Cs3Cu4In2Cl13 Nanocrystals: A Perovskite-Related Structure with Inorganic Clusters at A Sites.

An effort to synthesize the Cu(I) variant of a lead-free double perovskite isostructural with Cs2AgInCl6 resulted in the formation of Cs3Cu4In2Cl13 nanocrystals with an unusual structure, as revealed by single-nanocrystal three-dimensional electron diffraction. These nanocrystals adopt a A2BX6 structure (K2PtCl6 type, termed vacancy ordered perovskite) with tetrahedrally coordinated Cu(I) ions. In the structure, 25% of the A sites are occupied by [Cu4Cl]3+ clusters (75% by Cs+), and the B sites are occupied by In3+. Such a Cs3Cu4In2Cl13 compound prepared at the nanoscale is not known in the bulk and is an example of a multinary metal halide with inorganic cluster cations residing in A sites. The stability of the compound was supported by density functional theory calculations that also revealed that its bandgap is direct but parity forbidden. The existence of the Cs3Cu4In2Cl13 structure demonstrates that small inorganic cluster cations can occupy A sites in multinary metal halides.

Carbon Dots from Citric Acid and its Intermediates Formed by Thermal Decomposition.

Thermal decomposition of citric acid is one of the most common synthesis methods for fluorescent carbon dots; the reaction pathway is, however, quite complex and the details are still far from being understood. For instance, several intermediates form during the process and they also give rise to fluorescent species. In the present work, the formation of fluorescent C-dots from citric acid has been studied as a function of reaction time by coupling infrared analysis, X-ray photoelectron spectroscopy, liquid chromatography/mass spectroscopy (LC/MS) with the change of the optical properties, absorption and emission. The reaction intermediates, which have been identified at different stages, produce two main emissive species, in the green and blue, as also indicated by the decay time analysis. C-dots formed from the intermediates have also been synthesised by thermal decomposition, which gave an emission maximum around 450 nm. The citric acid C-dots in water show short temporal stability, but their functionalisation with 3-aminopropyltriethoxysilane reduces the quenching. The understanding of the citric acid thermal decomposition reaction is expected to improve the control and reproducibility of C-dots synthesis.

Fe2+ Deficiencies, FeO Subdomains, and Structural Defects Favor Magnetic Hyperthermia Performance of Iron Oxide Nanocubes into Intracellular Environment.

Herein, by studying a stepwise phase transformation of 23 nm FeO-Fe3O4 core-shell nanocubes into Fe3O4, we identify a composition at which the magnetic heating performance of the nanocubes is not affected by the medium viscosity and aggregation. Structural and magnetic characterizations reveal the transformation of the FeO-Fe3O4 nanocubes from having stoichiometric phase compositions into Fe2+-deficient Fe3O4 phases. The resultant nanocubes contain tiny compressed and randomly distributed FeO subdomains as well as structural defects. This phase transformation causes a 10-fold increase in the magnetic losses of the nanocubes, which remain exceptionally insensitive to the medium viscosity as well as aggregation unlike similarly sized single-phase magnetite nanocubes. We observe that the dominant relaxation mechanism switches from Néel in fresh core-shell nanocubes to Brownian in partially oxidized nanocubes and once again to Néel in completely treated nanocubes. The Fe2+ deficiencies and structural defects appear to reduce the magnetic energy barrier and anisotropy field, thereby driving the overall relaxation into Néel process. The magnetic losses of these nanoparticles remain unchanged through a progressive internalization/association to ovarian cancer cells. Moreover, the particles induce a significant cell death after being exposed to hyperthermia treatment. Here, we present the largest heating performance that has been reported to date for 23 nm iron oxide nanoparticles under intracellular conditions. Our findings clearly demonstrate the positive impacts of the Fe2+ deficiencies and structural defects in the Fe3O4 structure on the heating performance into intracellular environment.

Ultrasound-activated piezoelectric P(VDF-TrFE)/boron nitride nanotube composite films promote differentiation of human SaOS-2 osteoblast-like cells.

Piezoelectric films of poly(vinylidenedifluoride-trifluoroethylene) (P(VDF-TrFE)) and of P(VDF-TrFE)/boron nitride nanotubes (BNNTs) were prepared by cast-annealing and used for SaOS-2 osteoblast-like cell culture. Films were characterized in terms of surface and bulk features, and composite films demonstrated enhanced piezoresponse compared to plain polymeric films (d31 increased by ~80%). Osteogenic differentiation was evaluated in terms of calcium deposition, collagen I secretion, and transcriptional levels of marker genes (Alpl, Col1a1, Ibsp, and Sparc) in cells either exposed or not to ultrasounds (US); finally, a numerical model suggested that the induced voltage (~20-60 mV) is suitable for cell stimulation. Although preliminary, our results are extremely promising and encourage the use of piezoelectric P(VDF-TrFE)/BNNT films in bone tissue regeneration.

Assembly of Branched Colloidal Nanocrystals in Polymer Films Leads to Enhanced Viscous Deformation Resistance.

Progress in the integration of nanocrystals with polymers has enabled the creation of materials for applications ranging from photovoltaics to biosensing. However, controlling the nanocrystal segregation and aggregation in the polymer phase remains a challenging task, especially because nanocrystals tend to form amorphous clusters inside the polymer matrix. Here, we present the ability of octapod-shaped particles to overcome their strong entropy-driven tendency to aggregate disorderly and form instead centipede-like linear arrays that are randomly oriented and fully embedded in polystyrene films upon controlled solvent evaporation. This behavior cannot be entirely described by short-range van der Waals interactions between the octapods in the polymer solution. An important role here is played by the increment of the viscosity of the medium during the evaporation of the solvent, which prevents disaggregation of the chains once they are formed. We show that increasing the octapod loading in the blends does not impact the length of the linear arrays beyond a critical length, while it favors instead chain demixing to form self-segregated regions of parallel interlocked chains. Our experiments evidence that softening of the polymer matrix by ex situ heating of the films induces a tail-to-tail coupling of the preformed chains and leads to the formation of longer linear structures of octapods, up to 2 µm long. The presence of 1D arrays of octapods in free-standing polystyrene films improves the creep response by a remarkable 37%, owing to an octapod pinning effect of the polymer matrix.

Accelerated Removal of Fe-Antisite Defects while Nanosizing Hydrothermal LiFePO4 with Ca(2).

Based on neutron powder diffraction (NPD) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), we show that calcium ions help eliminate the Fe-antisite defects by controlling the nucleation and evolution of the LiFePO4 particles during their hydrothermal synthesis. This Ca-regulated formation of LiFePO4 particles has an overwhelming impact on the removal of their iron antisite defects during the subsequent carbon-coating step since (i) almost all the Fe-antisite defects aggregate at the surface of the LiFePO4 crystal when the crystals are small enough and (ii) the concomitant increase of the surface area, which further exposes the Fe-antisite defects. Our results not only justify a low-cost, efficient and reliable hydrothermal synthesis method for LiFePO4 but also provide a promising alternative viewpoint on the mechanism controlling the nanosizing of LiFePO4, which leads to improved electrochemical performances.

Solution Synthesis Approach to Colloidal Cesium Lead Halide Perovskite Nanoplatelets with Monolayer-Level Thickness Control.

We report a colloidal synthesis approach to CsPbBr3 nanoplatelets (NPLs). The nucleation and growth of the platelets, which takes place at room temperature, is triggered by the injection of acetone in a mixture of precursors that would remain unreactive otherwise. The low growth temperature enables the control of the plate thickness, which can be precisely tuned from 3 to 5 monolayers. The strong two-dimensional confinement of the carriers at such small vertical sizes is responsible for a narrow PL, strong excitonic absorption, and a blue shift of the optical band gap by more than 0.47 eV compared to that of bulk CsPbBr3. We also show that the composition of the NPLs can be varied all the way to CsPbBr3 or CsPbI3 by anion exchange, with preservation of the size and shape of the starting particles. The blue fluorescent CsPbCl3 NPLs represent a new member of the scarcely populated group of blue-emitting colloidal nanocrystals. The exciton dynamics were found to be independent of the extent of 2D confinement in these platelets, and this was supported by band structure calculations.

Squeezing terahertz light into nanovolumes: nanoantenna enhanced terahertz spectroscopy (NETS) of semiconductor quantum dots.

Terahertz spectroscopy has vast potentialities in sensing a broad range of elementary excitations (e.g., collective vibrations of molecules, phonons, excitons, etc.). However, the large wavelength associated with terahertz radiation (about 300 µm at 1 THz) severely hinders its interaction with nano-objects, such as nanoparticles, nanorods, nanotubes, and large molecules of biological relevance, practically limiting terahertz studies to macroscopic ensembles of these compounds, in the form of thick pellets of crystallized molecules or highly concentrated solutions of nanomaterials. Here we show that chains of terahertz dipole nanoantennas spaced by nanogaps of 20 nm allow retrieving the spectroscopic signature of a monolayer of cadmium selenide quantum dots, a significant portion of the signal arising from the dots located within the antenna nanocavities. A Fano-like interference between the fundamental antenna mode and the phonon resonance of the quantum dots is observed, accompanied by an absorption enhancement factor greater than one million. NETS can find immediate applications in terahertz spectroscopic studies of nanocrystals and molecules at extremely low concentrations. Furthermore, it shows a practicable route toward the characterization of individual nano-objects at these frequencies.

Antimicrobial Lemongrass Essential Oil-Copper Ferrite Cellulose Acetate Nanocapsules.

Cellulose acetate (CA) nanoparticles were combined with two antimicrobial agents, namely lemongrass (LG) essential oil and Cu-ferrite nanoparticles. The preparation method of CA nanocapsules (NCs), with the two antimicrobial agents, was based on the nanoprecipitation method using the solvent/anti-solvent technique. Several physical and chemical analyses were performed to characterize the resulting NCs and to study their formation mechanism. The size of the combined antimicrobial NCs was found to be ca. 220 nm. The presence of Cu-ferrites enhanced the attachment of LG essential oil into the CA matrix. The magnetic properties of the combined construct were weak, due to the shielding of Cu-ferrites from the polymeric matrix, making them available for drug delivery applications where spontaneous magnetization effects should be avoided. The antimicrobial properties of the NCs were significantly enhanced with respect to CA/LG only. This work opens novel routes for the development of organic/inorganic nanoparticles with exceptional antimicrobial activities.

Selective cation exchange in the core region of Cu2-xSe/Cu2-xS core/shell nanocrystals.

We studied cation exchange (CE) in core/shell Cu2-xSe/Cu2-xS nanorods with two cations, Ag(+) and Hg(2+), which are known to induce rapid exchange within metal chalcogenide nanocrystals (NCs) at room temperature. At the initial stage of the reaction, the guest ions diffused through the Cu2-xS shell and reached the Cu2-xSe core, replacing first Cu(+) ions within the latter region. These experiments prove that CE in copper chalcogenide NCs is facilitated by the high diffusivity of guest cations in the lattice, such that they can probe the whole host structure and identify the preferred regions where to initiate the exchange. For both guest ions, CE is thermodynamically driven as it aims for the formation of the chalcogen phase characterized by the lower solubility under the specific reaction conditions.

Post-Synthesis Incorporation of 64Cu in CuS Nanocrystals to Radiolabel Photothermal Probes: A Feasible Approach for Clinics.

We report a simple method for the incorporation of Cu(I) or (64)Cu(I) radionuclides in covellite nanocrystals (CuS NCs). After the in situ reduction of Cu(II) or (64)Cu(II) ions by ascorbic acid, their incorporation in PEG-coated CuS NCs takes place at room temperature. In all the reaction steps, the stability of the NCs under physiological conditions was ensured. The copper incorporation reaction could also take place on CuS NCs bearing biotin molecules at their surface, with no detrimental effects on the specific binding affinity of the NCs toward streptavidin after incorporation. At low loading of Cu ions, the strong near-infrared (NIR) absorption band of the starting CuS NCs was essentially preserved, which allowed for efficient plasmonic photothermal therapy. The combined presence in the NCs of (64)Cu ions, well suitable for positron emission tomography, and of free carriers responsible for the NIR absorption, should enable their theranostic use as radiotracers and as photothermal probes in tumor ablation treatments. Moreover, the simplicity of the preparation scheme, which involves the use of radioactive species only as a last step, makes the protocol easily transferable to the clinical practice.

Morphology-Dependent Electrochemical Properties of CuS Hierarchical Superstructures.

Hierarchical superstructures formed by self-assembled nanoparticles exhibit interesting electrochemical properties that can potentially be exploited in Li-ion batteries (LIBs) as possible electrode materials. In this work, we tested two different morphologies of CuS superstructures for electrodes, namely, tubular dandelion-like and ball-like assemblies, both of which are composed of similar small covellite nanoparticles. These two CuS morphologies are characterized by their markedly different electrochemical performances, suggesting that their complex structures/morphologies influence the electrochemical properties. At 1.12 A g(-1), the cells made with CuS tubular structures delivered about 420 mAh g(-1), and at 0.56 A g(-1), the capacity was as high as about 500 mAh g(-1) with good capacity retention. Their ease of preparation and processing, together with good electrochemical performance, make CuS tubular dandelion-like clusters attractive for developing low-cost LIBs based on conversion reactions.

Redox centers evolution in phospho-olivine type (LiFe0.5Mn0.5 PO4) nanoplatelets with uniform cation distribution.

In phospho-olivine type structures with mixed cations (LiM1M2PO4), the octahedral M1 and M2 sites that dictate the degree of intersites order/disorder play a key role in determining their electrochemical redox potentials. In the case of LiFexMn1-xPO4, for example, in micrometer-sized particles synthesized via hydrothermal route, two separate redox centers corresponding to Fe(2+)/Fe(3+) (3.5 V vs Li/Li(+)) and Mn(2+)/Mn(3+) (4.1 V vs Li/Li(+)), due to the collective Mn-O-Fe interactions in the olivine lattice, are commonly observed in the electrochemical measurements. These two redox processes are directly reflected as two distinct peak potentials in cyclic voltammetry (CV) and equivalently as two voltage plateaus in their standard charge/discharge characteristics (in Li ion batteries). On the contrary, we observed a single broad peak in CV from LiFe0.5Mn0.5PO4 platelet-shaped (∼10 nm thick) nanocrystals that we are reporting in this work. Structural and compositional analysis showed that in these nanoplatelets the cations (Fe, Mn) are rather homogeneously distributed in the lattice, which is apparently the reason for a synergetic effect on the redox potentials, in contrast to LiFe0.5Mn0.5PO4 samples obtained via hydrothermal routes. After a typical carbon-coating process in a reducing atmosphere (Ar/H2), these LiFe0.5Mn0.5PO4 nanoplatelets undergo a rearrangement of their cations into Mn-rich and Fe-rich domains. Only after such cation rearrangement (via segregation) in the nanocrystals, the redox processes evolved at two distinct potentials, corresponding to the standard Fe(2+)/Fe(3+) and Mn(2+)/Mn(3+) redox centers. Our experimental findings provide new insight into mixed-cation olivine structures in which the degree of cations mixing in the olivine lattice directly influences the redox potentials, which in turn determine their charge/discharge characteristics.

Nanocrystal film patterning by inhibiting cation exchange via electron-beam or X-ray lithography.

In this Letter we report patterning of colloidal nanocrystal films that combines direct e-beam (electron beam) writing with cation exchange. The e-beam irradiation causes cross-linking of the ligand molecules present at the nanocrystal surface, and the cross-linked molecules act as a mask for further processing. Consequently, in the following step of cation exchange, which is performed by directly dipping the substrate in a solution containing the new cations, the regions that have not been exposed to the electron beam are chemically transformed, while the exposed ones remain unchanged. This selective protection allows the design of patterns that are formed by chemically different nanocrystals, yet in a homogeneous nanocrystal film. Spatially resolved compositional analysis by energy-dispersive X-ray spectroscopy (EDS) corroborates that the selective exchange occurs only in the nonirradiated regions. We demonstrate the utility of this lithography approach by fabricating conductive wires and luminescent patterns in CdSe/CdS nanocrystal films by converting nonirradiated regions to Cu2-xSe/Cu2-xS. Furthermore, we show that X-ray irradiation too can lead to protection from cation exchange.

Etched colloidal LiFePO4 nanoplatelets toward high-rate capable Li-ion battery electrodes.

LiFePO4 has been intensively investigated as a cathode material in Li-ion batteries, as it can in principle enable the development of high power electrodes. LiFePO4, on the other hand, is inherently "plagued" by poor electronic and ionic conductivity. While the problems with low electron conductivity are partially solved by carbon coating and further by doping or by downsizing the active particles to nanoscale dimensions, poor ionic conductivity is still an issue. To develop colloidally synthesized LiFePO4 nanocrystals (NCs) optimized for high rate applications, we propose here a surface treatment of the NCs. The particles as delivered from the synthesis have a surface passivated with long chain organic surfactants, and therefore can be dispersed only in aprotic solvents such as chloroform or toluene. Glucose that is commonly used as carbon source for carbon-coating procedure is not soluble in these solvents, but it can be dissolved in water. In order to make the NCs hydrophilic, we treated them with lithium hexafluorophosphate (LiPF6), which removes the surfactant ligand shell while preserving the structural and morphological properties of the NCs. Only a roughening of the edges of NCs was observed due to a partial etching of their surface. Electrodes prepared from these platelet NCs (after carbon coating) delivered a capacity of ∼ 155 mAh/g, ∼ 135 mAh/g, and ∼ 125 mAh/g, at 1 C, 5 C, and 10 C, respectively, with significant capacity retention and remarkable rate capability. For example, at 61 C (10.3 A/g), a capacity of ∼ 70 mAh/g was obtained, and at 122 C (20.7 A/g), the capacity was ∼ 30 mAh/g. The rate capability and the ease of scalability in the preparation of these surface-treated nanoplatelets make them highly suitable as electrodes in Li-ion batteries.

Self-assembly of octapod-shaped colloidal nanocrystals into a hexagonal ballerina network embedded in a thin polymer film.

Nanoparticles with unconventional shapes may exhibit different types of assembly architectures that depend critically on the environmental conditions under which they are formed. Here, we demonstrate how the presence of polymer (polymethyl methacrylate, PMMA) molecules in a solution, in which CdSe(core)/CdS(pods) octapods are initially dispersed, affects the octapod-polymer organization upon solvent evaporation. We show that a fast drop-drying process can induce a remarkable two-dimensional (2D) self-assembly of octapods at the polymer/air interface. In the resulting structure, each octapod is oriented like a "ballerina", that is, only one pod sticks out of the polymer film and is perpendicular to the polymer-air interface, while the opposite pod (with respect to the octapod's center) is fully immersed in the film and points toward the substrate, like a ballerina performing a grand battement. In some areas, a hexagonal-like pattern is formed by the ballerinas in which the six nonvertical pods, which are all embedded in the film, maintain a pod-pod parallel configuration with respect to neighboring particles. We hypothesize that the mechanism responsible for such a self-assembly is based on a fast adsorption of the octapods from bulk solution to the droplet/air interface during the early stages of solvent evaporation. At this interface, the octapods maintain enough rotational freedom to organize mutually in a pod-pod parallel configuration between neighboring octapods. As the solvent evaporates, the octapods form a ballerina-rich octapod-polymer composite in which the octapods are in close contact with the substrate. Finally, we found that the resulting octapod-polymer composite is less hydrophilic than the polymer-only film.

Hollow and concave nanoparticles via preferential oxidation of the core in colloidal core/shell nanocrystals.

Hollow and concave nanocrystals find applications in many fields, and their fabrication can follow different possible mechanisms. We report a new route to these nanostructures that exploits the oxidation of Cu(2-x)Se/Cu(2-x)S core/shell nanocrystals with various etchants. Even though the Cu(2-x)Se core is encased in a thick Cu(2-x)S shell, the initial effect of oxidation is the creation of a void in the core. This is rationalized in terms of diffusion of Cu(+) ions and electrons from the core to the shell (and from there to the solution). Differently from the classical Kirkendall effect, which entails an imbalance between in-diffusion and out-diffusion of two different species across an interface, the present mechanism can be considered as a limiting case of such effect and is triggered by the stronger tendency of Cu(2-x)Se over Cu(2-x)S toward oxidation and by fast Cu(+) diffusion in copper chalcogenides. As the oxidation progresses, expansion of the inner void erodes the entire Cu(2-x)Se core, accompanied by etching and partial collapse of the shell, yielding Cu(2-x)S(y)Se(1-y) concave particles.

Magnesium vs. sodium alginate as precursors of calcium alginate: Mechanical differences and advantages in the development of functional neuronal networks.

Calcium alginate is one of the most widely employed matrices in regenerative medicine. A downside is its heterogeneity, due to the poorly controllable character of the gelation of sodium alginate (NaAlg), i.e. the commonly used alginate salt, with calcium. Here, we have used magnesium alginate (MgAlg) as an alternative precursor of calcium alginate. MgAlg coils, more compact and thus less entangled than those of NaAlg, allow for an easier diffusion of calcium ions, whereas Mg is exchanged with calcium more slowly than Na; this allows for the formation of a material (Ca(Mg)Alg) with a more reversible creep behaviour than Ca(Na)Alg, due to a more homogeneous - albeit lower - density of elastically active cross-links. We also show that Ca(Mg)Alg supports better than Ca(Na)Alg the network development and function of embedded (rat cortical) neurons: they show greater neurite extension and branching at 7 and 21 days (Tubb3 and Map2 immunofluorescence) and better neuronal network functional maturation / more robust and longer-lasting activity, probed by calcium imaging and microelectrode array electrophysiology. Overall, our results unveil the potential of MgAlg as bioactive biomaterial for enabling the formation of functional neuron-based tissue analogues.

Hydrogen-Assisted Thermal Treatment of Electrode Materials for Electrochemical Double-Layer Capacitors.

The capacitance of electrode materials used in electrochemical double-layer capacitors (EDLCs) is currently limited by several factors, including inaccessible isolated micropores in high-surface area carbons, the finite density of states resulting in a quantum capacitance in series to Helmholtz double-layer capacitance, and the presence of surface impurities, such as functional groups and adsorbed species. To unlock the full potential of EDLC active materials and corresponding electrodes, several post-production treatments are commonly proposed to improve their capacitance and, thus, the energy density of the corresponding devices. In this work, we report a systematic study of the effect of a prototypical treatment, namely H2-assisted thermal treatment, on the chemical, structural, and thermal properties of activated carbon and corresponding electrodes. By combining multiple characterization techniques, we clarify the actual origins of the improvement of the performance (e.g., > +35% energy density for the investigated power densities in the 0.5-45 kW kg-1 range) of the EDLCs based on treated electrodes compared to the case based on the pristine electrodes. Contrary to previous works supporting a questionable graphitization of the activated carbon at temperatures <1000 °C, we found that a "surface graphitization" of the activated carbon, detected by spectroscopic analysis, is mainly associated with the desorption of surface contaminants. The elimination of surface impurities, including adsorbed species, improves the surface capacitance of the activated carbon (CsurfAC) by +37.1 and +36.3% at specific currents of 1 and 10 A g-1, respectively. Despite the presence of slight densification of the activated carbon upon the thermal treatment, the latter still improves the cell gravimetric capacitance normalized on the mass of the activated carbon only (CgAC), e.g., + 28% at 1 A g-1. Besides, our holistic approach identifies the change in the active material and binder contents as a concomitant cause of the increase of cell gravimetric capacitance (Cg), accounting for the mass of all of the electrode materials measured for treated electrodes compared to pristine ones. Overall, this study provides new insights into the relationship between the modifications of the electrode materials induced by H2-assisted thermal treatments and the performance of the resulting EDLCs.

Phase diagram of octapod-shaped nanocrystals in a quasi-two-dimensional planar geometry.

Recently, we reported the formation of crystalline monolayers consisting of octapod-shaped nanocrystals (so-called octapods) that had arranged in a square-lattice geometry through drop deposition and fast evaporation on a substrate [W. Qi, J. de Graaf, F. Qiao, S. Marras, L. Manna, and M. Dijkstra, Nano Lett. 12, 5299 (2012)]. In this paper we give a more in-depth exposition on the Monte Carlo simulations in a quasi-two-dimensional (quasi-2D) geometry, by which we modelled the experimentally observed crystal structure formation. Using a simulation model for the octapods consisting of four hard interpenetrating spherocylinders, we considered the effect of the pod length-to-diameter ratio on the phase behavior and we constructed the full phase diagram. The methods we applied to establish the nature of the phase transitions between the various phases are discussed in detail. We also considered the possible existence of a Kosterlitz-Thouless-type phase transition between the isotropic liquid and hexagonal rotator phase for certain pod length-to-diameter ratios. Our methods may prove instrumental in guiding future simulation studies of similar anisotropic nanoparticles in confined geometries and monolayers.