RESUMO
For nearly 50 years, the vision of using single molecules in circuits has been seen as providing the ultimate miniaturization of electronic chips. An advanced example of such a molecular electronics chip is presented here, with the important distinction that the molecular circuit elements play the role of general-purpose single-molecule sensors. The device consists of a semiconductor chip with a scalable array architecture. Each array element contains a synthetic molecular wire assembled to span nanoelectrodes in a current monitoring circuit. A central conjugation site is used to attach a single probe molecule that defines the target of the sensor. The chip digitizes the resulting picoamp-scale current-versus-time readout from each sensor element of the array at a rate of 1,000 frames per second. This provides detailed electrical signatures of the single-molecule interactions between the probe and targets present in a solution-phase test sample. This platform is used to measure the interaction kinetics of single molecules, without the use of labels, in a massively parallel fashion. To demonstrate broad applicability, examples are shown for probe molecule binding, including DNA oligos, aptamers, antibodies, and antigens, and the activity of enzymes relevant to diagnostics and sequencing, including a CRISPR/Cas enzyme binding a target DNA, and a DNA polymerase enzyme incorporating nucleotides as it copies a DNA template. All of these applications are accomplished with high sensitivity and resolution, on a manufacturable, scalable, all-electronic semiconductor chip device, thereby bringing the power of modern chips to these diverse areas of biosensing.
Assuntos
Técnicas Biossensoriais/instrumentação , Eletrônica/instrumentação , Ensaios Enzimáticos/instrumentação , Análise de Sequência com Séries de Oligonucleotídeos/instrumentação , DNA , Desenho de Equipamento/instrumentação , Cinética , Dispositivos Lab-On-A-Chip , Miniaturização/instrumentação , Nanotecnologia/instrumentação , SemicondutoresRESUMO
Four decades after the first (and only) reported synthesis of kekulene, this emblematic cycloarene has been obtained again through an improved route involving the construction of a key synthetic intermediate, 5,6,8,9-tetrahydrobenzo[m]tetraphene, by means of a double Diels-Alder reaction between styrene and a versatile benzodiyne synthon. Ultra-high-resolution AFM imaging of single molecules of kekulene and computational calculations provide additional support for a molecular structure with a significant degree of bond localization in accordance with the resonance structure predicted by the Clar model.
RESUMO
The synthesis of a threefold symmetric nanographene with 19 cata-fused benzene rings distributed within six branches is reported. This flat dendritic starphene, which is the largest unsubstituted cata-condensed PAH that has been obtained to date, was prepared in solution by means of a palladium-catalyzed aryne cyclotrimerization reaction and it was characterized on surface by scanning probe microscopy with atomic resolution.
RESUMO
Using scanning probe microscopy techniques, at low temperatures and in ultrahigh vacuum, individual molecules adsorbed on surfaces can be probed with ultrahigh resolution to determine their structure and details of their conformation, configuration, charge states, aromaticity, and the contributions of resonance structures. Functionalizing the tip of an atomic force microscope with a CO molecule enabled atomic-resolution imaging of single molecules, and measurement of their adsorption geometry and bond-order relations. In addition, by using scanning tunneling microscopy and Kelvin probe force microscopy, the density of the molecular frontier orbitals and the electric charge distribution within molecules can be mapped. Combining these techniques yields a high-resolution tool for the identification and characterization of individual molecules. The single-molecule sensitivity and the possibility of atom manipulation to induce chemical reactions with the tip of the microscope open up unique applications in chemistry, and differentiate scanning probe microscopy from conventional methods for molecular structure elucidation. Besides being an aid for challenging cases in natural product identification, atomic force microscopy has been shown to be a powerful tool for the investigation of on-surface reactions and the characterization of radicals and molecular mixtures. Herein we review the progress that high-resolution scanning probe microscopy with functionalized tips has made for molecular structure identification and characterization, and discuss the challenges it will face in the years to come.
RESUMO
Rearrangements that change the connectivity of a carbon skeleton are often useful in synthesis, but it can be difficult to follow their mechanisms. Scanning probe microscopy can be used to manipulate a skeletal rearrangement at the single-molecule level, while monitoring the geometry of reactants, intermediates and final products with atomic resolution. We studied the reductive rearrangement of 1,1-dibromo alkenes to polyynes on a NaCl surface at 5 K, a reaction that resembles the Fritsch-Buttenberg-Wiechell rearrangement. Voltage pulses were used to cleave one C-Br bond, forming a radical, then to cleave the remaining Câ¢-Br bond, triggering the rearrangement. These experiments provide structural insight into the bromo-vinyl radical intermediates, showing that the C=Câ¢-Br unit is nonlinear. Long polyynes, up to the octayne Ph-(C≡C)8-Ph, have been prepared in this way. The control of skeletal rearrangements opens a new window on carbon-rich materials and extends the toolbox for molecular synthesis by atom manipulation.
RESUMO
Antiaromatic and open-shell molecules are attractive because of their distinct electronic and magnetic behaviour. However, their increased reactivity creates a challenge for probing their properties. Here, we describe the on-surface and in-solution generation and characterisation of a highly reactive antiaromatic molecule: indeno[1,2-b]fluorene (IF). In solution, we generated IF by KI-induced dehalogenation of a dibromo-substituted precursor molecule and found that IF survives for minutes at ambient conditions. Using atom manipulation at low temperatures we generated IF on Cu(111) and on bilayer NaCl. On these surfaces, we characterised IF by bond-order analysis using non-contact atomic force microscopy with CO-functionalised tips and by orbital imaging using scanning tunnelling microscopy. We found that the closed-shell configuration and antiaromatic character predicted for gas-phase IF are preserved on the NaCl film. On Cu(111), we observed significant bond-order reorganisation within the s-indacene moiety because of chemisorption, highlighting the importance of molecule surface interactions on the π-electron distribution.
RESUMO
Triangulene, the smallest triplet-ground-state polybenzenoid (also known as Clar's hydrocarbon), has been an enigmatic molecule ever since its existence was first hypothesized. Despite containing an even number of carbons (22, in six fused benzene rings), it is not possible to draw Kekulé-style resonant structures for the whole molecule: any attempt results in two unpaired valence electrons. Synthesis and characterization of unsubstituted triangulene has not been achieved because of its extreme reactivity, although the addition of substituents has allowed the stabilization and synthesis of the triangulene core and verification of the triplet ground state via electron paramagnetic resonance measurements. Here we show the on-surface generation of unsubstituted triangulene that consists of six fused benzene rings. The tip of a combined scanning tunnelling and atomic force microscope (STM/AFM) was used to dehydrogenate precursor molecules. STM measurements in combination with density functional theory (DFT) calculations confirmed that triangulene keeps its free-molecule properties on the surface, whereas AFM measurements resolved its planar, threefold symmetric molecular structure. The unique topology of such non-Kekulé hydrocarbons results in open-shell π-conjugated graphene fragments that give rise to high-spin ground states, potentially useful in organic spintronic devices. Our generation method renders manifold experiments possible to investigate triangulene and related open-shell fragments at the single-molecule level.
RESUMO
We describe the generation of a meta-aryne at low temperature (T = 5 K) using atomic manipulation on Cu(111) and on bilayer NaCl on Cu(111). We observe different voltage thresholds for dehalogenation of the precursor and different reaction products depending on the substrate surface. The chemical structure is resolved by atomic force microscopy with CO-terminated tips, revealing the radical positions and confirming a diradical rather than an anti-Bredt olefin structure for this meta-aryne on NaCl.
RESUMO
Aiming to study new motifs, potentially active as functional materials, we performed the synthesis of a naphthodiazaborinine (the BN isostere of the phenalenyl anion) that is bonded to a hindered di-ortho-substituted aryl system (9-anthracene). We used atomic force microscopy (AFM) and succeeded in both the verification of the original nonplanar structure of the molecule and the planarization of the skeleton by removing H atoms that cause steric hindrance. This study demonstrated that planarization by atomic manipulation is a possible route for extending molecular identification by AFM to nonplanar molecular systems that are difficult to probe with AFM directly.
RESUMO
We investigated single-layer graphene on SiC(0001) by atomic force and tunneling current microscopy, to separate the topographic and electronic contributions from the overall landscape. The analysis revealed that the roughness evaluated from the atomic force maps is very low, in accord with theoretical simulations. We also observed that characteristic electron scattering effects on graphene edges and defects are not accompanied by any out-of-plane relaxations of carbon atoms.
RESUMO
In this paper we present a comparison of three different methods that can be used for estimating the stiffness of qPlus sensors. The first method is based on continuum theory of elasticity. The second (Cleveland's method) uses the change in the eigenfrequency that is induced by the loading of small masses. Finally, the stiffness is obtained by analysis of the thermal noise spectrum. We show that all three methods give very similar results. Surprisingly, neither the gold wire nor the gluing give rise to significant changes of the stiffness in the case of our home-built sensors. Furthermore we describe a fast and cost-effective way to perform Cleveland's method. This method is based on gluing small pieces of a tungsten wire; the mass is obtained from the volume of the wire, which is measured by optical microscopy. To facilitate detection of oscillation eigenfrequencies under ambient conditions, we designed and built a device for testing qPlus sensors.
RESUMO
In this paper, we show that simultaneous noncontact atomic force microscopy (nc-AFM) and scanning tunneling microscopy (STM) is a powerful tool for molecular discrimination on the Si(111)-7 × 7 surface, even at room temperature. Using density functional theory modeling, we justify this approach and show that the force response allows us to distinguish straightforwardly between molecular adsorbates and common defects, such as vacancies. Finally, we prove that STM/nc-AFM method is able to determine attachment sites of molecules deposited on semiconductor surface at room temperature.
RESUMO
We present the results of simultaneous scanning-tunneling and frequency-modulated dynamic atomic force microscopy measurements with a qPlus setup. The qPlus sensor is a purely electrical sensor based on a quartz tuning fork. If both the tunneling current and the force signal are to be measured at the tip, a cross-talk of the tunneling current with the force signal can easily occur. The origin and general features of the capacitive cross-talk will be discussed in detail in this contribution. Furthermore, we describe an experimental setup that improves the level of decoupling between the tunneling-current and the deflection signal. The efficiency of this experimental setup is demonstrated through topography and site-specific force/tunneling-spectroscopy measurements on the Si(111) 7×7 surface. The results show an excellent agreement with previously reported data measured by optical interferometric deflection.
RESUMO
Chemical identification of individual atoms in mixed In-Sn chains grown on a Si(100)-(2 × 1) surface was investigated by means of room temperature dynamic noncontact AFM measurements and DFT calculations. We demonstrate that the chemical nature of each atom in the chain can be identified by means of measurements of the short-range forces acting between an AFM tip and the atom. On the basis of this method, we revealed incorporation of silicon atoms from the substrate into the metal chains. Analysis of the measured and calculated short-range forces indicates that even different chemical states of a single atom can be distinguished.