Nanoplastic Sample Cleanup by Micro-Electromembrane Extraction across Free Liquid Membranes.

Sample preparation techniques enabling the separation and cleanup of nanoplastics removing other components present in complex sample matrices are scarce. Herein, micro-electromembrane extraction (µ-EME) has been explored for this purpose based on the extraction of nanoplastic particles across a free liquid membrane (FLM). The extraction unit is based on a perfluoroalkoxy tube sequentially filled with the acceptor solution (20 µL 5 mM phosphate buffer, pH 10.7), FLM (10 µL 1-pentanol), and donor solution (20 µL sample/standard solution). Sulfonated polystyrene beads (200 nm particle size) were selected as a model mimicking negatively charged nanoplastics. At 700 V, nanoplastics transferred from the donor solution into the FLM before moving across the FLM into the acceptor solution. Quantitative nanoplastic measurements after µ-EME were performed by injecting the acceptor solution into a capillary electrophoresis system with diode array detection. µ-EME allowed the rapid nanoplastic sample cleanup, requiring an extraction time of just 90 s and obtaining a nanoplastic transfer yield through the FLM of 60% with RSD values below 9%. The µ-EME technique enabled the efficient sample matrix cleanup of nanoplastics spiked in different tea matrices. Nanoplastic transfer yield through the FLM for black tea and flavored tea matrices were 56% and 47%, respectively, with complete sample matrix removal of UV-absorbing compounds.

Bidimensional Dynamic Magnetic Levitation: Sequential Separation of Microplastics by Density and Size.

There is a current gap in sample preparation techniques integrating the separation of microplastics according to their different material types and particle sizes. We describe herein the Bidimensional Dynamic Magnetic Levitation (2D-MagLev) technique, enabling the resolution of mixtures of microplastics sorting them by plastic type and particle size. Separations are carried out in a bespoke flow cell sandwiched between two ring magnets and connected to programmable pumps for flow control. The first separation dimension is based on sequential increases in the concentration of a paramagnetic salt (MnCl2), enabling magnetic levitation of microplastics with determined densities. The second dimension is based on increasing flow rate gradients and maintaining constant MnCl2 concentrations. This fractionates the magnetically levitating microplastics according to their different particle sizes. Microplastics are therefore collected by their increasing density, and the particles corresponding to each density are fractionated from smaller to larger size. Using polyethylene microspheres with defined density (1.03-1.13 g cm-3) and size (98-390 µm) as microplastic mimicking materials, we investigated their optimum threshold velocities for their size fractionation, potential effects of medium viscosity and sample loading, and types of flow rate gradients (linear, step). Performing a separation using a combination of step gradients in both MnCl2 concentration and flow rate, mixtures comprising microplastics of two different densities and three different particle sizes were separated. 2D-MagLev is simple, fast, versatile, and robust, opening new avenues to facilitate the study of the environmental presence and impact of microplastics.

Sponge-nested polymer monoliths: Versatile materials for the solid-phase extraction of bisphenols.

Polymer monoliths are promising materials for sample preparation due to their high porosity, pH stability, and simple preparation. The use of melamine formaldehyde foams has been reported as an effective support to prepare highly robust silica and polymer monoliths. Herein, divinylbenzene monoliths based on a 50:50 (%, w/w) crosslinker/porogen ratio have been nested within a melamine-formaldehyde sponge, resulting in monoliths with a surface area higher than 400 m2 /g. The extraction performance of these monoliths was evaluated for the extraction of endocrine-disrupting bisphenols from aqueous solutions. We evaluated for the first time the versatility of sponge-nested polymer monoliths by comparing three different extraction modes (vortex mixing, magnetic stirring, and orbital shaking). Vortex mixing showed a comparable recovery of bisphenols (39%-81%) in a shorter extraction time (30 min, instead of 2 h). In addition, the robustness of the sponge-nested polymer monoliths was demonstrated for the first time by reshaping a larger monolithic cube (0.125 cm3 ) into four smaller pieces (4 × 0.03125 cm3 ) leading to a 16%-21% increase in extraction efficiency. This effect was attributed to an increase in the effective contact area with the sample, obtaining a higher analyte extraction capacity.

A miniaturized analytical system with packed epoxy-functionalized mesoporous organosilica for copper determination using a customized Android-based software.

A smartphone-assisted determination of copper ions is introduced by using a down-scaled microfluidic mixer. The system was coupled with a micro-column packed with a periodic mesoporous organosilica (PMO) material for preconcentration of copper ions. Copper ions were reduced to Cu(I) on-chip to selectively form an orange-colored complex with neocuproine. A novel Android-based software was made to determine the color change of the adsorbent by analyzing red-green-blue (RGB) components of images from the packed PMO material. Four porous framework materials with high porosity and chemical stability were synthesized and compared for the extraction of the Cu-neocuproine complex. The main parameters influencing the complex extraction efficiency were optimized. The analytical performance of the method showed limit of detection and quantification of 0.2 µg L-1 and 0.5 µg L-1, respectively. The accuracy and precision of the method were determined as recovery > 92% and relative standard deviations < 5.2% at medium concentration level (n = 5). Due to accumulation of the retained analyte in a single point and elimination of the stripping step, the RGB-based method showed sensitivity and precision higher than inductively coupled plasma-atomic emission spectrometry (ICP-AES) for determination of copper ions. To investigate the applicability of the method, six different water samples were analyzed. The t-test on the data showed that the method has no significant difference when compared with ICP-AES determination.

Magnetism-Assisted Density Gradient Separation of Microplastics.

A versatile method for the efficient separation of different types of microplastics from particle mixtures is presented. Magnetism-assisted density gradient separation (Mag-DG-Sep) relies on a bespoke separation cell connected to a gradient pump and located between two like-pole-facing neodymium magnets. In Mag-DG-Sep, particle mixtures initially sunk in water are subjected to a gradient of increasing concentration of MnCl2, enabling the sequential suspension and collection of particles with different densities. The suspension process is assisted by the paramagnetism of the MnCl2 solution placed between the two magnets, which contributes to focusing the ascending particles from the bottom of the separation cell to the outlet, thus enhancing the resolution of the separation process. To demonstrate the concept, a mixture of polyethylene (PE) polymer particles with a similar size range (180-212 µm) but different densities (ca. 0.98, 1.025, 1.08, and 1.35 g cm-3) was selectively separated in a single Mag-DG-Sep run. These particles were also efficiently separated when mixed with other types of particles, such as glass or soil. A generic linear MnCl2 gradient can be directly applied for sample screening covering a broad range of densities (0.98-2.20 g cm-3), while steps can be introduced in the gradient, increasing the separation resolution of particles with close densities (1.025-1.08 g cm-3). As a proof-of-concept application, Mag-DG-Sep facilitated sample preparation of microplastics present in a soil sample prior to their examination by attenuated total reflection Fourier-transform infrared spectroscopy.

Biphasic Magnetic Levitation to Detect Organic Pollutants on Microplastics.

Microplastics have the potential to adsorb organic pollutants due to their lipophilic nature. Evaluating the distribution of multiple organic pollutants in different types of microplastics coexisting in a sample is a strenuous and challenging analytical task. Here, we report position-dependent microplastic trapping in a biphasic medium comprising a paramagnetic aqueous donor phase containing the mixed microplastics and a diamagnetic organic acceptor phase. Depending on the relative height of the sample container positioned in a magnetic field, the selective density-dependent trapping of microplastics is achieved. Concurrently, the organic pollutants adsorbed on the microplastics are desorbed in the organic acceptor phase, which is easily solidified, separated, and transferred for organic pollutant determination by high-performance liquid chromatography. This facilitates analytical studies involving multiple organic pollutants distributed in solid heterogeneous mixtures.

Recent trends on the implementation of reticular materials in column-centered separations.

Advances in the development of column-based analytical separations are strongly linked to the development of novel materials. Stationary phases for chromatographic separation are usually based on silica and polymer materials. Nevertheless, recent advances have been made using porous crystalline reticular materials, such as metal-organic frameworks and covalent organic frameworks. However, the direct packing of these materials is often limited due to their small crystal size and nonspherical shape. In this review, recent strategies to incorporate porous crystalline materials as stationary phases for liquid-phase separations are covered. Moreover, we discuss the potential future directions in their development and integration into suitable supports for analytical applications. Finally, we discuss the main challenges to be solved to take full advantage of these materials as stationary phases for analytical separations.

Zeolitic imidazolate frameworks in analytical sample preparation.

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.

Porogens and porogen selection in the preparation of porous polymer monoliths.

Porogens are key components required for the preparation of porous polymer monoliths for application in separation science. Porogens determine the stability, selectivity, and permeability of polymer monoliths. This review summarizes the role of porogens in the preparation of porous polymer monoliths with a focus on clear understanding of effect of porogens on morphological properties, porosity, surface area, mechanical stability, and permeability of monoliths, particularly targeting the field of separation science. This review also includes the use of different types of porogens with the focus on various approaches used to set criteria for their systematic selection, including porogen-free techniques recently used for synthesis of porous monoliths. It discusses the current state-of-the-art applications of porogens in column preparation as well as where the future developments in this field may be directed.

3D Printing in analytical sample preparation.

In the last 5 years, additive manufacturing (three-dimensional printing) has emerged as a highly valuable technology to advance the field of analytical sample preparation. Three-dimensional printing enabled the cost-effective and rapid fabrication of devices for sample preparation, especially in flow-based mode, opening new possibilities for the development of automated analytical methods. Recent advances involve membrane-based three-dimensional printed separation devices fabricated by print-pause-print and multi-material three-dimensional printing, or improved three-dimensional printed holders for solid-phase extraction containing sorbent bead packings, extraction disks, fibers, and magnetic particles. Other recent developments rely on the direct three-dimensional printing of extraction sorbents, the functionalization of commercial three-dimensional printable resins, or the coating of three-dimensional printed devices with functional micro/nanomaterials. In addition, improved devices for liquid-liquid extraction such as extraction chambers, or phase separators are opening new possibilities for analytical method development combined with high-performance liquid chromatography. The present review outlines the current state-of-the-art of three-dimensional printing in analytical sample preparation.

Recent strategies to enhance the performance of polymer monoliths for analytical separations.

This review summarizes recent developments made in the incorporation of functional materials into organic polymer monoliths, together with new monolithic forms and formats, which enhance their application as supports and stationary phase materials for sample preparation and chromatographic separations. While polymer monoliths are well-known supports for the separation of large molecules, recent developments have been made to improve their features for the separation of small molecules. The selectivity and performance of organic polymer monoliths has been improved by the incorporation of different materials, such as metal-organic frameworks, covalent organic frameworks, or other types of nanostructured materials (carbon nanohorns, nanodiamonds, polyoxometalates, layered double hydroxides, or attapulgite). The surface area of polymer monoliths has been significantly increased by polymer hypercrosslinking, resulting in increased efficiency when applied to the separation of small molecules. In addition, recent exploration of less conventional supports for casting polymer monoliths, including photonic fibres and 3D printed materials, has opened new avenues for the applications of polymer monoliths in the field of separation science. Recent developments made in these topics are covered, focusing on the strategies followed by the authors to prepare the polymer monoliths and the effect of these modifications on the developed analytical applications.

Ordered macro/micro-porous metal-organic framework of type ZIF-8 in a steel fiber as a sorbent for solid-phase microextraction of BTEX.

An ordered array of macropores on microporous metal-organic framework crystals was developed. This array facilitates analyte diffusion in microextraction applications. A prototypical zeolitic imidazolate framework (ZIF-8) was synthesized in the interstitial voids of a polystyrene bead packing of sub-µm polystyrene beads. After removal of polystyrene by dimethylformamide, a single-crystal ordered macroporous ZIF-8 material (SOM-ZIF-8) was obtained. The resulting µm-sized SOM-ZIF-8 crystals are based on a fully-microporous structure containing a macroporous network. The SOM-ZIF-8 crystals were placed in a stainless-steel fiber and applied as a sorbent for the extraction of benzene, toluene, ethylbenzene, and xylenes (BTEX) by headspace solid-phase microextraction (HS-SPME). The fiber was applied to the HS-SPME of BTEX from wastewater samples followed by GC with flame ionization detection. A Plackett-Burman design and Box-Behnken design were carried out to evaluate the variables affecting the method. Figures of merit include (a) limits of detection of 1.0-12 ng·L-1, (b) linear ranges of 0.004-50 µg·L-1, (c) relative standard deviations of 4.6-6.7%, and (d) excellent fiber-to-fiber reproducibility (5.6-6.7% for n = 3). Spiking recoveries between 92 and 106% were obtained for BTEX analysis in wastewater samples. The introduction of an ordered macroporous network on microporous ZIF-8 crystals enhanced analyte uptake. This increases the extraction performance by a factor of 2.5-3.1 when compared to analogous ZIF-8 crystals that lack templated macropores. Graphical abstract BTEX extraction is enhanced by templating an ordered macroporous network in microporous crystals as exemplified with the single-crystal ordered macropore zeolitic imidazolate framework-8 (SOM-ZIF-8). Graphical Abstract contains poor quality of image inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.The file in original format has been attached.

Nanoparticle@Metal-Organic Frameworks as a Template for Hierarchical Porous Carbon Sponges.

The preparation of hierarchical porous carbon sponges (HCS) from metal oxide nanoparticle@metal-organic frameworks is reported. ZnO nanoparticles are partially converted to zeolitic imidazolate framework-8 (ZIF-8) crystals in presence of n-butylamine to obtain ZnO@ZIF-8 porous hybrids. After direct carbonization, followed by ZnO acidic etching, ZnO@ZIF-8 crystals were converted to submicrometric HCS. Due to the high surface area and accessible porosity, combining micro- and mesoporosity of HCS, their application for the extraction of water pollutants was studied by preparing HCS/polymer membranes, and showed a high efficiency for the fast (650 L m-2 h-1 ) removal of plastic degradation by-products (DBP, dibutyl phthalate. DEHP, bis(2-n-ethylhexyl)phthalate). DBP and DEHP breakthroughs were lower than 3 % after the filtration of 100 mL of water containing simultaneously both phthalates at a high concentration level (300 µg L-1 , each). HCS/polymer membranes were reusable up to 5 times, maintaining their extraction capacity, with relative errors of 6 % for DBP, and <1 % for DEHP.

Emerging materials for sample preparation.

This review provides an update on the implementation of emerging materials as sorbents for sample preparation in combination with chromatographic separation. We have focused on recent applications of metal-organic frameworks, layered double hydroxides, porous carbons obtained from polymers or biomass precursors, and silicates (clays and zeolites). The review is directed toward the strategies followed by the authors to engineer suitable supports enabling the application of materials with unconventional size and shape as high-performance sorbents to explore new boundaries in sample pretreatment in manual or automated modes.

Automated solid-phase extraction of phenolic acids using layered double hydroxide-alumina-polymer disks.

The application of layered double hydroxide-Al2 O3 -polymer mixed-matrix disks for solid-phase extraction is reported for the first time. Al2 O3 is embedded in a polymer matrix followed by an in situ metal-exchange process to obtain a layered double hydroxide-Al2 O3 -polymer mixed-matrix disk with excellent flow-through properties. The extraction performance of the prepared disks is evaluated as a proof of concept for the automated extraction using sequential injection analysis of organic acids (p-hydroxybenzoic acid, 3,4-dihydroxybenzoic acid, gallic acid) following an anion-exchange mechanism. After the solid-phase extraction, phenolic acids were quantified by reversed-phase high-performance liquid chromatography with diode-array detection using a core-shell silica-C18 stationary phase and isocratic elution (acetonitrile/0.5% acetic acid in pure water, 5:95, v/v). High sensitivity and reproducibility were obtained with limits of detection in the range of 0.12-0.25 µg/L (sample volume, 4 mL), and relative standard deviations between 2.9 and 3.4% (10 µg/L, n = 6). Enrichment factors of 34-39 were obtained. Layered double hydroxide-Al2 O3 -polymer mixed-matrix disks had an average lifetime of 50 extractions. Analyte recoveries ranged from 93 to 96% for grape juice and nonalcoholic beer samples.

In-syringe dispersive µ-SPE of estrogens using magnetic carbon microparticles obtained from zeolitic imidazolate frameworks.

Herein, we propose for the first time the use of magnetic porous carbons (MPCs) derived from zeolitic imidazolate frameworks (ZIFs) for the automated in-syringe magnetic dispersive micro-solid phase extraction (D-µ-SPE) of environmental pollutants prior to their analysis using GC-MS. MPCs with dual porosity are obtained from the direct combustion of the ZIF-67, obtaining robust and magnetic porous carbons on the micrometer scale. As proof of concept, this material has been applied for the automated D-µ-SPE of estrogens (estrone, 17ß-estradiol, and 17α-ethynylestradiol) cataloged as Contaminants of Emergent Concern by the Environmental Protection Agency of the United States (US-EPA). The automation of the system provided a good precision given the low relative standard deviations (RSDs) obtained, ranging from 2.70 to 5.90 % for intra-day precision and from 4.6 to 9.55 % for inter-day precision. Furthermore, the clean-up and preconcentration of the sample is easy and quick, as the in-syringe magnetic D-µ-SPE is carried out in less than 20 min. The high porosity, magnetism, and good stability of the MPCs facilitated the automation of the SPE in dispersive mode enabling the analysis of samples with a complex matrix without backpressure or problems related with the clogging of the instrumentation conduits. The applicability of the method to wastewater samples has been demonstrated given the good recoveries attained ranging from 86 to 115 %. Graphical abstract In-syringe dispersive µ-SPE of estrogens using magnetic carbon microparticles prior GC-MS.

Submicrometric Magnetic Nanoporous Carbons Derived from Metal-Organic Frameworks Enabling Automated Electromagnet-Assisted Online Solid-Phase Extraction.

We present the first application of submicrometric magnetic nanoporous carbons (µMNPCs) as sorbents for automated solid-phase extraction (SPE). Small zeolitic imidazolate framework-67 crystals are obtained at room temperature and directly carbonized under an inert atmosphere to obtain submicrometric nanoporous carbons containing magnetic cobalt nanoparticles. The µMNPCs have a high contact area, high stability, and their preparation is simple and cost-effective. The prepared µMNPCs are exploited as sorbents in a microcolumn format in a sequential injection analysis (SIA) system with online spectrophotometric detection, which includes a specially designed three-dimensional (3D)-printed holder containing an automatically actuated electromagnet. The combined action of permanent magnets and an automatically actuated electromagnet enabled the movement of the solid bed of particles inside the microcolumn, preventing their aggregation, increasing the versatility of the system, and increasing the preconcentration efficiency. The method was optimized using a full factorial design and Doehlert Matrix. The developed system was applied to the determination of anionic surfactants, exploiting the retention of the ion-pairs formed with Methylene Blue on the µMNPC. Using sodium dodecyl sulfate as a model analyte, quantification was linear from 50 to 1000 µg L(-1), and the detection limit was equal to 17.5 µg L(-1), the coefficient of variation (n = 8; 100 µg L(-1)) was 2.7%, and the analysis throughput was 13 h(-1). The developed approach was applied to the determination of anionic surfactants in water samples (natural water, groundwater, and wastewater), yielding recoveries of 93% to 110% (95% confidence level).

Metal Oxide Assisted Preparation of Core-Shell Beads with Dense Metal-Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants.

Dense and homogeneous metal-organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core-shell beads. The ZnO@PS beads are reactive in the presence of 2-methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework-8 (ZIF-8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF-8@ZnO@PS beads can be easily packed in column format for flow-through applications, such as the solid-phase extraction of trace priority-listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4-tert-octylphenol and 4-n-nonylphenol), facilitating their analysis when present at very low levels (<1 µg L(-1) ) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF-8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF-8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.

Automatic In-Syringe Dispersive Microsolid Phase Extraction Using Magnetic Metal-Organic Frameworks.

A novel automatic strategy for the use of micro- and nanomaterials as sorbents for dispersive microsolid phase extraction (D-µ-SPE) based on the lab-in-syringe concept is reported. Using the developed technique, the implementation of magnetic metal-organic framework (MOF) materials for automatic solid-phase extraction has been achieved for the first time. A hybrid material based on submicrometric MOF crystals containing Fe3O4 nanoparticles was prepared and retained in the surface of a miniature magnetic bar. The magnetic bar was placed inside the syringe of an automatic bidirectional syringe pump, enabling dispersion and subsequent magnetic retrieval of the MOF hybrid material by automatic activation/deactivation of magnetic stirring. Using malachite green (MG) as a model adsorption analyte, a limit of detection of 0.012 mg/L and a linear working range of 0.04-2 mg/L were obtained for a sample volume equal to the syringe volume (5 mL). MG preconcentration was linear up to a volume of 40 mL, obtaining an enrichment factor of 120. The analysis throughput is 18 h(-1), and up to 3000 extractions/g of material can be performed. Recoveries ranging between 95 and 107% were obtained for the analysis of MG in different types of water and trout fish samples. The developed automatic D-µ-SPE technique is a safe alternative for the use of small-sized materials for sample preparation and is readily implementable to other magnetic materials independent of their size and shape and can be easily hyphenated to the majority of detectors and separation techniques.