Non-equilibrium transport in polymer mixed ionic-electronic conductors at ultrahigh charge densities.

Conducting polymers are mixed ionic-electronic conductors that are emerging candidates for neuromorphic computing, bioelectronics and thermoelectrics. However, fundamental aspects of their many-body correlated electron-ion transport physics remain poorly understood. Here we show that in p-type organic electrochemical transistors it is possible to remove all of the electrons from the valence band and even access deeper bands without degradation. By adding a second, field-effect gate electrode, additional electrons or holes can be injected at set doping states. Under conditions where the counterions are unable to equilibrate in response to field-induced changes in the electronic carrier density, we observe surprising, non-equilibrium transport signatures that provide unique insights into the interaction-driven formation of a frozen, soft Coulomb gap in the density of states. Our work identifies new strategies for substantially enhancing the transport properties of conducting polymers by exploiting non-equilibrium states in the coupled system of electronic charges and counterions.

Does Indoxyl Sulfate Have a Role in Uremic Pruritus? A Laboratory and Interventional Study.

BACKGROUND: Pruritus is a common complaint in patients with end-stage renal disease. Indoxyl sulfate (IS) is a tryptophan end metabolite extremely renal excreted. Activated charcoal can interfere with IS intestinal absorption. OBJECTIVES: To evaluate the serum level of IS and the effect of activated charcoal on uremic pruritus. MATERIALS AND METHODS: In all, 135 participants were divided into 2 main groups. In total, 45 normal and healthy individuals as a control group and 90 patients on regular hemodialysis; 45 of these patients had uremic pruritus and the other 45 were not complaining of uremic pruritus. Serum IS was measured. Activated charcoal was used by patients with uremic pruritus. The severity of pruritus and Dermatology Life Quality Index (DLQI) were assessed. RESULTS: The serum IS was significantly elevated in uremic patients than in control subjects (P < .001) and significantly elevated in uremic patients without pruritus (P < .001). Furthermore, there were positive significant correlations between the serum IS and both severity of pruritus (P < .001) and DLQI (P < .001). After activated charcoal usage, there was a significant decrease in IS level with the improvement of pruritus and quality of life of patients. CONCLUSIONS: IS may play a role in uremic pruritus. Activated charcoal could be considered a treatment for uremic pruritus.

Surface doping of rubrene single crystals by molecular electron donors and acceptors.

The surface molecular doping of organic semiconductors can play an important role in the development of organic electronic or optoelectronic devices. Single-crystal rubrene remains a leading molecular candidate for applications in electronics due to its high hole mobility. In parallel, intensive research into the fabrication of flexible organic electronics requires the careful design of functional interfaces to enable optimal device characteristics. To this end, the present work seeks to understand the effect of surface molecular doping on the electronic band structure of rubrene single crystals. Our angle-resolved photoemission measurements reveal that the Fermi level moves in the band gap of rubrene depending on the direction of surface electron-transfer reactions with the molecular dopants, yet the valence band dispersion remains essentially unperturbed. This indicates that surface electron-transfer doping of a molecular single crystal can effectively modify the near-surface charge density, while retaining good charge-carrier mobility.

Understanding the evolution of the Raman spectra of molecularly p-doped poly(3-hexylthiophene-2,5-diyl): signatures of polarons and bipolarons.

Molecular doping is a key process to increase the density of charge carriers in organic semiconductors. Doping-induced charges in polymer semiconductors result in the formation of polarons and/or bipolarons due to the strong electron-vibron coupling in conjugated organic materials. Identifying the nature of charge carriers in doped polymers is essential to optimize the doping process for applications. In this work, we use Raman spectroscopy to investigate the formation of charge carriers in molecularly doped poly(3-hexylthiophene-2,5-diyl) (P3HT) for increasing dopant concentration, with the organic salt dimesityl borinium tetrakis(penta-fluorophenyl)borate (Mes2B+ [B(C6F5)4]-) and the Lewis acid tris(pentafluorophenyl)borane [B(C6F5)3]. While the Raman signatures of neutral P3HT and singly charged P3HT segments (polarons) are known, the Raman spectra of doubly charged P3HT segments (bipolarons) are not yet sufficiently understood. Combining Raman spectroscopy measurements on doped P3HT thin films with first-principles calculations on oligomer models, we explain the evolution of the Raman spectra from neutral P3HT to increasingly doped P3HT featuring polarons and eventually bipolarons at high doping levels. We identify and explain the origin of the spectral features related to bipolarons by tracing the Raman signature of the symmetric collective vibrations along the polymer backbone, which - compared to neutral P3HT - redshifts for polarons and blueshifts for bipolarons. This is explained by a planarization of the singly charged P3HT segments with polarons and rather high order in thin films, while the doubly charged segments with bipolarons are located in comparably disordered regions of the P3HT film due to the high dopant concentration. Furthermore, we identify additional Raman peaks associated with vibrations in the quinoid doubly charged segments of the polymer. Our results offer the opportunity for readily identifying the nature of charge carriers in molecularly doped P3HT while taking advantage of the simplicity, versatility, and non-destructive nature of Raman spectroscopy.

A randomized controlled trial of two-doses of vaginal progesterone 400 vs. 200 mg for prevention of preterm labor in twin gestations.

OBJECTIVES: To compare between the effectiveness and safety of two different daily doses of vaginal progesterone (400 vs. 200 mg) in the prevention of preterm labor in twin pregnancy. METHODS: This is a prospective single-blinded randomized controlled trial conducted on 100 primi-gravida who had twin pregnancy and attended the antenatal clinic of a University hospital. They were equally and randomly allocated into two arms each containing 50 patients. Arm 1 received 400 mg and arm 2 received 200 mg vaginal progesterone daily at bed time starting from 14 weeks of pregnancy to 36 weeks. Transvaginal ultrasound was performed for assessment of the length of cervix at 14 and 22 weeks. RESULTS: Both arms of the current study were comparable regarding the cervical length at 14 and 22 weeks, mean gestational age at delivery, incidence of pre-term delivery, birth weight of the first twin. Second twin in addition to the average weight of both twins. No statistical significance differences between two arms regarding incidence of early neonatal death. NICU, mechanical ventilation, length of admission in NICU for the first twin. Second twin as well as both twins. CONCLUSIONS: Vaginal progesterone treatment with different doses was tolerable, but wasn't effective in the prevention of preterm labor in twin pregnancy.

Towards understanding the doping mechanism of organic semiconductors by Lewis acids.

Precise doping of organic semiconductors allows control over the conductivity of these materials, an essential parameter in electronic applications. Although Lewis acids have recently shown promise as dopants for solution-processed polymers, their doping mechanism is not yet fully understood. In this study, we found that B(C6F5)3 is a superior dopant to the other Lewis acids investigated (BF3, BBr3 and AlCl3). Experiments indicate that Lewis acid-base adduct formation with polymers inhibits the doping process. Electron-nuclear double-resonance and nuclear magnetic resonance experiments, together with density functional theory, show that p-type doping occurs by generation of a water-Lewis acid complex with substantial Brønsted acidity, followed by protonation of the polymer backbone and electron transfer from a neutral chain segment to a positively charged, protonated one. This study provides insight into a potential path for protonic acid doping and shows how trace levels of water can transform Lewis acids into powerful Brønsted acids.

Double Charged Surface Layers in Lead Halide Perovskite Crystals.

Understanding defect chemistry, particularly ion migration, and its significant effect on the surface's optical and electronic properties is one of the major challenges impeding the development of hybrid perovskite-based devices. Here, using both experimental and theoretical approaches, we demonstrated that the surface layers of the perovskite crystals may acquire a high concentration of positively charged vacancies with the complementary negatively charged halide ions pushed to the surface. This charge separation near the surface generates an electric field that can induce an increase of optical band gap in the surface layers relative to the bulk. We found that the charge separation, electric field, and the amplitude of shift in the bandgap strongly depend on the halides and organic moieties of perovskite crystals. Our findings reveal the peculiarity of surface effects that are currently limiting the applications of perovskite crystals and more importantly explain their origins, thus enabling viable surface passivation strategies to remediate them.

Improving the Resistance of Molecularly Doped Polymer Semiconductor Layers to Solvent.

The ability to form multi-heterolayer (opto)electronic devices by solution processing of (molecularly doped) semiconducting polymer layers is of great interest since it can facilitate the fabrication of large-area and low-cost devices. However, the solution processing of multilayer devices poses a particular challenge with regard to dissolution of the first layer during the deposition of a second layer. Several approaches have been introduced to circumvent this problem for neat polymers, but suitable approaches for molecularly doped polymer semiconductors are much less well-developed. Here, we provide insights into two different mechanisms that can enhance the solvent resistance of solution-processed doped polymer layers while also retaining the dopants, one being the doping-induced pre-aggregation in solution and the other including the use of a photo-reactive agent that results in covalent cross-linking of the semiconductor and, perhaps in some cases, the dopant. For molecularly p-doped poly(3-hexylthiophene-2,5-diyl) and poly[2,5-bis(3-tetradecyl-thiophene-2-yl)thieno(3,2-b)thiophene] layers, we find that the formation of polymer chain aggregates prior to the deposition from solution plays a major role in enhancing solvent resistance. However, this pre-aggregation limits inclusion of the cross-linking agent benzene-1,3,5-triyl tris(4-azido-2,3,5,6-tetrafluorobenzoate). We show that if pre-aggregation in solution is suppressed, high resistance of thin doped polymer layers to solvent can be achieved using the tris(azide). Moreover, the electrical conductivity can be largely retained by increasing the tris(azide) content in a doped polymer layer.

Coordination of Tetracyanoquinodimethane-Derivatives with Tris(pentafluorophenyl)borane Provides Stronger p-Dopants with Enhanced Stability.

Strong molecular dopants for organic semiconductors that are stable against diffusion are in demand, enhancing the performance of organic optoelectronic devices. The conventionally used p-dopants based on 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its derivatives "FxTCN(N)Q", such as 2,3,4,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) and 1,3,4,5,7,8-hexafluorotetracyano-naphthoquinodimethane (F6TCNNQ), feature limited oxidation strength, especially for modern polymer semiconductors with high ionization energy (IE). These small molecular dopants also exhibit pronounced diffusion in the polymer hosts. Here, we demonstrate a facile approach to increase the oxidation strength of FxTCN(N)Q by coordination with four tris(pentafluorophenyl)borane (BCF) molecules using a single-step solution mixing process, resulting in bulky dopant complexes "FxTCN(N)Q-4(BCF)". Using a series of polymer semiconductors with IE up to 5.9 eV, we show by optical absorption spectroscopy of solutions and thin films that the efficiency of doping using FxTCN(N)Q-4(BCF) is significantly higher compared to that using FxTCN(N)Q or BCF alone. Electrical transport measurements with the prototypical poly(3-hexylthiophene-2,5-diyl) (P3HT) confirm the higher doping efficiency of F4TCNQ-4(BCF) compared to F4TCNQ. Additionally, the bulkier structure of F4TCNQ-4(BCF) is shown to result in higher stability against drift in P3HT under an applied electric field as compared to F4TCNQ. The simple approach of solution-mixing of readily accessible molecules thus offers access to enhanced molecular p-dopants for the community.

Spectral Signatures of a Negative Polaron in a Doped Polymer Semiconductor: Energy Levels and Hubbard U Interactions.

The modern picture of negative charge carriers on conjugated polymers invokes the formation of a singly occupied (spin-up/spin-down) level within the polymer gap and a corresponding unoccupied level above the polymer conduction band edge. The energy splitting between these sublevels is related to on-site Coulomb interactions between electrons, commonly termed Hubbard U. However, spectral evidence for both sublevels and experimental access to the U value is still missing. Here, we provide evidence by n-doping the polymer P(NDI2OD-T2) with [RhCp*Cp]2, [N-DMBI]2, and cesium. Changes in the electronic structure after doping are studied with ultraviolet photoelectron and low-energy inverse photoemission spectroscopies (UPS, LEIPES). UPS data show an additional density of states (DOS) in the former empty polymer gap while LEIPES data show an additional DOS above the conduction band edge. These DOS are assigned to the singly occupied and unoccupied sublevels, allowing determination of a U value of ∼1 eV.

Use of a Multiple Hydride Donor To Achieve an n-Doped Polymer with High Solvent Resistance.

The ability to insolubilize doped semiconducting polymer layers can help enable the fabrication of efficient multilayer solution-processed electronic and optoelectronic devices. Here, we present a promising approach to simultaneously n-dope and largely insolubilize conjugated polymer films using tetrakis[{4-(1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)phenoxy}methyl]methane (tetrakis-O-DMBI-H), which consists of four 2,3-dihydro-1H-benzoimidazole (DMBI-H) n-dopant moieties covalently linked to one another. Doping a thiophene-fused benzodifurandione-based oligo(p-phenylenevinylene)-co-thiophene polymer (TBDOPV-T) with tetrakis-O-DMBI-H results in a highly n-doped film with bulk conductivity of 15 S cm-1. Optical absorption spectra provide evidence for film retention of ∼93% after immersion in o-dichlorobenzene for 5 min. The optical absorption signature of the charge carriers in the n-doped polymer decreases only slightly more than that of the neutral polymer under these conditions, indicating that the exposure to solvent also results in negligible dedoping of the film. Moreover, thermal treatment studies on a tetrakis-O-DMBI-H-doped TBDOPV-T film in contact with another undoped polymer film indicate immobilization of the molecular dopant in TBDOPV-T. This is attributed to the multiple electrostatic interactions between each dopant tetracation and up to four nearby anionic doped polymer segments.

Coupled Organic-Inorganic Nanostructures with Mixed Organic Linker Molecules.

The electronic properties of semiconducting inorganic lead sulfide (PbS) nanocrystals (NCs) and organic linker molecules are dependent on the size of NCs as well as the used ligands. Here, we demonstrate that a weakly binding ligand can be successfully attached to PbS NCs to form a coupled organic-inorganic nanostructure (COIN) by mixing with a strong binding partner. We use the weakly binding zinc ß-tetraaminophthalocyanine (Zn4APc) in combination with the strongly binding 1,2-ethanedithiol (EDT) as a mixed ligand system and compare its structural, electronic, and (photo-)electrical properties with both single-ligand COINs. It is found that binding of Zn4APc is assisted by the presence of EDT leading to improved film homogeneity, lower trap density, and enhanced photocurrent of the derived devices. Thus, the mixing of ligands is a versatile tool to achieve COINs with improved performance.

Anti-PLA2R and anti-THSD7A as Diagnostic Serological Markers of Idiopathic Membranous Nephropathy: A Single Centre Study.

Idiopathic Membranous Nephropathy (IMN) is a renal-limited autoimmune disease and accounts for approximately 80% of MNs. This study aimed to evaluate the role of circulating Anti-PLA2R and anti-THSD7A autoantibodies in the diagnosis and differentiation between primary and secondary MN. This study was conducted on 58 adult patients with biopsy-proven membranous glomerulopathy (MGN). All were subjected to measurement of Anti-PLA2R1 by an Enzyme-Linked Immunosorbent Assay and anti-THSD7A was detected by an indirect immunofluorescence assay. Among the 58 patients, 79.3% were diagnosed as IMN, and 20.7% as secondary membranous glomerulopathy (SMN). Among IMN patients, 32 patients (69.6%) showed positive anti-PLA2R1 antibodies, 2 patients (4.3%) were positive for anti-THSD7A antibodies and the remaining 12 patients (26.1%) were negative for both types of antibodies. Patients with SMN were negative for the two antibodies. The IMN patients had lower serum creatinine compared to the SMN patients (P=0.017). In conclusion, the study demonstrates that approximately 70% of patients with idiopathic membranous nephropathy have antibodies against PLA2R indicating that Anti-PLA2R may be fast, easy, relatively sensitive, and non-invasive test for diagnosis of IMN..

Facile and noninvasive passivation, doping and chemical tuning of macroscopic hybrid perovskite crystals.

Halide vacancies and associated metallic lead (Pb°) observed at the surface and deep inside macroscopic organolead trihalide perovskite crystals is removed through a facile and noninvasive treatment. Indeed, Br2 vapor is shown to passivate Br-vacancies and associated Pb° in the bulk of macroscopic crystals. Controlling the exposure time can markedly improve the overall stoichiometry for moderate exposures or introduce excessive bromide for long exposures, resulting in p-doping of the crystals. In the low dose passivation regime, Hall effect measurements reveal a ca. 3-fold increase in carrier mobility to ca. 15 cm2V-1s-1, while the p-doping increases the electrical conductivity ca. 10000-fold, including a 50-fold increase in carrier mobility to ca. 150 cm2V-1s-1. The ease of diffusion of Br2 vapor into macroscopic crystals is ascribed to the porosity allowed in rapidly grown crystals through aggregative processes of the colloidal sol during growth of films and macroscopic crystals. This process is believed to form significant growth defects, including open voids, which may be remnants of the escaping solvent at the solidification front. These results suggest that due to the sol-gel-like nature of the growth process, macroscopic perovskite crystals reported in this study are far from perfect and point to possible pathways to improving the optoelectronic properties of these materials. Nevertheless, the ability of the vapor-phase approach to access and tune the bulk chemistry and properties of nominally macroscopic perovskite crystals provides interesting new opportunities to precisely manipulate and functionalize the bulk properties of hybrid perovskite crystals in a noninvasive manner.

Quantitative Analysis of Doping-Induced Polarons and Charge-Transfer Complexes of Poly(3-hexylthiophene) in Solution.

The mechanism and the nature of the species formed by molecular doping of the model polymer poly(3-hexylthiophene) (P3HT) in its regioregular (rre-) and regiorandom (rra-) forms in solution are investigated for three different dopants: the prototypical π-electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), the strong Lewis acid tris(pentafluorophenyl)borane (BCF), and the strongly oxidizing complex molybdenum tris[1-(methoxycarbonyl)-2-(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd-CO2Me)3). In a combined optical and electron paramagnetic resonance study, we show that the doping of rreP3HT in solution occurs by integer charge transfer, resulting in formation of P3HT radical cations (polarons) for all of the dopants considered here. Remarkably, despite the different chemical nature of the dopants and dopant-polymer interaction, the formed polarons exhibit essentially identical optical absorption spectra. The situation is very different for the doping of rraP3HT, where we observe formation of a charge-transfer complex with F4TCNQ and of a "localized" P3HT polaron on nonaggregated chains upon doping with BCF, while there is no indication of dopant-induced species in the case of Mo(tfd-CO2Me)3. We estimate the ionization efficiency of the respective dopants for the two polymers in solution and report the molar extinction coefficient spectra of the three different species. Finally, we observe increased spin delocalization in regioregular compared to regiorandom P3HT by electron nuclear double resonance, suggesting that the ability of the charge to delocalize on aggregates of planarized polymer backbones plays a significant role in determining the doping mechanism.

An Organic Borate Salt with Superior p-Doping Capability for Organic Semiconductors.

Molecular doping allows enhancement and precise control of electrical properties of organic semiconductors, and is thus of central technological relevance for organic (opto-) electronics. Beyond single-component molecular electron acceptors and donors, organic salts have recently emerged as a promising class of dopants. However, the pertinent fundamental understanding of doping mechanisms and doping capabilities is limited. Here, the unique capabilities of the salt consisting of a borinium cation (Mes2B+; Mes: mesitylene) and the tetrakis(penta-fluorophenyl)borate anion [B(C6F5)4]- is demonstrated as p-type dopant for polymer semiconductors. With a range of experimental methods, the doping mechanism is identified to comprise electron transfer from the polymer to Mes2B+, and the positive charge on the polymer is stabilized by [B(C6F5)4]-. Notably, the former salt cation leaves during processing and is not present in films. The anion [B(C6F5)4]- even enables the stabilization of polarons and bipolarons in poly(3-hexylthiophene), not yet achieved with other molecular dopants. From doping studies with high ionization energy polymer semiconductors, the effective electron affinity of Mes2B+[B(C6F5)4]- is estimated to be an impressive 5.9 eV. This significantly extends the parameter space for doping of polymer semiconductors.

The Growth of Photoactive Porphyrin-Based MOF Thin Films Using the Liquid-Phase Epitaxy Approach and their Optoelectronic Properties.

This study reports on the optoelectronic properties of porphyrin-based metal-organic framework (MOF) thin films fabricated by a facile liquid-phase epitaxy approach. This approach affords the growth of MOF thin films that are free of morphological imperfections, more suitable for optoelectronic applications. Chemical modifications such as the porphyrin ligand metallation have been found to preserve the morphology of the grown films making this approach particularly suitable for molecular alteration of MOF thin film optoelectronic properties without compromising its mesoscale morphology significantly. Particularly, the metallation of the ligand was found to be effective to tune the MOF bandgap. These porphyrin-based MOF thin films were shown to function effectively as donor layers in solar cells based on a Fullerene-C60 acceptor. The ability to fabricate MOF solar cells free of a liquid-phase acceptor greatly simplifies device fabrication and enables pairing of MOFs as light absorbers with a wide range of acceptors including non-fullerene acceptors.

Conducting and Stretchable PEDOT:PSS Electrodes: Role of Additives on Self-Assembly, Morphology, and Transport.

The addition of dimethylsulfoxide and Zonyl into poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) can be combined to achieve excellent electrical, optical, and mechanical properties. We demonstrate that it is possible to produce highly transparent conducting electrodes (FoM > 35) with low Young's modulus and high carrier density. We investigated the relationship between the transport properties of PEDOT:PSS and the morphology and microstructure of these films by performing Hall effect measurement, atomic force microscopy, and grazing incidence wide-angle X-ray scattering (GIWAXS). Our analysis reveals the distinctive impact of the two additives on the PEDOT and PSS components in the solid-state PEDOT:PSS films. Both additives induce fibrillar formation in the film, and the combination of the two additives only enhances the fibrillary nature and the aggregations of both PEDOT and PSS components of the film. In situ GIWAXS allows to time-resolve the morphology evolution. Our analysis reveals the influence of additives on the aggregation and self-assembly behaviors of the PEDOT and PSS components. Aggregation occurs during the transition from wet to dry film, which is observed exclusively during the thermal annealing step of the as-cast hydrated film. These results indicate that the additives directly influence the self-assembly behaviors of PEDOT and PSS during the ink-to-solid phase transformation of the hydrated film, which occurs primarily during the initial seconds of post-deposition thermal annealing.

MXenes for Plasmonic Photodetection.

MXenes have recently shown impressive optical and plasmonic properties associated with their ultrathin-atomic-layer structure. However, their potential use in photonic and plasmonic devices has been only marginally explored. Photodetectors made of five different MXenes are fabricated, among which molybdenum carbide MXene (Mo2 CTx ) exhibits the best performance. Mo2 CTx MXene thin films deposited on paper substrates exhibit broad photoresponse in the range of 400-800 nm with high responsivity (up to 9 A W-1 ), detectivity (≈5 × 1011 Jones), and reliable photoswitching characteristics at a wavelength of 660 nm. Spatially resolved electron energy-loss spectroscopy and ultrafast femtosecond transient absorption spectroscopy of the MXene nanosheets reveal that the photoresponse of Mo2 CTx is strongly dependent on its surface plasmon-assisted hot carriers. Additionally, Mo2 CTx thin-film devices are shown to be relatively stable under ambient conditions, continuous illumination and mechanical stresses, illustrating their durable photodetection operation in the visible spectral range. Micro-Raman spectroscopy conducted on bare Mo2 CTx film and on gold electrodes allowing for surface-enhanced Raman scattering demonstrates surface chemistry and a specific low-frequency band that is related to the vibrational modes of the single nanosheets. The specific ability to detect and excite individual surface plasmon modes provides a viable platform for various MXene-based optoelectronic applications.