The Van Gorder approach for total elbow arthroplasty.

BACKGROUND: Surgical management of the triceps during exposure for total elbow arthroplasty (TEA) is critical to a successful outcome. Previously described techniques include elevating the triceps insertion from one side or leaving the triceps insertion attached and dislocating the joint. Another approach to the elbow, first described in 1933 by Willis Campbell, MD, and subsequently modified by George Van Gorder, MD, involves turning down the triceps tendon without disrupting the triceps insertion. This approach offers complete visualization of the joint and provides excellent exposure for TEA. Only the original report of the technique and a small series of patients using this technique for TEA exist in the literature. The goal of this study was to evaluate outcomes of the Van Gorder approach in a large series of patients undergoing TEA. METHODS: All patients who underwent TEA from 2008 to 2016 were retrospectively reviewed. Only patients who underwent primary TEA performed through the Van Gorder approach with at least 6 months' follow-up were included for analysis. Patients with prior elbow surgery were excluded. Demographic data, indication for surgery, postoperative range of motion, triceps function, and need for additional surgery were recorded. Prospectively collected visual analog scale (VAS) and Global Health Quality of Life scores were also analyzed. RESULTS: A total of 53 patients met inclusion criteria. The mean age was 62 years, 81% were female, and the average follow-up was 30.2 months. The most common surgical indications included inflammatory arthritis (47%), osteoarthritis (24%), and fracture (19%). Postoperatively, average elbow arc of motion was an 8°-137°. There was 1 patient (1.89%) who developed failure of their triceps extension mechanism. A total of 10 patients (19%) underwent additional elbow surgery most commonly for superficial wound complications. Preoperative VAS scores decreased significantly, starting at 3 months postoperatively (6.76 to 3.37, P < .001), and remained constant at the 12- and 24-month postoperative visits. CONCLUSIONS: This is the largest study evaluating the Van Gorder surgical approach to the elbow for primary TEA with an average follow-up of 32 months. Overall rates of triceps failure and reoperation are consistent with other approaches for TEA.

Prevention and treatment of elbow stiffness: a 5-year update.

Elbow stiffness is a challenging and common problem faced by upper extremity surgeons. Although functional improvements can be made with both nonsurgical and surgical management strategies, physicians must remain vigilant with efforts to prevent stiffness before it starts. Recent advancements in the biology and pathology of elbow contracture have led to improved understanding of this difficult problem, and they may lead to future breakthroughs in the prevention and treatment of elbow stiffness. This article serves as an update to our previous review of elbow stiffness, focusing on recent advancements in the past 5 years, as well as updating our current algorithm for treatment.

A radiocarpal ligament reconstruction using brachioradialis for secondary ulnar translation of the carpus following radiocarpal dislocation: a cadaver study.

PURPOSE: Radiocarpal dislocation damages the radiocarpal ligaments, typically eliminating the possibility for repair. The goals of this study were to create a model for ulnar translation of the carpus and design a soft-tissue reconstruction using the brachioradialis (BR) to prevent ulnar translation of the carpus. We primarily sought to recreate the stabilizing effect of the radioscaphocapitate ligament. METHODS: Eight cadaveric upper limbs were dissected, leaving only the BR tendon. The wrist was loaded perpendicular to the long axis of the forearm, and load-displacement curves for ulnar translation were generated. The radiocarpal ligaments were sectioned. Substantial ulnar translation was seen only after complete release of the palmar and dorsal radiocarpal ligaments. Reconstruction was performed with the BR tendon, maintaining the insertion on the radial styloid. The proximal tendon stump was brought distally through a drill hole in the center of the capitate, palmar to dorsal, and secured to the dorsal rim of the radius with a suture anchor. The specimens were then retested after this reconstruction. Qualitative evaluation of graphs plotted, mini c-arm fluoroscopy, and visual observation was also performed. RESULTS: Comparison of the intact specimens and the specimens after sectioning of the radiocarpal ligaments revealed a significant difference between mean ulnar translation (11.1 mm vs 18.4 mm; p < 0.05). Comparison of the sectioned specimens before and after BR reconstruction demonstrated a statistically significant difference in mean ulnar translation (18.4 mm vs 10.6 mm; p < 0.05). Comparison of the intact specimens and the specimens after sectioning-reconstruction did not demonstrate a significant difference, indicating that the BR reconstruction re-established the stability seen in the intact specimens with regard to ulnar translation (11.1 mm vs 10.6 mm; p > 0.05). CONCLUSIONS: The model consistently produced significant ulnar translation after division of the radiocarpal ligaments. The BR reconstruction was primarily designed to restore the function of the radioscaphocapitate ligament. This biomechanical study demonstrates the ability of this reconstruction to generate a statistically significant restraint to ulnar translation in a cadaver model of radiocarpal dislocation.

Mechanical agitation and serial dilution: an option for anterior cruciate ligament graft sterilization.

Contamination of tissue grafts can occur during anterior cruciate ligament reconstruction, necessitating decontamination. This study examined whether mechanical agitation and serial dilution provides greater bacterial eradication of experimentally contaminated bone-patellar tendon-bone grafts compared with antibiotic soak or pulsatile lavage. Forty bone-patellar tendon-bone grafts were contaminated with a bacterial suspension derived from operating room floor cultures. Four groups of specimens underwent immediate culture (control), antibiotic soak, pulsatile lavage, or mechanical agitation and serial dilution. The number of colony-forming units (CFU) for each group was statistically compared using t and chi-square tests. Each method of decontamination yielded a statistically significant reduction in CFU compared with the control. Analysis of positive versus negative cultures demonstrated a statistically significant difference between mechanical agitation and serial dilution compared with the other 2 methods. Mechanical agitation and serial dilution was the only method with 0 CFU and provided superior and consistent sterilization of experimentally contaminated grafts compared with antibiotic soak and pulsatile lavage.

Radial longitudinal deficiency.

Radial longitudinal deficiency encompasses a spectrum of upper limb dysplasias and hypoplasias. The bony abnormalities of the thumb and radius are the most pronounced, but deficiencies of the accompanying muscles, nerves, vessels, and joints also greatly influence the ultimate upper extremity function. The striking clinical presentation of the involved upper limb is often more obvious than the potentially life-threatening associated systemic conditions. All children presenting with radial longitudinal deficiency, regardless of severity, require a renal ultrasound, echocardiogram, and complete blood count to evaluate the potential for associated systemic conditions; these include Fanconi's anemia, the Holt-Oram syndrome, and the VATER (vertebral anomalies, anal atresia, tracheoesophageal fistula, esophageal atresia, renal agenesis) syndrome or VACTERL (vertebral anomalies, anal atresia, cardiac abnormalities, tracheoesophageal fistula, renal agenesis, and limb defects) association. The overall health of the child, as well as the severity of the osseous and soft-tissue deformities of the affected limb, guides the long-term treatment plans.

Dorsal approach for open reduction of complex metacarpophalangeal joint dislocations.

The metacarpophalangeal (MP) joint is resistant to injury due to its strong capsuloligamentous structures, which include the volar plate and deep transverse metacarpal and collateral ligaments. Complex MP joint dislocations are, by definition, irreducible by closed means and require open reduction, as the volar plate becomes entrapped between the metacarpal head and proximal phalanx. The dorsal approach may offer the following advantages: 1) reduced risk to palmarly displaced neurovascular structures, 2) facilitated management of osteochondral fractures, and 3) full exposure of the volar plate. However, the dorsal approach requires splitting of the volar plate for adequate reduction, which may delay recovery.

Radiographic evaluation of dorsal screw penetration after volar fixed-angle plating of the distal radius: a cadaveric study.

INTRODUCTION: Extensor tendon irritation and attritional tendon ruptures are potentially serious complications after open reduction and internal fixation of distal radius fractures. These complications are well recognized after dorsal plating of distal radii; and these are now being reported after errant screw placement during volar fixed-angle plating. Intraoperative detection of improper screw placement is critical, as corrective action can be taken before completion of the operative procedure. The purpose of this study was to define the extensor tendon compartments at risk secondary to dorsal screw penetration and to compare pronation and supination fluoroscopic images with standard lateral images in demonstrating dorsal screw prominence during volar locked plating. METHODS: Eight fresh-frozen human cadaveric upper extremities underwent fixation with a volar, fixed-angle distal radius locked plate (Wright Medical Technology, Arlington, TN). Three fluoroscopic views (lateral, supinated, and pronated) followed by dorsal wrist dissections were compared to determine accuracy in detecting dorsal screw prominence and extensor tendon compartment violation. Subsequently, screws measuring 2, 4, 6, 8, and 10(mm longer than the measured depths were sequentially inserted into each distal locking screw, with each image deemed either "in" (completely inside the bone) or "out" (prominent screw tip dorsally-would typically be exchanged for a shorter screw intraoperatively). RESULTS: The radial most distal locking screw (position 1) violated either the first (25%) or second (75%) extensor tendon compartments. The average screw prominence required for radiographic detection was: 6.5(mm for lateral views and 2(mm for supinated views. Pronated views did not identify prominent screws. Screws occupying plate position 2 consistently entered Lister's tubercle, with 5/8 exiting the apex and 3/8 exiting the radial base. The average screw prominences for radiographic detection were: 2.75(mm-lateral views and 3.0(mm-supinated views. Although the screws entered the second dorsal compartment, they did not encroach upon either of the tendons. Screws occupying plate position 3 violated the third extensor tendon compartment in 7/8 specimens with 1/8 exiting the Ulan base of Lister's tubercle. The average screw prominences for radiographic detection were: 3.5(mm-lateral views and 2.5(mm-pronated views. Supinated views did not identify prominent hardware. Screws occupying plate position 4 all violated the IV dorsal extensor compartment-2/8 screws were noted to tent the posterior interosseous nerve. The average screw prominences required for radiographic detection were: 4.0(mm-lateral views and 2.5(mm-pronated views. The supinated views did not identify prominent screws. CONCLUSIONS: Volar fixed-angle plating has shown great promise in the advancement of distal radius fracture management. We have seen in our referral practices and in the literature an increase in the number of extensor tendon complications arising from unrecognized dorsally prominent screws, pegs, or tines. Standard PA and lateral radiographs cannot adequately visualize screw position and length secondary to the complex geometry of the dorsal cortex. We believe this study supports the routine application of intraoperative, oblique pronosupination fluoroscopic imaging for enhanced confirmation of distal locking screw position and length.