Characterization of atmospheric aerosol (PM10 and PM2.5) from a medium sized city in São Paulo state, Brazil.

Air pollution causes deleterious effects on human health with aerosols being among the most polluting agents. The objective of this work is the characterization of the PM2.5 and PM10 aerosol mass in the atmosphere. The methods of analysis include WD-XRF and EDS. Data were correlated with meteorological information and air mass trajectories (model HYSPLIT) by multivariate analysis. A morphological structural analysis was also carried out to identify the probable sources of atmospheric aerosols in the city of São José do Rio Preto, Brazil. The mean mass concentration values obtained were 24.54 µg/m3 for PM10, above the WHO annual standard value of 20 µg/m3 and 10.88 µg/m3 for PM2.5 whose WHO recommended limit is 10 µg/m3. WD-XRF analysis of the samples revealed Si and Al as major components of the coarse fraction. In the fine fraction, the major elements were Al and S. The SEM-FEG characterization allowed identifying the morphology of the particles in agglomerates, ellipsoids and filaments in the PM10, besides spherical in the PM2.5. The analysis by EDS corroborated WD-XRF results, identifying the crustal elements, aluminosilicates and elements of anthropogenic origin in the coarse fraction. For the fine fraction crustal elements were also identified; aluminosilicates, black carbon and spherical particles (C and O) originating from combustion processes were predominant. The use of multivariate analysis to correlate air mass trajectories with the results of the morpho-structural characterization of the particulate matter allowed confirmation of the complex composition of the particles resulting from the combination of both local and long-distance sources.

Trace metals and PAHs in topsoils of the University campus in the megacity of São Paulo, Brazil.

The aim of this study is to discuss the concentration distribution, composition and possible sources of trace metals and 13 PAHs in topsoils of the University campus, in the city of São Paulo, the largest city of South America. Mineralogy and granulometry of topsoils (0-10 cm) samples, were determined and As, Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Sb, V, Zn, Hg, Pt, Pd and PAHs concentrations were quantified in the bulk fraction. The average clay content of soils was 221±61.8 g kg-1 and total carbon was low (mean of 25 g kg-1). Concentrations of metals were generally lower than the reference value established by the São Paulo State Environmental Agency and other studies in the São Paulo urban area, except for Cd, Ni, Pb, Cr and Zn. The mean concentration of the sum of 13 PAHs was 0.33 mg kg-1 and fluorene, indeno(1,2,3-cd)pyrene, anthracene, pyrene and benzo(ghi)perylene were the most abundant compounds. PAHs and trace metals variability were constrained in PMF analysis and showed an association with exhaust and non-exhaust vehicular emissions. The results also pointed out a spatial pattern in the campus area related to traffic conditions and intensity and terrain slope.

Influence of sugar cane vinasse on the sorption and degradation of herbicides in soil under controlled conditions.

This study reports the influence of sugar cane vinasse on the persistence, sorption and leaching potential of diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea), hexazinone (3-cyclohexyl-6-(dimethylamino)-1-methyl-1,3,5-triazine-2,4-dione) and tebuthiuron (1-(5-tert-butyl-1,3,4-thiadiazol-2-yl)-1,3-dimethylurea) in both a clay and sandy soil from a tropical area of Brazil. The experiments were conducted out under controlled laboratory conditions. The addition of sugarcane vinasse to soil influenced the persistence and sorption of the herbicides in both the studied clay and sandy soils, with a considerable decrease in the diuron DT50 values in clay soil. The Ground Water Ubiquity Score (GUS) Index classifies the herbicides as leachers in both soils and treatments, with the exception of diuron, which is classified as a non-leacher in clay soil-vinasse and as a transient herbicide in sandy soil. These results suggest that special attention should be given to areas such as those where the sandy soil was collected in this study, which is a recharge area of the Guarani Aquifer and is likely to experience groundwater contamination due to the high leaching potential of the applied pesticides.

Polycyclic Aromatic Hydrocarbons (PAHs) and nitrated analogs associated to particulate matter emission from a Euro V-SCR engine fuelled with diesel/biodiesel blends.

Among the new technologies developed for the heavy-duty fleet, the use of Selective Catalytic Reduction (SCR) aftertreatment system in standard Diesel engines associated with biodiesel/diesel mixtures is an alternative in use to control the legislated pollutants emission. Nevertheless, there is an absence of knowledge about the synergic behaviour of these devices and biodiesel blends regarding the emissions of unregulated substances as the Polycyclic Aromatic Hydrocarbons (PAHs) and Nitro-PAHs, both recognized for their carcinogenic and mutagenic effects on humans. Therefore, the goal of this study is the quantification of PAHs and Nitro-PAHs present to total particulate matter (PM) emitted from the Euro V engine fuelled with ultra-low sulphur diesel and soybean biodiesel in different percentages, B5 and B20. PM sampling was performed using a Euro V - SCR engine operating in European Stationary Cycle (ESC). The PAHs and Nitro-PAHs were extracted from PM using an Accelerated Solvent Extractor and quantified by GC-MS. The results indicated that the use of SCR and the largest fraction of biodiesel studied may suppress the emission of total PAHs. The Toxic Equivalent (TEQ) was lower when using 20% biodiesel, in comparison with 5% biodiesel on the SCR system, reaffirming the low toxicity emission using higher percentage biodiesel. The data also reveal that use of SCR, on its own, suppress the Nitro-PAHs compounds. In general, the use of larger fractions of biodiesel (B20) coupled with the SCR aftertreatment showed the lowest PAHs and Nitro-PAHs emissions, meaning lower toxicity and, consequently, a potential lower risk to human health. From the emission point of view, the results of this work also demonstrated the viability of the Biodiesel programs, in combination with the SCR systems, which does not require any engine adaptation and is an economical alternative for the countries (Brazil, China, Russia, India) that have not adopted Euro VI emission standards.

Residues of organochlorine pesticides and PCBs in some Brazilian municipal solid waste compost.

Persistent organic pollutants (POPs), organochlorine pesticides and polychlorinated biphenyls (PCBs), listed as per the Stockholm Convention (alpha -HCH, beta -HCH, gamma -HCH, p,p'-DDT, o,p'-DDT, p,p'-DDD, p,p'-DDE, aldrin, endrin, dieldrin, PCBs 28, 52, 118, 138, 153, and 180), were analyzed in municipal solid waste (MSW) compost samples from three different Brazilian composting plants located in three São Paulo State cities: Araras, Araraquara and São Paulo (Vila Leopoldinha). Quantitative and qualitative analyses were carried out using gas chromatography electron capture detection (GC-ECD) and gas chromatography mass spectrometry (GC-MS) (Ion Trap, electron impact ionization), respectively. The samples were analyzed in triplicate and the target POPs were not detected by GC-ECD. Twelve pollutants were identified in two samples when qualitative analysis (GC-MS) was used (beta -HCH, gamma -HCH, p,p'-DDT, o,p'-DDT, p,p'-DDD, and p,p'-DDE, PCBs 28, 118, 138, 153 and 180). The composting process has advantages such as urban solid waste reduction and landfill life-span increase, however the MSW compost quality, which can be utilized for agricultural purposes, should be evaluated and be controlled. This kind of study is the first step in making available information to answer questions regarding MSW compost for sustainable agricultural use, such as the pollutants accumulation in soil and in groundwater, and plants uptake.

Validação e aplicação de método para análise de pesticidas em água para consumo humano de Dourados (MS) por CLAE/UV e CG/DTE / Validation and application of method for pesticides analysis in drinking water from Dourados/MS-Brazil) by HPLC-UV and GC-TSD

O uso inadequado de pesticidas na agricultura tem sido apontado como fonte de risco para a saúde humana e para o ambiente. Considerando que os recursos hídricos são os principais destinos desses compostos após a aplicação, este trabalho apresenta a otimização e validação de dois métodos analíticos simples e efi cientes para a determinação de pesticidas em águas superfi ciais e subterrâneas. Foram selecionados os pesticidas mais aplicados no município de Dourados, (Mato Grosso – Brasil) com intensa atividade agrícola. Efetuou-se a pré-concentração por extração em fase sólida com cartucho C18 (500 mg) e eluição com metanol para as amostras analisadas por cromatografi a a líquido de alta eficiência com detector espectrofotométrico na região do ultravioleta (CLAE/UV) (2,4-D e 2,4-DCF) e com acetato de etila:diclorometano (1:1, v/v) para as analisadas por cromatografi a a gás com detector termiônico específi co (CG/DTE) (atrazina, DIA, DEA, trifluralina e parationa metílica). Os métodos apresentaram exatidão (76-107%) e precisão (<12%) satisfatórias para as substâncias nos níveis de fortifi cação selecionados, exceto para DIA (<51%), assim como para o estudo de estabilidade dos pesticidas (-20ºC por até 21 dias). Os limites de quantificação dos métodos (0,22 - 0,48 μg L-1) estão de acordo com a legislação brasileira vigente para pesticidas em água. Embora somente o 2,4-D tenha sido detectado em dois pontos de coleta no período estudado, alerta-se para a necessidade de avaliação sistemática da presença de pesticidas em água para consumo humano, particularmente, em regiões com intensa atividade agrícola. Tal monitoramento pode fornecer subsídios para políticas públicas ambientais.