Mechanistic understanding of the correlation between structure and dynamics of liquid carbonate electrolytes: impact of polarization.

Liquid electrolyte design and modelling is an essential part of the development of improved lithium ion batteries. For mixed organic carbonates (ethylene carbonate (EC) and ethyl-methyl carbonate (EMC) mixtures)-based electrolytes with LiPF6 as salt, we have compared a polarizable force field with the standard non-polarizable force field with and without charge rescaling to model the structural and dynamic properties. The result of our molecular dynamics simulations shows that both polarizable and non-polarizable force fields have similar structural factors, which are also in agreement with X-ray diffraction experimental results. In contrast, structural differences are observed for the lithium neighborhood, while the lithium-anion neighbourhood is much more pronounced for the polarizable force field. Comparison of EC/EMC coordination statistics with Fourier transformed infrared spectroscopy (FTIR) shows the best agreement for the polarizable force field. Also for transport quantities such as ionic conductivities, transference numbers, and viscosities, the agreement with the polarizable force field is by far better for a large range of salt concentrations and EC : EMC ratios. In contrast, for the non-polarizable variants, the dynamics are largely underestimated. The excellent performance of the polarizable force field is explored in different ways to pave the way to a realistic description of the structure-dynamics relationships for a wide range of salt and solvent compositions for this standard electrolyte. In particular, we can characterize the distinct correlation terms between like and unlike ions, relate them to structural properties, and explore to which degree the transport in this electrolyte is mass or charge limited.

Polysulfide Speciation and Migration in Catholyte Lithium-Sulfur Cells.

Semi-liquid catholyte Lithium-Sulfur (Li-S) cells have shown to be a promising path to realize high energy density energy storage devices. In general, Li-S cells rely on the conversion of elemental sulfur to soluble polysulfide species. In the case of catholyte cells, the active material is added through polysulfide species dissolved in the electrolyte. Herein, we use operando Raman spectroscopy to track the speciation and migration of polysulfides in the catholyte to shed light on the processes taking place. Combined with ex-situ surface and electrochemical analysis we show that the migration of polysulfides is central in order to maximize the performance in terms of capacity (active material utilization) as well as interphase stability on the Li-metal anode during cycling. More specifically we show that using a catholyte where the polysulfides have the dual roles of active material and conducting species, e. g. no traditional Li-salt (such as LiTFSI) is present, results in a higher mobility and faster migration of polysulfides. We also reveal how the formation of long chain polysulfides in the catholyte is delayed during charge as a result of rapid formation and migration of shorter chain species, beneficial for reaching higher capacities. However, the depletion of ionic species during the last stage of charge, due to the conversion to and precipitation of elemental sulfur on the cathode support, results in polarization of the cell before full conversion can be achieved.

Effects of Combined Allogenic Adipose Stem Cells and Hyperbaric Oxygenation Treatment on Pathogenesis of Osteoarthritis in Knee Joint Induced by Monoiodoacetate.

The beneficial effects of HBO in inflammatory processes make it an attractive type of treatment for chronic arthritis. In addition, the effects of combination therapy based on adipose stem cells and HBO on OA progression have not been fully investigated. The current study explored the efficacy of intra-articular injection of allogeneic adipose-derived mesenchymal stem cells (ADMSCs) combined with hyperbaric oxygenation treatment (HBO) in a rat osteoarthritis (OA) model. The rat OA model was induced by intra-articular injection of monoiodoacetate (MIA) and 7 days after application of MIA rats were divided into five groups: healthy control (CTRL), osteoarthritis (OA), ADMSCs (ADS), the HBO+ADS21day and HBO+ADS28day groups. A single dose of 1 × 106 allogeneic ADMSCs suspended in sterile saline was injected into the knee joint alone or in combination with HBO treatment. Rats were sacrificed at 3 or 4 weeks after MIA injection. Treatment outcomes were evaluated by radiographic, morphological and histological analysis and by specific staining of articular cartilage. We also measured the level of inflammatory and pro/antioxidative markers. We confirmed that combined treatment of ADMSCs and HBO significantly improved the regeneration of cartilage in the knee joint. Rtg score of knee joint damage was significantly decreased in the HBO+ADS21day and HBO+ADS28day groups compared to the OA. However, the positive effect in the HBO+ADS28day group was greater than the HBO+ADS21day group. The articular cartilage was relatively normal in the HBO+ADS28day group, but moderate degeneration was observed in the HBO+ADS21day compared to the OA group. These findings are in line with the histopathological results. A significantly lower level of O2-. was observed in the HBO+ADS28day group but a higher NO level compared to the HBO+ADS21day group. Moreover, in the HBO+ADS28day group significantly higher concentrations of IL-10 were observed but there was no significant difference in proinflammatory cytokine in serum samples. These results indicate that a single intra-articular injection of allogeneic ADMSCs combined with HBO efficiently attenuated OA progression after 28 days with greater therapeutic effect compared to alone ADMSCs or after 3 weeks of combined treatment. Combined treatment might be an effective treatment for OA in humans.

Critical Role of Functional Groups Containing N, S, and O on Graphene Surface for Stable and Fast Charging Li-S Batteries.

Lithium-sulfur (Li-S) batteries are considered one of the most promising energy storage technologies, possibly replacing the state-of-the-art lithium-ion (Li-ion) batteries owing to their high energy density, low cost, and eco-compatibility. However, the migration of high-order lithium polysulfides (LiPs) to the lithium surface and the sluggish electrochemical kinetics pose challenges to their commercialization. The interactions between the cathode and LiPs can be enhanced by the doping of the carbon host with heteroatoms, however with relatively low doping content (<10%) in the bulk of the carbon, which can hardly interact with LiPs at the host surface. In this study, the grafting of versatile functional groups with designable properties (e.g., catalytic effects) directly on the surface of the carbon host is proposed to enhance interactions with LiPs. As model systems, benzene groups containing N/O and S/O atoms are vertically grafted and uniformly distributed on the surface of expanded reduced graphene oxide, fostering a stable interface between the cathode and LiPs. The combination of experiments and density functional theory calculations demonstrate improvements in chemical interactions between graphene and LiPs, with an enhancement in the electrochemical kinetics, power, and energy densities.

Structure and dynamics of highly concentrated LiTFSI/acetonitrile electrolytes.

High salt concentration has been shown to induce increased electrochemical stability in organic solvent-based electrolytes. Accompanying the change in bulk properties is a structural ordering on mesoscopic length scales and changes in the ion transport mechanism have also been suggested. Here we investigate the local structure and dynamics in highly concentrated acetonitrile electrolytes as a function of salt concentration. Already at low concentrations ordering on microscopic length scales in the electrolytes is revealed by small angle X-ray scattering, as a result of correlations of Li+ coordinating clusters. For higher salt concentrations a charge alternation-like ordering is found as anions start to take part in the solvation. Results from quasi-elastic neutron spectroscopy reveal a jump diffusion dynamical process with jump lengths virtually independent of both temperature and Li-salt concentration. The jump can be envisaged as dissociation of a solvent molecule or anion from a particular Li+ solvation structure. The residence time, 50-800 ps, between the jumps is found to be highly temperature and Li-salt concentration dependent, with shorter residence times for higher temperature and lower concentrations. The increased residence time at high Li-salt concentration can be attributed to changes in the interaction of the solvation shell as a larger fraction of TFSI anions take part in the solvation, forming more stable solvation shells.

Designing Highly Conductive Functional Groups Improving Guest-Host Interactions in Li/S Batteries.

Li-sulfur batteries are of great interest due to their potential to surpass the energy densities of other battery types, but the low electronic conductivity of both sulfur and its discharge products requires the use of a conductive host material. The most common is the use of different porous carbons which normally are hydrophobic and hardly retain the polar discharge products of the Li/S reaction, such as Li2 S and lithium polysulfides (LiPs), at the working electrode. Functionalized hosts have been proposed as a strategy to improve LiPs interactions, including the use of heteroatom doping, organic frameworks, metals, metal oxides, sulfide particles, and conductive polymers. Despite demonstrating an improved cycle life, the functionalized structures often have an intrinsic limitation related to a low electronic conductivity resulting in slow kinetics and poor rate capability of Li/S cells. Herein, recent research trends aimed at designing sulfur electrodes with highly conductive functional groups on nanostructured hosts surface are reviewed. The main concepts, key developments, and parameters for building 3D hosts architectures that enable fast charge rates and long cycle life at high sulfur loadings are discussed.

Density scaling of structure and dynamics of an ionic liquid.

Room temperature ionic liquids are salts with low melting points achieved by employing bulky and asymmetrical ions. The molecular design leads to apolar and polar parts as well as the presence of competing Coulomb and van der Waals interactions giving rise to nano-scale structure, e.g. charge ordering. In this paper we address the question of how these nano-scale structures influence transport properties and dynamics on different timescales. We apply pressure and temperature as control parameters and investigate the structure factor, charge transport, microscopic alpha relaxation and phonon dynamics in the phase diagram of an ionic liquid. Including viscosity and self diffusion data from literature we find that all the dynamic and transport variables studied follow the same density scaling, i.e. they all depend on the scaling variable Γ = ργ/T, with γ = 2.8. The molecular nearest neighbor structure is found to follow a density scaling identical to that of the dynamics, while this is not the case for the charge ordering, indicating that the charge ordering has little influence on the investigated dynamics.

Adverse plasma fatty acid composition in patients with femoral neck fracture1.

Our study aimed to examine the status of plasma fatty acids (FAs), inflammatory markers, and lipid peroxidation in patients with femoral neck fractures. The study included 20 patients (64-86 years) with femoral neck fractures indicated for surgery and a control group of 17 elderly subjects without fractures or serious chronic diseases. Plasma was obtained during the first 12 h postfracture and presurgery and 7 days postop. Compared to the control, patients had significantly higher saturated FA (SFA) and monounsaturated FA as well as increased TNF-α and IL-6. Opposite to that, levels of individual and total n-6 polyunsaturated FA (PUFA), individual and total n-3 PUFA, n-6/n-3 ratio, and levels of thiobarbituric acid reactive substances (TBARS) were markedly lower in the patient than in the controls. On the seventh day after the surgery, we showed a further rise in the SFA, oleic acid, and TNF-α and reductions of n-6 PUFA and IL-6. Taken together, our results suggest that altered FA status, especially reduced PUFA, may influence hip fracture repair and even contribute to femoral fracture susceptibility in the elderly. A potential benefit from nutritional intervention with PUFA in prevention and (or) fracture healing should be considered.

Low Dose X-Ray Speckle Visibility Spectroscopy Reveals Nanoscale Dynamics in Radiation Sensitive Ionic Liquids.

X-ray radiation damage provides a serious bottleneck for investigating microsecond to second dynamics on nanometer length scales employing x-ray photon correlation spectroscopy. This limitation hinders the investigation of real time dynamics in most soft matter and biological materials which can tolerate only x-ray doses of kGy and below. Here, we show that this bottleneck can be overcome by low dose x-ray speckle visibility spectroscopy. Employing x-ray doses of 22-438 kGy and analyzing the sparse speckle pattern of count rates as low as 6.7×10^{-3} per pixel, we follow the slow nanoscale dynamics of an ionic liquid (IL) at the glass transition. At the prepeak of nanoscale order in the IL, we observe complex dynamics upon approaching the glass transition temperature T_{G} with a freezing in of the alpha relaxation and a multitude of millisecond local relaxations existing well below T_{G}. We identify this fast relaxation as being responsible for the increasing development of nanoscale order observed in ILs at temperatures below T_{G}.

Tailor-Made Electrospun Multilayer Composite Polymer Electrolytes for High-Performance Lithium Polymer Batteries.

A novel tailor-made multilayer composite polymer electrolyte, consisting of two outer layers of electrospun polyacrylonitrile (PAN) and one inner layer of poly(vinyl acetate) (PVAc)/poly(methyl methacrylate) (PMMA)/poly(ethylene oxide) (PEO) fibrous membrane, was prepared using continuous electrospinning. These membranes, which are made up of fibers with diameters in the nanometer range, were stacked in layers to produce interconnected pores that result in a high porosity. Gel polymer electrolytes (GPEs) were prepared by entrapping a liquid electrolyte (1 M LiPF6 in ethylene carbonate/dimethyl carbonate) in the membranes. The composite membranes exhibited a high electrolyte uptake of 450-510%, coupled with an improved room temperature ionic conductivity of up to 4.72 mS cm-1 and a high electrochemical stability of 4.6 V versus Li/Li+. Electrochemical investigations of a composite membrane of PAN-PVAc-PAN, with a LiFePO4 cathode synthesized in-house, showed a high initial discharge capacity of 145 mAh g-1, which corresponds to 85% utilization of the active material, and displayed stable cycle performance.

Tailormade Polysaccharides with Defined Branching Patterns: Enzymatic Polymerization of Arabinoxylan Oligosaccharides.

The heterogeneous nature of non-cellulosic polysaccharides, such as arabinoxylan, makes it difficult to correlate molecular structure with macroscopic properties. To study the impact of specific structural features of the polysaccharides on crystallinity or affinity to other cell wall components, collections of polysaccharides with defined repeating units are required. Herein, a chemoenzymatic approach to artificial arabinoxylan polysaccharides with systematically altered branching patterns is described. The polysaccharides were obtained by glycosynthase-catalyzed polymerization of glycosyl fluorides derived from arabinoxylan oligosaccharides. X-ray diffraction and adsorption experiments on cellulosic surfaces revealed that the physicochemical properties of the synthetic polysaccharides strongly depend on the specific nature of their substitution patterns. The artificial polysaccharides allow structure-property relationship studies that are not accessible by other means.

Interleukin-6 as possible early marker of stress response after femoral fracture.

Bone fracture healing is a complex process which at best results in full recovery of function and structure of injured bone tissue, but all the mechanisms involved in this process, and their mutual interaction, are not fully understood. Despite advancement of surgical procedures, this type of fractures is still a major public health concern. In the last few decades, a lot of attention is focused on the oxygen-free radicals and inflammatory response markers as important factors of skeletal injury. Thus, the aim of the present study was to follow the changes in redox balance and inflammatory response in elderly patients with femoral fractures during the earliest stages of fracture healing, by measuring the values of the observed markers immediately after fracture, as well as the first, third, and seventh postoperative day. Present study was performed on a group of 65 elderly patients with femoral neck fractures, recruited from the Orthopedic Clinic, Clinical Centre Kragujevac in the period from February to May 2015. Redox status was measured spectrophotometrically and evaluated by measuring the levels of index of lipid peroxidation (measured as TBARS), nitrite (NO2-), superoxide anion radical (O2-), and hydrogen peroxide (H2O2) in plasma, while activities of corresponding antioxidative enzymes, catalase (CAT), superoxide dismutase (SOD), and reduced glutathione (GSH) were measured in erythrocytes. The cytokine concentrations of interleukin (IL)-6 and tumor necrosis factor (TNF)-α were determined in plasma, using ELISA assays specific for human cytokines. Our study showed that redox status and TNF-α in elderly patients with femoral fractures did not show statistically significant changes during the early phase of fracture healing. On the other hand, IL-6 increased statistically in first day after intervention. This preliminary study has shown our observations, and we hope that these results may help in better understanding mechanisms which are included at fracture healing. More importantly, this study attempted to create a platform for further research.

Achieving enhanced ionic mobility in nanoporous silica by controlled surface interactions.

We report a strategy to enhance the ionic mobility in an emerging class of gels, based on robust nanoporous silica micro-particles, by chemical functionalization of the silica surface. Two very different ionic liquids are used to fill the nano-pores of silica at varying pore filling factors, namely one aprotic imidazolium based (1-methyl-3-hexylimidazolium bis(trifluoromethanesulfonyl)imide, C6C1ImTFSI), and one protic ammonium based (diethylmethylammonium methanesulfonate, DEMAOMs) ionic liquid. Both these ionic liquids display higher ionic mobility when confined in functionalized silica as compared to untreated silica nano-pores, an improvement that is more pronounced at low pore filling factors (i.e. in the nano-sized pore domains) and observed in the whole temperature window investigated (i.e. from -10 to 140 °C). Solid-state NMR, diffusion NMR and dielectric spectroscopy concomitantly demonstrate this effect. The origin of this enhancement is explained in terms of weaker intermolecular interactions and a consequent flipped-ion effect at the silica interface strongly supported by 2D solid-state NMR experiments. The possibility to significantly enhance the ionic mobility by controlling the nature of surface interactions is extremely important in the field of materials science and highlights these structurally tunable gels as promising solid-like electrolytes for use in energy relevant devices. These include, but are not limited to, Li-ion batteries and proton exchange membrane (PEM) fuel cells.

The Orientation of Nanoscale Apatite Platelets in Relation to Osteoblastic-Osteocyte Lacunae on Trabecular Bone Surface.

The orientation of nanoscale mineral platelets was quantitatively evaluated in relation to the shape of lacunae associated with partially embedded osteocytes (osteoblastic-osteocytes) on the surface of deproteinised trabecular bone of adult sheep. By scanning electron microscopy and image analysis, the mean orientation of mineral platelets at the osteoblastic-osteocyte lacuna (Ot.Lc) floor was found to be 19° ± 14° in the tibia and 20° ± 14° in the femur. Further, the mineral platelets showed a high degree of directional coherency: 37 ± 7% in the tibia and 38 ± 9% in the femur. The majority of Ot.Lc in the tibia (69.37%) and the femur (74.77%) exhibited a mean orientation of mineral platelets between 0° and 25°, with the largest fraction within a 15°-20° range, 17.12 and 19.8% in the tibia and femur, respectively. Energy dispersive X-ray spectroscopy and Raman spectroscopy were used to characterise the features observed on the anorganic bone surface. The Ca/P (atomic %) ratio was 1.69 ± 0.1 within the Ot.Lc and 1.68 ± 0.1 externally. Raman spectra of NaOCl-treated bone showed peaks associated with carbonated apatite: ν1, ν2 and ν4 PO4(3-), and ν1 CO3(2-), while the collagen amide bands were greatly reduced in intensity compared to untreated bone. The apatite-to-collagen ratio increased considerably after deproteinisation; however, the mineral crystallinity and the carbonate-to-phosphate ratios were unaffected. The ~19°-20° orientation of mineral platelets in at the Ot.Lc floor may be attributable to a gradual rotation of osteoblasts in successive layers relative to the underlying surface, giving rise to the twisted plywood-like pattern of lamellar bone.

Formation and relaxation kinetics of starch-particle complexes.

The formation and relaxation kinetics of starch-particle complexes were investigated in this study. The combination of cationic nanoparticles in suspension and anionic starch in solution gave rise to aggregate formation which was studied by dynamic light scattering, revealing the initial adsorption of the starch molecules on the particle surface. By examining the stability ratio, W, it was found that even in the most destabilized state, i.e. at charge neutralization, the starch chains had induced steric stabilization to the system. At higher particle and starch concentrations relaxation of the aggregates could be seen, as monitored by a decrease in turbidity with time. This relaxation was evaluated by fitting the data to the Kohlrausch-Williams-Watts function. It was found that irrespective of the starch to particle charge ratio the relaxation time was similar. Moreover, a molecular weight dependence on the relaxation time was found, as well as a more pronounced initial aggregated state for the higher molecular weight starch. This initial aggregate state could be due to bridging flocculation. With time, as the starch chains have relaxed into a final conformation on the particle surface, bridging will be less important and is gradually replaced by patches that will cause patchwise flocculation. After an equilibration time no molecular weight dependence on aggregation could be seen, which confirms the patchwise flocculation mechanism.

Competitive adsorption of amylopectin and amylose on cationic nanoparticles: a study on the aggregation mechanism.

In this study we investigate the interactions between cationic nanoparticles and anionic starch, where the starch was composed of 20 wt% of amylose, a linear polymer, and 80 wt% of amylopectin, a branched polymer. The mechanism of aggregation was investigated by scattering techniques. It was found that the cationic particles formed large aggregates with the starch as a result of selective adsorption of the amylopectin. Amylose did not participate significantly in the aggregate formation even when the charge ratio of starch to particles was <1. For starch to particle ratio >1 stabilization was recovered mostly due to the large hindrance brought about by the highly branched amylopectin. This results in a shift of the stabilization mechanism from electrostatic to electrosteric. The internal structure of the aggregates was composed of primary particles with starch coils adsorbed on the surface. This information supports the proposed aggregation mechanism, which is based on adsorption of the negatively charged starch in patches on the positively charged nanoparticles causing attractive interaction between the particles.

Enhanced low-temperature ionic conductivity via different Li+ solvated clusters in organic solvent/ionic liquid mixed electrolytes.

We investigate Li+ coordination in mixed electrolytes based on ionic liquids (ILs) and organic solvents and its relation with the macroscopic properties such as phase behaviour and ionic conductivity. Using Raman spectroscopy we determine the solvation shell around Li+ in mixtures formed by the IL N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide, the organic solvents ethylene carbonate and dimethyl carbonate (EC : DMC 1 : 1), and the salt LiTFSI. We find that the organic solvent molecules preferentially solvate Li+ as long as there are enough of them. Our results are consistent with a model where Li(EC)3(DMC)1 and Li(EC)2(DMC)2 are the main complexes formed by the organic solvent molecules and where TFSI- mainly participates in Li(TFSI)2- clusters. As the amount of organic solvent is increased, the number of TFSI- around Li+ rapidly decreases showing a higher affinity of the organic solvents to solvate Li+. The changes in the local configurations are also reflected in the ionic conductivity and the phase behaviour. The formation of larger clusters leads to a decrease in the conductivity, whereas the presence of several different clusters at intermediate compositions effectively hinders crystallization at low temperatures. The result is an enhanced low-temperature ionic conductivity in comparison with the pure IL or organic solvent electrolytes.

Infrared assessment of knee instability in ACL deficient patients.

PURPOSE: Previous clinical studies have shown that anterior cruciate ligament (ACL) ruptures require reconstructive surgery. The main goal of this study is an objective test definition for unstable knee diagnosis based on real measurements by using infrared cameras and adequate software. METHODS: In the study of gait analysis 35 males with deficient ACL's participated. Pathological parameters for anterior posterior translation (APT) and internal external rotation (IER) and their values of kinematic data were obtained from a gait analysis 3D system. Movement curves were obtained by recording the position of fluorescent markers over time. A machine learning algorithm was developed in order to support decisions on the severity of the ACL injury and its corresponding deficiency. The algorithm was based on logistic regression. RESULTS: The value of APT, designated as exponentiation of the Ó¨ coefficient (Exp (Ó¨)) of APT, showed that the likelihood of ACL-deficient knee occurrence due to higher values of APT is 1.1758 (95 % CI) times more frequent than that of the patients with lower values of APT. The value of IER, designated as Exp (Ó¨) of IER, showed that the patients with higher values of IER present 2.2516 (95 % CI) times higher values of ACL-deficient knee frequency than those with lower values. CONCLUSION: This study showed that the creation of ordered pairs of pathological parameters gives a wider picture of ACL deficiency and that such an algorithm may improve both examination and treatment of patients.

The effect of lithium salt doping on the nanostructure of ionic liquids.

In this work we report on the evolution of the structure of two model ionic liquid families, N-alkyl-N-methylpyrrolidinium (Pyr1n-TFSI) and 1-alkyl-3-methylimidazolium (CnMIm-TFSI) (n = 3, 4, 6 and 8) both containing the bis(trifluoromethanesulfonyl)imide (TFSI) anion, upon the addition of LiTFSI using small angle X-ray scattering (SAXS). The introduction of a lithium salt (Li-salt) tunes the interactions through the substitution of the large cation in the ionic liquid with the small and charge localized lithium ion, thus increasing the coulombic contribution from ion-ion interactions. We find that the introduction of lithium ions results in a restructuring of the polar groups in the ionic liquids. These changes are manifested as an increase in the correlation lengths related to charge alternation of the ions and a more disordered structure. This restructuring is interpreted as a reconfiguration of the anions as they coordinate to the small and ionic lithium. In contrast, the length scale of the mesoscopic heterogeneities related to the clustering of alkyl chains is virtually unchanged with lithium doping. Moreover, the correlation corresponding to alkyl chain domains becomes more well defined with increasing salt concentration, suggesting that Li-salt doping, i.e. an increased columbic interaction in the system, promotes clustering of the alkyl tails.