On the sensitivity of computed partial charges toward basis set and (exchange-)correlation treatment.

Partial charges are a central concept in general chemistry and chemical biology, yet dozens of different computational definitions exist. In prior work [Cho et al., ChemPhysChem 21, 688-696 (2020)], we showed that these can be reduced to at most three 'principal components of ionicity'. The present study addressed the dependence of computed partial charges q on 1-particle basis set and (for WFT methods) n -particle correlation treatment or (for DFT methods) exchange-correlation functional, for several representative partial charge definitions such as QTAIM, Hirshfeld, Hirshfeld-I, HLY (electrostatic), NPA, and GAPT. Our findings show that semi-empirical double hybrids can closely approach the CCSD(T) 'gold standard' for this property. In fact, owing to an error compensation in MP2, CCSD partial charges are further away from CCSD(T) than is MP2. The nonlocal correlation is important, especially when there is a substantial amount of nonlocal exchange. Employing range separation proves to be "mostly" not advantageous, while global hybrids perform optimally for 20%-30% Hartree-Fock exchange across all charge types. Basis set convergence analysis shows that an augmented triple-zeta heavy-aug-cc-pV(T+d)Z basis set or a partially augmented jun-cc-pV(T+d)Z basis set is sufficient for Hirshfeld, Hirshfeld-I, HLY, and GAPT charges. In contrast, QTAIM and NPA display slower basis set convergence. It is noteworthy that for both NPA and QTAIM, HF exhibits markedly slower basis set convergence than the correlation components of MP2 and CCSD. Triples corrections in CCSD(T), denoted as CCSD(T)-CCSD, exhibit even faster basis set convergence.

W4Λ: Leveraging Λ Coupled-Cluster for Accurate Computational Thermochemistry Approaches.

High-accuracy composite wave function methods like Weizmann-4 (W4) theory, high-accuracy extrapolated ab initio thermochemistry (HEAT), and the Feller-Peterson-Dixon (FPD) approach enable sub-kJ/mol accuracy in gas-phase thermochemical properties. Their biggest computational bottleneck is the evaluation of the valence post-CCSD(T) correction term. We demonstrate here, for the W4-17 thermochemistry benchmark and subsets thereof, that the Λ coupled-cluster expansion converges more rapidly and smoothly than the regular coupled-cluster series. By means of CCSDT(Q)Λ and CCSDTQ(5)Λ, we can considerably (up to an order of magnitude) accelerate W4- and W4.3-type calculations without loss in accuracy, leading to the W4Λ and W4.3Λ computational thermochemistry protocols.

The Importance of Tight f Basis Functions for Heavy p-Block Oxides and Halides: A Parallel With Tight d functions in the Second Row.

It is well-known that both wave function ab initio and DFT calculations on second-row compounds exhibit anomalously slow basis set convergence unless the basis sets are augmented with additional "tight" (high-exponent) d functions, as in the cc-pV(n+d)Z and aug-cc-pV(n+d)Z basis sets. This has been rationalized as being necessary for a better description of the low-lying 3d orbital, which as the oxidation state increases sinks low enough to act as a back-donation acceptor from chalcogen and halogen lone pairs. This prompts the question whether a similar phenomenon exists for the isovalent compounds of the heavy p-block. We show that for the fourth and fifth row, this is the case, but this time for tight f functions enhancing the description of the low-lying 4f and 5f Rydberg orbitals, respectively. In the third-row heavy p block, the 4f orbitals are too far up, while the 4d orbitals are adequately covered by the basis functions already present to describe the 3d subvalence orbitals.

A double-hybrid density functional based on good local physics with outstanding performance on the GMTKN55 database.

In two recent papers [A. D. Becke, J. Chem. Phys. 156, 214101 (2022) and A. D. Becke, J. Chem. Phys. 157, 234102 (2022)], we compared two Kohn-Sham density functionals based on physical modeling and theory with the best density-functional power-series fits in the literature. The best error statistics reported to date for a hybrid functional on the general main-group thermochemistry, kinetics, and noncovalent interactions (GMTKN55) chemical database of Goerigk et al. [Phys. Chem. Chem. Phys. 19, 32184 (2017)] were obtained. In the present work, additional second-order perturbation-theory terms are considered. The result is a 12-parameter double-hybrid density functional with the lowest GMTKN55 WTMAD2 "weighted total mean absolute deviation" error (1.76 kcal/mol) yet seen for any hybrid or double-hybrid density-functional approximation. We call it "DH23."

Automatic generation of complementary auxiliary basis sets for explicitly correlated methods.

Explicitly correlated calculations, aside from the orbital basis set, typically require three auxiliary basis sets: Coulomb-exchange fitting (JK), resolution of the identity MP2 (RI-MP2), and complementary auxiliary basis set (CABS). If unavailable for the orbital basis set and chemical elements of interest, the first two can be auto-generated on the fly using existing algorithms, but not the third. In this paper, we present a quite simple algorithm named autoCABS; a Python implementation under a free software license is offered at Github. For the cc-pVnZ-F12 (n = D,T,Q,5), the W4-08 thermochemical benchmark, and the HFREQ2014 set of harmonic frequencies, we demonstrate that autoCABS-generated CABS basis sets are comparable in quality to purpose-optimized OptRI basis sets from the literature, and that the quality difference becomes entirely negligible as n increases.

Thermally-Activated Tunneling in the Two-Water Bridge Catalyzed Tautomerization of Phosphinylidene Compounds.

Phosphinylidenes are an important class of organophosphorus compounds that can exhibit tautomerization between tricoordinated P(III) hydroxide (R1 R2 POH) and a pentacoordinated P(V) oxide (R1 R2 P(O)H) form. Herein we show, using the canonical variational transition state theory combined with multidimensional small-curvature tunneling approximation, the dominance of proton tunneling in the two-water-bridged tautomerizations of phosphinous acid and model phosphinylidenes comprising phosphosphinates, H-phosphonates, H-phosphinates and secondary phosphine oxides. Based on the studied system, the contribution of thermally-activated tunneling is predicted to speed up the semiclassical reaction rate by ca. threefold to as large as two orders of magnitude at 298.15 K in the gas phase. The large KIE and the concavity in the Arrhenius plots are further fingerprints of tunneling. The simulations also predicted that the rapid tunneling rate and short half-life span for the forward reaction, as opposed to the reverse reaction in fluorinated secondary phosphine oxides, would result in P(V) being elusive and only P(III) being isolable, which agrees with previous experiments where only P(III) was detected by IR and NMR spectroscopy. We also explored the role of solvent and predicted tunneling to be substantial.

S66x8 noncovalent interactions revisited: new benchmark and performance of composite localized coupled-cluster methods.

The S66x8 noncovalent interactions benchmark has been re-evaluated at the "sterling silver" level, using explicitly correlated MP2-F12 near the complete basis set limit, CCSD(F12*)/aug-cc-pVTZ-F12, and a (T) correction from conventional CCSD(T)/sano-V{D,T}Z+ calculations. The revised reference values differ by 0.1 kcal mol-1 RMS from the original Hobza benchmark and its revision by Brauer et al., but by only 0.04 kcal mol-1 RMS from the "bronze" level data in Kesharwani et al., Aust. J. Chem., 2018, 71, 238-248. We then used these to assess the performance of localized-orbital coupled cluster approaches with and without counterpoise corrections, such as PNO-LCCSD(T) as implemented in MOLPRO, DLPNO-CCSD(T1) as implemented in ORCA, and LNO-CCSD(T) as implemented in MRCC, for their respective "Normal", "Tight", and "very Tight" settings. We also considered composite approaches combining different basis sets and cutoffs. Furthermore, in order to isolate basis set convergence from domain truncation error, for the aug-cc-pVTZ basis set we compared PNO, DLPNO, and LNO approaches with canonical CCSD(T). We conclude that LNO-CCSD(T) with veryTight criteria performs very well for "raw" (CP-uncorrected), but struggles to reproduce counterpoise-corrected numbers even for veryveryTight criteria: this means that accurate results can be obtained using either extrapolation from basis sets large enough to quench basis set superposition error (BSSE) such as aug-cc-pV{Q,5}Z, or using a composite scheme such as Tight{T,Q} + 1.11[vvTight(T) - Tight(T)]. In contrast, PNO-LCCSD(T) works best with counterpoise, while performance with and without counterpoise is comparable for DLPNO-CCSD(T1). Among more economical methods, the highest accuracies are seen for dRPA75-D3BJ, ωB97M-V, ωB97M(2), revDSD-PBEP86-D4, and DFT(SAPT) with a TDEXX or ATDEXX kernel.

MP2-F12 Basis Set Convergence near the Complete Basis Set Limit: Are h Functions Sufficient?

We have investigated the title question for the W4-08 thermochemical benchmark using l-saturated truncations of a large reference (REF) basis set, as well as for standard F12-optimized basis sets. With the REF basis set, the root-mean-square (RMS) contribution of i functions to the MP2-F12 total atomization energies (TAEs) is about 0.01 kcal/mol, the largest individual contributions being 0.04 kcal/mol for P2 and P4. However, even for these cases, basis set extrapolation from {g,h} basis sets adequately addresses the problem. Using basis sets insufficiently saturated in the spdfgh angular momenta may lead to exaggerated i function contributions. For extrapolation from spdfg and spdfgh basis sets, basis set convergence appears to be quite close to the theoretical asymptotic ∝ L-7 behavior. We hence conclude that h functions are sufficient even for highly demanding F12 applications. With one-parameter extrapolation, spdf and spdfg basis sets are adequate, aug-cc-pV{T,Q}Z-F12 yielding a RMSD = 0.03 kcal/mol. A limited exploration of CCSD(F12*) and CCSD-F12b suggests our conclusions are applicable to higher-level F12 methods as well.

Performance of Localized-Orbital Coupled-Cluster Approaches for the Conformational Energies of Longer n-Alkane Chains.

We report an update and enhancement of the ACONFL (conformer energies of large alkanes [J. Phys. Chem. A2022,126, 3521-3535]) dataset. For the ACONF12 (n-dodecane) subset, we report basis set limit canonical coupled-cluster with singles, doubles, and perturbative triples [i.e., CCSD(T)] reference data obtained from the MP2-F12/cc-pV{T,Q}Z-F12 extrapolation, [CCSD(F12*)-MP2-F12]/aug-cc-pVTZ-F12, and a (T) correction from conventional CCSD(T)/aug-cc-pV{D,T}Z calculations. Then, we explored the performance of a variety of single and composite localized-orbital CCSD(T) approximations, ultimately finding an affordable localized natural orbital CCSD(T) [LNO-CCSD(T)]-based post-MP2 correction that agrees to 0.006 kcal/mol mean absolute deviation with the revised canonical reference data. In tandem with canonical MP2-F12 complete basis set extrapolation, this was then used to re-evaluate the ACONF16 and ACONF20 subsets for n-hexadecane and n-icosane, respectively. Combining those with the revised canonical reference data for the dodecane conformers (i.e., ACONF12 subset), a revised ACONFL set was obtained. It was then used to assess the performance of different localized-orbital coupled-cluster approaches, such as pair natural orbital localized CCSD(T) [PNO-LCCSD(T)] as implemented in MOLPRO, DLPNO-CCSD(T0) and DLPNO-CCSD(T1) as implemented in ORCA, and LNO-CCSD(T) as implemented in MRCC, at their respective "Normal", "Tight", "vTight", and "vvTight" accuracy settings. For a given accuracy threshold and basis set, DLPNO-CCSD(T1) and DLPNO-CCSD(T0) perform comparably. With "VeryTightPNO" cutoffs, explicitly correlated DLPNO-CCSD(T1)-F12/VDZ-F12 is the best pick among all the DLPNO-based methods tested. To isolate basis set incompleteness from localized-orbital-related truncation errors (domain, LNOs), we have also compared the localized coupled-cluster approaches with canonical DF-CCSD(T)/aug-cc-pVTZ for the ACONF12 set. We found that gradually tightening the cutoffs improves the performance of LNO-CCSD(T), and using a composite scheme such as vTight + 0.50[vTight - Tight] improves things further. For DLPNO-CCSD(T1), "TightPNO" and "VeryTightPNO" offer a statistically similar accuracy, which gets slightly better when TCutPNO is extrapolated to the complete PNO space limit. Similar to Brauer et al.'s [Phys. Chem. Chem. Phys.2016,18 (31), 20905-20925] previous report for the S66x8 noncovalent interactions, the dispersion-corrected direct random phase approximation (dRPA)-based double hybrids perform remarkably well for the ACONFL set. While the revised reference data do not affect any conclusions on the less accurate methods, they may upend orderings for more accurate methods with error statistics on the same order as the difference between reference datasets.

Benefits of Range-Separated Hybrid and Double-Hybrid Functionals for a Large and Diverse Data Set of Reaction Energies and Barrier Heights.

To better understand the thermochemical kinetics and mechanism of a specific chemical reaction, an accurate estimation of barrier heights (forward and reverse) and reaction energies is vital. Because of the large size of reactants and transition state structures involved in real-life mechanistic studies (e.g., enzymatically catalyzed reactions), density functional theory remains the workhorse for such calculations. In this paper, we have assessed the performance of 91 density functionals for modeling the reaction energies and barrier heights on a large and chemically diverse data set (BH9) composed of 449 organic chemistry reactions. We have shown that range-separated hybrid functionals perform better than the global hybrids for BH9 barrier heights and reaction energies. Except for the PBE-based range-separated nonempirical double hybrids, range separation of the exchange term helps improve the performance for barrier heights and reaction energies. The 16-parameter Berkeley double hybrid, ωB97M(2), performs remarkably well for both properties. However, our minimally empirical range-separated double hybrid functionals offer marginally better accuracy than ωB97M(2) for BH9 barrier heights and reaction energies.

Coupled Cluster Benchmark of New DFT and Local Correlation Methods: Mechanisms of Hydroarylation and Oxidative Coupling Catalyzed by Ru(II, III) Chloride Carbonyls.

We have evaluated a set of accurate canonical CCSD(T) energies for stationary points on the potential energy surface for Ru(II, III) chloride carbonyl catalysis of two competing reactions between benzene and methyl acrylate (MA), namely, hydroarylation and oxidative coupling. We have then applied this set to evaluate the performance of localized orbital coupled-cluster methods and several new and common density functionals. We find that (a) DLPNO-CCSD(T) with TightPNO cutoffs is an acceptable substitute for full canonical CCSD(T) calculations on this system; (b) for the closed-shell systems where it could be applied, LNO-CCSD(T) with tight convergence criteria is very close to the canonical results; (c) the recent ωB97X-V and ωB97M-V functionals exhibit superior performance to commonly used DFT functionals in both closed- and open-shell calculations; (d) the revDSD-PBEP86 revision of the DSD-PBEP86 double hybrid represents an improvement over the original, even though transition metals were not involved in its parametrization; and (e) DSD-SCAN and DOD-SCAN show comparable efficiency. Most tested (meta)-GGA and hybrid density functionals perform better for open-shell than for closed-shell complexes; this is not the case for the double hybrids considered.

Exploring Avenues beyond Revised DSD Functionals: II. Random-Phase Approximation and Scaled MP3 Corrections.

For revDSD double hybrids, the Görling-Levy second-order perturbation theory component is an Achilles' heel when applied to systems with significant near-degeneracy ("static") correlation. We have explored its replacement by the direct random phase approximation (dRPA), inspired by the SCS-dRPA75 functional of Kállay and co-workers. The addition to the final energy of both a D4 empirical dispersion correction and of a semilocal correlation component lead to significant improvements, with DSD-PBEdRPA75-D4 approaching the performance of revDSD-PBEP86-D4 and the Berkeley ωB97M(2). This form appears to be fairly insensitive to the choice of the semilocal functional but does exhibit stronger basis set sensitivity than the PT2-based double hybrids (due to much larger prefactors for the nonlocal correlation). As an alternative, we explored adding an MP3-like correction term (in a medium-sized basis set) to a range-separated ωDSD-PBEP86-D4 double hybrid and found it to have significantly lower WTMAD2 (weighted mean absolute deviation) for the large and chemically diverse GMTKN55 benchmark suite; the added computational cost can be mitigated through density fitting techniques.

Exploring Avenues beyond Revised DSD Functionals: I. Range Separation, with xDSD as a Special Case.

We have explored the use of range separation as a possible avenue for further improvement on our revDSD minimally empirical double hybrid functionals. Such ωDSD functionals encompass the XYG3 type of double hybrid (i.e., xDSD) as a special case for ω → 0. As in our previous studies, the large and chemically diverse GMTKN55 benchmark suite was used for evaluation. Especially when using the D4 rather than D3BJ dispersion model, xDSD has a slight performance advantage in WTMAD2. As in previous studies, PBEP86 is the winning combination for the semilocal parts. xDSDn-PBEP86-D4 marginally outperforms the previous "best in class" ωB97M(2) Berkeley double hybrid but without range separation and using fewer than half the number of empirical parameters. Range separation turns out to offer only marginal further improvements on GMTKN55 itself. While ωB97M(2) still yields better performance for small-molecule thermochemistry, this is compensated in WTMAD2 by the superior performance of the new functionals for conformer equilibria. Results for two external test sets with pronounced static correlation effects may indicate that range-separated double hybrids are more resilient to such effects.

Prototypical π-π dimers re-examined by means of high-level CCSDT(Q) composite ab initio methods.

The benzene-ethene and parallel-displaced (PD) benzene-benzene dimers are the most fundamental systems involving π-π stacking interactions. Several high-level ab initio investigations calculated the binding energies of these dimers using the coupled-cluster with singles, doubles, and quasi-perturbative triple excitations [CCSD(T)] method at the complete basis set [CBS] limit using various approaches such as reduced virtual orbital spaces and/or MP2-based basis set corrections. Here, we obtain CCSDT(Q) binding energies using a Weizmann-3-type approach. In particular, we extrapolate the self-consistent field (SCF), CCSD, and (T) components using large heavy-atom augmented Gaussian basis sets [namely, SCF/jul-cc-pV{5,6}Z, CCSD/jul-cc-pV{Q,5}Z, and (T)/jul-cc-pV{T,Q}Z]. We consider post-CCSD(T) contributions up to CCSDT(Q), inner-shell, scalar-relativistic, and Born-Oppenheimer corrections. Overall, our best relativistic, all-electron CCSDT(Q) binding energies are ∆Ee,all,rel = 1.234 (benzene-ethene) and 2.550 (benzene-benzene PD), ∆H0 = 0.949 (benzene-ethene) and 2.310 (benzene-benzene PD), and ∆H298 = 0.130 (benzene-ethene) and 1.461 (benzene-benzene PD) kcal mol-1. Important conclusions are reached regarding the basis set convergence of the SCF, CCSD, (T), and post-CCSD(T) components. Explicitly correlated calculations are used as a sanity check on the conventional binding energies. Overall, post-CCSD(T) contributions are destabilizing by 0.028 (benzene-ethene) and 0.058 (benzene-benzene) kcal mol-1, and thus, they cannot be neglected if sub-chemical accuracy is sought (i.e., errors below 0.1 kcal mol-1). CCSD(T)/aug-cc-pwCVTZ core-valence corrections increase the binding energies by 0.018 (benzene-ethene) and 0.027 (benzene-benzene PD) kcal mol-1. Scalar-relativistic and diagonal Born-Oppenheimer corrections are negligibly small. We use our best CCSDT(Q) binding energies to evaluate the performance of MP2-based, CCSD-based, and lower-cost composite ab initio procedures for obtaining these challenging π-π stacking binding energies.

Pure and Hybrid SCAN, rSCAN, and r2SCAN: Which One Is Preferred in KS- and HF-DFT Calculations, and How Does D4 Dispersion Correction Affect This Ranking?

Using the large and chemically diverse GMTKN55 dataset, we have tested the performance of pure and hybrid KS-DFT and HF-DFT functionals constructed from three variants of the SCAN meta-GGA exchange-correlation functional: original SCAN, rSCAN, and r2SCAN. Without any dispersion correction involved, HF-SCANn outperforms the two other HF-DFT functionals. In contrast, among the self-consistent variants, SCANn and r2SCANn offer essentially the same performance at lower percentages of HF-exchange, while at higher percentages, SCANn marginally outperforms r2SCANn and rSCANn. However, with D4 dispersion correction included, all three HF-DFT-D4 variants perform similarly, and among the self-consistent counterparts, r2SCANn-D4 outperforms the other two variants across the board. In view of the much milder grid dependence of r2SCAN vs. SCAN, r2SCAN is to be preferred across the board, also in HF-DFT and hybrid KS-DFT contexts.

The Atomic Partial Charges Arboretum: Trying to See the Forest for the Trees.

Atomic partial charges are among the most commonly used interpretive tools in quantum chemistry. Dozens of different 'population analyses' are in use, which are best seen as proxies (indirect gauges) rather than measurements of a 'general ionicity'. For the GMTKN55 benchmark of nearly 2,500 main-group molecules, which span a broad swathe of chemical space, some two dozen different charge distributions were evaluated at the PBE0 level near the 1-particle basis set limit. The correlation matrix between the different charge distributions exhibits a block structure; blocking is, broadly speaking, by charge distribution class. A principal component analysis on the entire dataset suggests that nearly all variation can be accounted for by just two 'principal components of ionicity': one has all the distributions going in sync, while the second corresponds mainly to Bader QTAIM vs. all others. A weaker third component corresponds to electrostatic charge models in opposition to the orbital-based ones. The single charge distributions that have the greatest statistical similarity to the first principal component are iterated Hirshfeld (Hirshfeld-I) and a minimal-basis projected modification of Bickelhaupt charges. If three individual variables, rather than three principal components, are to be identified that contain most of the information in the whole dataset, one representative for each of the three classes of Corminboeuf et al. is needed: one based on partitioning of the density (such as QTAIM), a second based on orbital partitioning (such as NPA), and a third based on the molecular electrostatic potential (such as HLY or CHELPG).

Performance of Electronic Structure Methods for the Description of Hückel-Möbius Interconversions in Extended π-Systems.

Expanded porphyrins provide a versatile route to molecular switching devices due to their ability to shift between several π-conjugation topologies encoding distinct properties. DFT remains the workhorse for modeling such extended macrocycles, when taking into account their size and huge conformational flexibility. Nevertheless, the stability of Hückel and Möbius conformers depends on a complex interplay of different factors, such as hydrogen bonding, π···π stacking, steric effects, ring strain, and electron delocalization. As a consequence, the selection of an exchange-correlation functional for describing the energy profile of topological switches is very difficult. For these reasons, we have examined the performance of a variety of wave function methods and density functionals for describing the thermochemistry and kinetics of topology interconversions across a wide range of macrocycles. Especially for hexa- and heptaphyrins, the Möbius structures have a stronger degree of static correlation than the Hückel and twisted-Hückel structures, and as a result the relative energies of singly twisted structures are a challenging test for electronic structure methods. Comparison of limited orbital space full CI calculations with CCSD(T) calculations within the same active spaces shows that post-CCSD(T) correlation contributions to relative energies are very minor. At the same time, relative energies are weakly sensitive to further basis set expansion, as proven by the minor energy differences between the extrapolated MP2/CBS energies estimated from cc-pV{T,Q}Z, diffuse-augmented heavy-aug-cc-pV{T,Q}Z and explicitly correlated MP2-F12/cc-pVDZ-F12 calculations. Hence, our CCSD(T) reference values are reasonably well-converged in both 1-particle and n-particle spaces. While conventional MP2 and MP3 yield very poor results, SCS-MP2 and particularly SOS-MP2 and SCS-MP3 agree to better than 1 kcal mol-1 with the CCSD(T) relative energies. Regarding DFT methods, the range-separated double hybrids, such as ωB97M(2) and B2GP-PLYP, outperform other functionals with RMSDs of 0.6 and 0.8 kcal mol-1, respectively. While the original DSD-PBEP86 double hybrid performs fairly poorly for these extended π-systems, the errors drop down to 1.9 kcal mol-1 for the revised revDOD-PBEP86-NL, which eliminates the same-spin correlation energy. Minnesota meta-GGA functionals with high fractions of exact exchange (M06-2X and M08-HX) also perform reasonably well, outperforming more robust and significantly less empirically parametrized functionals like SCAN0-D3.

Chirality-induced spin polarization places symmetry constraints on biomolecular interactions.

Noncovalent interactions between molecules are key for many biological processes. Necessarily, when molecules interact, the electronic charge in each of them is redistributed. Here, we show experimentally that, in chiral molecules, charge redistribution is accompanied by spin polarization. We describe how this spin polarization adds an enantioselective term to the forces, so that homochiral interaction energies differ from heterochiral ones. The spin polarization was measured by using a modified Hall effect device. An electric field that is applied along the molecules causes charge redistribution, and for chiral molecules, a Hall voltage is measured that indicates the spin polarization. Based on this observation, we conjecture that the spin polarization enforces symmetry constraints on the biorecognition process between two chiral molecules, and we describe how these constraints can lead to selectivity in the interaction between enantiomers based on their handedness. Model quantum chemistry calculations that rigorously enforce these constraints show that the interaction energy for methyl groups on homochiral molecules differs significantly from that found for heterochiral molecules at van der Waals contact and shorter (i.e., ∼0.5 kcal/mol at 0.26 nm).

Minimally Empirical Double-Hybrid Functionals Trained against the GMTKN55 Database: revDSD-PBEP86-D4, revDOD-PBE-D4, and DOD-SCAN-D4.

We present a family of minimally empirical double-hybrid DFT functionals parametrized against the very large and diverse GMTKN55 benchmark. The very recently proposed ωB97M(2) empirical double hybrid (with 16 adjustable parameters) has the lowest WTMAD2 (weighted mean absolute deviation over GMTKN55) ever reported at 2.19 kcal/mol. However, refits of the DSD-BLYP and DSD-PBEP86 spin-component-scaled, dispersion-corrected double hybrids can achieve WTMAD2 values as low as 2.33 with the very recent D4 dispersion correction (2.42 kcal/mol with the D3(BJ) dispersion term) using just a handful of adjustable parameters. If we use full DFT correlation in the initial orbital evaluation, the xrevDSD-PBEP86-D4 functional reaches WTMAD2 = 2.23 kcal/mol, statistically indistinguishable from ωB97M(2) but using just four nonarbitrary adjustable parameters (and three semiarbitrary ones). The changes from the original DSD parametrizations are primarily due to noncovalent interaction energies for large systems, which were undersampled in the original parametrization set. With the new parametrization, same-spin correlation can be eliminated at minimal cost in performance, which permits revDOD-PBEP86-D4 and revDOD-PBE-D4 functionals that scale as N4 or even N3 with the size of the system. Dependence of WTMAD2 for DSD functionals on the percentage of HF exchange is roughly quadratic; it is sufficiently weak that any reasonable value in the 64% to 72% range can be chosen semiarbitrarily. DSD-SCAN and DOD-SCAN double hybrids involving the SCAN nonempirical meta-GGA as the semilocal component have also been considered and offer a good alternative if one wishes to eliminate either the empirical dispersion correction or the same-spin correlation component. noDispSD-SCAN66 achieves WTMAD2 = 3.0 kcal/mol, compared to 2.7 kcal/mol for DOD-SCAN66-D4. However, the best performance without dispersion corrections (WTMAD2 = 2.8 kcal/mol) is reached by revωB97X-2, a slight reparametrization of the Chai-Head-Gordon range-separated double hybrid. Finally, in the context of double-hybrid functionals, the very recent D4 dispersion correction is clearly superior over D3(BJ).