Photodynamics of azaindoles in polar media: the influence of the environment.

We have studied the relaxation dynamics of a family of azaindole (AI) structural isomers, 4-, 5-, 6- and 7-AI, by steady-state and time-resolved methods (fs-transient absorption and fluorescence up-conversion), in solvents of different polarity. The measurements in aprotic solvents show distinctive fluorescence yields and excited state lifetimes among the isomers, which are tuned by the polarity of the medium. Guided by simple TD-DFT calculations and based on the behavior observed in the isolated species, it has been possible to address the influence of the environment polarity on the relaxation route. According to the obtained picture, the energy of the nπ* state, which is strongly dependent on the position of the pyridinic nitrogen, controls the rate of the internal conversion channel that accounts for the distinctive photophysical behavior of the isomers. On the other hand, preliminary measurements in protic media (methanol) show a very different photodynamical behavior, in which the anomalous measured fluorescent patterns are very likely the result of reactive channels (proton transfer) triggered by the electronic excitation.

Exploiting the photophysical features of DMAN template in ITQ-51 zeotype in the search for FRET energy transfer.

The combination between photoactive molecules and inorganic structures is of great interest for the development of advanced materials in the field of optics. Particularly, zeotypes with extra-large pore size are attractive because they allow the encapsulation of bulky dyes. The microporous aluminophoshate Mg-ITQ-51 (IFO-type structure) represents an ideal candidate because of the synergic combination of two crucial features: the IFO framework itself, which is composed of non-interconnected one-dimensional extra-large elliptical channels with a diameter up to 11 Å able to host bulky guest species, and the particular organic structure-directing agent used for the synthesis (1,8-bis(dimethylamino)naphthalene, DMAN), which efficiently fills the IFO pores, and is itself a photoactive molecule with interesting fluorescence properties in the blue range of the visible spectrum, thus providing a densely-incorporated donor species for FRET processes. Besides, occlusion of DMAN dye in the framework triggers a notable improvement of its fluorescence properties by confinement effect. To extend the action of the material and to mimic processes such as photosynthesis in which FRET is essential, two robust laser dyes with bulky size, rhodamine 123 and Nile Blue, have been encapsulated for the first time in a zeolitic framework, together with DMAN, in a straightforward one-pot synthesis. Thus, photoactive systems with emission in the entire visible range have been achieved due to a partial FRET between organic chromophores protected in a rigid aluminophosphate matrix.

Confinement of a Styryl Dye into Nanoporous Aluminophosphates: Channels vs. Cavities.

Styryl dyes are generally poor fluorescent molecules inherited from their flexible molecular structures. However, their emissive properties can be boosted by restricting their molecular motions. A tight confinement into inorganic molecular sieves is a good strategy to yield highly fluorescent hybrid systems. In this work, we compare the confinement effect of two Mg-aluminophosphate zeotypes with distinct pore systems (the AEL framework, a one-dimensional channeled structure with elliptical pores of 6.5 Å × 4.0 Å, and the CHA framework, composed of large cavities of 6.7 Å × 10.0 Å connected by eight-ring narrower windows) for the encapsulation of 4-DASPI styryl dye (trans-4-[4-(Dimethylamino)styryl]-1-methylpyridinium iodide). The resultant hybrid systems display significantly improved photophysical features compared to 4-DASPI in solution as a result of tight confinement in both host inorganic frameworks. Molecular simulations reveal a tighter confinement of 4-DASPI in the elliptical channels of AEL, explaining its excellent photophysical properties. On the other hand, a singular arrangement of 4-DASPI dye is found when confined within the cavity-based CHA framework, where the 4-DASPI molecule spans along two adjacent cavities, with each aromatic ring sitting on these adjacent cavities and the polymethine chain residing within the narrower eight-ring window. However, despite the singularity of this host-guest arrangement, it provides less tight confinement for 4-DASPI than AEL, resulting in a slightly lower quantum yield.

Functionalization of Photosensitized Silica Nanoparticles for Advanced Photodynamic Therapy of Cancer.

BODIPY dyes have recently attracted attention as potential photosensitizers. In this work, commercial and novel photosensitizers (PSs) based on BODIPY chromophores (haloBODIPYs and orthogonal dimers strategically designed with intense bands in the blue, green or red region of the visible spectra and high singlet oxygen production) were covalently linked to mesoporous silica nanoparticles (MSNs) further functionalized with PEG and folic acid (FA). MSNs approximately 50 nm in size with different functional groups were synthesized to allow multiple alternatives of PS-PEG-FA decoration of their external surface. Different combinations varying the type of PS (commercial Rose Bengal, Thionine and Chlorine e6 or custom-made BODIPY-based), the linkage design, and the length of PEG are detailed. All the nanosystems were physicochemically characterized (morphology, diameter, size distribution and PS loaded amount) and photophysically studied (absorption capacity, fluorescence efficiency, and singlet oxygen production) in suspension. For the most promising PS-PEG-FA silica nanoplatforms, the biocompatibility in dark conditions and the phototoxicity under suitable irradiation wavelengths (blue, green, or red) at regulated light doses (10-15 J/cm2) were compared with PSs free in solution in HeLa cells in vitro.

Manipulating Charge-Transfer States in BODIPYs: A Model Strategy to Rapidly Develop Photodynamic Theragnostic Agents.

On the basis of a family of BINOL (1,1'-bi-2-naphthol)-based O-BODIPY (dioxyboron dipyrromethene) dyes, it is demonstrated that chemical manipulation of the chromophoric push-pull character, by playing with the electron-donating capability of the BINOL moiety (BINOL versus 3,3'-dibromoBINOL) and with the electron-acceptor ability of the BODIPY core (alkyl substitution degree), is a workable strategy to finely balance fluorescence (singlet-state emitting action) versus the capability to photogenerate cytotoxic reactive oxygen species (triplet-state photosensitizing action). It is also shown that the promotion of a suitable charge-transfer character in the involved chromophore upon excitation enhances the probability of an intersystem crossing phenomenon, which is required to populate the triple state enabling singlet oxygen production. The reported strategy opens up new perspectives for rapid development of smarter agents for photodynamic theragnosis, including heavy-atom-free agents, from a selected organic fluorophore precursor.

An nπ* gated decay mediates excited-state lifetimes of isolated azaindoles.

Aiming to serve as a guide to understand the relaxation mechanisms of more complex aza-aromatic compounds, such as purine bases, we have studied the non-radiative channels of a set of azaindole structural isomers: 4-, 5-, 6- and 7-azaindole (AI). The relaxation of the isolated molecules, after excitation at the low energy portion of their spectra, has been tracked by femtosecond time-resolved ionization, and the decay paths have been obtained with MS-CASPT2//TD-DFT calculations. Although the ultrashort measured lifetimes for 5- and 6-AI are in contrast to the long-living excited state found in 7-AI, the calculations describe a common relaxation pathway. Along it, the initially excited ππ* states decay to the ground state through a conical intersection accessed through an nπ* state that functions as a gate state. The work reveals that the position of the nitrogen atoms in the purine ring determines the barrier to access the gate state and therefore, the rate of the non-radiative relaxation.

Functionalized Fluorescent Silica Nanoparticles for Bioimaging of Cancer Cells.

Functionalized fluorescent silica nanoparticles were designed and synthesized to selectively target cancer cells for bioimaging analysis. The synthesis method and characterization of functionalized fluorescent silica nanoparticles (50-60 nm), as well as internalization and subcellular localization in HeLa cells is reported here. The dye, rhodamine 101 (R101) was physically embedded during the sol-gel synthesis. The dye loading was optimized by varying the synthesis conditions (temperature and dye concentration added to the gel) and by the use of different organotriethoxysilanes as a second silica precursor. Additionally, R101, was also covalently bound to the functionalized external surface of the silica nanoparticles. The quantum yields of the dye-doped silica nanoparticles range from 0.25 to 0.50 and demonstrated an enhanced brightness of 230-260 fold respect to the free dye in solution. The shell of the nanoparticles was further decorated with PEG of 2000 Da and folic acid (FA) to ensure good stability in water and to enhance selectivity to cancer cells, respectively. In vitro assays with HeLa cells showed that fluorescent nanoparticles were internalized by cells accumulating exclusively into lysosomes. Quantitative analysis showed a significantly higher accumulation of FA functionalized fluorescent silica nanoparticles compared to nanoparticles without FA, proving that the former may represent good candidates for targeting cancer cells.

Methylthio BODIPY as a standard triplet photosensitizer for singlet oxygen production: a photophysical study.

A complete photophysical study on the iodinated-BODIPY, 3,5-dimethyl-2,6-diiodo-8-thiomethyl-pyrromethene (MeSBDP), demonstrated that it is an excellent triplet photosensitizer for singlet oxygen production in a broad range of apolar and polar solvents. Besides its absorption and fluorescence emission spectra, the dynamics of its excited states including its intersystem crossing rate was characterized by femtosecond transient experiments. The photophysical study of its triplet state by nanosecond transient absorption spectroscopy and phosphorescence emission concluded to a diffusion-controlled quenching of 3MeSBDP by O2 and to a fraction of triplet state quenching by O2 close to unity. The high (>0.87) and solvent-insensitive singlet oxygen quantum yield φΔ measured by singlet oxygen phosphorescence emission, together with the noticeable photostability of MeSBSP, as well as the absence of quenching of singlet oxygen by MeSBDP itself, allows claiming it as an alternative standard photosensitizer for singlet oxygen production, under excitation either in the UV or in the visible range.

Fully Functionalizable ß,ß'-BODIPY Dimer: Synthesis, Structure, and Photophysical Signatures.

The versatility in the synthesis of BODIPY derivatives in terms of functionalization is further demonstrated. In particular, in this work ß-ß'-BODIPY dimers with varied functional groups in the meso positions were synthesized in very efficient yields and short reaction times from a single platform. A photophysical study was carried out in all of the compounds. The resultant dimers show absorption bands at around 600 nm as a consequence of electronically coupled monomers disposed with a dihedral angle of around 30°, which is supported by theoretical simulations. The emission properties of these molecules are distinguished by the appearance of an ICT state as the polarity of the solvent increases.

Enhancement of NIR emission by a tight confinement of a hemicyanine dye within zeolitic MgAPO-5 nanochannels.

The encapsulation of a hemicyanine dye, LDS 730, into the 1D nanochannels of MgAPO-5 aluminophosphate by "one-pot" synthesis, based on "in situ" occlusion via a crystallization inclusion method, has led to a hybrid material with emission in the NIR region. The tight fitting between the molecular size of the guest dye and the pore dimensions of the host has enabled a rigid conformation of the LDS 730 dye within the nanochannels. Consequently, fluorescence in the NIR range of the spectra is enhanced with respect to the dye in solution. The synthesis of the hybrid material was optimized through a systematic variation of the gel composition via MW in order to obtain a pure phase.

AcetylacetonateBODIPY-Biscyclometalated Iridium(III) Complexes: Effective Strategy towards Smarter Fluorescent Photosensitizer Agents.

Biscyclometalated IrIII complexes involving boron-dipyrromethene (BODIPY)-based ancillary ligands, where the BODIPY unit is grafted to different chelating cores (acetylacetonate for Ir-1 and Ir-2, and bipyridine for Ir-3) by the BODIPY meso position, have been synthesized and characterized. Complexes with the BODIPY moiety directly grafted to acetylacetonate (Ir-1 and Ir-2) exhibit higher absorption coefficients (ϵ≈4.46×104 m-1 cm-1 and 3.38×104 m-1  cm-1 at 517 nm and 594 nm, respectively), higher moderate fluorescence emission (φfl ≈0.08 and 0.22 at 528 nm and 652 nm, respectively) and, in particular, more efficient singlet oxygen generation upon visible-light irradiation (φΔ ≈0.86 and 0.59, respectively) than that exhibited by Ir-3 (φΔ ≈0.51, but only under UV light). Phosphorescence emission, nanosecond time-resolved transient absorption, and DFT calculations suggest that BODIPY-localized long-lived 3 IL states are populated for Ir-1 and Ir-2. In vitro photodynamic therapy (PDT) activity studied for Ir-1 and Ir-2 in HeLa cells shows that such complexes are efficiently internalized into the cells, exhibiting low dark- and high photocytoxicity, even at significantly low complex concentration, making them potentially suitable as theranostic agents.

Rational Design of Advanced Photosensitizers Based on Orthogonal BODIPY Dimers to Finely Modulate Singlet Oxygen Generation.

The synthesis, photophysical characterization, and modeling of a new library of halogen-free photosensitizers (PS) based on orthogonal boron dipyrromethene (BODIPY) dimers are reported. Herein we establish key structural factors in order to enhance singlet oxygen generation by judiciously choosing the substitution patterns according to key electronic effects and synthetic accessibility factors. The photosensitization mechanism of orthogonal BODIPY dimers is demonstrated to be strongly related to their intrinsic intramolecular charge transfer (ICT) character through the spin-orbit charge-transfer intersystem crossing (SOCT-ISC) mechanism. Thus, singlet oxygen generation can be effectively modulated through the solvent polarity and the presence of electron-donating or withdrawing groups in one of the BODIPY units. The photodynamic therapy (PDT) activity is demonstrated by in vitro experiments, showing that selected photosensitizers are efficiently internalized into HeLa cells, exhibiting low dark toxicity and high phototoxicity, even at low PS concentration (0.05-5×10-6 m).

Adapting BODIPYs to singlet oxygen production on silica nanoparticles.

A modified Stöber method is used to synthesize spherical core-shell silica nanoparticles (NPs) with an external surface functionalized by amino groups and with an average size around 50 nm. Fluorescent dyes and photosensitizers of singlet oxygen were fixed, either separately or conjointly, respectively in the core or in the shell. Rhodamines were encapsulated in the core with relatively high fluorescence quantum yields (Φfl ≥ 0.3), allowing fluorescence tracking of the particles. Various photosensitizers of singlet oxygen (PS) were covalenty coupled to the shell, allowing singlet oxygen production. The stability of NP suspensions strongly deteriorated upon grafting the PS, affecting their apparent singlet oxygen quantum yields. Agglomeration of NPs depends both on the type and on the amount of grafted photosensitizer. New, lab-made, halogenated 4,4-difluoro-4-bora-3a,4a-diaza-s-indacenes (BODIPY) grafted to the NPs achieved higher singlet oxygen quantum yields (ΦΔ âˆ¼ 0.35-0.40) than Rose Bengal (RB) grafted NPs (ΦΔ âˆ¼ 0.10-0.27). Finally, we combined both fluorescence and PS functions in the same NP, namely a rhodamine in the silica core and a BODIPY or RB grafted in the shell, achieving the performance Φfl ∼ 0.10-0.20, ΦΔ âˆ¼ 0.16-0.25 with a single excitation wavelength. Thus, proper choice of the dyes, of their concentrations inside and on the NPs and the grafting method enables fine-tuning of singlet oxygen production and fluorescence emission.

Formation of a Nonlinear Optical Host-Guest Hybrid Material by Tight Confinement of LDS†722 into Aluminophosphate 1D Nanochannels.

In this work, hemicyanine dye LDS 722 is encapsulated into the 1D elliptical nanochannels of MgAPO-11 aluminophosphate by a crystallization inclusion method. The synthesis of the hybrid material has been optimized through a systematic variation of the crystallization conditions in order to obtain pure and large crystals (around 20 µm×30 µm) suitable for optical applications. The tight fitting between the molecular size of the guest dye and the pore dimensions of the host has favored a rigid planar conformation of the dye, restricting its inherent flexibility, which is confirmed by molecular simulations. Consequently, the encapsulation of LDS 722 into MgAPO-11 has led to an astonishing enhancement of the fluorescence with respect to the dye into MgAPO-5, with slightly larger cylindrical channels, and with respect to the dye in solution. Moreover, the perfect alignment of LDS 722 (dye with intrinsic nonlinear-optical properties) along the channels of MgAPO-11 has revealed attractive second-order nonlinear properties, such as second harmonic generation, proven through microscopy measurements in single crystals.

Strategies for modulating the luminescence properties of pyronin Y dye-clay films: an experimental and theoretical study.

The aggregation process, particularly the type and extent of pyronin Y (PY) laser dye intercalated into supported thin films of two different trioctahedral clay minerals, LAPONITE® (Lap) and saponite (Sap), at different dye loadings is studied: (i) experimentally by means of electronic absorption and fluorescence spectroscopy and (ii) theoretically by modeling the distribution of the dye into the interlayer space of these layered silicates. According to the results, H-type aggregates of the PY dye are favoured in Lap even at very low dye loading while a much lower molecular aggregation tendency in J-type geometry is found in Sap films. The aggregation state of PY in each clay mineral is likely attributed to different strengths of the electrostatic interactions between the dye and the layered silicate in the interlayer space due to their distinctive charge localization on the TOT clay layer (i.e. net negative charge in octahedral layers for Lap vs. in tetrahedral layers for Sap), as well as the interlaminar water distribution in each clay mineral, although other factors such as their CEC and particle size cannot be discarded. To reduce the huge aggregation processes of PY dye into Lap films, surfactant molecules (DDTAB) are co-adsorbed in the interlayer space of the clay. At an optimized surfactant concentration, the aggregation tendency of PY dye in Lap is considerably reduced enormously improving the fluorescence efficiency of the PY/Lap films. Finally, by means of anisotropic response from the hybrid films to the plane of the polarized light, the orientation of the PY molecules with respect to the normal axis of the clay layer is determined for all films (with and without surfactant) at different dye loadings.

Enhanced phosphorescence emission by incorporating aromatic halides into an entangled coordination framework based on naphthalenediimide.

Phosphorescence emission at room temperature is turned on in an entangled porous coordination polymer (PCP) with naphthalenediimide (NDI) as chromophore, by incorporating halogenated guests into the pores. The phosphorescent efficiency is drastically increased by the incorporation of aromatic halide guests in comparison with the incorporation of nonaromatic derivatives. Aromatic halide guests trigger a structural transformation, which allows a strong interaction with the NDI ligand in the framework through charge-transfer complexation, and provides an extra population process of the triplet state. The long-lived photoinduced triplet states, with an emission wavelength in the red region of the visible spectrum, demonstrated by this PCP, may open the door for potential uses, for example, as singlet-oxygen generators or for bio-imaging applications.

Preparation, photophysical characterization, and modeling of LDS722/Laponite 2D-ordered hybrid films.

A novel hybrid material with promising optical properties for nonlinear optical applications is presented, as formed by LDS 722 organic dye confined in Laponite clay. Thin films of the hybrid material with different dye loadings have been prepared. The film thickness, the dye and water content, and the clay swelling due to guest molecule incorporation have been characterized. Then, the photophysical properties of the thin films have been studied in detail using experimental methods and molecular simulation. As the dye load increases, the hybrid films present a hypsochromic shift in absorption and a bathochromic shift in emission. The former is attributed to the increasing strength of solvation of the dye donor group, while the latter is ascribed to a switch from an intramolecular to an intermolecular charge-transfer process as the dye load increases. The LDS 722 molecules are preferentially oriented in the host clay almost in parallel to the platelet surfaces, inducing macroscopic order that makes the material responsive to polarized light.

Solar Gas-Phase CO2 Hydrogenation by Multifunctional UiO-66 Photocatalysts.

Solar-assisted CO2 conversion into fuels and chemical products involves a range of technologies aimed at driving industrial decarbonization methods. In this work, we report on the development of a series of multifunctional metal-organic frameworks (MOFs) based on nitro- or amino-functionalized UiO-66(M) (M: Zr or Zr/Ti) supported RuOx NPs as photocatalysts, having different energy band level diagrams, for CO2 hydrogenation under simulated concentrated sunlight irradiation. RuOx(1 wt %; 2.2 ± 0.9 nm)@UiO-66(Zr/Ti)-NO2 was found to be a reusable photocatalyst, to be selective for CO2 methanation (5.03 mmol g-1 after 22 h;, apparent quantum yield at 350, 400, and 600 nm of 1.67, 0.25, and 0.01%, respectively), and to show about 3-6 times activity compared with previous investigations. The photocatalysts were characterized by advanced spectroscopic techniques like femto- and nanosecond transient absorption, spin electron resonance, and photoluminescence spectroscopies together with (photo)electrochemical measurements. The photocatalytic CO2 methanation mechanism was assessed by operando FTIR spectroscopy. The results indicate that the most active photocatalyst operates under a dual photochemical and photothermal mechanism. This investigation shows the potential of multifunctional MOFs as photocatalysts for solar-driven CO2 recycling.

Modulating dye aggregation by incorporation into 1D-MgAPO nanochannels.

The fluorescing dye Pyronine Y has been incorporated by crystallization inclusion into three different one-dimensional microporous aluminophosphate host materials. A computer-aided rational choice of the framework of the host material made it possible to modulate the aggregation state of the guest dye molecules. Undesirable H-type dimers of Pyronine Y are included within the large channels of the AFI structure, which allow the inclusion of any of the aggregated species of the dye. Density functional theory (DFT) calculations show that H-type aggregate formation is suppressed within the ATS framework. Experimental results indicate that red-emissive J-type aggregates are formed instead, offering a one-directional, organized, multicolour emission system that is interesting for energy transport. Complete suppression of aggregation is achieved by the inclusion of Pyronine Y within the AEL-type structure, due to its particular topology and channel dimensions This results in a highly fluorescent hybrid system with extraordinarily preferential alignment of the chromophores. Here, we report experimental evidence and modelling insights for how the "cage effect" of the nanochannels can tune the optical properties of the hybrid composite material by influencing the aggregation state of the dye.

Strong intramolecular charge transfer emission in benzobisoxazole cruciforms: solvatochromic dyes as polarity indicators.

A photophysical study was carried out on a series of nine X-shaped cross-conjugated compounds based on the benzobisoxazole nucleus. These "molecular cruciforms" were terminally substituted with electron-rich 4-(N,N-dimethylamino)phenyl, electron-neutral phenyl or electron-poor 4-pyridyl groups. Intramolecular charge transfer (ICT) transitions in molecular cruciforms were shown to be activated to a different extent by the combinations of these substituents located in different positions along vertical and/or horizontal axes of the molecules, showing strong emission throughout the visible spectrum. The high fluorescence efficiency and bathochromic shifts associated with the increasing polarity of the solvent make these cruciforms interesting candidates for use as fluorescence polarity indicators operating in a broad solvatochromic range.