O-HEALTH-EDU: A viewpoint into the current state of Oral Health Professional education in Europe: Part 1: Programme-level data.

INTRODUCTION: Current legislation leaves Oral Health Professional (OHP) education open to wide interpretation and may result in significant variation in educational practice and resultant professional attributes across Europe. Data regarding the current state of OHP education across Europe is limited. The aim of Part 1 of this series is to provide programme-level data for Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education. METHODS: A 91-item questionnaire was developed following the Delphi method. The questionnaire and the Articulate glossary of OHP education terms were developed concurrently to facilitate a common understanding of language. Piloting was performed in multiple stages and included institutions internal and external to the research group. The questionnaire was uploaded online and converted to a data hub, allowing dental schools to control their own data and update the data provided whenever they wish. All ADEE member schools (n = 144) were invited to provide data. Forty questions relating to school details, Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education were included in this part of the series. RESULTS: Seventy-one institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Programme-level data for Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education is presented including programme length, funding, languages and fees, student numbers and demographics, student admission and selection processes and permission to practice after graduation. CONCLUSION: This series of papers, as far as the authors are aware, are the first attempts to build a comprehensive picture of the current state of OHP education in Europe. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

O-Health-Edu: A viewpoint into the current state of oral health professional education in Europe: Part 2: Curriculum structure, facilities, staffing and quality assurance.

INTRODUCTION: Oral health professional (OHP) education is likely to vary across Europe in accordance with an EU directive that is open to broad interpretation. It is not clear how OHP curricula are structured or delivered across Europe. The objectives of Part 2 of this paper series are: (i) to provide an overview of common practices in curriculum structure, the availability of facilities, staffing (faculty) and quality assurance processes and (ii) to consider how the existing programme structures align to stakeholder guidance documents. METHODS: A total of 27 questions from a 91-item questionnaire were used for this manuscript. The questionnaire was developed following the Delphi method to establish consensus from a group of experts. Members of the research team and colleagues from other countries in Europe completed a multi-step piloting process. An online data hub was created to allow the respondents to be data controllers and respond to the questionnaire. ADEE member schools (n = 144) were invited to provide data. RESULTS: Totally, 71 institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Data on curriculum approaches, teaching methods, integration of topics of interest, clinical education, staff-student ratios, access to facilities and new technologies, teaching staff (faculty) and quality assurance processes are presented for Primary Dental Degree Programmes. CONCLUSION: To the best of our knowledge, this series of papers are the first attempts to provide a comprehensive overview of OHP education in Europe. Results showed that the majority of European dental programmes are engaged in providing innovative and scientifically grounded education in order to develop quality future OHPs. Nevertheless, significant variability in the delivery of clinical education across the European OHP schools was notable in this dataset. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

Declarative knowledge in oral health: The case of the term 'centric occlusion'.

INTRODUCTION: The lack of academic agreement in the practical or clinical use of declarative knowledge can generate unnecessary confusion and miscommunication. The concept Centric Occlusion (CO) is part of the body of declarative knowledge in dentistry, but its definition remains unclear. OBJECTIVE: To ascertain the CO concept in articles published in dental journals as a study case for the dentistry "corpus" of declarative knowledge. METHODOLOGY: The alternative definitions of CO used by the GPT (Glossary of Prosthodontic Terms) from 1956-1977, 'CO as a synonym for maximum intercuspal contact (MIC)', or by the GPT from 1987-2017, 'CO may or may not coincide with MIC', were searched in the articles. The association between the CO definition used and variables such as article aims, journal scope and authors specialty was assessed. RESULTS: Eight hundred and twelve articles were analysed. The widespread use of CO as synonym of MIC was the main finding and was significantly associated to the Orthodontics field. The CO definition according to the GPT 1987-2017 was less frequently observed but appeared in all dentistry fields, showing a significant association with the Oral Rehabilitation field. The difficulty of incorporating the current definition of CO (by GPT) into the main clinical discussions was evidenced all the long of the review process. CONCLUSION: The lack of consensus in the concept use was confirmed by the present study case, showing the influence of specific fields in Oral Health declarative knowledge. This methodology can provide a tool to the academy to assess controversial terms or concepts in Oral Health education, thus facilitating the critical and reflexive learning by students.

ARTICULATE: A European glossary of terms used in oral health professional education.

INTRODUCTION: The Erasmus+O-Health-EDU project aims to gain a comprehensive view of oral health professional (OHP) education in Europe, through the development of web-based surveys and online toolkits. A glossary to facilitate a common language through which academic teams could cooperate and communicate more accurately was identified as a key need within the project. The aim of ARTICULATE was thus to create a shared language, with a European focus, for terms and concepts used in the field of OHP education. METHODS: The methodology was developed from those published for construction of other glossaries with a circular and iterative process: the creation of content and definitions by a group of experts in OHP education, the testing of "fitness for purpose" of the content, and stakeholder consultation. All creation steps were followed by refinements based on testing results and stakeholder comments. The final glossary was then launched as an online resource including a built-in mechanism for user feedback. RESULTS: The scope and structure of the glossary were mapped out at a workshop with 12 dental education experts from 7 European countries. A total of 328 terms were identified, of which 171 were finally included in ARTICULATE. After piloting with a close group of other colleagues, the glossary was opened for external input. Thirty European Deans or Heads of Education assessed the definition of each term as "clear" or "not clear." A total of 86 definitions were described as "clear" by all individuals. Terms deemed unclear by at least one individual were revisited and changes made to 37 of the definitions. In conjunction with the launch of the glossary, a range of stakeholder organisations were informed and asked to participate in an open global consultation by providing feedback online. Since its launch in June 2021, the ARTICULATE website (https://o-health-edu.org/articulate) has had an average of 500 visits/month. To promote community ownership, forms embedded on the ARTICULATE webpage allow users to give feedback and suggest new terms. A standing taskforce will meet regularly to consider amendments and make changes to ensure that the glossary remains a relevant and up-to-date resource over time. CONCLUSION: ARTICULATE is a unique, evolving, online glossary of terms relating to OHP education, created as a resource for all interested OHP educators. The glossary is a key output of the O-Health-Edu project, which relies on a comprehensive vision of OHP education to address the future oral health needs of the European population.

O-Health-Edu: A vision for oral health professional education in Europe.

This consensus paper reports on the process of developing a renewed vision for Oral Health Professional (OHP) education across Europe, and forms part of a larger EU-funded collaborative Erasmus+ project, "O-Health-Edu." The vision aligns with the World Health Organisation milestones (2016) and resolutions (2021), and EU4Health programme (2020) objectives - and projects 20 years into the future, to 2040. This longitudinal vision takes a multi-stakeholder perspective to deliver OHP education that acts in the best interests of both students and patients, and sits within the context of a wider strategy for general health. Included, it is an infographic to help communicate the vision to various stakeholders of OHP education.

Human Amnion Epithelial Cells: A Potential Cell Source for Pulp Regeneration?

The aim of this study was to analyze the suitability of pluripotent stem cells derived from the amnion (hAECs) as a potential cell source for revitalization in vitro. hAECs were isolated from human placentas, and dental pulp stem cells (hDPSCs) and dentin matrix proteins (eDMPs) were obtained from human teeth. Both hAECs and hDPSCs were cultured with 10% FBS, eDMPs and an osteogenic differentiation medium (StemPro). Viability was assessed by MTT and cell adherence to dentin was evaluated by scanning electron microscopy. Furthermore, the expression of mineralization-, odontogenic differentiation- and epithelial-mesenchymal transition-associated genes was analyzed by quantitative real-time PCR, and mineralization was evaluated through Alizarin Red staining. The viability of hAECs was significantly lower compared with hDPSCs in all groups and at all time points. Both hAECs and hDPSCs adhered to dentin and were homogeneously distributed. The regulation of odontoblast differentiation- and mineralization-associated genes showed the lack of transition of hAECs into an odontoblastic phenotype; however, genes associated with epithelial-mesenchymal transition were significantly upregulated in hAECs. hAECs showed small amounts of calcium deposition after osteogenic differentiation with StemPro. Pluripotent hAECs adhere on dentin and possess the capacity to mineralize. However, they presented an unfavorable proliferation behavior and failed to undergo odontoblastic transition.

Correction Power of Percutaneous Adductor Tendon Release (PATR) for the Treatment of Hallux Valgus: A Cadaveric Study.

Osteotomies are commonly used in order to correct hallux valgus deformity. However, soft tissue structures also play an essential role in the etiology, progression, and treatment of hallux valgus (HV). The purpose of the present study was to analyze the correcting power (varus), reduction strength (sesamoid) and rotation of metatarsal and proximal phalanx after percutaneous adductor tendon release (PATR). To date, no study addresses this issue. Eleven cadaveric fresh-frozen below-the-knee cadaveric lower limbs with associated hallux valgus deformity were used. These specimens were subjected to a constant abduction force after PATR. HV and intermetatarsal angles showed statistically significant differences when comparing the preoperative and postoperative periods. PATR showed to be a reliable technique as the adductor tendon was completely released in 9 cases, and 75% released in the remaining 2 feet. The study supports that PATR provides powerful and quantifiable correction of HV deformity and can be accurately performed percutaneously.

The lateral fibulotalocalcaneal ligament complex: an ankle stabilizing isometric structure.

PURPOSE: Ankle lateral collateral ligament complex has been the focus of multiple studies. However, there are no specific descriptions of how these ligaments are connected to each other as part of the same complex. The aim of this study was to describe in detail the components of the lateral collateral ligament complex-ATFL and CFL-and determine its anatomical relationships. METHODS: An anatomical study was performed in 32 fresh-frozen below-the-knee ankle specimens. A plane-per-plane anatomical dissection was performed. Overdissecting the area just distal to the inferior ATFL fascicle was avoided to not alter the original morphology of the ligaments and the connecting fibers between them. The characteristics of the ATFL and CFL, as well as any connecting fibers between them were recorded. Measures were obtained in plantar and dorsal flexion, and by two different observers. RESULTS: The ATFL was observed as a two-fascicle ligament in all the specimens. The superior ATFL fascicle was observed intra-articular in the ankle, in contrast to the inferior fascicle. The mean distance measured between superior ATFL fascicle insertions increases in plantar flexion (median 19.2 mm in plantar flexion, and 12.6 mm in dorsal flexion, p < 0.001), while the same measures observed in the inferior ATFL fascicle does not vary (median 10.6 mm in plantar flexion, and 10.6 mm in dorsal flexion, n.s.). The inferior ATFL fascicle was observed with a common fibular origin with the CFL. The CFL distance between insertions does not vary with ankle movement (median 20.1 mm in plantar flexion, and 19.9 mm in dorsal flexion, n.s.). The inferior ATFL fascicle and the CFL were connected by arciform fibers, that were observed as an intrinsic reinforcement of the subtalar joint capsule. CONCLUSION: The superior fascicle of the ATFL is a distinct anatomical structure, whereas the inferior ATFL fascicle and the CFL share some features being both isometric ligaments, having a common fibular insertion, and being connected by arciform fibers, and forming a functional and anatomical entity, that has been named the lateral fibulotalocalcaneal ligament (LFTCL) complex. The clinical relevance of this study is that the superior fascicle of the ATFL is anatomical and functionally a distinct structure from the inferior ATFL fascicle. The superior ATFL fascicle is an intra-articular ligament, that will most probably not be able to heal after a rupture, and a microinstability of the ankle is developed. However, when the LFTCL complex is injured, classical ankle instability resulted. In addition, because of the presence of LFTCL complex, excellent results are observed when an isolated repair of the ATFL is performed even when an injury of both the ATFL and CFL exists.

Minimally invasive surgery for hallux valgus: a systematic review of current surgical techniques.

PURPOSE: The aim of this study was to systematically evaluate the available literature on minimally invasive surgical (MIS) treatment for hallux valgus and to provide an overview of the different surgical techniques. METHODS: A systematic review of the literature available in MEDLINE, EMBASE, and the Cochrane database was performed including studies from January 2001 to 1 January 2018. The radiological outcomes (hallux valgus angle (HVA), intermetatarsal angle (IMA)), complication rates, and clinical outcome scores were evaluated. The MINORS scale was used to assess the methodological quality of included articles. RESULTS: Of 278 reviewed articles, 23 met the inclusion criteria. The included studies reported on the results of 2279 procedures in 1762 patients. The surgical techniques were divided into five categories: the Bosch technique, MIS Chevron-Akin, Reverdin-Isham procedure, Endolog system, and techniques involving distal soft tissue release and fixation. Results regarding radiological correction, clinical outcomes, and complication rate varied widely. CONCLUSIONS: The studies included were of too little level of evidence to allow for data pooling or meta-analysis. There were too few studies on each surgical technique category to assess whether one is more effective than the rest. However, there is some evidence that the Chevron and Akin showed the most potential for improvement of the HVA and the Endolog for the IMA. An overall complication rate of 13% was obtained among all included studies. Appropriately powered randomized controlled trials, utilizing validated outcome measures, blinded assessors, and long-term follow up are needed to assess the efficacy of MIS techniques.

Increasing the safety of minimally invasive hallux surgery-An anatomical study introducing the clock method.

BACKGROUND: The purpose of this study is to describe a simple and reproducible method to localize the neurological structures at risk and to describe a safe zone for hallux minimally invasive surgery (MIS) procedures. METHODS: Ten fresh-frozen cadaveric feet were dissected to identify the dorsomedial digital nerve (DMDN) and the dorsolateral digital nerve (DLDN) of the first toe. Axial sections were performed at the sites of metatarsal osteotomies. We documented the position of the nerves with respect to the extensor hallucis longus (EHL) tendon using a clock method superimposed on the axial section RESULTS: The DMDN was found at an average of 26.2° medial to the medial border of the EHL tendon. (SD 11.26, range 14.5-45.5), whereas the average distance of the DLDN was 32.3° lateral to the medial border of the EHL tendon. (SD 6.29, range 13.5-40). CONCLUSIONS: Using the clock method the DMDN and DLDN were found consistently between 10 o'clock and 2 o'clock in either right and left feet. The clock method may facilitate avoiding the area where these nerves are located serving as a valuable tool in minimally invasive foot surgery.

Vascular Structures of the Lateral Wall of the Maxillary Sinus: A Vascular Labeling Technique.

PURPOSE: Sinus floor augmentation is a common procedure in implant dentistry. However, several intraoperative complications can occur during this procedure, such as bleeding from the lateral wall of the maxillary sinus. The aim of this study was to describe the vascular structures of the lateral wall of the maxillary sinus using a vascular labeling technique. MATERIALS AND METHODS: Ten cadaveric specimens were prepared by the vascular labeling technique. Liquid latex was injected into the large vessels of the head, and the lateral wall of the maxillary sinus was exposed by dissection. The diameter of the vessels and their distance from the alveolar ridge (AR) were recorded. RESULTS: Blood vessels could be observed in all the dissected specimens (100%). The mean distance from the lower edge of the blood vessels to the AR was 18.5 mm (SD 3.31 mm). CONCLUSIONS: The vascular labeling technique detects maxillary sinus vessels in a predictable and effective way. These structures are clinically relevant because they are located in the area where the lateral window is usually created in sinus augmentation procedures and can cause profuse bleeding.

Short-term effects of strain produced on a split palatal screw-type hyrax appliance after rapid maxillary expansion: A clinical trial.

INTRODUCTION: The aim of this study was to establish an accumulated strain pattern in different parts of rapid maxillary expansion appliances and relate them to different vertical growth patterns. A clinical study was conducted of 40 patients with posterior crossbite who required rapid palatal expansion. METHODS: Patients (mean age, 8.48 years) were recruited and treated at the Dental Hospital of Bellvitge, Hospitalet de Llobregat, Barcelona, Spain. Strain gauges were placed on the arms of the RME hyrax screw appliance to record deformation (strain) during the expansion and the retention phases for 75 days. A finite element model was used to place the gauge at the point where the strain was most expressed. The vertical coefficient of variation was used to classify the patients by their vertical growth pattern. P = 0.05 was considered to be statistically significant. RESULTS: During the expansion phase, the highest values of accumulated strain were measured in the posterior part of the appliance for all facial biotypes, but these values passed to the anterior area at the end of the retention phase of the mesocephalic and brachycephalic patients. There was statistically significant difference in the strain of the posterior arms in accordance with the vertical growth pattern (P = 0.05) during the retention phase. At 75 days of retention, 61.25% of the arms had already begun to have strain dissipation. CONCLUSIONS: The accumulated strain pattern in the rapid maxillary expansion appliance can vary depending on the facial biotype. In the future, orthodontists should try to tailor the activation and retention protocol based on each patient's characteristics.

Exclusion of PAX9 and MSX1 mutation in six families affected by tooth agenesis. A genetic study and literature review.

OBJECTIVE: In the present study, it is describe the phenotypical analysis and the mutational screening, for genes PAX9 and MSX1, of six families affected by severe forms of tooth agenesis associated with other dental anomalies and systemic entities. STUDY DESIGN: Six families affected by severe tooth agenesis associated with other dental anomalies and systemic entities were included. Oral exploration, radiological examination, medical antecedents consideration and mutational screening for PAX9 and MSX1 were carried out. RESULTS: No mutations were discovered despite the fact that numerous teeth were missing. An important phenotypical variability was observed within the probands, not being possible to establish a parallelism with the patterns associated to previously described PAX9 and MSX1 mutations. CONCLUSIONS; These results bring us to conclude that probably other genes can determine phenotypical patterns of dental agenesis in the families studied, different than the ones described in the mutations of PAX9 and MSX1. Moreover, epigenetic factors can be involved, as those that can reduce gene dosage and other post-transcriptional modulation agents, causing dental agenesis associated or not with systemic anomalies.

Preload and Removal Torque of Two Different Prosthetic Screw Coatings-A Laboratory Study.

This study aimed to evaluate the effect of two coating materials, a silicone sealing gel and a polytetrafluoroethylene (PTFE) tape, on the screw preload and removal torque value (RTV) to develop strategies to prevent prosthetic screw loosening. We examined 45 complexes comprising an implant, abutment, and prosthetic screw, of which 15 samples were uncoated, 15 were coated with GapSeal® (Hager & Werken GmbH & Co., Duisburg, Germany), and 15 were coated with PTFE tape (MIARCO®, Valencia, Spain). The screws were tightened to register the preload and then untightened to register the RTV. The preload values showed a statistically significant difference only in the PTFE group, suggesting that this lubricant negatively affects the preload. The RTVs showed statistically significant differences among all groups, with the GapSeal® group and PTFE group showing the highest and lowest values, respectively. It can be concluded that the application of the PTFE tape on the screw significantly reduced the preload and RTV. The silicone sealing gel did not affect the preload but increased the RTV. Therefore, the use of GapSeal® should be considered to prevent prosthetic screw loosening, while the use of PTFE tape should be avoided.

Comprehensive Oral Diagnosis and Management for Women with Turner Syndrome.

Turner Syndrome (TS) is a rare genetic disorder that affects females when one of the X chromosomes is partially or completely missing. Due to high genetic and phenotypic variability, TS diagnosis is challenging and is often delayed until adolescence, resulting in poor clinical management. Numerous oral, dental and craniofacial anomalies have been associated with TS, yet a comprehensive description is still lacking. This study addresses this gap through a detailed analysis of oral health and craniofacial characteristics in a cohort of 15 females with TS and their first-degree relatives. Subjects with TS ranged from 3 to 48 years old, none showed evidence of periodontal disease and only the youngest was in mixed dentition. Using the Multifunction System, we identified an aggregation of multiple signs and symptoms in each TS subject, including tooth anomalies (supernumerary molars, agenesis, microdontia, enamel defects, alterations in eruption patterns -advanced and delayed for chronological age-, crowding, rotations and transpositions), malocclusion (class II/1 and II/2) and Class II facial profile, while relatives exhibited fewer manifestations. The early detection of these signs and symptoms is crucial for appropriate referral and the optimal clinical management of TS, especially during the critical period of 9 to 10 years when congenital dental anomalies appear. The use of an established taxonomy to describe these phenotypic features is essential for early detection. Multidisciplinary teams are required to ensure holistic care management in rare diseases like TS.

Moderate and Severe Dental Fluorosis in the Rural Population of Anantapur, India: Change in Their Biological Susceptibility?

Dental fluorosis affects the quality of life. A cross-sectional, observational study was conducted in a community affected by endemic fluorosis for several generations with a conserved biological and social environment. The study included patients from the rural population of Anantapur, India. The Dean index (DI) and the Thylstrup and Fejerskov Index (TFI) were used for fluorosis classification. Additionally, water samples were collected for fluoride analysis, taken from the patients' living areas. The statistical association between the variables was analyzed. In total, 785 patients between 10 and 60 years old were included in the study (58.7% women and 41.3% men). Fluorosis signs were found in 94.6% of patients examined using the DI and 94.4% using the TFI. Moderate-severe dental fluorosis was observed in 62.8% by DI and 73.1% by TFI consuming untreated water with up to 2.9 ppm of fluoride. Furthermore, moderate-severe dental fluorosis was observed in 33.2% by DI and 39.9% by TFI consuming water with ≤1.5 ppm of fluoride. The high prevalence of moderate-severe dental fluorosis in patients consuming water with a low fluoride concentration suggests that other factors are involved. Biological susceptibility change could play an essential role in the severity of dental fluorosis in populations exposed for several generations, affecting its actual and future quality of life.

Body Donation, Teaching, and Research in Dissection Rooms in Spain in Times of Covid-19.

The state of alarm due to Covid-19 pandemic in Spain stopped all educational and most university research activities. The Spanish Anatomical Society (SAE) Consensus Expert Group on Body Donations piloted a study based on a questionnaire to know the status of body donations and dissection activities during the lockdown, as well as the future implications of Covid-19 pandemic for body donation programs and anatomy teaching. The questionnaire results show that Spanish Universities refused body donations and stopped all dissection research and teaching. The Covid-19 expected influence on anatomy teaching was referred to the increase in teaching workforce and resources required to apply the new safety measures to future practical activities, as well as to prepare and adapt teaching material for online-only programs. The application of reinforced safety measures was expected to be perceived by the respondent's students as a gain in teaching quality, while the transformation of the anatomy courses in online-only programs will be perceived as a quality decrease. The respondent's concerns about future institutional implications of the pandemic were related to increased costs of the adaptation of the facilities and the reinforced preventive measures, as well as the eventual decrease in donations. The complete lockdown applied to dissection rooms was not justified by scientific evidence and represented a break of the confidence deposed in the institutions by the donors. A consensus is required for the adoption of a renewed, comprehensive protocol for present and future body donations including the evidence Covid-19 pandemic has contributed to create.

Comparison of the Masticatory Force (with 3D Models) of Complete Denture Base Acrylic Resins with Reline and Reinforcing Materials.

The reinforcement of acrylic denture base remains problematic. Acrylic prosthesis fractures are commonly observed in prosthodontic practice and have not been reliably resolved. This study compared the resistance to masticatory force of acrylic bases of removable complete conventional prosthesis in 3D upper models. Forty acrylic base test specimens containing two types of reinforcement meshes (20 with glass fiber meshes (FIBER-FORCE®- Synca, Bio Composants MédicauxTM, Tullins, France), 20 with metal meshes (DENTAURUM®-Ispringen, Germany)), 20 with a conventional PMMA acrylic base (LUCITONE 199®-Dentsply Sirona, York, PA, USA), and 20 using a permanent soft reline material (MOLLOPLAST-B®-DETAX GmbH & Co. KG, Ettlingen, Germany) were tested-a total of 80 specimens. Half of the specimens were made for a low alveolar ridge and half for a high alveolar ridge. The data were analysed using one-way analysis of variance and Student's t-test for independent test specimens. In the high-alveolar-ridge group, the prosthesis reinforced with the glass fiber mesh was the most resistant to fracture, while in the low-alveolar-ridge group, the non-reinforced prosthesis showed the highest resistance masticatory force. Prostheses with the permanent soft reline material showed the lowest resistance to fracture in both high and low-alveolar-ridge groups. The results show that the selection of the right reinforcement material for each clinical case, based on the height of the alveolar ridge, may help to prevent prosthesis fractures.

Oral findings in Midline Syndrome: a case report and literature review.

We describe a female patient with a midline syndrome. The patient presents agenesis of the corpus callosum, encephalocele, iris coloboma, hypertelorism, submucosal cleft palate and dental anomalies. Despite being very characteristic, her phenotypical traits do not coincide exactly with those reported to date in the literature. The karyotype and the molecular cytogenetic study do not show mutations. We identify the presence of dental anomalies in the mother and other family members, not being identified MSX1 and PAX9 mutations that could the related with their etiology. Despite the fact that dental agenesis has been related to a large number of other malformation syndromes and congenital conditions, dental anomalies have only rarely been mentioned when reporting midline syndromes. These dental phenotypical traits, present in the patient and her family, could be considered part of the midline syndrome in carriers as well as in the patients.

An epidemiological study of dental agenesis in a primary health area in Spain: estimated prevalence and associated factors.

OBJECTIVES: To evaluate the prevalence of dental agenesis and its possible association with other developmental dental anomalies and systemic entities. SETTING AND SAMPLE POPULATION: Descriptive transversal study, for which 1518 clinical records, of patients visited by the Odontological Service of the Primary Health Centre of Cassà de la Selva (Girona-Spain) between December 2002 and February 2006 were reviewed. The data were recorded in relation to the oral and dental anomalies and the associated systemic entities, between the ones referred as concomitant in literature. RESULTS: Values of 9.48% (7.25% excluding the third molars) for dental agenesis and 0.39% for oligodontia were obtained. The presence of dental agenesis concomitant with some other forms of oral and dental anomalies was observed. Attention must be drawn to the fact that a greater number of concomitant systemic entities were observed in those patients that presented a severe phenotypical pattern of dental agenesis. CONCLUSIONS: The results of the present study do not differ from the ones reported in studies of similar characteristics among Occidental and Spanish populations. The relationship observed between certain systemic entities and developmental dental anomalies suggest a possible common genetic etiology.