Biomechanical Testing of a Calcium Phosphate-Phosphoserine-Based Mineral-Organic Adhesive for Non-invasive Fracture Repair of Mandibular Fractures in Dogs.

Mandibular fracture repair is complicated by limited availability of bone as well as the presence of the neurovascular bundle and an abundance of tooth roots. Fractures at the location of the mandibular first molar teeth are common and it can be particularly challenging to apply stable fixation. Non-invasive fracture repair techniques utilize intraoral placement of fixation devices typically involving polymerized composites and/or interdental wiring. A novel calcium phosphate-phosphoserine-based mineral-organic adhesive was tested ex vivo to determine its effects on augmenting strength of different non-invasive fracture fixation techniques. This study both tested the use of mineral-organic adhesive for the purpose of stabilizing currently used non-invasive fracture repair constructs (intraoral composite splinting ± interdental wiring) and evaluated adhesive alone or with subperiosteally placed plates on buccal cortical bone surface. Aside from controls, not receiving an osteotomy along the mesial root of the mandibular first molar tooth, six treatment groups were tested to evaluate ultimate strength, stiffness, angular displacement, bending moment, and application time. All forms of fixation were found to be significantly weaker than control (p < 0.001). Only the control (p < 0.001) and mineral-organic adhesive and composite (P = 0.002) groups were found to be significantly stronger than wire and composite. No difference was noted in stiffness between any groups with control or wire and composite. Application times varied from the mineral-organic adhesive group (mean = 206 s) to mineral-organic adhesive and composite (mean = 1,281 s). Twenty-three fixation devices exhibited adhesive failure, 20 demonstrated cohesive failure, and 5 failed by cohesive and adhesive failure. When evaluating the ultimate strength of the fixation device groups, mineral-organic adhesive, and composite was shown to be the strongest construct. The use of resorbable bone adhesive and composite may provide a stronger fixation construct over interdental wire and composite for mandibular fracture repair in dogs.

MRI of acute bone bruises: timing of the appearance of findings in a swine model.

OBJECTIVE: We developed an animal model of bone injury to determine the timing of the MR appearance of bone bruises and to follow these changes over time. MATERIALS AND METHODS: We performed serial MRI of 16 knees of eight swine with one nontraumatized knee as a control and 15 knees traumatized by direct patellar impact injuries using a force-calibrated device. All knees were imaged on a 1.5-T scanner using an 8-channel phased-array coil with T1-weighted, fat-saturated T2-weighted and STIR sequences. Scanning was performed at 1, 6, 12, and 30 hours after impact injury. Two radiologists independently reviewed each MR examination to identify MR signal intensity changes in the patellae and adjacent femoral condyles. RESULTS: In the 15 traumatized knees, bone bruises were noted in 93% of the patellae on T1-weighted images and in 87% of the patellae on fluid-sensitive MR images at 1 hour after injury and in 100% of the patellae at 6 hours. T1-weighted images were insensitive for detection of bone bruises in the femoral condyles. Bone bruises in the femoral condyles were seen on fluid-sensitive MR sequences as early as 1 hour after injury, with an increasing frequency over the 30-hour period. CONCLUSION: Bone bruises can be seen as soon as 1 hour after trauma but may not be seen until 30 hours after trauma. Fluid-sensitive (fat-saturated, T2-weighted, and STIR) MR sequences are more sensitive than T1-weighted images in the detection of bone bruises.

3D FSE Cube and VIPR-aTR 3.0 Tesla magnetic resonance imaging predicts canine cranial cruciate ligament structural properties.

Estimation of cranial cruciate ligament (CrCL) structural properties in client-owned dogs with incipient cruciate rupture would be advantageous. The objective of this study was to determine whether magnetic resonance imaging (MRI) measurement of normal CrCL volume in an ex-vivo canine model predicts structural properties. Stifles from eight dogs underwent 3.0 Tesla 3D MRI. CrCL volume and normalized median grayscale values were determined using 3D Fast Spin Echo (FSE) Cube and Vastly under-sampled Isotropic PRojection (VIPR)-alternative repetition time (aTR) sequences. Stifles were then mechanically tested. After joint laxity testing, CrCL structural properties were determined, including displacement at yield, yield load, load to failure, and stiffness. Yield load and load to failure (R(2)=0.56, P <0.01) were correlated with CrCL volume determined by VIPR-aTR. Yield load was also correlated with CrCL volume determined by 3D FSE Cube (R(2)=0.32, P <0.05). Structural properties were not related to median grayscale values. Joint laxity and CrCL stiffness were not related to MRI parameters, but displacement at yield load was related to CrCL volume for both sequences during testing (R(2)>0.57, P <0.005). In conclusion, 3D MRI offers a predictive method for estimating canine CrCL structural properties. 3D MRI may be useful for monitoring CrCL properties in clinical trials.

Crown Preservation of the Mandibular First Molar Tooth Impacts the Strength and Stiffness of Three Non-Invasive Jaw Fracture Repair Constructs in Dogs.

Repairing mandibular body fractures presents unique challenges not encountered when repairing long bones. Large tooth roots and the presence of the inferior alveolar neurovascular bundle limit safe placement for many types of orthopedic implants. Use of non-invasive fracture repair methods have increasingly become popular and have proven safe and effective at achieving bone healing. Non-invasive fixation constructs have not been tested in dogs using cantilevered bending. Furthermore, non-invasive fracture repair constructs have not been tested at the location of a common fracture location - the mandibular first molar tooth (M1). The objectives of this study were to test the strength and stiffness of three non-invasive mandibular fracture repair constructs and to characterize the impact that tooth crown preservation has on fixation strength for fractures occurring at the M1 location. Specimens were assigned to three treatment groups: (1) composite only, (2) interdental wiring and composite (IWC), and (3) transmucosal fixation screw and composite. For each pair of mandibles, one mandible received crown amputation at the alveolar margin to simulate the effect of crown loss on fixation strength and stiffness. Regardless of the status of crown presence, IWC demonstrated the greatest bending stiffness and load to failure. With the crown removed, IWC was significantly stronger compared to other treatments. All fixation constructs were stiffer when the tooth crown was preserved. In fractures at this location, retaining the tooth crown of M1 significantly increases stiffness of interdental wiring with composite and transmucosal screw with composite constructs. If the crown of M1 was removed, IWC was significantly stronger than the other two forms of fixation.

A model for creating a single stretch injury in murine biarticular muscle.

BACKGROUND: We developed a single stretch injury model to create damage near the musculotendinous junction (MTJ) of the gastrocnemius muscle in mice. Our hypothesis was that magnitude of muscle injury could be controlled by stepped shortening of the Achilles tendon (AT) prior to a lengthening contraction. Increased shortening would result in a greater isometric torque deficit and morphological damage 24 hours post-injury. METHODS: Sixteen mice were randomly assigned to sham or injury predicated on stepped increases in AT shortening. The AT was exposed and placed in a customized stainless steel roller-clamp system to achieve a specific level of shortening; 0 mm (resting length), 0.7 mm or 1.4 mm. Plantar flexors were stimulated to tetany with a needle electrode and then actively lengthened at 450°/sec from neutral to 75° of dorsiflexion. Passive and isometric torques were measured pre- and immediately post-injury. Isometric torque was measured again 24 h post-injury. Peak isokinetic torque was recorded during eccentric injury. RESULTS: Injury resulted in decreased passive and immediate absolute isometric torque only when induced with AT shortening. The percentage of pre-injury isometric torque was significantly lower in the AT shortened groups immediately and 24 h post-injury, but was unaffected by the level of shortening. Relative isometric torque deficits were noted in the 0 mm group only 24 h post-injury. Peak isokinetic torque during injury was similar in all groups. Histological evaluation 24 h post-injury revealed increased morphological damage near the MTJ in the AT shortened groups. CONCLUSION: Single stretch with AT shortening created morphological damage near the MTJ and isometric torque deficits immediately and 24 h post-injury, but the magnitude of damage could not be titrated with stepped increases in AT shortening. This model provides an opportunity to utilize transgenic mice in order to elucidate inflammatory mediators that promote regeneration and inhibit fibrosis in order to optimize therapeutic interventions for complete functional recovery.

Computed tomographic imaging of subchondral fatigue cracks in the distal end of the third metacarpal bone in the thoroughbred racehorse can predict crack micromotion in an ex-vivo model.

Articular stress fracture arising from the distal end of the third metacarpal bone (MC3) is a common serious injury in Thoroughbred racehorses. Currently, there is no method for predicting fracture risk clinically. We describe an ex-vivo biomechanical model in which we measured subchondral crack micromotion under compressive loading that modeled high speed running. Using this model, we determined the relationship between subchondral crack dimensions measured using computed tomography (CT) and crack micromotion. Thoracic limbs from 40 Thoroughbred racehorses that had sustained a catastrophic injury were studied. Limbs were radiographed and examined using CT. Parasagittal subchondral fatigue crack dimensions were measured on CT images using image analysis software. MC3 bones with fatigue cracks were tested using five cycles of compressive loading at -7,500N (38 condyles, 18 horses). Crack motion was recorded using an extensometer. Mechanical testing was validated using bones with 3 mm and 5 mm deep parasagittal subchondral slots that modeled naturally occurring fatigue cracks. After testing, subchondral crack density was determined histologically. Creation of parasagittal subchondral slots induced significant micromotion during loading (p<0.001). In our biomechanical model, we found a significant positive correlation between extensometer micromotion and parasagittal crack area derived from reconstructed CT images (SR = 0.32, p<0.05). Correlations with transverse and frontal plane crack lengths were not significant. Histologic fatigue damage was not significantly correlated with crack dimensions determined by CT or extensometer micromotion. Bones with parasagittal crack area measurements above 30 mm2 may have a high risk of crack propagation and condylar fracture in vivo because of crack micromotion. In conclusion, our results suggest that CT could be used to quantify subchondral fatigue crack dimensions in racing Thoroughbred horses in-vivo to assess risk of condylar fracture. Horses with parasagittal crack arrays that exceed 30 mm2 may have a high risk for development of condylar fracture.