Fast Outer-Sphere Electron Transfer and High Specific Capacitance at Covalently Modified Carbon Electrodes.

Carbon electrodes typically display sluggish electron transfer kinetics due to the adsorption of adventitious molecules that effectively insulate the surface. Here, we describe a method for rendering graphitic carbon electrodes permanently hydrophilic by functionalization with 4-(diazonium)benzenesulfonic acid. In aqueous electrolytes, these hydrophilic carbon electrodes exhibit metal-like specific capacitance (∼40 µF/cm2) as measured by cyclic voltammetry, suggesting a change in the double-layer structure at the carbon surface. Additionally, the modified electrodes show fast charge transfer kinetics to outer-sphere one-electron redox couples such as ferro-/ferricyanide as well as improved electron transfer kinetics in alkaline aqueous redox flow batteries.

Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core/Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures.

The dynamics of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient absorption spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat band potential. Photoinduced electron injection in core/shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentrations of acetonitrile. In acetonitrile-rich electrolytes, electron injection is suppressed due to the very negative flat band potential of the TiO2 shell. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. Conduction band electrons in SnO2 are trapped at the core/shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye-sensitized SnO2/TiO2 core/shell photoanodes is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.

Tailoring Interfaces for Enhanced Methanol Production from Photoelectrochemical CO2 Reduction.

Efficient and stable photoelectrochemical reduction of CO2 into highly reduced liquid fuels remains a formidable challenge, which requires an innovative semiconductor/catalyst interface to tackle. In this study, we introduce a strategy involving the fabrication of a silicon micropillar array structure coated with a superhydrophobic fluorinated carbon layer for the photoelectrochemical conversion of CO2 into methanol. The pillars increase the electrode surface area, improve catalyst loading and adhesion without compromising light absorption, and help confine gaseous intermediates near the catalyst surface. The superhydrophobic coating passivates parasitic side reactions and further enhances local accumulation of reaction intermediates. Upon one-electron reduction of the molecular catalyst, the semiconductor-catalyst interface changes from adaptive to buried junctions, providing a sufficient thermodynamic driving force for CO2 reduction. These structures together create a unique microenvironment for effective reduction of CO2 to methanol, leading to a remarkable Faradaic efficiency reaching 20% together with a partial current density of 3.4 mA cm-2, surpassing the previous record based on planar silicon photoelectrodes by a notable factor of 17. This work demonstrates a new pathway for enhancing photoelectrocatalytic CO2 reduction through meticulous interface and microenvironment tailoring and sets a benchmark for both Faradaic efficiency and current density in solar liquid fuel production.

Zombie diatoms: acoustically powered diatom frustule bio-templated microswimmers.

Frustules, or the silica based cell walls of diatomaceous algae Aulacoseira granulata, provide large numbers of reliably cylindrical microstructures with an inner cavity and surface chemistry suitable for constructing bubble-based, acoustically-powered micro-swimmers. In this way, microswimmers can be made in a scalable, accessible and low-cost manner, enabling studies of their individual and collective behavior as active colloids.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies.

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Direct Vibrational Stark Shift Probe of Quasi-Fermi Level Alignment in Metal Nanoparticle Catalyst-Based Metal-Insulator-Semiconductor Junction Photoelectrodes.

Photoelectrodes consisting of metal-insulator-semiconductor (MIS) junctions are a promising candidate architecture for water splitting and for the CO2 reduction reaction (CO2RR). The photovoltage is an essential indicator of the driving force that a photoelectrode can provide for surface catalytic reactions. However, for MIS photoelectrodes that contain metal nanoparticles, direct photovoltage measurements at the metal sites under operational conditions remain challenging. Herein, we report a new in situ spectroscopic approach to probe the quasi-Fermi level of metal catalyst sites in heterogeneous MIS photoelectrodes via surface-enhanced Raman spectroscopy. Using a CO2RR photocathode, nanoporous p-type Si modified with Ag nanoparticles, as a prototype, we demonstrate a selective probe of the photovoltage of ∼0.59 V generated at the Si/SiOx/Ag junctions. Because it can directly probe the photovoltage of MIS heterogeneous junctions, this vibrational Stark probing approach paves the way for the thermodynamic evaluation of MIS photoelectrodes with varied architectural designs.

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear CuI Compounds.

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO2 reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between CuI and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, Keq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Finally, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports.

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when characterized using aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 °C under reducing conditions. This study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

Renewable electricity storage using electrolysis.

Electrolysis converts electrical energy into chemical energy by storing electrons in the form of stable chemical bonds. The chemical energy can be used as a fuel or converted back to electricity when needed. Water electrolysis to hydrogen and oxygen is a well-established technology, whereas fundamental advances in CO2 electrolysis are still needed to enable short-term and seasonal energy storage in the form of liquid fuels. This paper discusses the electrolytic reactions that can potentially enable renewable energy storage, including water, CO2 and N2 electrolysis. Recent progress and major obstacles associated with electrocatalysis and mass transfer management at a system level are reviewed. We conclude that knowledge and strategies are transferable between these different electrochemical technologies, although there are also unique complications that arise from the specifics of the reactions involved.

Stable metal anodes enabled by a labile organic molecule bonded to a reduced graphene oxide aerogel.

Metallic anodes (lithium, sodium, and zinc) are attractive for rechargeable battery technologies but are plagued by an unfavorable metal-electrolyte interface that leads to nonuniform metal deposition and an unstable solid-electrolyte interphase (SEI). Here we report the use of electrochemically labile molecules to regulate the electrochemical interface and guide even lithium deposition and a stable SEI. The molecule, benzenesulfonyl fluoride, was bonded to the surface of a reduced graphene oxide aerogel. During metal deposition, this labile molecule not only generates a metal-coordinating benzenesulfonate anion that guides homogeneous metal deposition but also contributes lithium fluoride to the SEI to improve Li surface passivation. Consequently, high-efficiency lithium deposition with a low nucleation overpotential was achieved at a high current density of 6.0 mA cm-2 A Li|LiCoO2 cell had a capacity retention of 85.3% after 400 cycles, and the cell also tolerated low-temperature (-10 °C) operation without additional capacity fading. This strategy was applied to sodium and zinc anodes as well.

Aqueous Photoelectrochemical CO2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst.

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO2 reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO2 to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of -0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s-1 . To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO2 to methanol. This work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO2 reduction to CO and methanol.

Basal Plane Functionalization of Niobium Disulfide Nanosheets with Cyclopentadienyl Manganese(I) Dicarbonyl.

Basal plane-functionalized NbS2 nanosheets were obtained using in situ photolysis to generate the coordinatively unsaturated organometallic fragment cyclopentadienyl manganese(I) dicarbonyl (CpMn(CO)2). Under UV irradiation, a labile carbonyl ligand dissociates from the tricarbonyl complex, creating an open coordination site for bonding between the Mn atom and the electron-rich sulfur atoms on the surface of the NbS2 nanosheets. In contrast, no reaction is observed with 2H-MoS2 nanosheets under the same reaction conditions. This difference in reactivity is consistent with the electronic structure calculations, which indicate stronger bonding of the organometallic fragment to electron-poor, metallic NbS2 than to semiconducting, electron-rich MoS2. X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared (FTIR) spectroscopy, and powder X-ray diffraction (PXRD) were used to characterize the bonding between Mn and S atoms on the surface-functionalized nanosheets.

Dye-sensitized photoelectrochemical water oxidation through a buried junction.

Water oxidation has long been a challenge in artificial photosynthetic devices that convert solar energy into fuels. Water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs) provide a modular approach for integrating light-harvesting molecules with water-oxidation catalysts on metal-oxide electrodes. Despite recent progress in improving the efficiency of these devices by introducing good molecular water-oxidation catalysts, WS-DSPECs have poor stability, owing to the oxidation of molecular components at very positive electrode potentials. Here we demonstrate that a solid-state dye-sensitized solar cell (ss-DSSC) can be used as a buried junction for stable photoelectrochemical water splitting. A thin protecting layer of TiO2 grown by atomic layer deposition (ALD) stabilizes the operation of the photoanode in aqueous solution, although as a solar cell there is a performance loss due to increased series resistance after the coating. With an electrodeposited iridium oxide layer, a photocurrent density of 1.43 mA cm-2 was observed in 0.1 M pH 6.7 phosphate solution at 1.23 V versus reversible hydrogen electrode, with good stability over 1 h. We measured an incident photon-to-current efficiency of 22% at 540 nm and a Faradaic efficiency of 43% for oxygen evolution. While the potential profile of the catalyst layer suggested otherwise, we confirmed the formation of a buried junction in the as-prepared photoelectrode. The buried junction design of ss-DSSs adds to our understanding of semiconductor-electrocatalyst junction behaviors in the presence of a poor semiconducting material.

Nondestructive Measurements of the Mechanical and Structural Properties of Nanostructured Metalattices.

Metalattices are artificial 3D solids, periodic on sub-100 nm length scales, that enable the functional properties of materials to be tuned. However, because of their complex structure, predicting and characterizing their properties is challenging. Here we demonstrate the first nondestructive measurements of the mechanical and structural properties of metalattices with feature sizes down to 14 nm. By monitoring the time-dependent diffraction of short wavelength light from laser-excited acoustic waves in the metalattices, we extract their acoustic dispersion, Young's modulus, filling fraction, and thicknesses. Our measurements are in excellent agreement with macroscopic predictions and potentially destructive techniques such as nanoindentation and scanning electron microscopy, with increased accuracy over larger areas. This is interesting because the transport properties of these metalattices do not obey bulk predictions. Finally, this approach is the only way to validate the filling fraction of metalattices over macroscopic areas. These combined capabilities can enable accurate synthesis of nanoenhanced materials.

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support.

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells, and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy, and adsorbate structure of Ag on dehydrated HCa2Nb3O10(001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated ("dh") calcium niobate nanosheets (dh-HCa2Nb3O10(001)) have the stoichiometry Ca4Nb6O19. They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below the monolayer coverage, Ag grows on dh-HCa2Nb3O10(001) as 2D islands of thickness ∼2 layers. The differential heat of Ag adsorption is initially ∼303 kJ/mol, increasing slowly to ∼338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically toward silver's heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m2, larger than that on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. These results demonstrate an easy way to do single-crystal-type surface science studies-and especially thermochemical measurements-on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh-vacuum annealing in O2.

An Artificial Z-Scheme Constructed from Dye-Sensitized Metal Oxide Nanosheets for Visible Light-Driven Overall Water Splitting.

Sensitization of a wide-gap oxide semiconductor with a visible-light-absorbing dye has been studied for decades as a means of producing H2 from water. However, efficient overall water splitting using a dye-sensitized oxide photocatalyst has remained an unmet challenge. Here we demonstrate visible-light-driven overall water splitting into H2 and O2 using HCa2Nb3O10 nanosheets sensitized by a Ru(II) tris-diimine type photosensitizer, in combination with a WO3-based water oxidation photocatalyst and a triiodide/iodide redox couple. With the use of Pt-intercalated HCa2Nb3O10 nanosheets further modified with amorphous Al2O3 clusters as the H2 evolution component, the dye-based turnover number and frequency for H2 evolution reached 4580 and 1960 h-1, respectively. The apparent quantum yield for overall water splitting using 420 nm light was 2.4%, by far the highest among dye-sensitized overall water splitting systems reported to date. The present work clearly shows that a carefully designed dye/oxide hybrid has great potential for photocatalytic H2 production, and represents a significant leap forward in the development of solar-driven water splitting systems.

Polymer-inorganic solid-electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions.

The solid-electrolyte interphase (SEI) is pivotal in stabilizing lithium metal anodes for rechargeable batteries. However, the SEI is constantly reforming and consuming electrolyte with cycling. The rational design of a stable SEI is plagued by the failure to control its structure and stability. Here we report a molecular-level SEI design using a reactive polymer composite, which effectively suppresses electrolyte consumption in the formation and maintenance of the SEI. The SEI layer consists of a polymeric lithium salt, lithium fluoride nanoparticles and graphene oxide sheets, as evidenced by cryo-transmission electron microscopy, atomic force microscopy and surface-sensitive spectroscopies. This structure is different from that of a conventional electrolyte-derived SEI and has excellent passivation properties, homogeneity and mechanical strength. The use of the polymer-inorganic SEI enables high-efficiency Li deposition and stable cycling of 4 V Li|LiNi0.5Co0.2Mn0.3O2 cells under lean electrolyte, limited Li excess and high capacity conditions. The same approach was also applied to design stable SEI layers for sodium and zinc anodes.

2-Aminobenzenethiol-Functionalized Silver-Decorated Nanoporous Silicon Photoelectrodes for Selective CO2 Reduction.

A molecularly thin layer of 2-aminobenzenethiol (2-ABT) was adsorbed onto nanoporous p-type silicon (b-Si) photocathodes decorated with Ag nanoparticles (Ag NPs). The addition of 2-ABT alters the balance of the CO2 reduction and hydrogen evolution reactions, resulting in more selective and efficient reduction of CO2 to CO. The 2-ABT adsorbate layer was characterized by Fourier transform infrared (FTIR) spectroscopy and modeled by density functional theory calculations. Ex situ X-ray photoelectron spectroscopy (XPS) of the 2-ABT modified electrodes suggests that surface Ag atoms are in the +1 oxidation state and coordinated to 2-ABT via Ag-S bonds. Under visible light illumination, the onset potential for CO2 reduction was -50 mV vs. RHE, an anodic shift of about 150 mV relative to a sample without 2-ABT. The adsorption of 2-ABT lowers the overpotentials for both CO2 reduction and hydrogen evolution. A comparison of electrodes functionalized with different aromatic thiols and amines suggests that the primary role of the thiol group in 2-ABT is to anchor the NH2 group near the Ag surface, where it serves to bind CO2 and also to assist in proton transfer.

Two Forces Are Better than One: Combining Chemical and Acoustic Propulsion for Enhanced Micromotor Functionality.

Engines and motors are everywhere in the modern world, but it is a challenge to make them work if they are very small. On the micron length scale, inertial forces are weak and conventional motor designs involving, e.g., pistons, jets, or flywheels cease to function. Biological motors work by a different principle, using catalysis to convert chemical to mechanical energy on the nanometer length scale. To do this, they must apply force continuously against their viscous surroundings, and because of their small size, their movement is "jittery" because of the random shoves and turns they experience from molecules in their surroundings. The first synthetic catalytic motors, discovered about 15 years ago, were bimetallic Pt-Au microrods that swim in fluids through self-electrophoresis, a mechanism that is apparently not used by biological catalytic nanomotors. Despite the difference in propulsion mechanisms, catalytic microswimmers are subject to the same external forces as natural swimmers such as bacteria. Therefore, they follow similar scaling laws, are subject to Brownian forces, and exhibit a rich array of biomimetic emergent behavior (e.g., chemotaxis, rheotaxis, schooling, and predator-prey behavior). It was later discovered, quite by accident, that the same metallic microrods undergo rapid autonomous movement in acoustic fields, converting excitation energy in the frequency (MHz) and power range (up to several W/cm2) that is commonly used for ultrasonic imaging into axial movement. Because the acoustic propulsion mechanism is fuel-free, it can operate in media that have been inaccessible to chemically powered motors, such as the interior of living cells. The power levels used are intermediate between those of ultrasonic diagnostic imaging and therapy, so the translation of basic research on microswimmers into biomedical applications, including in vivo diagnostics and drug delivery, is possible. Acoustic and chemical propulsion are applied independently to microswimmers, so by modulating the acoustic power one can achieve microswimmer functionalities that are not accessible with the individual propulsion mechanisms. These include motion of particles forward and backward with switching between chemical and acoustic propulsion, the assembly/disassembly equilibrium of particle swarms and colloidal molecules, and controllable upstream or downstream propulsion in a flowing fluid. This Account relates our current understanding of the chemical and acoustic propulsion mechanisms, and describes how their combination can be particularly powerful for imparting enhanced functionality to micromotors.

Balancing Water Dissociation and Current Densities To Enable Sustainable Hydrogen Production with Bipolar Membranes in Microbial Electrolysis Cells.

Hydrogen production using two-chamber microbial electrolysis cells (MECs) is usually adversely impacted by a rapid rise in catholyte pH because of proton consumption for the hydrogen evolution reaction. While using a bipolar membrane (BPM) will maintain a more constant electrolyte pH, the large voltage loss across this membrane reduces performance. To overcome these limitations, we used an acidic catholyte to compensate for the potential loss incurred by using a BPM. A hydrogen production rate of 1.2 ± 0.7 L-H2/L/d (jmax = 10 ± 0.4 A/m2) was obtained using a Pt cathode and BPM with a pH difference (ΔpH = 6.1) between the two chambers. This production rate was 2.8 times greater than that of a conventional MEC with an anion exchange membrane (AEM, 0.43 ± 0.1 L-H2/L/d, jmax = 6.5 ± 0.3 A/m2). The catholyte pH gradually increased to 11 ± 0.3 over 9 days using the BPM and Pt/C, which decreased current production (jmax = 2.5 ± 0.3 A/m2). However, this performance was much better than that obtained using an AEM as the catholyte pH increased to 10 ± 0.4 after just one day. The use of an activated carbon cathode with the BPM enabled stable performance over a longer period of 12 days, although it reduced the hydrogen production rate (0.45 ± 0.1 L-H2/L/d).