following the extractions performed under GA. Although no scientific evidence is yet available, due to the scarcity and the limited quality of the studies in the literature, considering the risk­benefit ratio, LA should be the first choice in lower third molar surgery.

Therapeutic Approach in the Treatment of Medication-Related Osteonecrosis of the Jaw: Case Series of 3 Patients and State of the Art on Surgical Strategies.

BACKGROUND: Bisphosphonates and receptor activator of nuclear factor kappa-B ligand inhibitors are currently the most widely used antiresorptive therapies in bone metabolism diseases treatment. Unfortunately they can evoke medication-related osteonecrosis of the jaws. The present case series study proposes to evaluate clinical features, evolution and the surgical therapeutic approaches in three patients affected by medication-related osteonecrosis of the jaw and to review the state of art regarding the management of this complication in light of the most recent literature. METHODS: Three cases of medication-related osteonecrosis of the jaws are discussed, two related to bisphosphonates therapy (ibandronic acid) and one due to denosumab. RESULTS: All three patients were aged female and had probably a dental trigger agent. The lesions located in posterior mandible were treated in one case with the surgical approach alone and, in the other case, with surgical approach associated with Erb-YAG laser. The lesion related to denosumab was treated with surgical approach and platelet rich fibrin application. A complete healing was always achieved. CONCLUSIONS: Dentists should be aware of the potential risk of developing medication-related osteonecrosis of the jaws for patients who take or had taken antiresorptive drugs. The side effects of denosumab and bisphosphonates are partly overlapping and currently there is still no consensus about the therapeutic surgical options. Prevention and early detection of the lesions should be the primary strategy.

In vitro study on conditioned dental root surfaces: evaluation of wettability, smear layer, and blood clot adhesion.

OBJECTIVES: The aim was to investigate the efficacy of citric acid and ethylenediaminetetraacetic acid (EDTA)-based treatments on smear layer removal and blood clot formation and stabilization. METHOD AND MATERIALS: After scaling and root planing, 126 root samples were divided into seven groups treated with: deionized water; saline; citric acid solution; Ultradent Citric Acid gel; EDTA solution; EDTA-based PrefGel; or untreated. Each group was divided into three subgroups: I for the evaluation of smear layer removal and surface wettability, II and III for the evaluation of blood clot formation and stabilization in static or dynamic rinsing conditions. RESULTS: Conditioning agent treatments increased surface wettability with respect to untreated samples (Ultradent: 45 ± 1 degrees, P = 6.2 × 10-3; EDTA: 36 ± 5 degrees, P = 8.9 × 10-7; PrefGel: 47 ± 7 degrees, P = 3.2 × 10-2). Smear layer removal (30% to 60% with respect to untreated samples) was observed for all the conditioning agents. Clot was absent on untreated samples and samples treated with deionized water. Clot quality was significantly higher for samples treated with conditioning agents (P < .05) and similar between group II and III (P > .05). A statistically significant difference (P = .027) was observed for clot coverage of the saline group, comparing static and dynamic rinsing, confirming the positive effect of treatments on clot stabilization. CONCLUSIONS: The use of conditioning agents improves smear layer removal and clot formation and stabilization with respect to scaling and root planing procedure only, which is, however, considered an essential procedure to promote wound healing in periodontal surgery.

CBCT Radiological Features as Predictors of Nerve Injuries in Third Molar Extractions: Multicenter Prospective Study on a Northeastern Italian Population.

BACKGROUND: Neurological alterations are one of the main complications occurring after the third molar extractions. The aim of this prospective multicenter cohort study was to find out Cone Beam Computed Tomography (CBCT) features and distribution of neurological complications in patients undergoing lower third molar surgery and to determine the radiological and patient-related factors that could be correlated to the occurrence of inferior alveolar and lingual nerves injury. MATERIAL AND METHODS: 378 patients who underwent lower third molar extraction from March 2018 to March 2019 were included. Clinical and radiological data were collected. CBCT features were recorded following Maglione et al. classification. Symptoms and characteristics of patients who experienced neurological alterations were evaluated. RESULTS: 193 patients needed a second-level radiological exam (CBCT). In these patients, the most common feature was Maglione class 3: a higher frequency of apical or buccal mandibular canals in direct contact with the tooth was observed. 3.17% of the patients developed a neurological complication. Maglione class 4, increased age, and operative time were all positively correlated with neurological alterations. CONCLUSIONS: while the buccal or apical position of the mandibular canal was the more common findings, the lingual position was found to have a higher correlation with a negative outcome. Age and operative time were also found to be risk factors for developing nerve injury in the considered population.

Ultrasonic Instrument Effects on Different Implant Surfaces: Profilometry, Energy-Dispersive X-ray Spectroscopy, and Microbiology In Vitro Study.

PURPOSE: To assess the effects of grade IV titanium ultrasonic tip instrumentation on different grade IV titanium implant surfaces and compare the decontamination of different implant surfaces using chlorhexidine, blue laser, or ozone. MATERIALS AND METHODS: Profilometry and energy-dispersive x-ray spectroscopy (EDS) analyses were performed on smooth, laser-micropatterned, and sandblasted grade IV titanium sample disks before (t0) and after (t1) ultrasonic instrumentation with an ultrasonic grade IV titanium tip. Samples were also incubated with a Streptococcus sanguinis culture. Each surface type was then treated with chlorhexidine, blue laser, or ozone (three test groups + control group). Scanning electron microscopy (SEM) images were taken after bacterial growth and after decontamination. RESULTS: After ultrasonic instrumentation, surface roughness (Ra) decreased on sandblasted and micropatterned surfaces, whereas it remained substantially unvaried on the smooth surface. SEM images revealed that the laser-micropatterned structure remained substantially unvaried after instrumentation. EDS revealed a minimal quantity of carbon and iron, found in the laser-treated and sandblasted group at t0. A minimal quantity of aluminum and oxygen was found on the sandblasted surface at t0 and t1. Ozone therapy achieved the highest decontaminating effect, regardless of implant surface topography. CONCLUSION: Among the alternative therapies to ultrasonic instrumentation with titanium tips, ozone appears to be effective regardless of the type of implant surface; it can be used for the decontamination treatment of implants without altering the surface structure.

Outcome of Different Surgical Approaches in the Treatment of Class II Furcation Defects in Mandibular Molars: A Randomized Clinical Trial.

The aim of this study was to investigate which factors play a major role in the healing of Class II mandibular furcation defects treated with different surgical techniques. Twenty-five systemically healthy subjects with periodontitis stage III grade B and Class II buccal mandibular furcation involvement received one of the following open flap debridement approaches: Group 1 (n = 10), no further treatment; Group 2 (n = 10), piezoelectric contouring of the furcation roof; Group 3 (n = 9), piezoelectric contouring of the furcation roof and bone grafting; Group 4 (n = 10), piezoelectric contouring of the furcation roof and bone grafting with coronally positioned flap. Clinical and radiologic variables-bleeding on probing, probing depth (PPD), vertical and horizontal bone level (CAL and PH), gingival recession, root trunk length, radicular separation, and furcation perimeter (FP)-were evaluated at baseline and 180 days and 1 year after surgery. All clinical parameters were statistically analyzed. Surgical techniques caused clinical (CAL, PPD, PH) and radiographic (FP) improvements. Regenerative techniques and the coronally positioned flap yielded a major radiographic reduction of furcation areas. All therapies resulted in significant horizontal and vertical PPD reduction and CAL gain.