Analysis of Injury Metrics From Experimental Cardiac Injuries From Behind Armor Blunt Trauma Using Live Swine Tests: A Pilot Study.

INTRODUCTION: Warfighters are issued hard body armor designed to defeat ballistic projectiles. The resulting backface deformation can injure different thoracoabdominal organs. Developed over decades ago, the behind armor blunt impact criterion of maximum 44 mm depth in clay continues to be used independent of armor type or impact location on the thoracoabdominal region covered by the armor. Because thoracoabdominal components have different energy absorption capabilities, their mode of failures and mechanical properties are different. These considerations underscore the lack of effectiveness of using the single standard to cover all thoracoabdominal components to represent the same level of injury risk. The objective of this pilot study is to conduct cardiac impact tests with a live animal model and analyze biomechanical injury candidate metrics for behind armor blunt trauma applications. MATERIALS AND METHODS: Live swine tests were conducted after obtaining approvals from the U.S. DoD. Trachea tubes. An intravenous line were introduced into the swine before administering anesthesia. Pressure transducers were inserted into lungs and aorta. An indenter simulating backface deformation profiles produced by body armor from military-relevant ballistics to human cadavers delivered impact to the heart region. The approved test protocol included 6-hour monitoring and necropsies. Indenter accelerometer signals were processed to compute the velocity and deflection, and their peak magnitudes were obtained. The deflection-time signal was normalized with respect to chest depth along the impact axis. The peak magnitude of the viscous criterion, kinetic energy, force, momentum and stiffness were obtained. RESULTS: Out of the 8 specimens, 2 were sham controls. The mean total body mass and soft tissue thickness at the impact site were 81.1 ± 4.1 kg and 3.8 ± 1.1 cm. The peak velocities ranged from 30 to 59 m/s, normalized deflections ranged from 15 to 21%, and energies ranged from 105 to 407 J. The range in momentum and stiffness were 7.0 to 13.9 kg-m/s and 22.3 to 79.9 N/m. The maximum forces and impulse data ranged from 2.9 to 11.7 kN and 1.9 to 5.8 N-s. The peak viscous criterion ranged from 2.0 to 5.3 m/s. One animal did not sustain any injuries, 2 had cardiac injuries, and others had lung and skeletal injuries. CONCLUSIONS: The present study applied blunt impact loads to the live swine cardiac region and determined potential candidate injury metrics for characterization. The sample size of 6 swine produced injuries ranging from none to pure skeletal to pure organ trauma. The viscous criterion metric associated with the response of the animal demonstrated a differing pattern than other variables with increasing velocity. These findings demonstrate that our live animal experimental design can be effectively used with testing additional samples to develop behind armor blunt injury criteria for cardiac trauma in the form of risk curves. Injury criteria obtained for cardiac trauma can be used to enhance the effectiveness of the body armor, reduce morbidity and mortality, and improve warfighter readiness in combat operations.

Behind Armor Blunt Trauma: Liver Injuries Using a Live Animal Model.

INTRODUCTION: While the 44-mm clay penetration criterion was developed in the 1970s for soft body armor applications, and the researchers acknowledged the need to conduct additional tests, the same behind the armor blunt trauma displacement limit is used for both soft and hard body armor evaluations and design considerations. Because the human thoraco-abdominal contents are heterogeneous, have different skeletal coverage, and have different functional requirements, the same level of penetration limit does not imply the same level of protection. It is important to determine the regional responses of different thoraco-abdominal organs to better describe human tolerance and improve the current behind armor blunt trauma standard. The purpose of this study was to report on the methods, procedures, and data collected from swine. MATERIALS AND METHODS: Live swine tests were conducted after obtaining approvals from the local institution and the Army Care and Use Review Office of the U.S. Department of Defense. Trachea tubes and an intravenous line were introduced before administering anesthesia. Pressure transducers were inserted into the lungs and aorta. An indenter simulating the backface deformation profiles produced by body armor from military-relevant ballistics to human cadavers was used to deliver impact loading to the liver region. A triaxial accelerometer was included in the indenter design. The animals were monitored for 6 hours, necropsies were performed, and injuries were identified. Biomechanical data of the energy, velocity, deflection, viscous criterion, force, and impulse variables were obtained for each test. RESULTS: Peak accelerations, velocities, deflections, forces, impulse, and energies ranged from 897 to 5,808 g, 21 to 59 m/s, 1.96 to 8.87 cm, 2.3 to 13.1 kN, 1.1 to 7.1 Ns, and 58 to 387 J, respectively. The peak viscous criterion ranged from 0.8 to 5.8 m/s. All animals survived the 6-hour survival period. Three animals responded with liver lacerations while the remaining 4 did not have any injuries. CONCLUSION: The experimental design based on parallel tests with whole body human cadavers and cadaver swine was found to be successful in delivering controlled impacts to the liver region of live swine and reproducing liver injuries. Previously used biomechanical measures as potential candidates for injury criteria development were obtained. Using this proven model, tests with additional samples are needed to develop injury risk curves for liver impacts and obtain regional (liver) injury criteria.

Matched-pair hybrid test paradigm for behind armor blunt trauma using an experimental animal model.

Background: The current behind armor blunt trauma (BABT) injury criterion uses a single penetration limit of 44 mm in Roma Plastilina clay and is not specific to thoracoabdominal regions. However, different regions in the human body have different injury tolerances. This manuscript presents a matched-pair hybrid test paradigm with different experimental models and candidate metrics to develop regional human injury criteria. Methods: Live and cadaver swine were used as matched pair experimental models. An impactor simulating backface deformation profiles produced by body armor from military-relevant ballistics was used to deliver BABT loading to liver and lung regions in cadaver and live swine. Impact loading was characterized using peak accelerations and energy. For live swine, physiological parameters were monitored for 6 hours, animals were euthanized, and a detailed necropsy was done to identify injuries to skeletal structures, organs and soft tissues. A similar process was used to identify injuries to the cadaver swine for targeted thoracoabdominal regions. Results: Two cadavers and one live swine were subjected to BABT impacts to the liver. One cadaver and one live swine were subjected to BABT impacts to the left lung. Injuries to both regions were similar at similar energies between the cadaver and live models. Conclusions: Swine is an established animal for thoracoabdominal impact studies in automotive standards, although at lower insult levels. Similarities in BABT responses between cadaver and live swine allow for extending testing protocols to human cadavers and for the development of scaling relationships between animal and human cadavers, acting as a hybrid protocol between species and live and cadaver models. Injury tolerances and injury risk curves from live animals can be converted to human tolerances via structural scaling using these outcomes. The present experimental paradigm can be used to develop region-based BABT injury criteria, which are not currently available.