PEGylated solid lipid nanoparticles functionalized by aptamer for targeted delivery of docetaxel in mice bearing C26 tumor.

OBJECTIVE: Colorectal cancer is one of the most deadly cancers in the world. Docetaxel (DTX) is a potentially important chemotherapeutic agent for the treatment of cancer. Many studies have attempted to improve its bioavailability and efficiency using different nanoparticulate drug delivery systems. SIGNIFICANCE: In the current study, PEGylated solid lipid nanoparticles (SLNs) containing DTX were prepared and modified with AS1411 anti-nucleolin aptamers to target nucleoin receptors on colorectal cancer cells. METHODS: Nanoparticles were characterized and the morphology was evaluated. In vitro studies were investigated on murine colon carcinoma (C26) and Chinese hamster ovary (CHO) cell lines. Then in vivo antitumor efficacy and survival analysis were evaluated in mice bearing the C26 tumor model. RESULTS: Results showed 135-140 nm particle size and about 78% DTX entrapment efficiency for actively targeted samples. PEGylated and aptamer-targeted SLNs containing DTX had the lowest IC50 (0.28 and 0.11 nM for 3 and 6 h incubation respectively) and higher cellular uptake values in the C26 cell line. Also in vivo results demonstrated that PEGylated and aptamer-targeted SLNs containing Docetaxel (Apt-PEG-SLN-DTX) improved antitumor activity and inhibited tumor growth in C26 tumor-bearing mice. CONCLUSION: These results suggested that PEGylated and aptamer-targeted SLNs containing DTX exhibited efficient characteristics in tumor inhibitory against murine C26 carcinoma model.

An overview of polyallylamine applications in gene delivery.

A chief objective of gene transportation studies is to manipulate clinically accepted carriers that can be utilized to combat incurable diseases. Despite various strategies, efficiency and application of these vectors have been hindered, owing to different obstacles. Polyallylamine (PAA) is a synthetic water-soluble, weak base cationic polymer with different properties that could be administrated as an ideal candidate for biomedical applications such as gene delivery, drug delivery, or even tissue engineering. However, some intrinsic properties of this polymer limit its application. The two associated problems with the use of PAA in gene delivery are low transfection efficiency (because of low buffering capacity) and cytotoxic effects attributed to intense cationic character. Most of the strategies for structural modification of the PAA structure have focused on introducing hydrophobic groups to the polymeric backbone that target both cytotoxicity and transfection. In this perspective, we concentrate on PAA as a gene delivery vehicle and the existing approaches for modification of this cationic polymer to give insight to researchers for exploitation of PAA as an efficient carrier in biomedical applications.

Folate conjugation improved uptake and targeting of porous hydroxyapatite nanoparticles containing epirubicin to cancer cells.

As hydroxyapatite (HAp) with the hexagonal crystal structure is biocompatible and bioactive. In the present study, HAp nanoparticles were synthesized and functionalized with polyethylene glycol and folic acid. The anticancer drug, epirubicin, was loaded to the folic acid-conjugated polyethylene glycol-coated HAp (FA-PEG-HAp) nanoparticles. The prepared nanoparticles were used for in vitro and in vivo experiments. Particle size analyzer showed that the hydrodynamic size of PEG-HAp and FA-PEG-HAp nanoparticles was 150.3 ± 1.5 nm and 217.2 ± 14.9 nm, respectively. The release behavior of epirubicin from nanoparticles showed an increase in the rate of release in acidic pH. The released drug in acidic pH was 2.5 fold more than pH 7.4. The results of in vitro study indicated an increase in cellular uptake of nanoparticles due to folate ligand. In vivo treatment with both PEG-HAp and FA-PEG-HAp nanoparticles had notably higher inhibition efficacy towards tumor growth than free epirubicin. In conclusion, folate conjugation provided higher uptake and better targeting of hydroxyapatite nanoparticles to cancer cells.

Targeted-nanoliposomal combretastatin A4 (CA-4) as an efficient antivascular candidate in the metastatic cancer treatment.

A number of antiangiogenic drugs have been approved by the Food and Drug Administration which are used in cancer therapy, and variety of other agents in several stages of clinical development or in preclinical assessment. Among these, combretastatin A4 (CA-4) is an under-researched inhibitor of angiogenesis that shows potential activity in the treatment of advanced tumors with migration capacity. However, its clinical application has been limited due to poor water solubility, low bioavailability, rapid metabolism, and systemic elimination. During the last decade, numerous investigations have been done to overcome these problems by using different CA-4 delivery systems or developing produgs of CA-4 or its structural analogs. Nevertheless, these strategies could not be efficient out of the undesired side effects on normal tissues. Nanoliposomal CA-4 not only benefits from the advantage of using liposomal drugs as opposed to free drugs but also can accumulate in the tumor site via specific targeting ligands, which leads to efficient targeting and enhancement of bioavailability. To the best of our knowledge, we consider an important attempt to understand different factors that might influence the CA-4 loading and release pattern of liposomes and the consequent results in tumor therapy. In this review, we shed light on various studied liposomal CA-4 formulations showing application thereof in cancer treatment.

Enhanced gene delivery by polyethyleneimine coated mesoporous silica nanoparticles.

Due to large surface area, tunable pore size, easy surface manipulation, and low-toxicity mesoporous silica nanoparticles (MSNs) may act as a suitable vector for gene delivery. In order to make MSNs as a suitable gene delivery system, we modified the surface of phosphonated MSNs (PMSN) with polyethyleneimine (PEI) 10 and 25 KDa. Then nanoparticles were loaded with chloroquine (CQ) (a lysosomotropic agent) and complexed with plasmid DNA. The transfection efficiency and cytotoxicity of these nanoparticles was examined using green fluorescent protein plasmid (pGFP) and cytotoxicity assay. All PEI coated nanoparticles showed positive zeta potential and mean size was ranged between 170 and 215 nm with polydispersity index bellow 0.35. PEI-coated MSNs significiantly enhanced GFP gene expression in Neuro-2 A cells compared to PEI 10 and 25 KDa. The results of the cytotoxicity assays showed that these nanoparticles have an acceptable level of viability but CQ loaded nanoparticles showed higher cytotoxicity and lower transfection activity than CQ free nanoparticles.

Encapsulation challenges, the substantial issue in solid lipid nanoparticles characterization.

Solid lipid nanoparticles (SLNs), as alternative colloidal carriers, have been used for the sustained release of lipophilic drugs with poor water solubility. One of the most important parameters in the characterization of SLNs is entrapment efficiency (EE). Despite the importance of this factor in estimating the drug loading capacity, EE does not always represent the exact percentage of the entrapped drug. Several variables such as the stirring speed and duration, and concentration of surfactant, emulsifier, and drug play important roles in determining the final EE. In addition, EE is mainly affected by the type and concentration of the lipid. There are two major methods for the measurement of EE are in which the encapsulated drug in SLNs is either directly measured (direct method) or the amount of unencapsulated drug in the supernatant is measured (indirect method). Accuracy of drug analysis is the main challenge for EE calculation, and is either performed in the separated aqueous medium or the particles. In this review, we aimed to introduce the available methods for EE determination in SLNs and discuss the advantages and shortcomings of each method.

MUC1 aptamer-conjugated mesoporous silica nanoparticles effectively target breast cancer cells.

In the present study, we developed aptamer (Apt) conjugated mesoporous silica nanoparticles (MSNs) for specific delivery of epirubicin (EPI) to breast cancer cells. MSNs were synthesized and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTMS), followed by MUC1 aptamer conjugation through disulfide bonds. The nanoparticles were analyzed by transmission electron microscopy (TEM), particle size analyzer, zeta potential, elemental analysis (CHNS), aptamer conjugation efficiency, drug loading efficiency, and drug release profile. Cell uptake and in vitro cytotoxicity of different formulations were performed. The results of MSNs characterization confirmed spherical nanoparticles with thiol functional groups. Particle size of obtained nanoparticles was 163 nm in deionized water. After conjugation of MUC1 aptamer and EPI loading (MSN-MUC1-EPI), particle size increased to 258 nm. The aptamer conjugation to MSNs with disulfide bonds were confirmed using gel retardation assay. Cellular uptake studies revealed better cell uptake of MSN-MUC1-EPI compared to MSN-EPI. Moreover, cytotoxicity study results in MCF7 cell lines showed improved cytotoxicity of MSN-MUC1-EPI in comparison with MSN-EPI or EPI at the same concentration of drug. These results exhibited that MSN-MUC1-EPI has the potential for targeted drug delivery into MUC1 positive breast cancer cells to improve drug efficacy and alleviate side effects.

Synthesis, characterization and evaluation of transfection efficiency of dexamethasone conjugated poly(propyleneimine) nanocarriers for gene delivery#.

CONTEXT: Polypropylenimine (PPI), a cationic dendrimer with defined structure and positive surface charge, is a potent non-viral vector. Dexamethasone (Dexa) conveys to the nucleus through interaction with its intracellular receptor. OBJECTIVE: This study develops efficient and non-toxic gene carriers through conjugation of Dexa at various percentages (5, 10 and 20%) to the fourth and the fifth generation PPIs (PPIG4s and PPIG5s). MATERIALS AND METHODS: The 21-OH group of Dexa (0.536 mmol) was modified with methanesulfonyl chloride (0.644 mmol) to activate it (Dexa-mesylate), and then it was conjugated to PPIs using Traut's reagent. After dialysis (48 h) and lyophilization, the physicochemical characteristics of products (PPI-Dexa) including zeta potential, size, buffering capacity and DNA condensing capability were investigated and compared with unmodified PPIs. Moreover, the cytotoxicity and transfection activity of the Dexa-modified PPIs were assessed using Neuro2A cells. RESULTS: Transfection of PPIG4 was close to PEI 25 kDa. Although the addition of Dexa to PPIG4s did not improve their transfection, their cytotoxicity was improved; especially in the carrier to DNA weight ratios (C/P) of one and two. The Dexa conjugation to PPIG5s enhanced their transfection at C/P ratio of one in both 5% (1.3-fold) and 10% (1.6-fold) Dexa grafting, of which the best result was observed in PPIG5-Dexa 10% at C/P ratio of one. DISCUSSION AND CONCLUSIONS: The modification of PPIs with Dexa is a promising approach to improve their cytotoxicity and transfection. The higher optimization of physicochemical characteristics, the better cell transfection and toxicity will be achieved.

Magnetic silica nanocomposites for magnetic hyperthermia applications.

This article summarises nearly all magnetic silica nanocomposites that have been synthesised for biomedical applications and evaluated under alternating magnetic field (AMF) from the point of view of heat generation. The use of these nanocomposites as a drug delivery system for remote control of drug release via applying AMF is described. Different parameters that affect the magnetic properties and, therefore, affect the amount of generated heat and the fact that sometimes these parameters are in conflict with each other are discussed. This review article presents insight into the synthesis of nanocomposites with optimal characteristics and use of them in optimal conditions to achieve the optimal magnetic properties for magnetic hyperthermia.

Ciprofloxacin-imprinted hydrogels for drug sustained release in aqueous media.

In this study several ciprofloxacin (CFX) imprinted and non-imprinted hydrogels were prepared and evaluated as ocular drug delivery systems in aqueous media. 2-Hydroxyethyl methacrylate (HEMA) was used as a solvent and backbone monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linker, methacrylic acid (MAA) as a functional monomer and CFX as the template molecule. CFX-imprinted hydrogels (MIPs) were prepared applying different CFX:MAA molar ratios (1:16, 1:20 and 1:32) in feed composition of monomer solutions. Thermal polymerization was applied and hydrogels were synthesized in a polypropylene mold (0.4 mm thickness). Swelling and binding properties of hydrogels were evaluated in water. Release profile of the MIPs was evaluated in NaCl (0.9%) and artificial tears. The data showed that enhancing the MAA concentration, as a co-monomer, and using molecular imprinting improved binding properties of the synthesized hydrogels. The optimized MIPs with 400 mM MAA and CFX: MAA molar ratio of 1:20 and 1:16 showed the greatest affinity for CFX and the highest ability to control drug release. In vitro antibacterial activity of hydrogels was studied and demonstrated the effect of CFX-loaded hydrogels against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus) isolated from patients' eyes. This study indicated antibacterial efficacy of CFX-loaded MIP hydrogels.

The effect of nanoliposomal formulations on Staphylococcus epidermidis biofilm.

OBJECTIVE: The aim of the present study was to assess the in vitro antimicrobial activities of nanoliposomal formulations loaded with vancomycin or/and rifampin against the biofilm formed by Staphylococcus epidermidis at 37 °C under aerobic condition. MATERIALS AND METHODS: Liposomal formulations were prepared by dehydration-rehydration (DRV) method and characterized for size, zeta potential and encapsulation efficacy. The ability of different formulations on eradication of bacterial biofilm was assessed through optical density ratio (ODr) and the results implicate higher survival rates of S. epidermidis on biofilm. Positive control was defined as an ODr = 1.0. RESULTS: The zeta potential of anionic, cationic and PEGylated liposomes was -35 ± 2, 35 ± 1 and 27 ± 2 mV whereas the mean sizes of these liposomal formulations were 145 ± 4, 134 ± 1 and 142 ± 6 nm, respectively. Encapsulation efficacy of rifampin and vancomycin was more than 60% and about 25%, respectively. Cationic liposomal rifampin lowered the ODr to 0.61 and was the most effective formulations against S. epidermidis biofilm (p<0.001). The antibiofilm activity of liposomal formulations was concentration- and time-dependent manner. CONCLUSION: The results of this study showed that rifampin-loaded liposomes were effective against bacterial biofilm.

Effect of mesoporous silica nanoparticles on cell viability and markers of oxidative stress.

In the recent years, the use of mesoporous silica nanoparticles (MSNs) has been extended in biomedical fields such as cancer therapy, drug and gene delivery, biosensors, and enzyme immobilization. Although nanomaterials are currently being widely used in modern technology, there is a lack of information regarding to the health and environmental implications of manufactured nanomaterials. In the present study, the effects of MSNs and surface functionalized MSNs on cell viability, markers of oxidative damages (mainly intracellular reactive oxygen species (ROS) formation), and oxidative DNA damage were investigated in vitro in rat pheochromocytoma PC12 cells. Following exposure of these nanoparticles (1.95-1000 µg/mL) to PC12 cells for 12 and 24 h, no significant reduction of cell viability was observed compared with control. Moreover, ROS formation and oxidative DNA damage were not significantly changed by these nanoparticles even at high concentrations or prolong exposures. In conclusion, the results showed that neither MSNs nor functionalized MSNs exhibited any remarkable in vitro toxic properties in PC12 cells even at high concentration.

In-situ forming biodegradable implants for sustained Fluocinolone acetonide release to the posterior eye: In-vitro and in-vivo investigations in rabbits.

Delivering medication to the posterior segment of the eye presents a significant challenge. Intravitreal injection has emerged as the preferred method for drug delivery to this area. However, current injectable non-biodegradable implants for fluocinolone acetonide (FA) require surgical removal after prolonged drug release, potentially affecting patient compliance. This study aimed to develop an in-situ forming biodegradable implant (ISFBI) optimal formulation containing PLGA504H and PLGA756S (50:50 w/w%) with the additive NMP solvent. The goal was to achieve slow and controlled release of FA over a two-month period with lower burst release, following a single intravitreal injection. Through morphology, rheology, stability and in-vitro release evaluations, the optimal formulation demonstrated low viscosity (0.12-1.25 Pa. s) and sustained release of FA at a rate of 0.36 µg/day from the third day up to two months. Furthermore, histopathology and in-vivo studies were conducted after intravitreal injection of the optimal formulation in rabbits' eye. Pharmacokinetic analysis demonstrated mean residence time (MRT) of 20.02 ± 0.6 days, half-life (t1/2) of 18.80 ± 0.4 days, and clearance (Cl) of 0.29 ± 0.03 ml/h for FA in the vitreous humor, indicating sustained and slow absorption of FA by the targeted retinal tissue from vitrea over the two-month period and eliminating through the anterior section of the eye, as revealed by its presence in the aqueous humor. Additionally, FA exhibited no detection in the blood and no evidence of systemic side effects or damage on the retinal layer and other organs. Based on these findings, it can be concluded that in-situ forming injectable biodegradable PLGA implants can show promise as a long-acting and controlled-release system for intraocular drug delivery.

Assessment of cytotoxic properties of safranal and nanoliposomal safranal in various cancer cell lines.

Saffron (Crocus sativus) is a widely used food additive used for its color and taste. It has been reported that saffron possesses significant in vivo and in vitro anti-tumor activity. In the present study, anti-tumor effects of safranal, the major aromatic compound in saffron, and its liposomal form were investigated. The role of apoptosis has also been explored in this toxicity. HeLa, MCF7 and L929 cell lines were cultured and exposed to safranal (0.01-3 mM) or liposomal safranal (0.04-0.32 mM). 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium (MTT) assay was performed to assess cytotoxicity. Apoptosis was evaluated by staining cells with propidium iodide and quantifying sub-Gl peak by flow cytometry. MTT assay revealed a significant and concentration-dependent cytotoxic effect of safranal on HeLa and MCF7 cell lines. Liposomal safranal showed enhanced effect compared to the safranal solution, as compared by their IC50 concentrations. Flow cytometry results revealed induction of apoptosis by safranal. It might be concluded that safranal could be involved in saffron-induced cell death in HeLa and MCF7 cells. Liposome encapsulation improved anti-tumor effect of safranal. Safranal and particularly its liposomal form could be investigated as promising chemotherapeutic agents in cancer treatment.

High-efficient synthesis of carbon quantum dots from orange pericarp as fluorescence turn-on probes for Ca2+ and Zn2+ ion detection and their application in trypsin activity characterization.

Objectives: In this work, we propose an efficient preparation process for the synthesis of natural carbon quantum dots (NCQDs) by the usage of orange pericarp as the carbon natural resource, which is performed through hydrothermal treatment and top-down approaches. Materials and Methods: The structural, morphological, average size, and optical properties of synthesized NCQDs were investigated via dynamic light scattering (DLS), transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy (AFM), field emission scanning electron microscope (FESEM), energy dispersive x-ray spectroscopy (EDX), ultraviolet-visible spectroscopy (UV-Vis), and fluorescence PL spectra. Results: The shape of obtained NCQDs was observed to be spherical in the results of TEM analysis with an average size of 6-7 nm which confirms NCQDs essence. The signs of a strong peak (absorption) at around 282 nm throughout the UV-vis spectrum have been detected. The provided FTIR spectroscopy confirmed the existence of functional groups above the NCQDs surface. Furthermore, the surface charge of -11 mV through the obtained zeta potential regarding the synthesized NCQDs has been identified. MTT assay on mouse colon carcinoma cells (C26) demonstrated the lack of any signs of toxicity in NCQDs. Conclusion: The obtained NCQDs contain high photo-stability, excellent PL activity, and efficient fluorescent emission based on excitation. The results of kinetic studies revealed the ability of NCQDs to inhibit trypsin activity in a non-competitive model, which qualifies them as potent inhibitors and quenchers of trypsin. It can be suggested that the synthesized NCQDs have the potential of functioning as a sustainable and eco-friendly source for various applications such as sensors for detecting Ca2+ and Zn2+ and trypsin biosensor for determining enzyme activity.

Prolonged local delivery of doxorubicin to cancer cells using lipid liquid crystalline system.

Exploring efficient strategies to eradicate the tumor tissue and enhance patient outcomes still remained a serious challenge. Systemic toxicity of the current chemotherapeutics and their low concentration in the tumor site limited reaching a practical approach in their administration and combinational therapy. Besides, complicated delivery platforms could not receive the marketing approval due to difficulties in scale up procedures. To this aim, we developed a simple injectable local delivery platform which provided a sufficient dose of the chemotherapeutic in the cancerous tissue with sustained release properties. Herein, various injectable in situ forming LLC formulations loaded with doxorubicin (DOX) were developed. Although there were many previous studies on lipid liquid crystal (LLC) based formulations, their performance as an injectable intratumoral depot system for local chemotherapy has not been extensively investigated yet. In the current study we developed 18 formulations of DOX loaded LLCs using Box-Behnken method via different ratios of phosphatidyl choline: sorbitan monooleate (PC: SMO), N-Methyl-2-pyrrolidone (NMP), and tween 80. The physicochemical properties of the formulations were investigated and their in vivo tumor inhibition efficiencies in C26 tumor bearing mouse model was further studied. The results indicated that DOX loaded PC: SMO/NMP/Tween 80 (50:50/50/2 w/w%) and DOX loaded PC: SMO/NMP (50:50/50 w/w%) formulations were syringeable with pseudoplastic behavior. Also, they could release the cargo in a sustained manner for 60 days. Compared to intravascular administration of DOX, intratumoral injection of the developed formulations led to a significant decrease in tumor volume and enhancement of the survival rate in murine tumor model. Additionally, animal imaging studies proved their prolonged accumulation in the tumor site. Histopathological studies showed that treatment with the DOX-loaded LLC formulations did not cause any systemic toxicity to vital organs. Taken together, we believe that the developed simple and efficient local delivery platform can be further used in combinational therapies and treatment of various solid tumors.

Enhanced wound-healing efficacy of electrospun mesoporous hydroxyapatite nanoparticle-loaded chitosan nanofiber developed using pluronic F127.

One of the goals of wound repairing is to mimic the function and architecture of the native extracellular matrix (ECM). To this end, for the first time, we used pluronic F127 and mesoporous rod-like hydroxyapatite nanoparticles (mr-HAP NPs) simultaneously to prepare a novel low-diameter electrospun ECM-mimicking wound dressing based on a mixture of chitosan and polyethylene oxide. F127 is used as a surface tension regulator of the polymer solution. In addition, F127 has the special ability to reduce the size of nanofibers. mr-HAP NPs are used as cell proliferation accelerators which also improve the mechanical properties and water uptake capacity of the as-prepared dressing. The average size of nanofibers in the presence of F127 was about 110 nm which was more than 2.5 times lower than nanofibers prepared without F127. The water uptake capacity was evaluated to investigate the wound exudate absorption capacity of the wound dressing. It was observed that the incorporation of mr-HAP NPs into wound dressing structure increases the water uptake capacity by more than 2.5 times. Alongside the evaluation of cytocompatibility through in vitro cell viability assay, the wound healing efficacy was also determined in full-thickness skin wounds in a rat model for 15 days. The cytocompatible wound dressing showed significantly higher wound closure efficacy than the control group so the wounds healed entirely on the last day of the treatment period. As well, the pathology analysis proved better granulation tissue development and greater re-epithelialization. These findings are by virtue of the improved mechanical properties, accelerated cell migration and proliferation, proper environment for oxygen exchange, and enhanced exudate uptake of the wound dressing. These all are due to the presence of F127 and mr-HAP.

Selective Cellular Uptake and Cytotoxicity of Curcumin-encapsulated SPC and HSPC Liposome Nanoparticles on Human Bladder Cancer Cells.

BACKGROUND: Curcumin is a main bioactive constituent of turmeric (Curcuma longa L.) with pleiotropic health beneficial effects. However, poor bioavailability is the major barrier to the efficient pharmacological effects of curcumin in humans. AIMS: The present study aimed to develop liposome formulations based on soybean phosphatidylcholine (SPC) and hydrogenated SPC (HSPC) to enhance the bioavailability of curcumin in bladder cancer cells. METHODS: Curcumin was encapsulated in HSPC and SPC liposome nanoparticles using the solvent evaporation method. Physical properties, encapsulation efficiency (%), stability, and in vitro drug release of the prepared liposome formulations have been evaluated. The cellular uptake and cytotoxicity of curcumin-encapsulated nanoliposomes on bladder carcinoma HTB9 cell line and normal fibroblast L929 cell line were studied. DNA fragmentation, apoptosis, and genotoxicity assessments have been carried out to determine the molecular mechanisms underlying the cytotoxic effects of liposomal curcumin formulations on bladder cancer cells. RESULTS: The results indicated that curcumin could be efficiently encapsulated in the HSPC and SPC liposome formulations. The liposomal curcumin formulations have shown shelf-life stability for 14 weeks at 4°C. The accelerated stability testing showed that curcumin encapsulated in nanoliposomes was significantly (p < 0.001) more stable than free curcumin at various pH degrees ranging from alkaline to acidic pH. The in vitro drug release study showed curcumin to be sustainably released from the liposome nanoparticles. Of note, SPC and HSPC nanoliposome formulations significantly increased the cellular uptake and cytotoxicity of curcumin on bladder cancer HTB9 cells. Mechanistically, liposomal curcumin was found to exert a selective inhibitory effect on the viability of cancer cells by inducing apoptosis and DNA damage. CONCLUSION: In conclusion, SPC and HSPC liposome nanoparticles can significantly increase the stability and bioavailability of curcumin, which are important for improving its pharmacological effect.

Development of a pH-responsive imprinted polymer for diclofenac and study of its binding properties in organic and aqueous media.

Three different molecularly imprinted polymers (MIPs) for drug delivery of diclofenac in gastrointestinal tract were synthesized employing bulk polymerization method and their binding and release properties were studied in different pH values. Methacrylic acid (MAA), methacrylamide (MAAM) and 4-vinyl pyridine (4VP) were tested as functional monomers and ethylene glycole dimethacrylate (EDMA) was used as a cross-linker monomer in polymeric feed. Binding properties and imprinting factor (IF) of MIPs were studied in comparison with their non-imprinted ones (Blank) in organic and aqueous media. Diclofenac release in aqueous solvents at pH values of 1.5, 6.0 and 8.0, simulating gastrointestinal fluids, were also studied. The results indicated the specific binding of diclofenac to imprinted polymers. Duo to the stronger non-specific bounds in aqueous solutions, IF values decreased in water compared to acetonitrile as an organic medium. Our results proved that all polymers represented pH-responsive diclofenac delivery at above conditions. The data showed that imprinted polymer, prepared by MAA had superior properties, in comparison with other polymers, for minimum release (14%) of drug in gastric acid and maximum release (90%) in basic condition. The results indicated that diclofenac imprinted polymer could be used as a pH-responsive matrix in preparation of a new drug delivery system for diclofenac.

Iranian Journal of Basic Medical Sciences, comparison of the three recent years.

Objectives: Melatonin, an important hormone secreted by the epiphysis, is a powerful anti-oxidant with a high potential to neutralize medical toxins. The goal of this study was to demonstrate the beneficial effect of melatonin on epididymal sperm and reproductive parameters in mice treated with acetylsalicylic acid (ASA). Materials and Methods: Male adult mice were divided into four treatment groups: control, ASA, melatonin, and ASA+melatonin. Mice were administered ASA (50 mg/kg, orally) and/or melatonin (10 mg/kg, intraperitoneally), or vehicle control, for 14 days. Sperm count, sperm motility, and sperm morphology were evaluated to assess fertility. A colorimetric assay was used to measure serum total antioxidant capacity (TAC). A sperm chromatin dispersion (SCD) test was used to assess sperm chromatin integrity. Sex hormone levels were measured by ELISA. Results: Compared to the control group, ASA treatment resulted in a significant decrease in sperm parameters (P<0.05), as well as a decrease in the integrity of sperm chromatin (P<0.01). ASA treatment also reduced serum testosterone and TAC levels (P<0.05). Co-administration of melatonin with ASA significantly improved epididymal sperm parameters and increased serum testosterone and TAC levels compared to the ASA-treated group. LH level was not different in the combined treatment group compared to control or ASA treatment. Conclusion: Short-term administration of ASA (50 mg/kg) has adverse effects on male reproductive function in mice. Co-administration of melatonin protects against ASA-induced impairment of male reproductive function by preventing the reduction in serum TAC and testosterone levels seen with ASA treatment alone.