RESUMO
BACKGROUND AND AIMS: The anatomy of Equisetum stems is characterized by the occurrence of vallecular and carinal canals. Previous studies on the carinal canals in several Equisetum species suggest that they convey water from one node to another. METHODS: Cell wall composition and ultrastructure have been studied using immunocytochemistry and electron microscopy, respectively. Serial sectioning and X-ray computed tomography were employed to examine the internode-node-internode transition of Equisetum ramosissimum. KEY RESULTS: The distribution of the LM1 and JIM20 extensin epitopes is restricted to the lining of carinal canals. The monoclonal antibodies JIM5 and LM19 directed against homogalacturonan with a low degree of methyl esterification and the CBM3a probe recognizing crystalline cellulose also bound to this lining. The xyloglucan epitopes recognized by LM15 and CCRC-M1 were only detected in this lining after pectate lyase treatment. The carinal canals, connecting consecutive rings of nodal xylem, are formed by the disruption and dissolution of protoxylem elements during elongation of the internodes. Their inner surface appears smooth compared with that of vallecular canals. CONCLUSIONS: The carinal canals in E. ramosissimum have a distinctive lining containing pectic homogalacturonan, cellulose, xyloglucan and extensin. These canals might function as water-conducting channels which would be especially important during the elongation of the internodes when protoxylem is disrupted and the metaxylem is not yet differentiated. How the molecularly distinct lining relates to the proposed water-conducting function of the carinal canals requires further study. Efforts to elucidate the spatial and temporal distribution of cell wall polymers in a taxonomically broad range of plants will probably provide more insight into the structural-functional relationships of individual cell wall components or of specific configurations of cell wall polymers.
Assuntos
Aquaporinas/metabolismo , Parede Celular/química , Parede Celular/ultraestrutura , Equisetum/metabolismo , Glicoproteínas/metabolismo , Proteínas de Plantas/metabolismo , Imunoquímica/métodos , Microscopia Eletrônica/métodos , Reguladores de Crescimento de Plantas/metabolismo , Fenômenos Fisiológicos Vegetais , Espanha , Tomografia Computadorizada por Raios X/métodosRESUMO
UGCT, the Centre for X-ray tomography at Ghent University (Belgium) does research on X-ray tomography and its applications. This includes the development and construction of state-of-the-art CT scanners for scientific research. Because these scanners are built for very different purposes they differ considerably in their physical implementations. However, they all share common principle functionality. In this context a generic software platform was developed using LabVIEW® in order to provide the same interface and functionality on all scanners. This article describes the concept and features of this software, and its potential for tomography in a research setting. The core concept is to rigorously separate the abstract operation of a CT scanner from its actual physical configuration. This separation is achieved by implementing a sender-listener architecture. The advantages are that the resulting software platform is generic, scalable, highly efficient, easy to develop and to extend, and that it can be deployed on future scanners with minimal effort.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Software , Tomografia Computadorizada por Raios X/métodos , Humanos , Fígado/irrigação sanguínea , Fígado/diagnóstico por imagem , Tomografia Computadorizada por Raios X/instrumentação , Interface Usuário-ComputadorRESUMO
Since the development of X-ray computed tomography as a medical diagnostic tool, it was adapted and extended for many scientific applications, including plant structure research. As for many biological studies, sample preparation is of major importance to obtain good-quality images. Therefore, we present a new preparation method for fresh material which includes critical point drying and heavy metal staining. This technique enhances the contrast of fresh tissues, prevents artefacts such as tissue compression, and requires no embedding.
Assuntos
Estruturas Vegetais/ultraestrutura , Manejo de Espécimes/métodos , Tomografia Computadorizada por Raios X , Dessecação , Coloração e Rotulagem/métodosRESUMO
Micro-CT is a non-destructive technique for 3D tomographic investigation of an object. A 3D representation of the internal structure is calculated based on a series of X-ray radiographs taken from different angles. The spatial resolution of current laboratory-used micro-CT systems has come down over the last years from a few tens of microns to a few microns. This opens the possibility to perform histological investigations in 3D on a virtual representation of a sample, referred to as virtual 3D histology. The advantage of micro-CT based virtual histology is the immediate and automated 3D visualization of the sample without prior slicing, sample preparation like decalcification, photographing and aligning. This not only permits a drastic reduction in preparation time but also offers the possibility to easily investigate objects that are difficult to slice. This article presents results that were obtained on punch biopsies of horse skin, (dental) alveolus of ponies and chondro-osseous samples from the tarsus of foals studied with the new high resolution micro-CT set-up (HRXCT) at the Ghent University (Belgium) (http://www.ugct.ugent.be). This state-of-the-art set-up provides a 1 micron resolution and is therefore ideally suited for a direct comparison with standard light microscopy-based histology.
Assuntos
Técnicas Histológicas/métodos , Imageamento Tridimensional , Tomografia Computadorizada por Raios X , Animais , Cavalos , Pele/ultraestrutura , Tarso Animal/ultraestrutura , Alvéolo Dental/ultraestruturaRESUMO
The present study evaluated an innovative technique for the manufacturing of low-dosed tablets. Tablets containing hydroxyapatite and a pore forming agent (50% (w/w) Avicel PH 200/20, 37.5% and 50% corn starch/37.5% sorbitol) were manufactured by direct compression followed by sintering. The influence of pore forming agent (type and concentration), sinter temperature and sinter time on tablet properties was investigated. Sintering (1250 degrees C) revealed tablets with an acceptable friability (<1%). Using 50% (w/w) Avicel PH 200 as pore forming agent resulted in tablets combining the highest porosity (50%) and the highest median pore diameter (5 microm). Aqueous drug solutions (metoprolol tartrate, riboflavin sodium phosphate) were spiked on the tablet surface. The maximum volume of drug solution absorbed was limited (2x100 microl), revealing that these porous carriers were ideal for low dosed formulations. Drug release from the tablets was slow, independent of the drug. To accelerate drug release, tablets were manufactured using a modified gelcasting technique yielding tablets with a median pore size of 60 and 80 microm. Release from these tablets was drastically increased indicating that the permeability of the tablets was influenced by the pore size, shape and connectivity of the porous network. Changing and controlling these parameters made it possible to obtain drug delivery systems providing different drug delivery behaviour.
Assuntos
Portadores de Fármacos/química , Durapatita/química , Tecnologia Farmacêutica/métodos , Química Farmacêutica/métodos , Difusão , Sistemas de Liberação de Medicamentos , Géis , Metoprolol/química , Microscopia Eletrônica de Varredura , Modelos Estatísticos , Tamanho da Partícula , Fosfatos/química , Porosidade , Riboflavina/química , Comprimidos , Temperatura , Fatores de TempoRESUMO
We present a theoretical study of the complex relation between radon and its long-lived progeny implanted in glass surfaces. The well known (extended) Jacobi room model, which is normally used to describe radon and its progeny in a room, was transformed into a two-parameter model revealing a linear correlation between long term radon exposure and surface activity due to implanted radon decay products. Furthermore, this new approach made integration into a Monte Carlo simulation possible so that the large variation of different room model parameters could be taken into account. This allowed the calculation of a probability distribution for radon exposure from the measurement of the implanted 210Po activity. The availability of a 95% confidence interval for the radon exposure is valuable in the application of retrospective radon assessment in epidemiological studies.
Assuntos
Poluição do Ar em Ambientes Fechados , Simulação por Computador , Exposição Ambiental , Modelos Teóricos , Produtos de Decaimento de Radônio , Radônio , Vidro , Método de Monte CarloRESUMO
The spin-spin relaxation rate R2 (=1/T2) in hydrogel foams measured by use of a multiple spin echo sequence is found to be dependent on the echo time spacing. This property, referred to as R2-dispersion, originates to a large extent from molecular self-diffusion of water within internal field gradients that result from magnetic susceptibility differences between the gel and air phase. Another contribution to the R2 relaxation rate is surface relaxation. Numerical simulations are performed to investigate the relation between the foam microstructure (the mean air bubble radius and standard deviation of the air bubble radius) and foam composition properties (such as magnetic susceptibilities, diffusion coefficient and surface relaxivity) at one hand and the R2-dispersion at the other hand. The simulated R2-dispersions of gel foam are in agreement with the measured R2-dispersions. By correlating the R2-dispersion parameters and simulated microstructure properties a semi-empirical relationship is obtained that enables the mean air bubble size to be derived from measured R2-dispersion curves. The R2-derived mean air bubble size of a hydrogel foam is in agreement with the bubble size measured with X-ray micro-CT. This illustrates the feasibility of using 1H R2-dispersion measurements to determine the size of air bubbles in hydrogel foams and of alveoli in lung tissue.
Assuntos
Algoritmos , Gases/química , Espectroscopia de Ressonância Magnética/métodos , Teste de Materiais/métodos , Marcadores de SpinRESUMO
The design, development and evaluation of biomaterials that can sustain life or restore a certain body function, is a very important and rapidly expanding field in materials science. A key issue in the development of biomaterials is the design of a material that mimics the natural environment of cells. In the present work, we have therefore developed hydrogel materials that contain both a protein (gelatin) and a glycosaminoglycan (chondroitin sulphate) component. To enable a permanent crosslinking, gelatin and chondroitin sulphate were first chemically modified using methacrylic anhydride. Hydrogels containing modified gelatin (gel-MOD) and/or chondroitin sulphate (CS-MOD) were cryogenically treated as optimised earlier for gel-MOD based hydrogels (Van Vlierberghe et al., Biomacromolecules 8:331-337, 2007). The cryogenic treatment leads to tubular pores for gel-MOD based systems. For CS-MOD based hydrogels and hydrogels containing both gel-MOD and CS-MOD, a curtain-like architecture (i.e. parallel plates) was observed, depending on the applied CS-MOD concentration. In our opinion, this is the first paper in which such well-defined scaffold architectures have been obtained without using rapid prototyping techniques.