Polyacrylonitrile-chalcogel hybrid sorbents for radioiodine capture.

Powders of a Sn2S3 chalcogen-based aerogel (chalcogel) were combined with powdered polyacrylonitrile (PAN) in different mass ratios (SnS33, SnS50, and SnS70; # = mass% of chalcogel), dissolved in dimethyl sulfoxide, and added dropwise to deionized water to form pellets of a porous PAN-chalcogel hybrid material. These pellets, along with pure powdered (SnSp) and granular (SnSg) forms of the chalcogel, were then used to capture iodine gas under both dynamic (dilute) and static (concentrated) conditions. Both SnSp and SnSg chalcogels showed very high iodine loadings at 67.2 and 68.3 mass%, respectively. The SnS50 hybrid sorbent demonstrated a high, although slightly reduced, maximum iodine loading (53.5 mass%) with greatly improved mechanical rigidity. In all cases, X-ray diffraction results showed the formation of crystalline SnI4 and SnI4(S8)2, revealing that the iodine binding in these materials is mainly due to a chemisorption process, although a small amount of physisorption was observed.

Chalcogen-based aerogels as sorbents for radionuclide remediation.

The efficient capture of radionuclides with long half-lives such as technetium-99 ((99)Tc), uranium-238 ((238)U), and iodine-129 ((129)I) is pivotal to prevent their transport into groundwater and/or release into the atmosphere. While different sorbents have been considered for capturing each of them, in the current work, nanostructured chalcogen-based aerogels called chalcogels are shown to be very effective at capturing ionic forms of (99)Tc and (238)U, as well as nonradioactive gaseous iodine (i.e., a surrogate for (129)I2), irrespective of the sorbent polarity. The chalcogel chemistries studied were Co0.7Bi0.3MoS4, Co0.7Cr0.3MoS4, Co0.5Ni0.5MoS4, PtGe2S5, and Sn2S3. The PtGe2S5 sorbent performed the best overall with capture efficiencies of 98.0% and 99.4% for (99)Tc and (238)U, respectively, and >99.0% for I2(g) over the duration of the experiment. The capture efficiencies for (99)Tc and (238)U varied between the different sorbents, ranging from 57.3-98.0% and 68.1-99.4%, respectively. All chalcogels showed >99.0% capture efficiency for iodine over the test duration. This versatile nature of chalcogels can provide an attractive option for the environmental remediation of the radionuclides associated with legacy wastes from nuclear weapons production as well as wastes generated during nuclear power production or nuclear fuel reprocessing.

Evaluation of materials for iodine and technetium immobilization through sorption and redox-driven processes.

Radioactive iodine-129 (129I) and technetium-99 (99Tc) pose a risk to groundwater due to their long half-lives, toxicity, and high environmental mobility. Based on literature reviewed in Moore et al. (2019) and Pearce et al. (2019), natural and engineered materials, including iron oxides, low-solubility sulfides, tin-based materials, bismuth-based materials, organoclays, and metal organic frameworks, were tested for potential use as a deployed technology for the treatment of 129I and 99Tc to reduce environmental mobility. Materials were evaluated with metrics including capacity for IO3- and TcO4- uptake, selectivity and long-term immobilization potential. Batch testing was used to determine IO3- and TcO4- sorption under aerobic conditions for each material in synthetic groundwater at different solution to solid ratios. Material association with IO3- and TcO4- was spatially resolved using scanning electron microscopy and X-ray microprobe mapping. The potential for redox reactions was assessed using X-ray absorption near edge structure spectroscopy. Of the materials tested, bismuth oxy(hydroxide) and ferrihydrite performed the best for IO3-. The commercial Purolite A530E anion-exchange resin outperformed all materials in its sorption capacity for TcO4-. Tin-based materials had high capacity for TcO4-, but immobilized TcO4- via reductive precipitation. Bismuth-based materials had high capacity for TcO4-, though slightly lower than the tin-based materials, but did not immobilize TcO4- by a redox-drive process, mitigating potential negative re-oxidation effects over longer time periods under oxic conditions. Cationic metal organic frameworks and polymer networks had high Tc removal capacity, with TcO4- trapped within the framework of the sorbent material. Although organoclays did not have the highest capacity for IO3- and TcO4- removal in batch experiments, they are available commercially in large quantities, are relatively low cost and have low environmental impact, so were investigated in column experiments, demonstrating scale-up and removal of IO3- and TcO4- via sorption, and reductive immobilization with iron- and sulfur-based species.

Silver-functionalized silica aerogels and their application in the removal of iodine from aqueous environments.

One of the key challenges for radioactive waste management is the efficient capture and immobilization of radioiodine, because of its radiotoxicity, high mobility in the environment, and long half-life (t1/2 = 1.57 × 107 years). Silver-functionalized silica aerogel (AgAero) represents a strong candidate for safe sequestration of radioiodine from various nuclear waste streams and subsurface environments. Batch sorption experiments up to 10 days long were carried out in oxic and anoxic conditions in both deionized water (DIW) and various Hanford Site Waste Treatment Plant (WTP) off-gas condensate simulants containing from 5 to 10 ppm of iodide (I-) or iodate (IO3-). Also tested was the selectivity of AgAero towards I- in the presence of other halide anions. AgAero exhibited fast and complete removal of I- from DIW, slower but complete removal of I- from WTP off-gas simulants, preferred removal of I- over Br- and Cl-, and it demonstrated ability to remove IO3- through reduction to I-.

Investigating the Durability of Iodine Waste Forms in Dilute Conditions.

To prevent the release of radioiodine during the reprocessing of used nuclear fuel or in the management of other wastes, many technologies have been developed for iodine capture. The capture is only part of the challenge as a durable waste form is required to ensure safe disposal of the radioiodine. This work presents the first durability studies in dilute conditions of two AgI-containing waste forms: hot-isostatically pressed silver mordenite (AgZ) and spark plasma sintered silver-functionalized silica aerogel (SFA) iodine waste forms (IWF). Using the single-pass flow-through (SPFT) test method, the dissolution rates respective to Si, Al, Ag and I were measured for variants of the IWFs. By combining solution and solid analysis information on the corrosion mechanism neutral-to-alkaline conditions was elucidated. The AgZ samples were observed to have corrosion preferentially occur at secondary phases with higher Al and alkali content. These phases contained a lower proportion of I compared with the matrix. The SFA samples experienced a higher extent of corrosion at Si-rich particles, but an increased addition of Si to the waste led to an improvement in corrosion resistance. The dissolution rates for the IWF types are of similar magnitude to other Si-based waste form materials measured using SPFT.

Silver-functionalized silica aerogel: towards an understanding of aging on iodine sorption performance.

The silver-functionalized silica aerogel (Ag0-aerogel) is being developed for the removal and sequestration of iodine compounds from the off-gas of a nuclear fuel reprocessing plant. This material shows high selectivity and sorption capacity for iodine. However, its sorption performance decreases when exposed to air containing H2O and NO x at 150 °C for extended periods of time. This phenomenon is referred to as "aging" and simulates exposure of the sorbent during plant idling. This extensive study of unaged and aged samples of Ag0-aerogel with and without iodine revealed that decreased efficiency of I capture after NO-aging can be attributed to an increase in size of silver nanoparticles and by the formation of free sulfate on their surfaces from oxidized thiol groups. The smaller reactive surface areas of bigger particles and thin sulfate layer on particle surfaces prevented a complete utilization of the silver. By contrast, formation of silver sulfate appears to be the main factor in decreasing the sorption capacity for samples aged in dry or humid air. It is hypothesized that a short period exposure of the Ag0-aerogel to a reducing gas stream would reduce oxidized silver back to metal and sulfate to sulfide. This may recover the sorption performance of Ag0-aerogel close to original levels.

Silver-Loaded Aluminosilicate Aerogels As Iodine Sorbents.

In this paper, aluminosilicate aerogels were used as scaffolds for silver nanoparticles to capture I2(g). The starting materials for these scaffolds included Na-Al-Si-O and Al-Si-O aerogels, both synthesized from metal alkoxides. The Ag0 particles were added by soaking the aerogels in aqueous AgNO3 solutions followed by drying and Ag+ reduction under H2/Ar to form Ag0 crystallites within the aerogel matrix. In some cases, aerogels were thiolated with 3-(mercaptopropyl)trimethoxysilane as an alternative method for binding Ag+. During the Ag+-impregnation steps, for the Na-Al-Si-O aerogels, Na was replaced with Ag, and for the Al-Si-O aerogels, Si was replaced with Ag. The Ag-loading of thiolated versus nonthiolated Na-Al-Si-O aerogels was comparable at ∼35 atomic %, whereas the Ag-loading in unthiolated Al-Si-O aerogels was significantly lower at ∼7 atomic % after identical treatment. Iodine loadings in both thiolated and unthiolated Ag0-functionalized Na-Al-Si-O aerogels were >0.5 mI ms-1 (denoting the mass of iodine captured per starting mass of the sorbent) showing almost complete utilization of the Ag through chemisorption to form AgI. Iodine loading in the thiolated and Ag0-functionalized Al-Si-O aerogel was 0.31 mI ms-1. The control of Ag uptake over solution residence time and [Ag] demonstrates the ability to customize the Ag-loading in the base sorbent to regulate the loading capacity of iodine.