Interactions between Ionic Cellulose Derivatives Recycled from Textile Wastes and Surfactants: Interfacial, Aggregation and Wettability Studies.

Interactions between polymers (P) and surfactants (S) in aqueous solution lead to interfacial and aggregation phenomena that are not only of great interest in physical chemistry but also important for many industrial applications, such as the development of detergents and fabric softeners. Here, we synthesized two ionic derivatives-sodium carboxymethylcellulose (NaCMC) and quaternized cellulose (QC)-from cellulose recycled from textile wastes and then explored the interactions of these polymers with assorted surfactants-cationic (CTAB, gemini), anionic (SDS, SDBS) and nonionic (TX-100)-commonly used in the textile industry. We obtained surface tension curves of the P/S mixtures by fixing the polymer concentration and then increasing the surfactant concentration. In mixtures where polymer and surfactant are oppositely charged (P-/S+ and P+/S-), a strong association is observed, and from the surface tension curves, we determined the critical aggregation concentration (cac) and critical micelle concentration in the presence of polymer (cmcp). For mixtures of similar charge (P+/S+ and P-/S-), virtually no interactions are observed, with the notable exception of the QC/CTAB system, which is much more surface active than the neat CTAB. We further investigated the effect of oppositely charged P/S mixtures on hydrophilicity by measuring the contact angles of aqueous droplets on a hydrophobic textile substrate. Significantly, both P-/S+ and P+/S- systems greatly enhance the hydrophilicity of the substrate at much lower surfactant concentrations than the surfactant alone (in particular in the QC/SDBS and QC/SDS systems).

Stimuli-Sensitive Self-Assembled Tubules Based on Lysine-Derived Surfactants for Delivery of Antimicrobial Proteins.

Drug delivery vectors based on amphiphiles have important features such as versatile physicochemical properties and stimuli-responsiveness. Amino acid-based surfactants are especially promising amphiphiles due to their enhanced biocompatibility compared to conventional surfactants. They can self-organize into micelles, vesicles and complex hierarchical structures, such as fibers, twisted and coiled ribbons, and tubules. In this work, we investigated the self-assembly and drug loading properties of a family of novel anionic double-tailed lysine-derived surfactants, with variable degree of tail length mismatch, designated as mLys10 and 10Lysn, where m and n are the number of carbon atoms in the tails. These surfactants form tubular aggregates with assorted morphologies in water that undergo gelation due to dense entanglement, as evidenced by light and electron microscopy. Lysozyme (LZM), an enzyme with antimicrobial properties, was selected as model protein for loading. After the characterization of the interfacial properties and phase behavior of the amphiphiles, the LZM-loading ability of the tubules was investigated, under varying experimental conditions, to assess the efficiency of the aggregates as pH- and temperature-sensitive nanocarriers. Further, the toxicological profile of the surfactants per se and surfactant/LZM hydrogels was obtained, using human skin fibroblasts (BJ-5ta cell line). Overall, the results show that the tubule-based hydrogels exhibit very interesting properties for the transport and controlled release of molecules of therapeutic interest.

Formation of catanionic vesicles by threonine-derived surfactants and gemini surfactants based on conventional or serine-derived headgroups: designing versatile and cytocompatible nanocarriers.

In this work, we explore the ability of newly synthesized threonine-derived surfactants to form robust, versatile and cytocompatible catanionic vesicles when mixed with gemini surfactants, as potential effective nanocarriers for biomolecules. The threonine surfactants consist of single-tailed amphiphiles with carboxylate headgroups and varying alkyl tail length, CnThr, where n is the (even) number of tail C atoms, varying from 8 to 16. After an initial characterization of the micellization behavior of the neat CnThr surfactants (at pH = 7 and 12), the dodecyl derivative, C12Thr, was selected as the optimal surfactant to investigate regions of formation of spontaneous catanionic vesicles. Phase behavior studies and microstructural characterization of mixtures involving both conventional bis-quat n-s-n gemini (where n and s are the tail and spacer number of C atoms) and biocompatible serine-derived gemini surfactants were carried out. Light and electron microscopy, dynamic light scattering and zeta potential measurements show spontaneous vesicles indeed form and exhibit versatile features in terms of average size, morphology, polydispersity, surface charge and pH. The toxicological profile of the neat surfactants and C12Thr/gemini vesicles based on MTT assays with a L929 cell line was also evaluated, showing good levels of in vitro cytocompatibility. Overall, the assortment of developed catanionic vesicles offers very attractive physicochemical and biological features to be explored for delivery purposes.

Building on Surface-Active Ionic Liquids for the Rescuing of the Antimalarial Drug Chloroquine.

Ionic liquids derived from classical antimalarials are emerging as a new approach towards the cost-effective rescuing of those drugs. Herein, we disclose novel surface-active ionic liquids derived from chloroquine and natural fatty acids whose antimalarial activity in vitro was found to be superior to that of the parent drug. The most potent ionic liquid was the laurate salt of chloroquine, which presented IC50 values of 4 and 110 nM against a chloroquine-sensitive and a chloroquine-resistant strain of Plasmodium falciparum, respectively, corresponding to an 11- and 6-fold increase in potency as compared to the reference chloroquine bisphosphate salt against the same strains. This unprecedented report opens new perspectives in both the fields of malaria chemotherapy and of surface-active ionic liquids derived from active pharmaceutical ingredients.

Temperature-responsive self-assembled nanostructures from lysine-based surfactants with high chain length asymmetry: from tubules and helical ribbons to micelles and vesicles.

Stimuli-sensitive self-assembled nanostructures are of great relevance for the templating of nanomaterials and the design of efficient systems for the controlled delivery of molecules. Amino acid-based surfactants often display such fascinating self-assembly due to a combination of molecular features such as critical packing parameter, chirality and H-bonding interactions. Herein, we focus on a family of newly synthesized double-chained alkylcarboxylates derived from l-lysine, and designated by 8Lysn, mLys8, with n, m = 12, 14 and 16, and 12Lys16 and 16Lys12, where the numbers represent the number of C atoms in each hydrocarbon chain. The effects of the chain length asymmetry and structural isomerism of the surfactants on their interfacial properties, thermal behavior and self-assembly in water were investigated by a comprehensive toolbox, including surface tension, DSC, imaging (light microscopy, SEM, TEM and AFM) and SAXS. All the surfactants below their Krafft temperature self-organize into tubular structures of various morphologies (flat structures, twisted and coiled ribbons and hollow tubes), forming hydrogels at low surfactant concentration. Upon the solubilization phase transition, micelles or vesicles are formed depending on the surfactant structure, and the tubule-micelle or tubule-vesicle transition is thermoreversible. A molecular-level rationalization of the observed self-assembly and phase transition features is put forth.

Block Copolymers as Dispersants for Single-Walled Carbon Nanotubes: Modes of Surface Attachment and Role of Block Polydispersity.

When using amphiphilic polymers to exfoliate and disperse carbon nanotubes in water, the balance between the hydrophobic and hydrophilic moieties is critical and nontrivial. Here, we investigate the mode of surface attachment of a triblock copolymer, Pluronics F127, composed of a central hydrophobic polypropylene oxide block flanked by hydrophilic polyethylene oxide blocks, onto single-walled carbon nanotubes (SWNTs). Crucially, we analyze the composition in dispersant of both the as-obtained dispersion (the supernatant) and the precipitate-containing undispersed materials. For this, we combine the carefully obtained data from 1H NMR peak intensities and self-diffusion and thermogravimetric analysis. The molecular motions behind the observed NMR features are clarified. We find that the hydrophobic blocks attach to the dispersed SWNT surface and remain significantly immobilized leading to 1H NMR signal loss. On the other hand, the hydrophilic blocks remain highly mobile and thus readily detectable by NMR. The dispersant is shown to possess significant block polydispersity that has a large effect on dispersibility. Polymers with large hydrophobic blocks adsorb on the surface of the carbonaceous particles that precipitate, indicating that although a larger hydrophobic block is good for enhancing adsorption, it may be less effective in dispersing the tubes. A model is also proposed that consistently explains our observations in SWNT dispersions and some contradicting findings obtained previously in carbon nanohorn dispersions. Overall, our findings help elucidating the molecular picture of the dispersion process for SWNTs and are of interest when looking for more effective (i.e., well-balanced) polymeric dispersants.

Interplay between bulk self-assembly, interfacial and foaming properties in a catanionic surfactant mixture of varying composition.

The self-aggregation, surface properties and foamability of the catanionic surfactant mixture cetyltrimethylammonium bromide (CTAB)/sodium octyl sulfonate (SOSo) have been investigated to obtain insight on the relation between bulk nanostructures, surfactant packing, and foam stability and aging. Light microscopy, SANS, cryo-TEM, DLS, surface tension, rheometry and direct photography were used to characterize mixtures with varying CTAB molar fraction, xCTAB. In the bulk, self-assembly is richer in the excess CTAB region than in the excess SOSo one. Starting from neat CTAB micelles and on addition of anionic surfactant, there is a change from small ellipsoidal micelles (1 < xCTAB ≤ 0.80) to large rodlike micelles (0.65 ≤ xCTAB ≤ 0.55) and then to vesicles (0 < xCTAB ≤ 0.50), with coexistence regions in between; SOSo-rich mixtures are thus dominated by vesicles. High size polydispersity for the micelles and vesicles is an intrinsic feature of this system. Foam stability is concomitantly impacted by xCTAB. SOSo is a small mobile molecule and so it disrupts foam stability, irrespective of the presence of vesicles. Foams are thus only stable in the CTAB-rich regions, and SANS shows that the shape of micelles and vesicles is unchanged inside the foam. Foam drainage is thereby mostly controlled by the presence of the elongated micelles through the solution viscosity, whereas coarsening is influenced by dense surfactant packing at the gas-liquid interfaces.

Size, charge, and stability of fully serine-based catanionic vesicles: towards versatile biocompatible nanocarriers.

Vesicles based on mixed cationic and anionic surfactants (catanionic vesicles) offer a number of advantageous colloidal features over conventional lipid-based vesicles, namely spontaneity in formation, long-term stability, and easy modulation of size and charge. If biocompatibility is added through rational design of the chemical components, the potential for biorelated applications further emerges. Here, we report for the first time on two catanionic vesicle systems in which both ionic amphiphiles are derivatized from the same amino acid--serine--with the goal of enhancing aggregate biocompatibility. Phase behavior maps for a mixture with chain length symmetry, 12Ser/12-12Ser, and another with asymmetry, 16Ser/8-8Ser, are presented, for which regions of vesicles, micelles, and coexisting aggregates are identified. For the asymmetric mixture, detailed phase behavior and microstructure characterization have been carried out based on surface tension, light microscopy, cryo-SEM, cryo-TEM, and dynamic light scattering analysis. Vesicles are found with tunable mean size, pH, and zeta potential. Changes in aggregate shape with varying composition and the effect of preparation methods and aging on vesicle features and stability have been investigated in detail. The results are discussed in the light of self-assembly models and related catanionic systems reported before. A versatile system of robust vesicles is thus presented for potential applications.

Gemini surfactants mediate efficient mitochondrial gene delivery and expression.

Gene delivery targeting mitochondria has the potential to transform the therapeutic landscape of mitochondrial genetic diseases. Taking advantage of the nonuniversal genetic code used by mitochondria, a plasmid DNA construct able to be specifically expressed in these organelles was designed by including a codon, which codes for an amino acid only if read by the mitochondrial ribosomes. In the present work, gemini surfactants were shown to successfully deliver plasmid DNA to mitochondria. Gemini surfactant-based DNA complexes were taken up by cells through a variety of routes, including endocytic pathways, and showed propensity for inducing membrane destabilization under acidic conditions, thus facilitating cytoplasmic release of DNA. Furthermore, the complexes interacted extensively with lipid membrane models mimicking the composition of the mitochondrial membrane, which predicts a favored interaction of the complexes with mitochondria in the intracellular environment. This work unravels new possibilities for gene therapy toward mitochondrial diseases.

Dispersing Carbon Nanotubes with Ionic Surfactants under Controlled Conditions: Comparisons and Insight.

A fundamental understanding of the mechanisms involved in the surfactant-assisted exfoliation and dispersion of carbon nanotubes (CNTs) in water calls for well-controlled experimental methodologies and reliable comparative metrics. We have assessed the ability of several ionic surfactants to disperse single and multiwalled carbon nanotubes, resorting to a stringently controlled sonication-centrifugation method for the preparation of the dispersions. The CNT concentration was accurately measured for a wide range of surfactant concentration, using combined thermogravimetric analysis and UV-vis spectroscopy. The obtained dispersibility curves yield several quantitative parameters, which in turn allow for the effects of nanotube morphology and surfactant properties (aromatic rings, chain length, headgroup charge, and cmc) to be assessed and rationalized, both in terms of dispersed nanotube mass and surface area. The data also indicate that the CNT-surfactant association follows patterns that are markedly different from other equilibrium processes governed by hydrophobicity (such as micellization); in particular, the surfactant concentration needed for maximum dispersibility, c(s,max), and the number of surfactant molecules per unit CNT area at c(s,max) are shown to depend linearly on chain length. The results further suggest that the presence of micelles in the exfoliation process is not a key factor either for starting CNT dispersibility or attaining its saturation value.

Serine-based gemini surfactants with different spacer linkages: from self-assembly to DNA compaction.

Cationic gemini surfactants have strong potential as compaction agents of nucleic acids for efficient non-viral gene delivery. In this work, we present the aggregation behavior of three novel cationic serine-based gemini surfactants as well as their ability to compact DNA per se and mixed with a helper lipid, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE). All the surfactants have a 12-12-12 configuration, i.e. two main 12-carbon alkyl chains linked to the nitrogen atom of the amino acid residue and a 12 methylene spacer, but they differ in the nature of the spacer linkage: for (12Ser)2N12, an amine bond; for (12Ser)2CON12, an amide bond; and for (12Ser)2COO12, an ester bond. Interestingly, while the amine-based gemini aggregates into micelles, the amide and ester ones spontaneously form vesicles, which denotes a strong influence of the type of linkage on the surfactant packing parameter. The size, ζ-potential and stability of the vesicles have been characterized by light microscopy, cryogenic scanning electron microscopy (cryo-SEM) and dynamic light scattering (DLS). The interaction of the gemini aggregates with DNA at different charge ratios and in the absence and presence of DOPE has been studied by DLS, fluorescence spectroscopy and cryo-SEM. All the compounds are found to efficiently compact DNA (complexation > 90%), but relevant differences are obtained in terms of the size, ζ-potential and stability of the lipoplexes formed. Results are rationalized in terms of headgroup differences and the type of aggregates present prior to DNA condensation.

Recent advances in in vitro models simulating the female genital tract toward more effective intravaginal therapeutic delivery.

INTRODUCTION: Intravaginal drug delivery has emerged as a promising avenue for treating a spectrum of systemic and local female genital tract (FGT) conditions, using biomaterials as carriers or scaffolds for targeted and efficient administration. Much effort has been made to understand the natural barriers of this route and improve the delivery system to achieve an efficient therapeutic response. AREAS COVERED: In this review, we conducted a comprehensive literature search using multiple databases (PubMed Scopus Web of Science Google Scholar), to discuss the potential of intravaginal therapeutic delivery, as well as the obstacles unique to this route. The in vitro cell models of the FGT and how they can be applied to probing intravaginal drug delivery are then analyzed. We further explore the limitations of the existing models and the possibilities to make them more promising for delivery studies or biomaterial validation. Complementary information is provided by in vitro acellular techniques that may shed light on mucus-drug interaction. EXPERT OPINION: Advances in 3D models and cell cultures have enhanced our understanding of the FGT, but they still fail to replicate all variables. Future research should aim to use complementary methods, ensure stability, and develop consistent protocols to improve therapy evaluation and create better predictive in vitro models for women's health.

Ternary (molybdenum disulfide/graphene)/carbon nanotube nanocomposites assembled via a facile colloidal electrostatic path as electrocatalysts for the oxygen reduction reaction: Composition and nitrogen-doping play a key role in their performance.

Nanocomposites have garnered attention for their potential as catalysts in electrochemical reactions vital for technologies like fuel cells, water splitting, and metal-air batteries. This work focuses on developing three-dimensional (3D) nanocomposites through aqueous phase exfoliation, non-covalent functionalization of building blocks with surfactants and polymers, and electrostatic interactions in solution leading to the nanocomposites assembly and organization. By combining molybdenum disulfide (MoS2) layers with graphene nanoplatelets (GnPs) to form a binary 2D composite (MoS2/GnP), and subsequently incorporating multiwalled carbon nanotubes (MWNTs) to create ternary 3D composites, we explore their potential as catalysts for the oxygen reduction reaction (ORR) critical in fuel cells. Characterization techniques such as X-ray photoelectron spectroscopy, scanning electron microscopy, and X-ray diffraction elucidate material composition and structure. Our electrochemical studies reveal insights into the kinetics of the reactions and structure-activity relationships. Both the (MoS2/GnP)-to-MWNT mass ratio and nitrogen-doping of GnPs (N-GnPs) play a key role on the electrocatalytic ORR performance. Notably, the (MoS2/N-GnP)/MWNT material, with a 3:1 mass ratio, exhibits the most effective ORR activity. All catalysts demonstrate good long-term stability and methanol crossover tolerance. This facile fabrication method and observed trends offer avenues for optimizing composite electrocatalysts further.

Cationic Serine-Based Gemini Surfactant:Monoolein Aggregates as Viable and Efficacious Agents for DNA Complexation and Compaction: A Cytotoxicity and Physicochemical Assessment.

Cationic gemini surfactants have emerged as potential gene delivery agents as they can co-assemble with DNA due to a strong electrostatic association. Commonly, DNA complexation is enhanced by the inclusion of a helper lipid (HL), which also plays a key role in transfection efficiency. The formation of lipoplexes, used as non-viral vectors for transfection, through electrostatic and hydrophobic interactions is affected by various physicochemical parameters, such as cationic surfactant:HL molar ratio, (+/-) charge ratio, and the morphological structure of the lipoplexes. Herein, we investigated the DNA complexation ability of mixtures of serine-based gemini surfactants, (nSer)2N5, and monoolein (MO) as a helper lipid. The micelle-forming serine surfactants contain long lipophilic chains (12 to 18 C atoms) and a five CH2 spacer, both linked to the nitrogen atoms of the serine residues by amine linkages. The (nSer)2N5:MO aggregates are non-cytotoxic up to 35-90 µM, depending on surfactant and surfactant/MO mixing ratio, and in general, higher MO content and longer surfactant chain length tend to promote higher cell viability. All systems efficaciously complex DNA, but the (18Ser)2N5:MO one clearly stands as the best-performing one. Incorporating MO into the serine surfactant system affects the morphology and size distribution of the formed mixed aggregates. In the low concentration regime, gemini-MO systems aggregate in the form of vesicles, while at high concentrations the formation of a lamellar liquid crystalline phase is observed. This suggests that lipoplexes might share a similar bilayer-based structure.

Morphological and nanomechanical behavior of supported lipid bilayers on addition of cationic surfactants.

The addition of surfactants to lipid bilayers is important for the modulation of lipid bilayer properties (e.g., in protein reconstitution and development of nonviral gene delivery vehicles) and to provide insight on the properties of natural biomembranes. In this work, the thermal behavior, organization, and nanomechanical stability of model cationic lipid-surfactant bilayers have been investigated. Two different cationic surfactants, hexadecyltrimethylammonium bromide (CTAB) and a novel derivative of the amino acid serine (Ser16TFAc), have been added (up to 50 mol %) to both liposomes and supported lipid bilayers (SLBs) composed by the zwitterionic phospholipid DPPC. The thermal phase behavior of mixed liposomes has been probed by differential scanning calorimetry (DSC), and the morphology and nanomechanical properties of mixed SLBs by atomic force microscopy-based force spectroscopy (AFM-FS). Although DSC thermograms show different results for the two mixed liposomes, when both are deposited on mica substrates similar trends on the morphology and the mechanical response of the lipid-surfactant bilayers are observed. DSC thermograms indicate microdomain formation in both systems, but while CTAB decreases the degree of organization on the liposome bilayer, Ser16TFAc ultimately induces the opposite effect. Regarding the AFM-FS studies, they show that microphase segregation occurs for these systems and that the effect is dependent on the surfactant content. In both SLB systems, different microdomains characterized by their height and breakthrough force Fb are formed. The molecular organization and composition is critically discussed in the light of our experimental results and literature data on similar lipid-surfactant systems.

Light and pH responsive catanionic vesicles based on a chalcone/flavylium photoswitch for smart drug delivery: From molecular design to the controlled release of doxorubicin.

Spatially and temporally localized delivery is a promising strategy to circumvent adverse effects of traditional drug therapy such as drug toxicity and prolonged treatments. Stimuli-responsive colloidal nanocarriers can be crucial to attain such goals. Here, we develop a delivery system based on dual light and pH responsive vesicles having a cationic bis-quat gemini surfactant, 12-2-12, and a negatively charged amphiphilic chalcone, C4SCh. The premise is to exploit the chalcone/flavylium interconversion to elicit a morphological change of the vesicles leading to the controlled release of an encapsulated drug. First, the phase behavior of the catanionic system is studied and the desirable composition yielding stable unilamellar vesicles identified and selected for further studies. The solutions containing vesicles (Dh ≈ 200 nm, ζ-potential ≈ 80 mV) are in-depth characterized by light microscopy, cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS) and surface tension measurements. Upon subjecting the vesicles to UV irradiation (λ = 365 nm) at near neutral pH (≈ 6.0), no morphological effects are observed, yet when irradiation is coupled with pH = 3.0, the majority of the vesicles are disrupted into bilayer fragments. The anticancer drug doxorubicin (DOX) is successfully entrapped in the non-irradiated vesicles, yielding an encapsulation efficiency of ≈ 25% and a loading capacity of ≈ 3%. The release profile of the drug-loaded vesicles is then studied in vitro in four conditions: i) no stimuli (pH = 6.0); ii) irradiation, pH = 6.0; iii) no irradiation and adjusted pH = 3.0; iv) irradiation and adjusted pH = 3.0 Crucially, irradiation at pH = 3.0 leads to a sustained release of DOX to ca. 80% (within 4 h), whereas cases i) and ii) lead to only ≈ 25 % release and case iii) to 50% release but precipitation of the vesicles. Thus, our initial hypothesis is confirmed: we present a proof of concept delivery system where light and pH act as inputs of an AND logic gate mechanism for the controlled release of a relevant biomedical drug (output). This may prove useful if the irradiated nanocarriers meet acidified physiological environments such as tumors sites, endosomes or lysosomes.

Model Catanionic Vesicles from Biomimetic Serine-Based Surfactants: Effect of the Combination of Chain Lengths on Vesicle Properties and Vesicle-to-Micelle Transition.

Mixtures of cationic and anionic surfactants often originate bilayer structures, such as vesicles and lamellar liquid crystals, that can be explored as model membranes for fundamental studies or as drug and gene nanocarriers. Here, we investigated the aggregation properties of two catanionic mixtures containing biomimetic surfactants derived from serine. The mixtures are designated as 12Ser/8-8Ser and 14Ser/10-10Ser, where mSer is a cationic, single-chained surfactant and n-nSer is an anionic, double-chained one (m and n being the C atoms in the alkyl chains). Our goal was to investigate the effects of total chain length and chain length asymmetry of the catanionic pair on the formation of catanionic vesicles, the vesicle properties and the vesicle/micelle transitions. Ocular observations, surface tension measurements, video-enhanced light microscopy, cryogenic scanning electron microscopy, dynamic and electrophoretic light scattering were used to monitor the self-assembly process and the aggregate properties. Catanionic vesicles were indeed found in both systems for molar fractions of cationic surfactant ≥0.40, always possessing positive zeta potentials (ζ = +35-50 mV), even for equimolar sample compositions. Furthermore, the 14Ser/10-10Ser vesicles were only found as single aggregates (i.e., without coexisting micelles) in a very narrow compositional range and as a bimodal population (average diameters of 80 and 300 nm). In contrast, the 12Ser/8-8Ser vesicles were found for a wider sample compositional range and as unimodal or bimodal populations, depending on the mixing ratio. The aggregate size, pH and zeta potential of the mixtures were further investigated. The unimodal 12Ser/8-8Ser vesicles ( ≈ 250 nm, pH ≈ 7-8, ζ ≈ +32 mV and a cationic/anionic molar ratio of ≈2:1) are particularly promising for application as drug/gene nanocarriers. Both chain length asymmetry and total length play a key role in the aggregation features of the two systems. Molecular insights are provided by the main findings.

Gemini surfactant dimethylene-1,2-bis(tetradecyldimethylammonium bromide)-based gene vectors: a biophysical approach to transfection efficiency.

Cationic liposomes have been proposed as biocompatible gene delivery vectors, able to overcome the barriers imposed by cell membranes. Besides lipids, other surfactant molecules have been successfully used in the composition of gene carriers. In the present work, we used a Gemini surfactant, represented by the general structure [C(14)H(29)(CH(3))(2)N(+)(CH(2))(2)N(+)(CH(3))(2)C(14)H(29)]2Br(-) and herein designated 14-2-14, to prepare cationic gene carriers, both as the sole component and in combination with neutral helper lipids, cholesterol and DOPE. The effectiveness of three Gemini-based formulations, namely neat 14-2-14, 14-2-14:Chol (1:1 molar ratio) and 14-2-14:Chol:DOPE (2:1:1 molar ratio), to mediate gene delivery was evaluated in DNA mixtures of +/- charge ratios ranging from 1/1 to 12/1. After ruling out cytotoxicity as responsible for the differences observed in the transfection competence, structural and physical properties of the vector were investigated, using several techniques. The size and surface charge density (zeta potential) of surfactant-based structures were determined by conventional techniques and the thermotropic behaviour of aqueous dispersions of surfactant/lipid/DNA formulations was monitored by fluorescence polarization of DPH and DPH-PA probes. The capacity of lipoplexes to interact with membrane-mimicking lipid bilayers was evaluated, using the PicoGreen assay and a FRET technique. Our data indicate inefficiency of the neat 14-2-14 formulation for gene delivery, which could result from the large dimensions of the particles and/or from its relative incompetence to release DNA upon interaction with anionic lipids. The addition of cholesterol or cholesterol and DOPE conferred to Gemini-based gene carrier transfection activity at specific ranges of +/- charge ratios. Fluorescence polarization data suggest that an order parameter within a specific range was apparently needed for complexes to display maximal transfection efficiency. The transfection-competent formulations showed to be efficiently destabilized by interaction with different anionic and zwitterionic bilayers, including those containing PS and cardiolipin. These data are discussed in terms of the potential of these formulations to address different intracellular targets.

Recycling of textile wastes, by acid hydrolysis, into new cellulosic raw materials.

Chemical recycling can be used to separate fibers that are constituents of different types of fabrics. This type of process can be considered one of the most effective forms of recycling, given that a large part of fabrics is made up of fiber mixtures. As part of an innovative circular strategy, the main goal of this work was to study the conditions for extracting cellulose from mixed textile wastes by acid hydrolysis and further transform it into cellulose derivatives, thus contributing to reduce such wastes and expanding the possible sources of cellulose. Our work covers a wide range of textile wastes and addresses the main technical challenges of this recycling methodology. The percentage of recovered cellulose powder varies between 65 and 88%. To evaluate the feasibility of using the extracted cellulose as raw material to produce cellulose derivatives, two strategies were applied: etherification to obtain sodium carboxymethylcellulose (with degree of substituion between 0.27 and 0.61) and esterification, to obtain cellulose acetate (with degree of substituion of 2.59). The cellulose derivatives obtained are very useful as additives in the textile industry, and hence the concept and practice of a circular economy are promoted.

A critical assessment of the role of ionic surfactants in the exfoliation and stabilization of 2D nanosheets: The case of the transition metal dichalcogenides MoS2, WS2 and MoSe2.

Transition metal dichalcogenides (TMDs), like other two-dimensional layered materials beyond graphene, have gained enormous interest in recent years owing to their distinct electronic and optical properties, and potential applicability in areas such as sensing, nanoelectronics and catalysis. Surfactant-assisted exfoliation is commonly used to prepare aqueous dispersions of TMD nanosheets, but a clear picture of the TMD and surfactant features that influence the dispersion process is still lacking. In this work, we present a systematic study of the dispersibility of MoS2, WS2 and MoSe2 in aqueous medium using a cationic (cetyltrimethylammonium bromide, CTAB) and an anionic (sodium cholate, SC) dispersant, in a wide concentration range (seven orders of magnitude) and resorting to a carefully controlled sonication-centrifugation procedure. We present detailed, high precision dispersibility curves (concentration of dispersed TMD versus concentration of surfactant used), together with zeta potential and pH measurements, allowing insight into the influence of the type of metal and chalcogen, surfactant charge and surfactant concentration, on the effectiveness of the exfoliation and stabilization. The metal (Mo vs. W) influences the dispersibility at low surfactant concentrations, while the chalcogen (S vs. Se) plays a more significant role as the surfactant concentration is increased, alongside the surfactant charge. Structural characterization by scanning electron microscopy (SEM), Raman spectroscopy and atomic force microscopy (AFM) shows that the methodology applied yields well-exfoliated nanosheets with controlled mean lateral dimension (≈ 100 nm) and thickness (≤5 layers). Finally, the type of ionic surfactant (cationic vs. anionic) and its concentration play a pivotal role in the profile of the dispersibility curves, leading us to propose two types of master curves with distinct regions of phase behavior.