Minimizing N-Nitrosodimethylamine Formation During Disinfection of Blended Seawater and Wastewater Effluent.

Augmenting seawater with wastewater has the potential to reduce the energy demand and environmental impacts associated with seawater desalination. Alternatively, as wastewater reuse becomes more widespread, augmenting wastewater with seawater can increase the available water supply. However, the chemistry of disinfecting a blended stream has not been explored. Toxic byproducts, including N-nitrosodimethylamine (NDMA), are expected to form during disinfection, and the extent of formation will likely be a function of which stream is chlorinated and whether disinfection happens before or after blending. In this work, three blending-disinfection scenarios were modeled and experimentally evaluated in bench-scale systems treating synthetic and authentic waters. Modeling results suggested that chlorinating preblended wastewater and seawater would produce the most NDMA because it yielded the highest concentrations of bromochloramine, which was previously found to promote NDMA formation. However, chlorinating wastewater prior to blending with seawater, which modeling indicated would form the most dichloramine, produced the most NDMA in experiments. When seawater was disinfected prior to blending with wastewater, bromide likely converted most chlorine to free bromine. Bromamines formed after blending, however, did not lead to an elevated level of NDMA formation. Therefore, to minimize NDMA formation when disinfecting blended wastewater-seawater, seawater should be disinfected prior to introducing wastewater.

Bacterial dealkylation of benzalkonium chlorides in wastewater produces benzyldimethylamine, a potent N-nitrosodimethylamine precursor.

N-nitrosodimethylamine (NDMA) is a carcinogenic disinfection byproduct that forms during chloramine disinfection of municipal wastewater effluents which are increasingly used to augment drinking water supplies due to growing water scarcity. Knowledge of wastewater NDMA precursors is limited and the known pool of NDMA precursors has not closed the mass balance between precursor loading, precursor NDMA yield, and formed NDMA. Benzalkonium chlorides (BACs) are the most prevalent quaternary ammonium surfactants and have antimicrobial properties. The extensive utilization of BACs in household, commercial and industrial products has resulted in their detection in wastewater at elevated concentrations. We report the formation of a potent NDMA precursor, benzyldimethylamine (BDMA) from the biodegradation of BACs during activated sludge treatment. BDMA formation and NDMA formation potential (FP) were functions of BAC and mixed liquor suspended solids concentration at circumneutral pH, and the microbial community source. Sustained exposure to microorganisms reduced NDMA FP through successive dealkylation of BDMA to less potent precursors. BAC alkyl chain length (C8 - C16) had little impact on NDMA FP and BDMA formation because chain cleavage occurred at the C-N bond. Wastewater effluents collected from three facilities contained BDMA from 15 to 106 ng/L, accounting for an estimated 4 to 38 % of the NDMA precursor pool.