Self-Assembly of a Hierarchical Metal-Organic Framework at the Liquid/Liquid Interface via π-π Stacking Manipulations in Organoplatinum(IV) Complexes for Methanol Fuel Cells.

This study focuses on the facile synthesis of the hierarchical architecture of zeolitic imidazolate framework-8 (ZIF-8) films containing an ultrasmall amount of Pt(0) by investigating the synthesis of different organoplatinum complexes and manipulating the π-π stacking effect in these complexes at the liquid/liquid interface. The organometallic Pt(IV) precursors were complexes with a formula of [PtXMe2(R)(bpy)] (bpy = 2,2'-bipyridine; for complex 2, R = CH2CH═CHC6H5 and X = Br; for complex 3, R = CH2CH═CH2 and X = Br; for complex 4, R = Me and X = I) prepared by oxidative addition of cinnamyl bromide, allyl bromide, or methyl iodide to [PtMe2(bpy)] (complex 1). Different thin films were synthesized starting from three organometallic Pt(IV) precursors (i) by reduction of the Pt complexes at the toluene/water interface (TF2-TF4), (ii) by encapsulation of the Pt precursors in a ZIF-8 (TF5-TF7), and (iii) by reduction of the Pt precursors onto a ZIF-8 (TF8-TF10). The self-assembly of ZIF-8 and different organoplatinum precursors at the interface of two immiscible liquids leads to the preparation of films with well-engineered structures such as rhombic dodecahedra, nanorods, hierarchical architectures, and nanowires, which are very difficult and complicated to synthesize under normal conditions. The ultralow loading of platinum complexes with different degrees of π-π stacking of dangling moieties has a great impact on the structure and morphology (directing agent), which in turn drastically changes the catalytic properties. The obtained films were applied as electrocatalysts for methanol oxidation in fuel cells. The electrocatalytic performance of organoplatinum containing a cinnamyl group in hierarchical architecture TF8 was found to be superior to those of nonhierarchical structures.

Dynamic Motions of Ligands around the Metal Centers Afford a Fidget Spinner-Type AIE Luminogen.

A new type of aggregation-induced emission (AIE) luminogen containing a dimeric metal fragment and two or three phthalazine ligands is described, which shows dynamic motions of ligands around the metal centers in solution. Based on the variable-temperature and EXSY NMR spectroscopy data, X-ray crystallography structures, and computational results, three different pathways (i.e., reversible exchange with haptotropic shifts, circulation of ligands around the dimeric metal fragment, and walking on the spot of ligands on the metal centers) were considered for this dynamic behavior. Restriction of these dynamic processes in the aggregate forms of the compounds (in H2O/CH3CN solvent mixtures) contributes to their AIE. DFT calculations and NMR analysis showed that bright excited states for these molecules are not localized on isolated molecules, and the emission of them stemmed from π-dimers or π-oligomers. The morphologies and the mode of associations in the solvent mixtures were determined by using transmission electron microscopy (TEM) and concentration-dependent NMR spectroscopy. The computational results showed the presence of a conical intersection (CI) between the S0 and S1 excited state, which provides an accessible pathway for nonradiative decay in these systems.

Description of a Non-Canonical AsPt Blue Species Originating from the Aerobic Oxidation of AP-1 in Aqueous Solution.

The peculiar behavior of arsenoplatin-1, ([Pt(µ-NHC(CH3)O)2ClAs(OH)2], AP-1), in aqueous solution and the progressive appearance of a characteristic and intense blue color led us to carry out a more extensive investigation to determine the nature of this elusive chemical species, which we named "AsPt blue". A multi-technique approach was therefore implemented to describe the processes involved in the formation of AsPt blue, and some characteristic features of this intriguing species were revealed.

Non-Targeted Spectranomics for the Early Detection of Xylella fastidiosa Infection in Asymptomatic Olive Trees, cv. Cellina di Nardò.

Olive quick decline syndrome (OQDS) is a disease that has been seriously affecting olive trees in southern Italy since around 2009. During the disease, caused by Xylella fastidiosa subsp. pauca sequence type ST53 (Xf), the flow of water and nutrients within the trees is significantly compromised. Initially, infected trees may not show any symptoms, making early detection challenging. In this study, young artificially infected plants of the susceptible cultivar Cellina di Nardò were grown in a controlled environment and co-inoculated with additional xylem-inhabiting fungi. Asymptomatic leaves of olive plants at an early stage of infection were collected and analyzed using nuclear magnetic resonance (NMR), hyperspectral reflectance (HSR), and chemometrics. The application of a spectranomic approach contributed to shedding light on the relationship between the presence of specific hydrosoluble metabolites and the optical properties of both asymptomatic Xf-infected and non-infected olive leaves. Significant correlations between wavebands located in the range of 530-560 nm and 1380-1470 nm, and the following metabolites were found to be indicative of Xf infection: malic acid, fructose, sucrose, oleuropein derivatives, and formic acid. This information is the key to the development of HSR-based sensors capable of early detection of Xf infections in olive trees.

Reactivity of Cu(I) Nacnac Complexes Toward Polypnictogen Compounds.

The nacnac Cu(I) compound [LCu(MeCN)] (2) (L = [{N(C6H3Me2-2,6)C(Me)}2CH]-) was reacted with complexes containing aromatic cyclo-E5 ([Cp*Fe(η5-E5)], E = P (1a), As (1b), Cp* = η5-C5Me5), cyclo-P4 ([Cp‴Co(η4-P4)] (3), Cp‴ = η5-C5H2tBu3) and cyclo-E3 ligands ([Cp‴Ni(η3-E3)], E = P (4a), As (4b)) yielding the heterometallic complexes [(Cp*Fe)(µ,η5:2-E5)(LCu)] (E = P (5a), As (5b)), [(Cp*Fe)(µ3,η5:2:1-E5)(LCu)2] (E = P (6a), As (6b)), [(Cp‴Co)(µ,η4:2-P4)(LCu)] (7), [(Cp‴Co)(µ3,η4:2:1-P4)(LCu)2] (8), and [(Cp‴Ni)(µ,η3:2-E3)(LCu)] (E = P (9a), As (9b)). These complexes are rare examples of the coordination of a group 11 metal to aromatic cyclo-En (E = P, As; n = 3-5) ligands. All products were comprehensively characterized by crystallographic and spectroscopic methods. Their dynamic behavior in solution was studied by VT (variable-temperature) NMR spectroscopy, and their electronic structures were elucidated by DFT calculations.

Recent Advances in Catalysis Involving Bidentate N-Heterocyclic Carbene Ligands.

Since the discovery of persistent carbenes by the isolation of 1,3-di-l-adamantylimidazol-2-ylidene by Arduengo and coworkers, we witnessed a fast growth in the design and applications of this class of ligands and their metal complexes. Modular synthesis and ease of electronic and steric adjustability made this class of sigma donors highly popular among chemists. While the nature of the metal-carbon bond in transition metal complexes bearing N-heterocyclic carbenes (NHCs) is predominantly considered to be neutral sigma or dative bonds, the strength of the bond is highly dependent on the energy match between the highest occupied molecular orbital (HOMO) of the NHC ligand and that of the metal ion. Because of their versatility, the coordination chemistry of NHC ligands with was explored with almost all transition metal ions. Other than the transition metals, NHCs are also capable of establishing a chemical bond with the main group elements. The advances in the catalytic applications of the NHC ligands linked with a second tether are discussed. For clarity, more frequently targeted catalytic reactions are considered first. Carbon-carbon coupling reactions, transfer hydrogenation of alkenes and carbonyl compounds, ketone hydrosilylation, and chiral catalysis are among highly popular reactions. Areas where the efficacy of the NHC based catalytic systems were explored to a lesser extent include CO2 reduction, C-H borylation, alkyl amination, and hydroamination reactions. Furthermore, the synthesis and applications of transition metal complexes are covered.

Metal-based Heterogeneous Catalysts for One-Pot Synthesis of Secondary Anilines from Nitroarenes and Aldehydes.

Recently, N-substituted anilines have been the object of increasing research interest in the field of organic chemistry due to their role as key intermediates for the synthesis of important compounds such as polymers, dyes, drugs, agrochemicals and pharmaceutical products. Among the various methods reported in literature for the formation of C-N bonds to access secondary anilines, the one-pot reductive amination of aldehydes with nitroarenes is the most interesting procedure, because it allows to obtain diverse N-substituted aryl amines by simple reduction of nitro compounds followed by condensation with aldehydes and subsequent reduction of the imine intermediates. These kinds of tandem reactions are generally catalyzed by transition metal-based catalysts, mainly potentially reusable metal nanoparticles. The rapid growth in the last years in the field of metal-based heterogeneous catalysts for the one-pot reductive amination of aldehydes with nitroarenes demands for a review on the state of the art with a special emphasis on the different kinds of metals used as catalysts and their recyclability features.

NHCs as Neutral Donors towards Polyphosphorus Complexes.

The first adducts of NHCs (=N-heterocyclic carbenes) with aromatic polyphosphorus complexes are reported. The reactions of [Cp*Fe(η5 -P5 )] (1) (Cp*=pentamethyl-cyclopentadienyl) with IMe (=1,3,4,5-tetramethylimidazolin-2-ylidene), IMes (=1,3-bis(2,4,6-trimethylphenyl)-imidazolin-2-ylidene) and IDipp (=1,3-bis(2,6-diisopropylphenyl)-imidazolin-2-ylidene) led to the corresponding neutral adducts which can be isolated in the solid state. However, in solution, they quickly undergo a dissociative equilibrium between the adduct and 1 including the corresponding NHC. The equilibrium is influenced by the bulkiness of the NHC. [Cp''Ta(CO)2 (η4 -P4 )] (Cp''=1,3-di-tert-butylcyclopentadienyl) reacts with IMe under P atom abstraction to give an unprecedented cyclo-P3 -containing anionic tantalum complex. DFT calculations shed light onto the energetics of the reaction pathways.

PtSn Nanoalloy Thin Films as Anode Catalysts in Methanol Fuel Cells.

Reactions of SnX2 (X = Cl, Br) with [PtMe2(bipy)], 1, (bipy = 2,2'-bipyridine), followed by NaBH4 reduction at the toluene/water interface in the presence or absence of graphene oxide support rendered PtSn nanoalloy thin films. They were characterized by powder X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The electrocatalytical activity of the PtSn thin films was investigated in the methanol oxidation reaction. Our studies showed that the PtSn/reduced-graphene oxide (RGO) thin film gave better catalytic results for MOR in comparison to bare PtSn or Pt thin films. A maximum jf/jb ratio (jf and jb are the maximum current densities in the forward and backward scans, respectively) of 6.77 was obtained for the PtSn/RGO thin film deriving from the 1 + SnBr2 + NaBH4 sequence.

A Borane Platinum Complex Undergoing Reversible Hydride Migration in Solution.

Reaction of [Pt(κ2-C,N-ppy)(dmso)Cl], 1 (Hppy = 2-phenylpyridine), with Na[H2B(mb)2] (Hmb = 2-mercapto-benzimidazole) smoothly afforded the complex {[(κ3-S,B,S-HB(mb)2]Pt(κ2-C,N-ppy)H}, 2, featuring a strong reverse-dative Pt → B σ interaction in the solid state. When dissolved in thf (or acetone) solution, 2 undergoes a reversible Pt-H bond activation, establishing an equilibrium between the hexacoordinated 2 and the tetracoordinate complex {[(κ2-S,S-H2B(mb)2]Pt(κ2-C,N-ppy)}, 3, as ascertained by multinuclear NMR. Hydrolysis of the B-N bond in 2/3 resulted ultimately in the formation of a dimeric half-lantern platinum(II,II) complex [{Pt(κ2-C,N-ppy)(µ2-κ2-N,S-mb)}2], 4. The SC-XRD structures of 2 and 4 are reported.

A greener and efficient access to substituted four- and six-membered sulfur-bearing heterocycles.

The regioselective functionalization of four- and six-membered cyclic sulfones was investigated using a lithiation/electrophile trapping strategy. The protocol features an interesting eco-compatibility profile because of the use of 2-MeTHF as a solvent (more eco-friendly than other organic solvents) and n-hexyllithium as a lithiating agent safer than other alkyllithium compounds. Several derivatives were prepared with different stereochemistry and substitution patterns. A number of selected derivatives, spanning a range of 5 log P units, were characterized for their lipophilicity through RP-HPLC. A good linear correlation, with a slope close to 1.0, was observed between the experimentally determined RP-HPLC lipophilicity parameters (log k'w) and calculated log P (clog P) values, whereas a systematic difference in absolute values between the chromatographic parameters and in silico lipophilicity descriptors can be attributed mainly to silanophilic interactions between the H-bond acceptor SO2 group and free silanol groups on silica-based C18 columns, which results in increased retention times.

Uncovering Intramolecular π-Type Hydrogen Bonds in Solution by NMR Spectroscopy and DFT Calculations.

Reaction between the phosphinito bridged diplatinum species [(PHCy2 )Pt(µ-PCy2 ){κ(2) P,O-µ-P(O)Cy2 }Pt(PHCy2 )](Pt-Pt) (1), and (trimethylsilyl)acetylene at 273 K affords the σ-acetylide complex [(PHCy2 )(η(1) -Me3 SiC≡C)Pt(µ-PCy2 )Pt(PHCy2 ){κP-P(OH)Cy2 }](Pt-Pt) (2) featuring an intramolecular π-type hydrogen bond. Scalar and dipolar couplings involving the POH proton were detected by 2D NMR experiments. Relativistic DFT calculations of the geometry, relative energy, and NMR properties of model systems of 2 confirmed the structural assignment and allowed the energy of the π-type hydrogen bond to be estimated (ca. 22 kJ mol(-1) ).

Homoleptic Phosphaalkyne Complexes of Silver(I).

By employing silver salts with a weakly coordinating anion Ag[A] ([A]=[FAl{OC12 F15 }3 ], [Al{OC(CF3 )3 }4 ]), two phosphaalkynes could be coordinated side-on to a bare silver(I) center to form the unprecedented homoleptic complexes [Ag(η2 -P≡CtBu)2 ][FAl{OC12 F15 }3 ] (1) and [Ag(η2 -P≡CtBu)2 ][Al{OC(CF3 )3 }4 ] (2). DFT calculations show that the perpendicular arrangement in 1 is the minimum energy structure of the coordination of the two phosphaalkynes to a silver atom, whereas for 2 a unique square-planar coordination mode of the phosphaalkynes at Ag+ was found. Reactions with donor molecules yield the trigonally planar coordinated silver salts [((CH3 )2 CO)Ag(η2 -P≡CtBu)2 ][FAl{OC12 F15 }3 ] (3) and [(C7 H8 )2 Ag(η2 -P≡CtBu)][FAl{OC12 F15 }3 ] (4). All of the compounds were comprehensively characterized in solution and in the solid state.

Performance Assessment in Fingerprinting and Multi Component Quantitative NMR Analyses.

An interlaboratory comparison (ILC) was organized with the aim to set up quality control indicators suitable for multicomponent quantitative analysis by nuclear magnetic resonance (NMR) spectroscopy. A total of 36 NMR data sets (corresponding to 1260 NMR spectra) were produced by 30 participants using 34 NMR spectrometers. The calibration line method was chosen for the quantification of a five-component model mixture. Results show that quantitative NMR is a robust quantification tool and that 26 out of 36 data sets resulted in statistically equivalent calibration lines for all considered NMR signals. The performance of each laboratory was assessed by means of a new performance index (named Qp-score) which is related to the difference between the experimental and the consensus values of the slope of the calibration lines. Laboratories endowed with a Qp-score falling within the suitable acceptability range are qualified to produce NMR spectra that can be considered statistically equivalent in terms of relative intensities of the signals. In addition, the specific response of nuclei to the experimental excitation/relaxation conditions was addressed by means of the parameter named NR. NR is related to the difference between the theoretical and the consensus slopes of the calibration lines and is specific for each signal produced by a well-defined set of acquisition parameters.

Sulfur-Assisted Phenyl Migration from Phosphorus to Platinum in PtW2 and PtMo2 Clusters Containing Thioether-Functionalized Short-Bite Ligands of the Bis(diphenylphosphanyl)amine-Type.

The reactivity of dichloroplatinum(II) complexes containing thioether-functionalized bis(diphenylphosphanyl)amines of formula (Ph2P)2N(CH2)2SR (R = (CH2)5CH3, CH2Ph) toward group 6 carbonylmetalates Na[M(CO)3Cp] (M = Mo or W, Cp = cyclopentadienyl) was explored. Reactions with two or more equivalents of Na[M(CO)3Cp] (M = Mo or W) afforded the trinuclear complexes of general formula [PtPh{M(CO)3Cp}{µ-P(Ph)N(CH2CH2SR)(PPh2)-κ(3)P,P,S}M(CO)2Cp] (3 M = Mo, R = (CH2)5CH3; 4 M = Mo, R = CH2Ph; 9 M = W, R = (CH2)5CH3; 10 M = W, R = CH2Ph), the structure of which consists of a six-membered platinacycle condensed with a four-membered M-P-N- P cycle, together with small amounts of isomeric PtM2 clusters [PtM2(CO)5Cp2{(Ph2P)2N(CH2CH2SR)-κ(2)P,P}] (5 M = Mo, R = (CH2)5CH3; 6 M = Mo, R = CH2Ph; 11 M = W, R = (CH2)5CH3; 12 M = W, R = CH2Ph) in which the ligand (Ph2P)2NR solely chelates the Pt atom or bridges an M-Pt bond as in [PtM2(CO)5Cp2{µ-(Ph2P)2N(CH2CH2SR)-κ(2)P,P}] (7 M = Mo, R = (CH2)5CH3; 8 M = Mo, R = CH2Ph; 13 M = W, R = (CH2)5CH3; 14 M = W, R = CH2Ph). The synthesis of the trinuclear complexes 3, 4, 9, and 10 entails an unexpected P-phenyl bond cleavage reaction and phenyl migration onto Pt. When only 1 equiv of Na[M(CO)3Cp] (M = Mo or W) was used, the heterodinuclear products of monosubstitution [PtCl{M(CO)3Cp}{Ph2PN(R)PPh2-P,P}] (15 M = Mo, R = (CH2)5CH3; 16 M = Mo, R = CH2Ph; 17 M = W, R = (CH2)5CH3; 18 M = W, R = CH2Ph) were obtained, which are the precursors to the bicyclic products 3, 4, 9, and 10, respectively. Density functional calculations were performed to study the thermodynamics of the formation of all the new complexes, to evaluate the relative stabilities of the isomeric chelated and bridged forms, and to trace the mechanism of formation of the phosphanido-bridged products 3, 4, 9, and 10. It was concluded that Pt(II) complexes containing a thioether-functionalized short-bite ligand, [PtCl2{Ph2PN(R)PPh2}], react with Na[M(CO)3Cp] to yield first heterodinuclear Pt-M and then heterotrinuclear PtM2 complexes resulting from the activation of a P-C bond in one of the PPh2 groups and phenyl migration to Pt. The critical role of an intramolecular thioether group was demonstrated.

Multinuclear Solid-State NMR and DFT Studies on Phosphanido-Bridged Diplatinum Complexes.

Multinuclear ((31)P, (195)Pt, (19)F) solid-state NMR experiments on (nBu4N)2[(C6F5)2Pt(µ-PPh2)2Pt(C6F5)2] (1), [(C6F5)2Pt(µ-PPh2)2Pt(C6F5)2](Pt-Pt) (2), and cis-Pt(C6F5)2(PHPh2)2 (3) were carried out under cross-polarization/magic-angle-spinning conditions or with the cross-polarization/Carr-Purcell Meiboom-Gill pulse sequence. Analysis of the principal components of the (31)P and (195)Pt chemical shift (CS) tensors of 1 and 2 reveals that the variations observed comparing the isotropic chemical shifts of 1 and 2, commonly referred to as "ring effect", are mainly due to changes in the principal components oriented along the direction perpendicular to the Pt2P2 plane. DFT calculations of (31)P and (195)Pt CS tensors confirmed the tensor orientation proposed from experimental data and symmetry arguments and revealed that the different values of the isotropic shieldings stem from differences in the paramagnetic and spin-orbit contributions.

Resin-Immobilized Palladium Nanoparticle Catalysts for Organic Reactions in Aqueous Media: Morphological Aspects.

An insight into the nano- and micro-structural morphology of a polymer supported Pd catalyst employed in different catalytic reactions under green conditions is reported. The pre-catalyst was obtained by copolymerization of the metal-containing monomer Pd(AAEMA)2 [AAEMA-=deprotonated form of 2-(acetoacetoxy) ethyl methacrylate] with ethyl methacrylate as co-monomer, and ethylene glycol dimethacrylate as cross-linker. This material was used in water for the Suzuki-Miyaura cross-coupling of aryl bromides, and for the reduction of nitroarenes and quinolines using NaBH4 or H2, as reductants. TEM analyses showed that in all cases the pristine Pd(II) species were reduced in situ to Pd(0), which formed metal nanoparticles (NPs, the real active species). The dependence of their average size (2-10 nm) and morphology on different parameters (temperature, reducing agent, presence of a phase transfer agent) is discussed. TEM and micro-IR analyses showed that the polymeric support retained its porosity and stability for several catalytic cycles in all reactions and Pd NPs did not aggregate after reuse. The metal nanoparticle distribution throughout the polymer matrix after several recycles provided precious information about the catalytic mechanism, which was truly heterogeneous in the hydrogenation reactions and of the so-called "release and catch" type in the Suzuki coupling.

Fixation and release of intact E4 tetrahedra (E=P, As).

By the reaction of [NacnacCuCH3CN] with white phosphorus (P4) and yellow arsenic (As4), the stabilization and enclosure of the intact E4 tetrahedra are realized and the disubstituted complexes [(NacnacCu)2(µ,η(2:2)-E4)] (1 a: E=P, 1 b: E=As) are formed. The mono-substituted complex [NacnacCu(η(2)-P4)] (2), was detected by the exchange reaction of 1 a with P4 and was only isolated using low-temperature work-up. All products were comprehensively spectroscopically and crystallographically characterized. The bonding situation in the products as intact E4 units (E=P, As) was confirmed by theory and was experimentally proven by the pyridine promoted release of the bridging E4 tetrahedra in 1.

Harnessing the ortho-directing ability of the azetidine ring for the regioselective and exhaustive functionalization of arenes.

This work demonstrates how the directing ability of the azetidine ring could be useful for regioselective ortho-C-H functionalization of aryl compounds. Robust polar organometallic (lithiated) intermediates are involved in this synthetic strategy. The reagent n-hexyllithium emerged as a safer, yet still effective, basic reagent for the hydrogen/lithium permutation relative to the widely used reagent nBuLi. Two different reaction protocols were discovered for regioselective lithiation at the ortho positions adjacent to the azetidine ring, which served as a toolbox when other competing directing groups were installed on the aromatic ring. The coordinating ability of the azetidine nitrogen atom, as well as the involvement of dynamic phenomena related to the preferential conformations of 2-arylazetidine derivatives, were recognized to be responsible for the observed reactivity and regioselectivity. A site-selective functionalization of the aromatic ring was achieved for aryl azetidines with either coordinatively competent groups (e.g. methoxy) or inductively electron-withdrawing substituents (e.g. chlorine and fluorine). By fine-tuning the reaction conditions, regioselective introduction of several substituents on the aromatic ring could be realized. Several substitution patterns were accomplished, which included 1,2,3-trisubstitution, 1,2,3,4-tetrasubstitution, and 1,2,3,4,5-pentasubstitution, up to the exhaustive substitution of the aromatic ring.

Optimized Sulfonated Poly(Ether Ether Ketone) Membranes for In-House Produced Small-Sized Vanadium Redox Flow Battery Set-Up.

The ionic exchange membranes represent a core component of redox flow batteries. Their features strongly affect the performance, durability, cost, and efficiency of these energy systems. Herein, the operating conditions of a lab-scale single-cell vanadium flow battery (VRFB) were optimized in terms of membrane physicochemical features and electrolyte composition, as a way to translate such conditions into a large-scale five-cell VRFB stack system. The effects of the sulfonation degree (SD) and the presence of a filler on the performances of sulfonated poly(ether ether ketone) (SPEEK) ion-selective membranes were investigated, using the commercial perfluorosulfonic-acid Nafion 115 membrane as a reference. Furthermore, the effect of a chloride-based electrolyte was evaluated by comparing it to the commonly used standard sulfuric acid electrolyte. Among the investigated membranes, the readily available SPEEK50-0 (SD = 50%; filler = 0%) resulted in it being permeable and selective to vanadium. Improved coulombic efficiency (93.4%) compared to that of Nafion 115 (88.9%) was achieved when SPEEK50-0, in combination with an optimized chloride-based electrolyte, was employed in a single-cell VRFB at a current density of 20 mA·cm-2. The optimized conditions were successfully applied for the construction of a five-cell VRFB stack system, exhibiting a satisfactory coulombic efficiency of 94.5%.