Direct Granule Feeding of Thermal Droplet Deposition 3D Printing of Porous Pharmaceutical Solid Dosage Forms Free of Plasticisers.

PURPOSE: To develop a new direct granule fed 3D printing method for manufacturing pharmaceutical solid dosage forms with porous structures using a thermal droplet deposition technology. METHODS: Eudragit® E PO was used as the model polymer, which is well-known to be not FDM printable without additives. Wet granulation was used to produce drug loaded granules as the feedstock. The flow and feedability of the granules were evaluated. The physicochemical properties and in vitro drug release performance of the granules and the printed tablets were fully characterised. RESULTS: Using the method developed by this study, Eudragit E PO was printed with a model drug into tablets with infills ranging from 30-100%, without additives. The drug was confirmed to be molecularly dispersed in the printed tablets. The printing quality and performances of the porous tablets were confirmed to be highly compliant with the pharmacopeia requirement. The level of infill density of the porous tablets had a significant effect on their in vitro drug release performance. CONCLUSION: This is the first report of thermal droplet deposition printing via direct granule feeding. The results of this study demonstrated that this new printing method can be used as a potentially valuable alternative for decentralised pharmaceutical solid dosage form manufacturing.

A custom ÄKTA avant configuration enabling automated parallel protein purification over a range of process scales.

Biologics are making up an increasing proportion of the global drug discovery pipeline. Supporting the expansion of biologics drug discovery requires higher throughput techniques for the expression, purification and characterization of both therapeutic candidates and reagents. Here we describe the programming and development of a novel ÄKTA™ instrument configuration that enables automated parallel and multistep chromatography over a range of scales. The programming strategy is offered as open source and the custom plumbing configuration was developed with off the shelf components available from Cytiva. Combined with high flow resin technology we show how this strategy can reduce the duration of a standard antibody purification process by 4.5X, from 4.5 h down to 1 h per run. An automated loading strategy was also developed to enable true walk away application of up to 24 samples and around the clock processing capability. The techniques used here to accomplish parallel multistep chromatography can be duplicated or modified for specific applications and represent a straightforward and cost-effective means to eliminate protein purification bottlenecks.

GSK3732394: a Multi-specific Inhibitor of HIV Entry.

Long-acting antiretrovirals could provide a useful alternative to daily oral therapy for HIV-1-infected individuals. Building on a bi-specific molecule with adnectins targeting CD4 and gp41, a potential long-acting biologic, GSK3732394, was developed with three independent and synergistic modes of HIV entry inhibition that potentially could be self-administered as a long-acting subcutaneous injection. Starting with the bi-specific inhibitor, an α-helical peptide inhibitor was optimized as a linked molecule to the anti-gp41 adnectin, with each separate inhibitor exhibiting at least single-digit nanomolar (or lower) potency and a broad spectrum. Combination of the two adnectins and peptide activities into a single molecule was shown to have synergistic advantages in potency, the resistance barrier, and the ability to inhibit HIV-1 infections at low levels of CD4 receptor occupancy, showing that GSK3732394 can work in trans on a CD4+ T cell. Addition of a human serum albumin molecule prolongs the half-life in a human CD4 transgenic mouse, suggesting that it may have potential as a long-acting agent. GSK3732394 was shown to be highly effective in a humanized mouse model of infection. GSK3732394 is currently in clinical trials.IMPORTANCE There continue to be significant unmet medical needs for patients with HIV-1 infection. One way to improve adherence and decrease the likelihood of drug-drug interactions in HIV-1-infected patients is through the development of long-acting biologic inhibitors. Building on a bi-specific inhibitor approach targeting CD4 and gp41, a tri-specific molecule was generated with three distinct antiviral activities. The linkage of these three biologic inhibitors creates synergy that offers a series of advantages to the molecule. The addition of human serum albumin to the tri-specific inhibitor could allow it to function as a long-acting self-administered treatment for patients with HIV infection. This molecule is currently in early clinical trials.

A Novel gp41-Binding Adnectin with Potent Anti-HIV Activity Is Highly Synergistic when Linked to a CD4-Binding Adnectin.

The N17 region of gp41 in HIV-1 is the most conserved region in gp160. mRNA selection technologies were used to identify an adnectin that binds to this region and inhibits gp41-induced membrane fusion. Additional selection conditions were used to optimize the adnectin to greater potency (5.4 ± 2.6 nM) against HIV-1 and improved binding affinity for an N17-containing helical trimer (0.8 ± 0.4 nM). Resistance to this adnectin mapped to a single Glu-to-Arg change within the N17 coding region. The optimized adnectin (6200_A08) exhibited high potency and broad-spectrum activity against 123 envelope proteins and multiple clinical virus isolates, although certain envelope proteins did exhibit reduced susceptibility to 6200_A08 alone. The reduced potency could not be correlated with sequence changes in the target region and was thought to be the result of faster kinetics of fusion mediated by these envelope proteins. Optimized linkage of 6200_A08 with a previously characterized adnectin targeting CD4 produced a highly synergistic molecule, with the potency of the tandem molecule measured at 37 ± 1 pM. In addition, these tandem molecules now exhibited few potency differences against the same panel of envelope proteins with reduced susceptibility to 6200_A08 alone, providing evidence that they did not have intrinsic resistance to 6200_A08 and that coupling 6200_A08 with the anti-CD4 adnectin may provide a higher effective on rate for gp41 target engagement.IMPORTANCE There continue to be significant unmet medical needs for patients with HIV-1 infection. One way to improve adherence and decrease the likelihood of drug-drug interactions in HIV-1-infected patients is through the development of long-acting biologic inhibitors. This study describes the development and properties of an adnectin molecule that targets the most conserved region of the gp41 protein and inhibits HIV-1 with good potency. Moreover, when fused to a similar adnectin targeted to the human CD4 protein, the receptor for HIV-1, significant synergies in potency and efficacy are observed. These inhibitors are part of an effort to develop a larger biologic molecule that functions as a long-acting self-administered regimen for patients with HIV-1 infection.

Discovery and Characterization of a Novel CD4-Binding Adnectin with Potent Anti-HIV Activity.

A novel fibronectin-based protein (Adnectin) HIV-1 inhibitor was generated using in vitro selection. This inhibitor binds to human CD4 with a high affinity (3.9 nM) and inhibits viral entry at a step after CD4 engagement and preceding membrane fusion. The progenitor sequence of this novel inhibitor was selected from a library of trillions of Adnectin variants using mRNA display and then further optimized for improved antiviral and physical properties. The final optimized inhibitor exhibited full potency against a panel of 124 envelope (gp160) proteins spanning 11 subtypes, indicating broad-spectrum activity. Resistance profiling studies showed that this inhibitor required 30 passages (151 days) in culture to acquire sufficient resistance to result in viral titer breakthrough. Resistance mapped to the loss of multiple potential N-linked glycosylation sites in gp120, suggesting that inhibition is due to steric hindrance of CD4-binding-induced conformational changes.

Assessing infant and maternal readiness for newborn discharge.

PURPOSE OF REVIEW: The review highlights the shift from prescribed length of stay (LOS) to mother-infant dyad readiness as the basis for making discharge decisions for healthy term newborns. We describe the components of readiness that should be considered in making the decision, focusing on infant clinical readiness, and maternal and familial readiness. RECENT FINDINGS: Although the Newborns' and Mothers' Health Protection Act of 1996 aimed to protect infants and mothers by establishing a minimum LOS, the American Academy of Pediatrics 2015 policy on newborn discharge acknowledges the shift from LOS-based to readiness-based discharge decision-making. Healthcare providers must consider a variety of infant and maternal characteristics in determining the appropriate time to discharge a dyad, and mothers should be actively involved in the decision-making process. Criteria for infant clinical readiness include the following: establishment of effective feeding, evaluation of jaundice risk, review and discussion of infant and household vaccination status, obtainment of specimen for metabolic screening, tests of hearing ability, assessment of sepsis risk factors, screening for congenital heart disease, and evaluation of parental knowledge about infant safety measures. Important consideration should also be given to the mother's sociodemographic vulnerabilities, maternal confidence and perception of discharge readiness, and availability of postdischarge care continuity. SUMMARY: The timing of newborn discharge should be a joint decision made by the mother and healthcare providers based on readiness. The decision should consider the infant's health status, the mother's health status, the mother's perception of readiness, and the availability of social and familial support for the mother and infant. Accessible and comprehensive support postdischarge is also important for helping infants achieve optimal health outcomes.

Pharmacology of smac mimetics; chemotype differentiation based on physical association with caspase regulators and cellular transport.

Cellular levels of inhibitor of apoptosis (IAP) proteins are elevated in multiple human cancers and their activities often play a part in promoting cancer cell survival by blocking apoptotic pathways, controlling signal transduction pathways and contributing to resistance. These proteins function through interactions of their BIR (baculoviral IAP repeat) protein domains with pathway components and these interactions are endogenously antagonized by Smac/Diablo (second mitochondrial activator of caspases/direct IAP binding protein with low isoelectric point). This report describes development of synthetic smac mimetics (SM) and compares their binding, antiproliferative and anti-tumor activities. All dimeric antagonists inhibit in vitro smac tetrapeptide binding to recombinant IAP proteins, rescue IAP-bound caspase-3 activity and show anti-proliferative activity against human A875 melanoma cells. One heterodimeric SM, SM3, binds tightly to IAP proteins in vitro and slowly dissociates (greater than two hours) from these protein complexes compared to the other antagonists. In addition, in vitro SM anti-proliferation potency is influenced by ABCB1 transporter (ATP-binding cassette, sub-family B; MDR1, P-gp) activities and one antagonist, SM5, does not appear to be an ABCB1 efflux pump substrate. All dimeric smac mimetics inhibit the growth of human melanoma A875 tumors implanted in athymic mice at well-tolerated doses. One antagonist, SM4, shows broad spectrum in vivo anti-tumor activity and modulates known pharmacodynamic markers of IAP antagonism. These data taken together demonstrate the range of diverse dimeric IAP antagonist activities and supports their potential as anticancer agents.

Manipulating drug release from 3D printed dual-drug loaded polypills using challenging polymer compositions.

Combining multiple medications in a single dosage form has emerged as an important strategy for treating complex diseases and could help tackle the growing issue of polypharmacy. In this study we investigated the suitability of different dual-drug designs for achieving simultaneous, delayed and pulsatile drug release regimes using two model formulations: an immediate release erodible system of Eudragit E PO loaded with paracetamol; and an erodible swellable system of Soluplus loaded with felodipine. Both binary formulations, despite not fused deposition modelling (FDM) printable, were successfully printed using a thermal droplet-based 3D printing method, Arburg Plastic Freeforming (APF), and exhibited good reproducibility. X-ray powder diffraction (XRPD), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and Differential Scanning Calorimetry (DSC) were used to assess drug-excipient interaction. The printed tablets were evaluated for drug release using in vitro dissolution testing. We found the simultaneous and delayed release designs were effective at generating the intended drug release profiles, giving insight into the types of dual-drug designs which can be used to create complex release profiles. In contrast the pulsatile tablet release was non-defined, highlighting the design limitations when using erodible materials.

An investigation into the effects of geometric scaling and pore structure on drug dose and release of 3D printed solid dosage forms.

A range of 3D printing methods have been investigated intensively in the literature for manufacturing personalised solid dosage forms, with infill density commonly used to control release rates. However, there is limited mechanistic understanding of the impacts of infill adjustments on in vitro performance when printing tablets of constant dose. In this study, the effects and interplay of infill pattern and tablet geometry scaling on dose and drug release performance were investigated. Paracetamol (PAC) was used as a model drug. An immediate release erodible system (Eudragit E PO) and an erodible swellable system (Soluplus) were prepared via wet granulation into granules and printed using Arburg Plastic Freeforming (APF). Both binary formulations, despite not FDM printable, were successfully APF printed and exhibited good reproducibility compared to pharmacopoeia specification. The physical form of the drug and its integrity following granulation and printing was assessed using DSC, PXRD and ATR-FTIR. Two infill patterns (SM1 and SM2) were employed to print tablets with equal porosity, but different pore size, structure and surface area to volume ratio (SA/V). Geometry scaling (tablet height and diameter) of Eudragit-PAC tablets was not found to significantly influence the release rate of the tablets with 30 to 70% infill density. When increased to 90% infill density, geometric scaling was found to have a significant effect on release rate with the constant diameter tablet releasing faster than the constant height tablet. Soluplus-PAC tablets printed using different infill patterns demonstrated similar release profiles, due to swelling. Geometric parameters were found to significantly influence release profiles for tablets printed at certain infill densities giving new insight into how software parameters can be used to tune drug release.

Pharmacologic inhibition of ghrelin receptor signaling is insulin sparing and promotes insulin sensitivity.

Ghrelin influences a variety of metabolic functions through a direct action at its receptor, the GhrR (GhrR-1a). Ghrelin knockout (KO) and GhrR KO mice are resistant to the negative effects of high-fat diet (HFD) feeding. We have generated several classes of small-molecule GhrR antagonists and evaluated whether pharmacologic blockade of ghrelin signaling can recapitulate the phenotype of ghrelin/GhrR KO mice. Antagonist treatment blocked ghrelin-induced and spontaneous food intake; however, the effects on spontaneous feeding were absent in GhrR KO mice, suggesting target-specific effects of the antagonists. Oral administration of antagonists to HFD-fed mice improved insulin sensitivity in both glucose tolerance and glycemic clamp tests. The insulin sensitivity observed was characterized by improved glucose disposal with dramatically decreased insulin secretion. It is noteworthy that these results mimic those obtained in similar tests of HFD-fed GhrR KO mice. HFD-fed mice treated for 56 days with antagonist experienced a transient decrease in food intake but a sustained body weight decrease resulting from decreased white adipose, but not lean tissue. They also had improved glucose disposal and a striking reduction in the amount of insulin needed to achieve this. These mice had reduced hepatic steatosis, improved liver function, and no evidence of systemic toxicity relative to controls. Furthermore, GhrR KO mice placed on low- or high-fat diets had lifespans similar to the wild type, emphasizing the long-term safety of ghrelin receptor blockade. We have therefore demonstrated that chronic pharmacologic blockade of the GhrR is an effective and safe strategy for treating metabolic syndrome.

Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing.

3D printing has the unique ability to produce porous pharmaceutical solid dosage forms on-demand. Although using porosity to alter drug release kinetics has been proposed in the literature, the effects of porosity on the swellable and erodible porous solid dosage forms have not been explored. This study used a model formulation containing hypromellose acetate succinate (HPMCAS), polyethylene oxide (PEO) and paracetamol and a newly developed hot melt droplet deposition 3D printing method, Arburg plastic free-forming (APF), to examine the porosity effects on in vitro drug release. This is the first study reporting the use of APF on 3D printing porous pharmaceutical tablets. With the unique pellet feeding mechanism of APF, it is important to explore its potential applications in pharmaceutical additive manufacturing. The pores were created by altering the infill percentages (%) of the APF printing between 20 and 100% to generate porous tablets. The printing quality of these porous tablets was examined. The APF printed formulation swelled in pH 1.2 HCl and eroded in pH 6.8 PBS. During the dissolution at pH 1.2, the swelling of the printing pathway led to the gradual decreases in the open pore area and complete closure of pores for the tablets with high infills. In pH 6.8 buffer media, the direct correlation between drug release rate and infills was observed for the tablets printed with infill at and less than 60%. The results revealed that drug release kinetics were controlled by the complex interplay of the porosity and dynamic changes of the tablets caused by swelling and erosion. It also implied the potential impact of fluid hydrodynamics on the in vitro data collection and interpretation of porous solids.

The 24-hour respiratory quotient predicts energy intake and changes in body mass.

To define the relationship between the respiratory quotient (RQ) and energy intake (EI) and to determine the impact of spontaneous locomotor activity (LMA) in the development of diet-induced obesity (DIO), we fed C57BL/6 mice a high-fat diet (HFD) for either 4 days or 17 wk and analyzed them using indirect calorimetry. Importantly, changes in body mass during calorimetry (DeltaM(b)) significantly covaried with RQ and EI; adjusting the data for DeltaM(b) permitted an analysis of the energy-balanced state. The 24-h RQ strongly predicted 24-h EI, and the slope of this relationship was diet dependent (HFD or chow) but independent of the HFD feeding period. Early-stage DIO was characterized by dark-period hyperphagia and fat storage, offset by greater light-period lipid oxidation; later stage DIO mice had a milder hyperphagia and lower substrate flexibility. Consequently, whereas 24-h RQ equaled the food quotient of the HFD in both early- and late-stage DIO, the range of RQ values was negatively correlated with, and mostly explained by, 24-h EI only in late-stage DIO. Lean and early-stage DIO mice had similar LMA values that were reduced in late-stage DIO. However, LMA significantly explained variance in total energy expenditure (EE) in only early-stage DIO mice. This indicated that the link between LMA and EE was a transient adaptive response to early DIO, whereas the later loss of LMA did not explain body weight gain in C57BL/6 DIO mice.

New-onset lone maternal atrial fibrillation: A case report.

RATIONALE: Atrial fibrillation (AF) is encountered rarely in pregnancy. Management of maternal AF is challenging as it poses a threat to both maternal and fetal well-being. PATIENT CONCERNS: We report a case of a 35 weeks pregnant woman who presented in emergency with sudden-onset palpitations and mild shortness of breath with no personal/family history of cardiac diseases. DIAGNOSES: Patient's pulse was irregularly irregular with an average rate of 179 beats per minute. The obstetric examination was normal. DIAGNOSIS: High-sensitive cardiac troponin T (hs-cTnT) was elevated. The 12 lead electrocardiogram (ECG) confirmed AF. The obstetric ultrasound, electronic fetal heart rate (EFHR) trace, and maternal echocardiography were normal. INTERVENTIONS: The patient was admitted under joint cardiology and obstetric care and monitored with continuous telemetry. She was commenced on a therapeutic dose of low-molecular weight heparin (LMWH) and intravenous fluid. She received a single 200 Joule synchronized direct current (DC) shock under general anesthesia in operation theater, which reverted the rhythm back to normal. EFHR monitoring was normal pre- and post-DC cardioversion. We acknowledge the unwise use of therapeutic dose of LMWH before DC cardioversion (DCCV) because of a potential need for emergency cesarean delivery for maternal and/or fetal compromise. OUTCOME: The patient remained well and in sinus rhythm after cardioversion. She was discharged home the following day on Flecainide (anti-arrhythmic) and therapeutic dose of low molecular weight heparin (LMWH) and followed up in outpatient clinics frequently. She had a baby at term and received prophylactic LMWH for 10 days post-cesarean. She was discharged from cardiology clinic when she was 10 weeks postnatal, and Flecainide was discontinued. LESSONS: We are reporting this case because of the rarity of the condition and successful use of DCCV for treating maternal AF. High-sensitive cardiac troponin T (hs-cTnT) level is a useful laboratory indicator to gauge the severity of AF in pregnancy. We emphasize to make the arrangements for EFHR monitoring and potential cesarean delivery and advocate cautious use of thromboprophylaxis while planning for electrical cardioversion (ECV) for maternal AF.

Sirt1 regulates insulin secretion by repressing UCP2 in pancreatic beta cells.

Sir2 and insulin/IGF-1 are the major pathways that impinge upon aging in lower organisms. In Caenorhabditis elegans a possible genetic link between Sir2 and the insulin/IGF-1 pathway has been reported. Here we investigate such a link in mammals. We show that Sirt1 positively regulates insulin secretion in pancreatic beta cells. Sirt1 represses the uncoupling protein (UCP) gene UCP2 by binding directly to the UCP2 promoter. In beta cell lines in which Sirt1 is reduced by SiRNA, UCP2 levels are elevated and insulin secretion is blunted. The up-regulation of UCP2 is associated with a failure of cells to increase ATP levels after glucose stimulation. Knockdown of UCP2 restores the ability to secrete insulin in cells with reduced Sirt1, showing that UCP2 causes the defect in glucose-stimulated insulin secretion. Food deprivation induces UCP2 in mouse pancreas, which may occur via a reduction in NAD (a derivative of niacin) levels in the pancreas and down-regulation of Sirt1. Sirt1 knockout mice display constitutively high UCP2 expression. Our findings show that Sirt1 regulates UCP2 in beta cells to affect insulin secretion.

Inhibition of SIRT1 catalytic activity increases p53 acetylation but does not alter cell survival following DNA damage.

Human SIRT1 is an enzyme that deacetylates the p53 tumor suppressor protein and has been suggested to modulate p53-dependent functions including DNA damage-induced cell death. In this report, we used EX-527, a novel, potent, and specific small-molecule inhibitor of SIRT1 catalytic activity to examine the role of SIRT1 in p53 acetylation and cell survival after DNA damage. Treatment with EX-527 dramatically increased acetylation at lysine 382 of p53 after different types of DNA damage in primary human mammary epithelial cells and several cell lines. Significantly, inhibition of SIRT1 catalytic activity by EX-527 had no effect on cell growth, viability, or p53-controlled gene expression in cells treated with etoposide. Acetyl-p53 was also increased by the histone deacetylase (HDAC) class I/II inhibitor trichostatin A (TSA). EX-527 and TSA acted synergistically to increase acetyl-p53 levels, confirming that p53 acetylation is regulated by both SIRT1 and HDACs. While TSA alone reduced cell survival after DNA damage, the combination of EX-527 and TSA had no further effect on cell viability and growth. These results show that, although SIRT1 deacetylates p53, this does not play a role in cell survival following DNA damage in certain cell lines and primary human mammary epithelial cells.

Crystal structures of the two major aggrecan degrading enzymes, ADAMTS4 and ADAMTS5.

Aggrecanases are now believed to be the principal proteinases responsible for aggrecan degradation in osteoarthritis. Given their potential as a drug target, we solved crystal structures of the two most active human aggrecanase isoforms, ADAMTS4 and ADAMTS5, each in complex with bound inhibitor and one wherein the enzyme is in apo form. These structures show that the unliganded and inhibitor-bound enzymes exhibit two essentially different catalytic-site configurations: an autoinhibited, nonbinding, closed form and an open, binding form. On this basis, we propose that mature aggrecanases exist as an ensemble of at least two isomers, only one of which is proteolytically active.

Improved insulin sensitivity and metabolic flexibility in ghrelin receptor knockout mice.

Stimulation of the ghrelin receptor (GhrR) by ghrelin results in a variety of metabolic changes including increased food intake, fat storage and insulin resistance. Loss of ghrelin signaling is protective against diet-induced obesity, suggesting that ghrelin plays a significant homeostatic role in conditions of metabolic stress. We examined glycemic control in GhrR -/- mice fed a high-fat diet, and used indirect calorimetry to assess fuel substrate usage and energy expenditure. GhrR -/- mice fed a high-fat diet had several measures of greater insulin sensitivity, including: lower fasted blood glucose and plasma insulin, lower %Hb(A1c), lower insulin levels during glucose tolerance tests, and improved performance in hyperinsulinemic-euglycemic and hyperglycemic clamp studies. GhrR -/- mice fed a high-fat diet did not develop hepatic steatosis and had lower total cholesterol, relative to controls. Furthermore, GhrR -/- mice demonstrated a lower intestinal triglyceride secretion rate of dietary lipid. GhrR -/- mice have higher respiratory quotients (RQ), indicating a preference for carbohydrate as fuel. The range of RQ values was wider in GhrR -/- mice, indicating greater metabolic flexibility and insulin sensitivity in these animals. We therefore propose that loss of ghrelin signaling promotes insulin sensitivity and metabolic flexibility, and protects against several fatty diet-induced features of metabolic syndrome due to convergent changes in the intake, absorption and utilization of energy.

Discovery of indoles as potent and selective inhibitors of the deacetylase SIRT1.

High-throughput screening against the human sirtuin SIRT1 led to the discovery of a series of indoles as potent inhibitors that are selective for SIRT1 over other deacetylases and NAD-processing enzymes. The most potent compounds described herein inhibit SIRT1 with IC50 values of 60-100 nM, representing a 500-fold improvement over previously reported SIRT inhibitors. Preparation of enantiomerically pure indole derivatives allowed for their characterization in vitro and in vivo. Kinetic analyses suggest that these inhibitors bind after the release of nicotinamide from the enzyme and prevent the release of deacetylated peptide and O-acetyl-ADP-ribose, the products of enzyme-catalyzed deacetylation. These SIRT1 inhibitors are low molecular weight, cell-permeable, orally bioavailable, and metabolically stable. These compounds provide chemical tools to study the biology of SIRT1 and to explore therapeutic uses for SIRT1 inhibitors.

Energy localization and frequency analysis in the locust ear.

Animal ears are exquisitely adapted to capture sound energy and perform signal analysis. Studying the ear of the locust, we show how frequency signal analysis can be performed solely by using the structural features of the tympanum. Incident sound waves generate mechanical vibrational waves that travel across the tympanum. These waves shoal in a tsunami-like fashion, resulting in energy localization that focuses vibrations onto the mechanosensory neurons in a frequency-dependent manner. Using finite element analysis, we demonstrate that two mechanical properties of the locust tympanum, distributed thickness and tension, are necessary and sufficient to generate frequency-dependent energy localization.